Searcharxiv⌕ Search

arXiv subjects

Arash Asadi

Publications and source records attributed to Arash Asadi.

30 records · Page 2Linked to original sources

Safehaul: Risk-Averse Learning for Reliable mmWave Self-Backhauling in 6G Networks

Wireless backhauling at millimeter-wave frequencies (mmWave) in static scenarios is a well-established practice in cellular networks. However, highly directional and adaptive beamforming in today's mmWave systems have opened new possibilities for self-backhauling. Tapping into this potential, 3GPP has standardized Integrated Access and Backhaul (IAB) allowing the same base station serve both access and backhaul traffic. Although much more cost-effective and flexible, resource allocation and path selection in IAB mmWave networks is a formidable task. To date, prior works have addressed this challenge through a plethora of classic optimization and learning methods, generally optimizing a Key Performance Indicator (KPI) such as throughput, latency, and fairness, and little attention has been paid to the reliability of the KPI. We propose Safehaul, a risk-averse learning-based solution for IAB mmWave networks. In addition to optimizing average performance, Safehaul ensures reliability by minimizing the losses in the tail of the performance distribution. We develop a novel simulator and show via extensive simulations that Safehaul not only reduces the latency by up to 43.2% compared to the benchmarks but also exhibits significantly more reliable performance (e.g., 71.4% less variance in achieved latency).

cs.NI↗

Designing, Building, and Characterizing RF Switch-based Reconfigurable Intelligent Surfaces

In this paper, we present our experience designing, prototyping, and empirically characterizing RF Switch-based Reconfigurable Intelligent Surfaces (RIS). Our RIS design comprises arrays of patch antennas, delay lines and programmable radio-frequency (RF) switches that enable passive 3D beamforming, i.e., without active RF components. We implement this design using PCB technology and low-cost electronic components, and thoroughly validate our prototype in a controlled environment with high spatial resolution codebooks. Finally, we make available a large dataset with a complete characterization of our RIS and present the costs associated with reproducing our design.

eess.SY↗

Stay Connected, Leave no Trace: Enhancing Security and Privacy in WiFi via Obfuscating Radiometric Fingerprints

The intrinsic hardware imperfection of WiFi chipsets manifests itself in the transmitted signal, leading to a unique radiometric fingerprint. This fingerprint can be used as an additional means of authentication to enhance security. In fact, recent works propose practical fingerprinting solutions that can be readily implemented in commercial-off-the-shelf devices. In this paper, we prove analytically and experimentally that these solutions are highly vulnerable to impersonation attacks. We also demonstrate that such a unique device-based signature can be abused to violate privacy by tracking the user device, and, as of today, users do not have any means to prevent such privacy attacks other than turning off the device. We propose RF-Veil, a radiometric fingerprinting solution that not only is robust against impersonation attacks but also protects user privacy by obfuscating the radiometric fingerprint of the transmitter for non-legitimate receivers. Specifically, we introduce a randomized pattern of phase errors to the transmitted signal such that only the intended receiver can extract the original fingerprint of the transmitter. In a series of experiments and analyses, we expose the vulnerability of adopting naive randomization to statistical attacks and introduce countermeasures. Finally, we show the efficacy of RF-Veil experimentally in protecting user privacy and enhancing security. More importantly, our proposed solution allows communicating with other devices, which do not employ RF-Veil.

cs.CR↗

An Analytical Framework for mmWave-Enabled V2X Caching

Autonomous vehicles will rely heavily on vehicle-to-everything (V2X) communications to obtain a large amount of information required for navigation and road safety purposes. This can be achieved through: (i) leveraging millimeter-wave (mmWave) frequencies to achieve multi- Gbps data rates, and (ii) exploiting the temporal and spatial correlation of vehicular contents to offload a portion of the traffic from the infrastructure via caching. Characterizing such a system under mmWave directional beamforming, high vehicular mobility, channel fluctuations, and different caching strategies is a complex task. In this article, we propose the first stochastic geometry framework for caching in mmWave V2X networks, which is validated via rigorous Monte Carlo simulation. In addition to common parameters considered in stochastic geometry models, our derivations account for caching as well as the speed and the trajectory of the vehicles. Furthermore, our evaluations provide interesting design insights: (i) higher base station/vehicle densities does not necessarily improve caching performance; (ii) although using a narrower beam leads to a higher SINR, it also reduces the connectivity probability; and (iii) V2X caching can be an inexpensive way of compensating some of the unwanted mmWave channel characteristics.

cs.NI↗

Stochastic Modeling of Beam Management in mmWave Vehicular Networks

Mobility management is a major challenge for the wide-spread deployment of millimeter-wave (mmWave) cellular networks. In particular, directional beamforming in mmWave devices renders high-speed mobility support very complex. This complexity, however, is not limited to system design but also the performance estimation and evaluation. Hence, some have turned their attention to stochastic modeling of mmWave vehicular communication to derive closed-form expressions characterizing the coverage and rate behavior of the network. In this article, we model and analyze the beam management for mmWave vehicular networks. To the best of our knowledge, this is the first work that goes beyond coverage and rate analysis. Specifically, we focus on a multi-lane divided highway scenario in which base stations and vehicles are present on both sides of the highway. In addition to providing analytical expressions for the average number of beam switching and handover events, we provide design insights for the network operators to fine-tune their network within the flexibility provided by the standard in the choice of system parameters, including the number of resources dedicated to channel feedback and beam alignment operations.

eess.SP↗

A Channel Measurement Campaign for mmWave Communication in Industrial Settings

Industry 4.0 relies heavily on wireless technologies. Energy efficiency and device cost have played a significant role in the initial design of such wireless systems for industry automation. However, high reliability, high throughput, and low latency are also key for certain sectors such as the manufacturing industry. In this sense, existing wireless solutions for industrial settings are limited. Emerging technologies such as millimeter-wave (mmWave) communication are highly promising to address this bottleneck. Still, the propagation characteristics at such high frequencies in harsh industrial settings are not well understood. Related work in this area is limited to isolated measurements in specific scenarios. In this work, we carry out an extensive measurement campaign in highly representative industrial environments. Most importantly, we derive the statistical distributions of the channel parameters of widely accepted mmWave channel models that fit these environments. This is a highly valuable contribution, since researchers in this field can use our empirical model to understand the performance of their mmWave systems in typical industrial settings. Beyond analyzing and discussing our insights, with this paper we also shareoour extensive dataset with the research community.

cs.NI↗

DORE: An Experimental Framework to Enable Outband D2D Relay in Cellular Networks

Device-to-Device communications represent a paradigm shift in cellular networks. In particular, analytical results on D2D performance for offloading and relay are very promising, but no experimental evidence validates these results to date. This paper is the first to provide an experimental analysis of outband D2D relay schemes. Moreover, we design DORE, a complete framework for handling channel opportunities offered by outband D2D relay nodes. DORE consists of resource allocation optimization tools and protocols suitable to integrate QoS-aware opportunistic D2D communications within the architecture of 3GPP Proximity-based Services. We implement DORE using an SDR framework to profile cellular network dynamics in the presence of opportunistic outband D2D communication schemes. Our experiments reveal that outband D2D communications are suitable for relaying in a large variety of delay-sensitive cellular applications, and that DORE enables notable gains even with a few active D2D relay nodes.

cs.NI↗

Opportunistic Device-to-Device Communication in Cellular networks: From Theory to Practice

This dissertation studies different aspects of D2D communications and its impact on the key performance indicators of the network. We design an architecture for the collaboration of cellular users by means of timely exploited D2D opportunities. We begin by presenting the analytical study on opportunistic outband D2D communications. The study reveals the great potential of opportunistic outband D2D communications for enhancing energy efficiency, fairness, and capacity of cellular networks when groups of D2D users can be form and managed in the cellular network. Then we introduce a protocol that is compatible with the latest release of IEEE and 3GPP standards and allows for implementation of our proposal in a today's cellular network. To validate our analytical findings, we use our experimental Software Defined Radio (SDR)-based testbed to further study our proposal in a real world scenario. The experimental results confirm the outstanding potential of opportunistic outband D2D communications. Finally, we investigate the performance merits and disadvantages of different D2D modes. Our investigation reveals, despite the common belief, that all D2D modes are complementary and their merits are scenario based.

cs.NI↗

Modeling Multi-mode D2D Communications in LTE

In this work we propose a roadmap towards the analytical understanding of Device-to-Device (D2D) communications in LTE-A networks. Various D2D solutions have been proposed, which include inband and outband D2D transmission modes, each of which exhibits different pros and cons in terms of complexity, interference, and spectral efficiency achieved. We go beyond traditional mode optimization and mode-selection schemes. Specifically, we formulate a general problem for the joint per-user mode selection, connection activation and resource scheduling of connections.

cs.NI↗

A Survey on Device-to-Device Communication in Cellular Networks

Device-to-Device (D2D) communication was initially proposed in cellular networks as a new paradigm to enhance network performance. The emergence of new applications such as content distribution and location-aware advertisement introduced new use-cases for D2D communications in cellular networks. The initial studies showed that D2D communication has advantages such as increased spectral efficiency and reduced communication delay. However, this communication mode introduces complications in terms of interference control overhead and protocols that are still open research problems. The feasibility of D2D communications in LTE-A is being studied by academia, industry, and the standardization bodies. To date, there are more than 100 papers available on D2D communications in cellular networks and, there is no survey on this field. In this article, we provide a taxonomy based on the D2D communicating spectrum and review the available literature extensively under the proposed taxonomy. Moreover, we provide new insights to the over-explored and under-explored areas which lead us to identify open research problems of D2D communication in cellular networks.

cs.GT↗

Chip-Firing and Riemann-Roch Theory for Directed Graphs

We investigate Riemann-Roch theory for directed graphs. The Riemann-Roch criteria of Amini and Manjunath is generalized to all integer lattices orthogonal to some positive vector. Using generalized notions of a $v_0$-reduced divisor and Dhar's algorithm we investigate two chip-firing games coming from the rows and columns of the Laplacian of a strongly connected directed graph. We discuss how the "column" chip-firing game is related to directed $\vec{G}$-parking functions and the "row" chip-firing game is related to the sandpile model. We conclude with a discussion of arithmetical graphs, which after a simple transformation may be viewed as a special class of directed graphs which will always have the Riemann-Roch property for the column chip-firing game. Examples of arithmetical graphs are provided which demonstrate that either, both, or neither of the two Riemann-Roch conditions may be satisfied for the row chip-firing game.

math.CO↗