arXiv subjects

Aritoki Suzuki

Publications and source records attributed to Aritoki Suzuki.

At least 19 recordsLinked to original sources

arXiv2026

Joint Estimation of Properties of the Lunar Subsurface and Galactic Foregrounds with LuSEE-Night

The Lunar Surface Electromagnetics Experiment (LuSEE-Night) is a joint NASA-DOE-ESA low-frequency radio telescope that will reach the lunar far side in 2027. The unknown dielectric properties of the subsurface at the LuSEE-Night landing site impose the most significant limitation for precision instrument calibration, as reflections from the lunar subsurface can change the primary beam at the 10-20% level. Simulations of these effects have provided insight and concern, showing that the lunar subsurface modeled as a lossy dielectric can absorb a large amount of the power of the sky signal. While this absorption may not strongly impact the signal-to-noise ratio in a sky-noise-dominated regime, it could complicate the beam pattern and make the signal more difficult to model and interpret. We have simulated the far-field properties of the LuSEE-Night beam for varying dielectric profiles of the lunar subsurface. We find that varying the properties of the lunar subsurface has the most significant impact around the antenna resonance, impacting its amplitude, position and width. Conversely, changing the properties of the foreground impacts the data across the band. We use a Bayesian inference pipeline to jointly estimate parameters of a galactic foreground model and dielectric properties of the lunar subsurface around the LuSEE-Night landing site and find that parameters of both the galaxy and subsurface properties can be estimated jointly. While the modeling is somewhat idealized, we believe that the results are largely robust owing to the fact that spectral variations for plausible subsurface and galaxy models have very different spectral signatures.

astro-ph.IM↗

arXiv2026

Development Status of the KIPM Detector Consortium

A Kinetic Inductance Phonon-Mediated Detector is a calorimeter that uses kinetic inductance detectors to read out phonon signals from the device substrate. We have established a consortium comprising university and national lab groups dedicated to advancing the state of the art in these detectors, with the ultimate goal of designing a detector sub-eV threshold on energy deposited in the substrate, enabling searches for both light dark matter and low-energy neutrino interactions. This consortium brings together experts in kinetic inductance detector design, phonon and quasiparticle dynamics, and noise modeling, along with specialized fabrication facilities, test platforms, and unique calibration capabilities. Recently, our consortium has demonstrated a resolution on energy absorbed by the sensor of 2.1 eV, the current record for such devices. The current focus of the consortium is modeling and improving the phonon collection efficiency and implementing low-$\boldsymbol{T_c}$ superconductors, both of which serve to improve the overall energy resolution and threshold of the detectors.

physics.ins-det↗

arXiv2026

High efficiency superconducting filterbank with impedance-defined resolution for millimeter-wave spectroscopy

We present a high efficiency, moderate resolution on-chip superconducting filterbank spectrometer designed for line intensity mapping and broadband wave-like dark matter searches. Existing implementations used by the millimeter-wave community rely on resistive feedline termination for standing wave mitigation which caps the per-channel efficiency $\eta_\mathrm{ch}$ at 50\% and utilize microstrip resonators which highly couple the resolving power $\mathcal{R}=\nu/\delta\nu$ and $\eta_\mathrm{ch}$ to thin-film dielectric loss. The architecture presented in this paper addresses these limitations by eliminating the termination resistor and employing niobium coplanar waveguide resonators patterned directly on single-crystal silicon, which fixes the resonator's internal quality factor by the silicon substrate property rather than by the loss tangent of a deposited film. The resolving power is set by the impedance ratio between the resonator and feedline. Electromagnetic and circuit simulations of a ten-channel filterbank near 90~GHz at unity oversampling show $\mathcal{R}=1170$ and $\eta_\mathrm{ch}> 78\%$, with no significant trend in efficiency across channels. A ten-channel prototype, designed for $\mathcal{R}=92\pm5$ and $\eta_\mathrm{ch}=(81\pm3)\%$ over 90--106~GHz with a 560~nm interlayer based on simulations, was fabricated and optically characterized, yielding $\mathcal{R}=208\pm74$ and $\eta_\mathrm{ch}=(77\pm6)\%$. Measured $\eta_\mathrm{ch}$ well above the 50\% termination limit, together with demonstrated impedance tuning of $\mathcal{R}$, validate the design principles of this filterbank spectrometer and establishes a route to high-efficiency, high-resolution on-chip spectrometer arrays.

astro-ph.IM↗

arXiv2026

Linear map-making with LuSEE-Night

LuSEE-Night is a pathfinder radio telescope on the lunar far side employing four 3-m monopole antennas arranged as two horizontal cross pseudo-dipoles on a rotational stage and sensitive to the radio sky in the 1-50 MHz frequency band. LuSEE-Night measures the corresponding 16 correlation products as a function of frequency. While each antenna combination measures radiation coming from a large area of the sky, their aggregate information as a function of phase in the lunar cycle and rotational stage position can be deconvolved into a low-resolution map of the sky. We study this deconvolution using linear map-making based on the Wiener filter algorithm. We illustrate how systematic effects can be effectively marginalised over as contributions to the noise covariance and demonstrate this technique on beam knowledge uncertainty and gain fluctuations. With reasonable assumptions about instrument performance, we show that LuSEE-Night should be able to map the sub-50 MHz sky at a ~5-degree resolution.

astro-ph.IM↗

arXiv2026

Electrical coupling of a horizontal dipole antenna to a dielectric half-space: applications to radio astronomy from the lunar surface

The far side of the Moon, shielded from terrestrial radio frequency interference and beyond the influence of Earth's ionosphere, should offer a uniquely quiet environment for radio astronomy and cosmological experiments. The radio sky below 30 MHz is largely unexplored and is thought to contain spectral signatures of new physics in the early, high-redshift Universe. Achieving precision measurements in this band requires accurate understanding of antenna performance and systematics. For upcoming lunar surface radio astronomy missions, this modeling will be challenging because antennas will deploy at heights that are only a small fraction of a wavelength above the lunar regolith, where strong coupling between the antenna and the surface can significantly alter impedance, radiation patterns, and efficiency. The challenge is compounded by the layered dielectric structure of the regolith and the tendency for permittivity to increase with depth, both of which are difficult to represent faithfully in numerical simulations. In this work, we review theoretical predictions for the behavior of a simple horizontal dipole above a dielectric half-space, representing the lunar regolith, and compare them with simulation results obtained using the Ansys HFSS integral equation solver. We quantify how the antenna impedance and beam pattern couple to the sky for a representative lunar surface radio astronomy experiment. The results show that surface induced effects decrease rapidly, even for modest increases in antenna height above the regolith. Conversely, a dipole antenna placed on or very near the lunar surface will exhibit complex spectral response that renders systematics control very difficult without detailed information on regolith properties.

astro-ph.IM↗

arXiv2025

Readout noise of digital frequency multiplexed TES detectors for CUPID

Superconducting transition-edge sensor (TES) detectors have been the standard in Cosmic Microwave Background experiments for almost two decades and are now being adapted for use in nuclear physics, such as neutrinoless double beta decay searches. In this paper we focus on a new high-bandwidth frequency multiplexed TES readout system developed for CUPID, a neutrinoless double beta decay experiment that will replace CUORE. In order to achieve the high energy resolution requirements for CUPID, the readout noise of the system must be kept to a minimum. Low TES operating resistance and long wiring between the readout SQUID and the warm electronics are needed for CUPID, prompting a careful consideration of the design parameters of this application of frequency multiplexing. In this work, we characterize the readout noise of the newly designed frequency multiplexed TES readout system for CUPID and construct a noise model to understand it. We find that current sharing between the SQUID coil impedance and other branches of the circuit, as well as the long output wiring, worsen the readout noise of the system. To meet noise requirements, a SQUID with a low input inductance, high transimpedance and/or low dynamic impedance is needed, and the wiring capacitance should be kept as small as possible. Alternatively, the option of adding a cryogenic low-noise amplifier at the output of the SQUID should be explored.

physics.ins-det↗

arXiv2025

Laser ablated sub-wavelength structure anti-reflection coating on an alumina lens

We used laser ablation to fabricate sub-wavelength structure anti-reflection coating (SWS-ARC) on a 5 cm diameter alumina lens. With an aspect ratio of 2.5, the SWS-ARC are designed to give a broad-band low reflectance response between 110 and 290 GHz. SWS shape measurements conducted on both sides of the lens give 303 $μ$m pitch and total height between 750 and 790 $μ$m, matching or exceeding the aspect ratio design values. Millimeter-wave transmittance measurements in a band between 140 and 260 GHz show the increase in transmittance expected with the ARC when compared to finite element analysis electromagnetic simulations. To our knowledge, this is the first demonstration of SWS-ARC on an alumina lens, opening the path for implementing the technique for larger diameter lenses.

astro-ph.IM↗

arXiv2025

Modified crossed Dragone optical design of the LiteBIRD low-frequency telescope

LiteBIRD is a JAXA-led international project aimed at measuring the cosmic microwave background (CMB) polarization with high sensitivity to detect polarization $B$ modes. This detection would provide evidence of inflation. LiteBIRD will observe the full sky for three years at the L2 Lagrange point of the Earth-Sun system across 34-448 GHz, and is expected to launch in the Japanese fiscal year of 2032. The Low-Frequency Telescope (LFT) will observe in the 34-161 GHz range implementing a modified crossed Dragone (MCD) reflective optical design optimized for high optical performance across a wide $18^{\circ} \times 9^{\circ}$ field-of-view (FOV). In this paper, we report the LFT optical design details including its optimization and optical performance assessed using optical simulations. The MCD design consists of a paraboloidal primary and a hyperboloidal secondary reflector with polynomial correction terms up to 7th order, achieving Strehl ratios $\ge 0.97$ at 161 GHz across the FOV. The Mueller QU (UQ) cross-polarization response is $\le -26.9$ dB at 34 GHz. The simulated beam sizes are $< 78^{\prime}$ at 34 GHz. The simulated sidelobe response for the direct and diffuse triple reflection sidelobes are estimated to be $< -57$ dB, and for the focused triple reflection sidelobe $< -37$ dB at 34 GHz. The LFT optical design satisfies all the optical requirements and specifications for the project, and is compatible with the LiteBIRD science goals.

astro-ph.IM↗

arXiv2025

Low Tc Hafnium Kinetic Inductance Device with High Internal Quality Factor

Kinetic inductance devices (KIDs) are superconducting resonators with high kinetic inductance sensitive to external energy perturbations. KIDs made with superconductors having $T_c$ far below one Kelvin are of particular interest for sensing minuscule signals, such as light dark matter detection and millimeter wave telescopes for astronomy and cosmology. In this work, we report the promising performance of KIDs fabricated with Hafnium from heated sputter depositions. The KIDs have $T_c$ lower than 249$\pm$2 mK, the internal quality factor ($Q_i$) of the resonators exceeds $10^5$ and the temperature dependence of the resonances can be described by the generalized Mattis-Bardeen model with a disorder parameter $Γ=4\times10^{-3}Δ_0$. Post-fabrication annealing at temperatures above the deposition temperature can further reduce the $T_c$ and $Γ$ without reducing $Q_i$, leading to improvements in energy resolution.

hep-ex↗

arXiv2024

The Simons Observatory: Design, Optimization, and Performance of Low Frequency Detectors

The Simons Observatory (SO) is a cosmic microwave background (CMB) experiment located in the Atacama Desert in Chile that will make precise temperature and polarization measurements over six spectral bands ranging from 27 to 285 GHz. Three small aperture telescopes (SATs) and one large aperture telescope (LAT) will house $\sim$60,000 detectors and cover angular scales between one arcminute and tens of degrees. We present the performance of the dichroic, low-frequency (LF) lenslet-coupled sinuous antenna transition-edge sensor (TES) bolometer arrays with bands centered at 27 and 39 GHz. The LF focal plane will primarily characterize Galactic synchrotron emission as a critical part of foreground subtraction from CMB data. We will discuss the design, optimization, and current testing status of these pixels.

astro-ph.IM↗

arXiv2024

A Stress Induced Source of Phonon Bursts and Quasiparticle Poisoning

The performance of superconducting qubits is degraded by a poorly characterized set of energy sources breaking the Cooper pairs responsible for superconductivity, creating a condition often called ``quasiparticle poisoning". Both superconducting qubits and low threshold dark matter calorimeters have observed excess bursts of quasiparticles or phonons that decrease in rate with time. Here, we show that a silicon crystal glued to its holder exhibits a rate of low-energy phonon events that is more than two orders of magnitude larger than in a functionally identical crystal suspended from its holder in a low-stress state. The excess phonon event rate in the glued crystal decreases with time since cooldown, consistent with a source of phonon bursts which contributes to quasiparticle poisoning in quantum circuits and the low-energy events observed in cryogenic calorimeters. We argue that relaxation of thermally induced stress between the glue and crystal is the source of these events.

physics.ins-det↗

arXiv2024

Development of the Low Frequency Telescope focal plane detector arrays for LiteBIRD

LiteBIRD, a forthcoming JAXA mission, aims to accurately study the microwave sky within the 40-400 GHz frequency range divided into 15 distinct nominal bands. The primary objective is to constrain the CMB inflationary signal, specifically the primordial B-modes. LiteBIRD targets the CMB B-mode signal on large angular scales, where the primordial inflationary signal is expected to dominate, with the goal of reaching a tensor-to-scalar ratio sensitivity of $σ_r\sim0.001$. LiteBIRD frequency bands will be split among three telescopes, with some overlap between telescopes for better control of systematic effects. Here we report on the development status of the detector arrays for the Low Frequency Telescope (LFT), which spans the 34-161 GHz range, with 12 bands subdivided between four types of trichroic pixels consisting of lenslet-coupled sinuous antennas. The signal from the antenna is bandpass filtered and sensed by AlMn Transition-Edge Sensors (TES). We provide an update on the status of the design and development of LiteBIRD's LFT LF1 (40-60-78 GHz), LF2 (50-68-89 GHz) pixels. We discuss design choices motivated by LiteBIRD scientific goals. In particular we focus on the details of the optimization of the design parameters of the sinuous antenna, on-chip bandpass filters, cross-under and impedance transformers and all the RF components that define the LF1 and LF2 pixel detection chain. We present this work in the context of the technical challenges and physical constraints imposed by the finite size of the instrument.

astro-ph.IM↗

arXiv2024

A Method of Measuring TES Complex ETF Response in Frequency-domain Multiplexed Readout by Single Sideband Power Modulation

The digital frequency domain multiplexing (DfMux) technique is widely used for astrophysical instruments with large detector arrays. Detailed detector characterization is required for instrument calibration and systematics control. We conduct the TES complex electrothermal-feedback (ETF) response measurement with the DfMux readout system as follows. By injecting a single sideband signal, we induce modulation in TES power dissipation over a frequency range encompassing the detector response. The modulated current signal induced by TES heating effect is measured, allowing for the ETF response characterization of the detector. With the injection of an upper sideband, the TES readout current shows both an upper and a lower sideband. We model the upper and lower sideband complex ETF response and verify the model by fitting to experimental data. The model not only can fit for certain physical parameters of the detector, such as loop gain, temperature sensitivity, current sensitivity, and time constant, but also enables us to estimate the systematic effect introduced by the multiplexed readout. The method is therefore useful for in-situ detector calibration and for estimating systematic effects during astronomical telescope observations, such as those performed by the upcoming LiteBIRD satellite.

astro-ph.IM↗

arXiv2023

Broadband plasma spray anti-reflection coating technology for millimeter-wave astrophysics

We present a broadband plasma spray anti-reflection (AR) coating technology for millimeter-wave astrophysics experiments with large-format, cryogenic optics. By plasma spraying alumina- and silica-based powders, we have produced coatings of tunable index of refraction and thickness, low loss, and coefficient of thermal expansion matched to alumina substrates. We demonstrate two-layer AR coatings on alumina with reflection below 5% over 82% and 69% fractional bandwidths for 90/150 and 220/280 GHz passband designs, respectively, and band-averaged absorption loss reduced to ~1% at 100 K for both AR coatings. We describe the design, tolerance, fabrication process, and optical measurements of these AR coatings.

astro-ph.IM↗

arXiv2023

LuSEE 'Night': The Lunar Surface Electromagnetics Experiment

The Lunar Surface Electromagnetics Explorer 'LuSEE Night' is a low frequency radio astronomy experiment that will be delivered to the farside of the Moon by the NASA Commercial Lunar Payload Services (CLPS) program in late 2025 or early 2026. The payload system is being developed jointly by NASA and the US Department of Energy (DOE) and consists of a 4 channel, 50 MHz Nyquist baseband receiver system and 2 orthogonal $\sim$6m tip-to-tip electric dipole antennas. LuSEE Night will enjoy standalone operations through the lunar night, without the electromagnetic interference (EMI) of an operating lander system and antipodal to our noisy home planet.

astro-ph.IM↗

arXiv2022

Development of the Low Frequency Telescope Focal Plane Detector Modules for LiteBIRD

LiteBIRD is a JAXA-led strategic large-class satellite mission designed to measure the polarization of the cosmic microwave background and Galactic foregrounds from 34 to 448 GHz across the entire sky from L2 in the late 2020s. The scientific payload includes three telescopes which are called the low-, mid-, and high-frequency telescopes each with their own receiver that covers a portion of the mission's frequency range. The low frequency telescope will map synchrotron radiation from the Galactic foreground and the cosmic microwave background. We discuss the design, fabrication, and characterization of the low-frequency focal plane modules for low-frequency telescope, which has a total bandwidth ranging from 34 to 161 GHz. There will be a total of 4 different pixel types with 8 overlapping bands to cover the full frequency range. These modules are housed in a single low-frequency focal plane unit which provides thermal isolation, mechanical support, and radiative baffling for the detectors. The module design implements multi-chroic lenslet-coupled sinuous antenna arrays coupled to transition edge sensor bolometers read out with frequency-domain mulitplexing. While this technology has strong heritage in ground-based cosmic microwave background experiments, the broad frequency coverage, low optical loading conditions, and the high cosmic ray background of the space environment require further development of this technology to be suitable for LiteBIRD. In these proceedings, we discuss the optical and bolometeric characterization of a triplexing prototype pixel with bands centered on 78, 100, and 140 GHz.

astro-ph.IM↗

arXiv2022

Report of the Topical Group on Particle Dark Matter for Snowmass 2021

This report summarizes the findings of the CF1 Topical Subgroup to Snowmass 2021, which was focused on particle dark matter. One of the most important scientific goals of the next decade is to reveal the nature of dark matter (DM). To accomplish this goal, we must delve deep, to cover high priority targets including weakly-interacting massive particles (WIMPs), and search wide, to explore as much motivated DM parameter space as possible. A diverse, continuous portfolio of experiments at large, medium, and small scales that includes both direct and indirect detection techniques maximizes the probability of discovering particle DM. Detailed calibrations and modeling of signal and background processes are required to make a convincing discovery. In the event that a candidate particle is found through different means, for example at a particle collider, the program described in this report is also essential to show that it is consistent with the actual cosmological DM. The US has a leading role in both direct and indirect detection dark matter experiments -- to maintain this leading role, it is imperative to continue funding major experiments and support a robust R\&D program.

hep-ph↗

arXiv2022

Development of the characterization methods without electrothermal feedback for TES bolometers for CMB measurements

Superconducting Transition-Edge Sensor (TES) bolometers are used for cosmic microwave background (CMB) observations. We used a testbed to evaluate the thermal performance of TES bolometers in regard to the saturation power Psat and intrinsic thermal time constant tau0. We developed an evaluation method that is complementary to methods with electrothermal feedback. In our method, the antenna termination resistor of the bolometer is directly biased with DC or AC electric power to simulate optical power, and the TES is biased with small power, which allows Psat and tau0 to be determined without contribution from the negative electrothermal feedback. We describe the method and results of the measurement using it. We evaluated Psat of five samples by applying DC power and confirmed the overall trend between Psat and the inverse leg length. We evaluated tau0 of the samples by applying DC plus AC power, and the measured value was reasonable in consideration of the expected values of other TES parameters. This evaluation method enables us to verify whether a TES has been fabricated with the designed values and to provide feedback for fabrication for future CMB observations.

astro-ph.IM↗