Searcharxiv⌕ Search

arXiv subjects

Aran Garcia-Lekue

Publications and source records attributed to Aran Garcia-Lekue.

At least 19 recordsLinked to original sources
arXiv2024

Twisted nanoporous graphene/graphene bilayers: electronic decoupling and chiral currents

We investigate bilayers of nanoporous graphene (NPG), laterally bonded carbon nanoribbons, and graphene. The electronic and transport properties are explored as a function of the interlayer twist angle using an atomistic tight-binding model combined with non-equilibrium Green's functions. At small twist angles ($θ\lesssim 10^\circ$), NPG and graphene are strongly coupled, as revealed by the hybridization of their electronic bands. As a result, when electrons are point-injected in NPG, a substantial interlayer transmission occurs and an electronic Talbot-like interference pattern appears in the current flow on both layers. Besides, the twist-induced mirror-symmetry-breaking leads to chiral features in the injected current. Upon increasing the twist angle, the coupling is weakened and the monolayer electronic properties are restored. Furthermore, we demonstrate the emergence of resonant peaks in the electronic density of states for small twist angles, allowing to probe the twist-dependent interlayer coupling via scanning tunneling microscopy.

cond-mat.mes-hall↗
arXiv2022

Tunable spin and transport in porphyrin-graphene nanoribbon hybrids

Recently, porphyrin units have been attached to graphene nanoribbons (Por-GNR) enabling a multitude of possible structures. Here we report first principles calculations of two prototypical, experimentally feasible, Por-GNR hybrids, one of which displays a small band gap relevant for its use as electrode in a device. Embedding a Fe atom in the porphyrin causes spin polarization with a spin ground state $S=1$. We employ density functional theory and nonequilibrium Green's function transport calculations to examine a 2-terminal setup involving one Fe-Por-GNR between two metal-free, small band gap, Por-GNR electrodes. The coupling between the Fe-$d$ and GNR band states results in a Fano anti-resonance feature in the spin transport close to the Fermi energy. This feature makes transport highly sensitive to the Fe spin state. We demonstrate how mechanical strain or chemical adsorption on the Fe give rise to a spin-crossover to $S=1$ and $S=0$, respectively, directly reflected in a change in transport. Our theoretical results provide a clue for the on-surface synthesis of Por-GNRs hybrids, which can open a new avenue for carbon-based spintronics and chemical sensing.

cond-mat.mes-hall↗
arXiv2022

Addressing electron spins embedded in metallic graphene nanoribbons

Spin-hosting graphene nanostructures are promising metal-free systems for elementary quantum spintronic devices. Conventionally, spins are protected from quenching by electronic bandgaps, which also hinder electronic access to their quantum state. Here, we present a narrow graphene nanoribbon substitutionally doped with boron heteroatoms that combines a metallic character with the presence of localized spin 1/2 states in its interior. The ribbon was fabricated by on-surface synthesis on a Au(111) substrate. Transport measurements through ribbons suspended between the tip and the sample of a scanning tunnelling microscope revealed their ballistic behavior, characteristic of metallic nanowires. Conductance spectra show fingerprints of localized spin states in form of Kondo resonances and inelastic tunnelling excitations. Density functional theory rationalizes the metallic character of the graphene nanoribbon due to the partial depopulation of the valence band induced by the boron atoms. The transferred charge builds localized magnetic moments around the boron atoms. The orthogonal symmetry of the spin-hosting state's and the valence band's wavefunctions protects them from mixing, maintaining the spin states localized. The combination of ballistic transport and spin localization into a single graphene nanoribbon offers the perspective of electronically addressing and controlling carbon spins in real device architectures.

cond-mat.mes-hall↗
arXiv2021

Topological phase transition in chiral graphene nanoribbons: from edge bands to end states

Precise control over the size and shape of graphene nanostructures allows engineering spin-polarized edge and topological states, representing a novel source of non-conventional $π$-magnetism with promising applications in quantum spintronics. A prerequisite for their emergence is the existence of robust gapped phases, which are difficult to find in extended graphene systems: only armchair graphene nanoribbons (GNRs) show a band gap that, however, closes for any other GNR orientation. Here we show that semi-metallic chiral GNRs (chGNRs) narrowed down to nanometer widths undergoes a topological phase transition, becoming first topological insulators, and transforming then into trivial band insulators for the narrowest chGNRs. We fabricated atomically precise chGNRs of different chirality and size by on surface synthesis using predesigned molecular precursors. Combining scanning tunnelling microscopy (STM) measurements and theory simulations, we follow the evolution of topological properties and bulk band gap depending on the width, length, and chirality of chGNRs. The first emerging gapped phases are topological, protected by a chiral interaction pattern between edges. For narrower ribbons, the symmetry of the interaction pattern changes, and the topological gap closes and re-opens again as a trivial band insulator. Our findings represent a new platform for producing topologically protected spin states and demonstrates the potential of connecting chiral edge and defect structure with band engineering.

cond-mat.mes-hall↗
arXiv2020

Switching From Reactant to Substrate Engineering in the Selective Synthesis of Graphene Nanoribbons

The challenge of synthesizing graphene nanoribbons (GNRs) with atomic precision is currently being pursued along a one-way road, based on the synthesis of adequate molecular precursors that react in predefined ways through self-assembly processes. The synthetic options for GNR generation would multiply by adding a new direction to this readily successful approach, especially if both of them can be combined. We show here how GNR synthesis can be guided by an adequately nanotemplated substrate instead of by the traditionally designed reactants. The structural atomic precision, unachievable to date through top-down methods, is preserved by the self-assembly process. This new strategy s proof-of-concept compares experiments using 4,4 -dibromo-para-terphenyl as molecular precursor on flat Au(111) and stepped Au(322) substrates. As opposed to the former, the periodic steps of the latter drive the selective synthesis of 6 atom-wide armchair GNRs, whose electronic properties have been further characterized in detail by scanning tunneling spectroscopy, angle resolved photoemission and density functional theory calculations.

cond-mat.mtrl-sci↗
arXiv2020

Substrate-Independent Growth of Atomically Precise Chiral Graphene Nanoribbons

Contributing to the need of new graphene nanoribbon (GNR) structures that can be synthesized with atomic precision, we have designed a reactant that renders chiral (3,1) - GNRs after a multi-step reaction including Ullmann coupling and cyclodehydrogenation. The nanoribbon synthesis has been successfully proved on different coinage metals, and the formation process, together with the fingerprints associated to each reaction step, has been studied combining scanning tunnelling microscopy, core-level spectroscopy and density functional calculations. In addition to the GNR chiral edge structure, the substantial GNR lengths achieved and the low processing temperature required to complete the reaction grant this reactant extremely interesting properties for potential applications.

cond-mat.mtrl-sci↗
arXiv2020

Electronic structure tunability by periodic meta-ligand spacing in one-dimensional organic semiconductors

Designing molecular organic semiconductors with distinct frontier orbitals is key for the development of devices with desirable properties. Generating defined organic nanostructures with atomic precision can be accomplished by on-surface synthesis. We use this dry chemistry to introduce topological variations in a conjugated poly-para-phenylene chain in the form of meta-junctions. As evidenced by STM and LEED, we produce a macroscopically ordered, monolayer thin zigzag chain film on a vicinal silver crystal. These cross-conjugated nanostructures are expected to display altered electronic properties, which are now unravelled by highly complementary experimental techniques (ARPES and STS) and theoretical calculations (DFT and EPWE). We find that meta-junctions dominate the weakly dispersive band structure, while the bandgap is tunable by altering the linear segment's length. These periodic topology effects induce significant loss of the electronic coupling between neighboring linear segments leading to partial electron confinement in the form of weakly coupled Quantum Dots. Such periodic quantum interference effects determine the overall semiconducting character and functionality of the chains.

cond-mat.mtrl-sci↗
arXiv2020

Band Depopulation of Graphene Nanoribbons Induced by Chemical Gating with Amino Groups

The electronic properties of graphene nanoribbons (GNRs) can be precisely tuned by chemical doping. Here we demonstrate that amino (NH$_2$) functional groups attached at the edges of chiral GNRs (chGNRs) can efficiently gate the chGNRs and lead to the valence band (VB) depopulation on a metallic surface. The NH$_2$-doped chGNRs are grown by on-surface synthesis on Au(111) using functionalized bianthracene precursors. Scanning tunneling spectroscopy resolves that the NH$_2$ groups significantly up-shift the bands of chGNRs, causing the Fermi level crossing of the VB onset of chGNRs. Through density functional theory simulations we confirm that the hole-doping behavior is due to an upward shift of the bands induced by the edge NH$_2$ groups.

cond-mat.mes-hall↗
arXiv2020

Magnetism of topological boundary states induced by boron substitution in graphene nanoribbons

Graphene nanoribbons (GNRs), low-dimensional platforms for carbon-based electronics, show the promising perspective to also incorporate spin polarization in their conjugated electron system. However, magnetism in GNRs is generally associated to localized states around zigzag edges, difficult to fabricate and with high reactivity. Here we demonstrate that magnetism can also be induced away from physical GNR zigzag edges through atomically precise engineering topological defects in its interior. A pair of substitutional boron atoms inserted in the carbon backbone breaks the conjugation of their topological bands and builds two spin-polarized boundary states around. The spin state was detected in electrical transport measurements through boron-substituted GNRs suspended between tip and sample of a scanning tunneling microscope. First-principle simulations find that boron pairs induce a spin 1, which is modified by tuning the spacing between pairs. Our results demonstrate a route to embed spin chains in GNRs, turning them basic elements of spintronic devices.

cond-mat.mes-hall↗
arXiv2019

Conductance channels of a platform molecule on Au(111) probed with shot noise

The shot noise of the current $I$ through junctions to single trioxatriangulenium cations (TOTA$^+$) on Au(111) is measured with a low temperature scanning tunneling microscope using Au tips. The noise is significantly reduced compared to the Poisson noise power of $2eI$ and varies linearly with the junction conductance. The data are consistent with electron transmission through a single spin-degenerate transport channel and show that TOTA$^+$ in a Au contact does not acquire an unpaired electron. Ab initio calculations reproduce the observations and show that the current involves the lowest unoccupied orbital of the molecule and tip states close to the Fermi level.

cond-mat.mes-hall↗
arXiv2018

Full-scale Simulation of Electron Transport in Nanoporous Graphene: Probing the Talbot Effect

Designing platforms to control phase-coherence and interference of electron waves is a cornerstone for future quantum electronics, computing or sensing. Nanoporous graphene (NPG) consisting of linked graphene nanoribbons has recently been fabricated using molecular precursors and bottom-up assembly [Moreno et al., Science 360, 199 (2018)] opening an avenue for controlling the electronic current in a two-dimensional material. By simulating electron transport in real-sized NPG samples we predict that electron waves injected from the tip of a scanning tunneling microscope (STM) behave similarly to photons in coupled waveguides, displaying a Talbot interference pattern. We link the origins of this effect to the band structure of the NPG and further demonstrate how this pattern may be mapped out by a second STM probe. We enable atomistic parameter-free calculations beyond the 100 nm scale by developing a new multi-scale method where first-principles density functional theory regions are seamlessly embedded into a large-scale tight-binding.

cond-mat.mes-hall↗
arXiv2018

Electronic Properties of Substitutionally Boron-doped Graphene Nanoribbons on a Au(111) Surface

High quality graphene nanoribbons (GNRs) grown by on-surface synthesis strategies with atomic precision can be controllably doped by inserting heteroatoms or chemical groups in the molecular precursors. Here, we study the electronic structure of armchair GNRs substitutionally doped with di-boron moieties at the center, through a combination of scanning tunneling spectroscopy, angle-resolved photoemission, and density functional theory simulations. Boron atoms appear with a small displacement towards the surface signaling their stronger interaction with the metal. We find two boron-rich flat bands emerging as impurity states inside the GNR band gap, one of them particularly broadened after its hybridization with the gold surface states. In addition, the boron atoms shift the conduction and valence bands of the pristine GNR away from the gap edge, and leave unaffected the bands above and below, which become the new frontier bands and have negligible boron character. This is due to the selective mixing of boron states with GNR bands according to their symmetry. Our results depict that the GNRs band structure can be tuned by modifying the separation between di-boron moieties.

cond-mat.mes-hall↗
arXiv2018

Bottom up synthesis of multifunctional nanoporous graphene

Nanosize pores can turn semimetallic graphene into a semiconductor and from being impermeable into the most efficient molecular sieve membrane. However, scaling the pores down to the nanometer, while fulfilling the tight structural constraints imposed by applications, represents an enormous challenge for present top-down strategies. Here we report a bottom-up method to synthesize nanoporous graphene comprising an ordered array of pores separated by ribbons, which can be tuned down to the one nanometer range. The size, density, morphology and chemical composition of the pores are defined with atomic precision by the design of the molecular precursors. Our measurements further reveal a highly anisotropic electronic structure, where orthogonal one-dimensional electronic bands with an energy gap of ~1 eV coexist with confined pore states, making the nanoporous graphene a highly versatile semiconductor for simultaneous sieving and electrical sensing of molecular species.

cond-mat.mtrl-sci↗
arXiv2018

Orbital-selective spin excitation of a magnetic porphyrin

Scattering of electrons by localized spins is the ultimate process enabling electrical detection and control of the magnetic state of a spin-doped material. At the molecular scale, this scattering is mediated by the electronic orbitals hosting the spin. Here we report the selective excitation of a molecular spin by electrons tunneling through different molecular orbitals. Spatially-resolved tunneling spectra on iron porphyrins on Au(111) reveal that the inelastic spin excitation extends beyond the iron site. The inelastic features also change shape and symmetry along the molecule. Combining DFT simulations with a phenomenological scattering model, we show that the extension and lineshape variations of the inelastic signal are due to excitation pathways assisted by different frontier orbitals, each of them with a different degree of hybridization with the surface. By selecting the intramolecular site for electron injection, the relative weight of iron and pyrrole orbitals in the tunneling process is modified. In this way, the spin excitation mechanism, reflected by its spectral lineshape, changes depending on the degree of localization and energy alignment of the chosen molecular orbital.

cond-mat.mes-hall↗
arXiv2017

Unraveling the electronic structure of narrow atomically-precise chiral graphene nanoribbons

Recent advances in graphene nanoribbon-based research have demonstrated the controlled synthesis of chiral graphene nanoribbons (cGNR) with atomic precision using strategies of on-surface chemistry. However their electronic characterization, including typical figures of merit like band gap or frontier bands effective masses, has not yet been reported. In this work, we provide a detailed characterization of (3,1)-cGNRs on Au(111). The structure and epitaxy, as well as the electronic band structure of the ribbons, are analyzed by means of scanning tunneling microscopy and spectroscopy, angle resolved photoemission and density functional theory.

cond-mat.mes-hall↗
arXiv2017

Width-Dependent Band Gap in Armchair Graphene Nanoribbons Reveals Fermi Level Pinning on Au(111)

We report on the energy level alignment evolution of valence and conduction bands of armchair-oriented graphene nanoribbons (aGNR) as their band gap shrinks with increasing width. We use 4,4-dibromo-para-terphenyl as molecular precursor on Au(111) to form extended poly-para-phenylene nanowires, which can be fused sideways to form atomically precise aGNRs of varying widths. We measure the frontier bands by means of scanning tunneling spectroscopy, corroborating that the nanoribbons band gap is inversely proportional to their width. Interestingly, valence bands are found to show Fermi level pinning as the band gap decreases below a threshold value around 1.7 eV. Such behavior is of critical importance to understand the properties of potential contacts in graphene nanoribbon-based devices. Our measurements further reveal a particularly interesting system for studying Fermi level pinning by modifying an adsorbates band gap while maintaining an almost unchanged interface chemistry defined by substrate and adsorbate.

cond-mat.mtrl-sci↗
arXiv2017

On-surface route for producing planar nanographenes with azulene moieties

Large aromatic carbon nanostructures are cornerstone materials due to their increasingly active role in functional devices, but their synthesis in solution encounters size and shape limitations. New on-surface strategies facilitate the synthesis of large and insoluble planar systems with atomic-scale precision. While dehydrogenation is usually the chemical zipping reaction building up large aromatic carbon structures, mostly benzenoid structures are being produced. Here, we report on a new cyclodehydrogenation reaction transforming a sterically stressed precursor with conjoined cove regions into planar carbon platform by incorporating azulene moieties in their interior. Submolecular resolution STM is used to characterize this exotic large polycyclic aromatic compound on Au(111) yielding unprecedented insight into a dehydrogenative intramolecular aryl-aryl coupling reaction. The resulting polycyclic aromatic carbon structure shows a [18]annulene core hosting peculiar pore states confined at the carbon cavity.

cond-mat.mes-hall↗