arXiv subjects

Aravind Nagulu

Publications and source records attributed to Aravind Nagulu.

5 recordsLinked to original sources

arXiv2026

A 0.74-mW K$_u$-band Cryogenic SiGe LNA in 130-nm BiCMOS with 14-K Noise Temperature for Scalable Quantum Readout

This paper presents a sub-milliwatt K$_u$-band cryogenic low-noise amplifier (LNA) implemented in GlobalFoundries (GF) 130CBIC SiGe BiCMOS, intended for a sub-Kelvin qubit readout chain integrating a JPA and SiGe LNA on the Still stage. The four-stage cascode LNA features balun-coupled interstage matching with a Q-enhanced resonance tank controlled by 2-bit switches tank for frequency tuning and a voltage-controlled cross-coupled negative-$g_m$ cell. The operating point of the Q-cell is optimized at each temperature stage to achieve the best in-band performance under a stable condition. Characterized at 2.5 K for the initial demonstration, the LNA achieves an average noise temperature of $\sim$14 K across 12-18 GHz and 28 dB peak gain around 16.5 GHz, while consuming only 0.74 mW. To the authors' knowledge, this is the lowest reported DC power for a K$_u$-band cryogenic SiGe LNA.

eess.SY↗

arXiv2025

Maximum-Entropy Analog Computing Approaching ExaOPS-per-Watt Energy-efficiency at the RF-Edge

In this paper, we demonstrate how the physics of entropy production, when combined with symmetry constraints, can be used for implementing high-performance and energy-efficient analog computing systems. At the core of the proposed framework is a generalized maximum-entropy principle that can describe the evolution of a mesoscopic physical system formed by an interconnected ensemble of analog elements, including devices that can be readily fabricated on standard integrated circuit technology. We show that the maximum-entropy state of this ensemble corresponds to a margin-propagation (MP) distribution and can be used for computing correlations and inner products as the ensemble's macroscopic properties. Furthermore, the limits of computational throughput and energy efficiency can be pushed by extending the framework to non-equilibrium or transient operating conditions, which we demonstrate using a proof-of-concept radio-frequency (RF) correlator integrated circuit fabricated in a 22 nm SOI CMOS process. The measured results show a compute efficiency greater than 2 Peta ($10^{15}$) Bit Operations per second per Watt (PetaOPS/W) at 8-bit precision and greater than 0.8 Exa ($10^{18}$) Bit Operations per second per Watt (ExaOPS/W) at 3-bit precision for RF data sampled at rates greater than 4 GS/s. Using the fabricated prototypes, we also showcase several real-world RF applications at the edge, including spectrum sensing, and code-domain communications.

cs.NE↗

arXiv2023

Superconducting Non-Reciprocity Based on Time-Modulated Coupled-Resonator Systems

We present a unified approach for designing a diverse range of superconducting non-reciprocal components, including circulators, isolators, and uni-directional amplifiers, based on temporally-modulated coupled resonator networks. Our method leverages standard SQUID-based resonators as building blocks, arranged in various configurations such as series-coupled, wye-connected, and lattice-coupled resonators, to realize a wide range of on-chip non-reciprocal devices. Our theoretical studies demonstrated the effectiveness of the proposed approach, achieving circulators and isolators with near-zero insertion losses and isolation greater than 20 dB, and directional amplifiers with forward gain exceeding 10 dB and reverse isolation greater than 20 dB. To validate our findings, we implemented and measured a series-coupled three-resonator superconducting isolator using a single-layer superconducting process. At a base temperature of 20 mK, our device exhibited insertion loss of 1.3 dB in the forward direction, and isolation of up to 25 dB at the center frequency and greater than 15 dB across a bandwidth of 250 MHz in the reverse direction. Our approach promises to enable the design of a broad range of high-performance non-reciprocal devices for superconducting circuits.

quant-ph↗

arXiv2018

Integrated Conductivity-Modulation-Based RF Magnetic-Free Non-Reciprocal Components: Recent Results and Benchmarking

Achieving non-reciprocity and building nonreciprocal components through spatio-temporal modulation of material properties has attracted a lot of attention in the recent past as an alternative to the more traditional approach of exploiting Faraday rotation in magnetic materials. In this letter, we review recent research on spatio-temporal conductivity-modulation, which enables low-loss, small-footprint, wide-bandwidth and high-power-handling non-reciprocal components operating from radio frequencies (RF) to millimeter-waves (mm-waves) and integrated in a CMOS platform. Four generations of non-reciprocal circulators and circulator-based systems will be reviewed. We will also discuss metrics of performance that are important for wireless applications and standards, and introduce a new antenna (ANT) interface efficiency figure of merit ($η_{ANT}$) to enable a fair comparison between various types of antenna interfaces.

physics.app-ph↗

arXiv2018

Non-reciprocal Components Based on Switched Transmission Lines

Non-reciprocal components, such as isolators and circulators, are critical to wireless communication and radar applications. Traditionally, non-reciprocal components have been implemented using ferrite materials, which exhibit non-reciprocity under the influence of an external magnetic field. However, ferrite materials cannot be integrated into IC fabrication processes, and consequently are bulky and expensive. In the recent past, there has been strong interest in achieving non-reciprocity in a non-magnetic IC-compatible fashion using spatio-temporal modulation. In this paper, we present a general approach to non-reciprocity based on switched transmission lines. Switched transmission lines enable broadband, lossless and compact non-reciprocity, and a wide range of non-reciprocal functionalities, including non-reciprocal phase shifters, ultra-broadband gyrators and isolators, frequency-conversion isolators, and high-linearity/high-frequency/ultra-broadband circulators. We present a detailed theoretical analysis of the various non-idealities that impact insertion loss and provide design guidelines. The theory is validated by experimental results from discrete-component-based gyrators and isolators, and a 25GHz circulator fabricated in 45nm SOI CMOS technology.

eess.SP↗