arXiv subjects

Arka Santra

Publications and source records attributed to Arka Santra.

7 recordsLinked to original sources

arXiv2026

Initial Performance of the E320 Tracker

Our recent study discussed the prospects for measuring single positrons produced in electron-laser collisions via the nonlinear Breit-Wheeler deep-tunneling process in the SLAC Experiment 320 at the FACET-II RF LINAC. In this work, we demonstrate how a tracking detector, that is a scaled-down version of the one discussed in the prospective simulation study, enables the measurement. This prototype detector, installed in Aug 2024, is built out of five layers of single ALPIDE chips. The data are taken from several standalone runs completed in Nov 2024 and Feb 2025. We use positrons generated through conversion of Bremsstrahlung photons as a proxy to the nonlinear Breit-Wheeler process. These positrons are produced by the beam electrons in a thin Beryllium foil close to the experiment's interaction point. The tracking approach used in this initial work is based on a Hough-Transform seeding algorithm followed by a straight line fit confined to the detector volume. Even with this relatively simple approach, we are able to measure a signal rate of $(1.20\pm0.06_{stat.}\pm0.56_{syst.})\times10^{-1}$ positrons per shot. This signal rate is comparable to the nonlinear Breit-Wheeler rate expected in the main experiment. Notably, the measurement is achieved under an extreme, unprecedented background hit density of ~1.7/mm$^2$, unlike the main experiment, where at least a twice lower density is expected. This large background is mostly due to secondary particles produced when the large flux of Bremsstrahlung photons interacts with the material of the beamline elements. When the foil is retracted, the false-positive signal rate is shown to be four orders of magnitude smaller than the signal rate. We further show that the high spatial tracking resolution of ~5 micron allows to characterize the positrons' spectra. The results are compared to simulations, which are found to be compatible with the data.

hep-ex↗

arXiv2025

Prospects for the production and detection of Breit-Wheeler tunneling positrons in Experiment 320 at the FACET-II accelerator

The SLAC Experiment 320 collides 10 TW-class laser pulses with the high-quality, 10 GeV electron beam from the FACET-II RF LINAC. This setup is expected to produce a sizable number of $e^+e^-$ pairs via nonlinear Breit-Wheeler mechanism in the strong-field tunneling regime, with an estimated yield of ~0.01-0.1 pairs per collision. This small signal rate typically comes along with large backgrounds originating, e.g., from dumping the high-charge primary beam, secondaries induced by the beam halo, as well as photons and low-energy electrons produced in the electron-laser collision itself. These backgrounds may reach densities of O(100) charged particles per cm^2 (and even more neutral particles) at the surface of the sensing elements, making it a tremendous challenge for an unambiguous detection of single particles. In this work, we demonstrate how detectors and methods adapted from high-energy physics experiments, can enable this measurement. The solution presented is based on a highly granular, multi-layer, radiation-hard pixel detector paired with powerful particle-tracking algorithms. Using a detailed simulation of the existing experimental setup, we show how the false-positive rate due to background processes can be reduced by more than an order of magnitude relative to the expected signal after full reconstruction. Furthermore, we show that the high spatial tracking resolution achievable (<10 microns) allows for positron momentum measurements with a resolution of <2%, enabling spectral characterization of the nonlinear Breit-Wheeler process. Based on our extensive simulation, with a conservatively large background assumption, we show that it is possible to measure single Breit-Wheeler positrons in the coming data taking campaign of E320. That would be the first statistically significant observation and characterization of this elusive process in the (deep) tunneling regime.

hep-ex↗

arXiv2023

A derivation of the electric field inside MAPS detectors from beam-test data and limited TCAD simulations

Solid semiconductor sensors are used as detectors in high-energy physics experiments, in medical applications, in space missions and elsewhere. Minimal knowledge of the electric field inside the elementary cells of these sensors is highly important for their performance understanding. The field governs the charge propagation processes and ultimately determines the size and quality of the electronic signal of the cell. Hence, the simulation of these sensors as detectors in different analyses relies strongly on the field knowledge. For a certain voltage applied to the cell, the field depends on the specifics of the device's growth and fabrication. The information about these is often commercially protected or otherwise very difficult to encode in state-of-the-art technology computer-aided-design (TCAD) software. In this work, we show that by taking the top-down approach, combining public beam-test data and a very limited public TCAD knowledge, we are able to effectively approximate the 3D electric field function in the pixel cell of one important and widely used example, namely the ALPIDE sensor, for simulating the charge propagation processes. Despite its broad usage worldwide, the ALPIDE field is not available to the community. We provide an effective field function, that adequately describes the sensor behaviour without trying to reconstruct further details about the device or the details behind its processing. We comment on the process by which the effective field function is derived with the help of the Allpix$^2$ software, and on how similar work can be performed for other devices, starting from the same grounds.

physics.ins-det↗

arXiv2022

Detector Challenges of the strong-field QED experiment LUXE at the European XFEL

The LUXE experiment aims at studying high-field QED in electron-laser and photon-laser interactions, with the 16.5 GeV electron beam of the European XFEL and a laser beam with power of up to 350 TW. The experiment will measure the spectra of electrons, positrons and photons in expected ranges of 10$^{-3}$ to 10$^9$ per 1 Hz bunch crossing, depending on the laser power and focus. These measurements have to be performed in the presence of low-energy high radiation-background. To meet these challenges, for high-rate electron and photon fluxes, the experiment will use Cherenkov radiation detectors, scintillator screens, sapphire sensors as well as lead-glass monitors for backscattering off the beam-dump. A fourlayer silicon-pixel tracker and a compact electromagnetic tungsten calorimeter with GaAs sensors will be used to measure the positron spectra. The layout of the experiment and the expected performance under the harsh radiation conditions will be presented. Beam tests for the Cherenkov detector and the electromagnetic calorimeter were performed at DESY recently and results will be presented. The experiment received a stage 0 critical approvement (CD0) from the DESY management and is in the process of preparing its technical design report (TDR). It is expected to start running in 2025/6.

hep-ex↗

arXiv2021

Probing new physics at the LUXE experiment

The proposed Laser Und XFEL (LUXE) Experiment at DESY, Hamburg, aims to probe QED in the strong field non-perturbative regime. This regime will be created in collisions between high-intensity laser pulses and high-energy electron or photon beams coming from the Eu.XFEL setup. This experiment comes with a unique opportunity to probe physics beyond the standard model. In this proceeding, it is described that with the help of the large photon flux generated at LUXE, axion-like-particles can be probed up to a mass of 350 MeV and with a photon coupling of $3\times10^{-6}$ GeV$^{-1}$. This reach in parameter space is comparable to the projected reach of future experiments like FASER2 in the HL-LHC and NA62 in the dump mode.

hep-ex↗

arXiv2021

LUXE-NPOD: new physics searches with an optical dump at LUXE

We propose a novel way to search for feebly interacting massive particles, exploiting two properties of systems involving collisions between high energy electrons and intense laser pulses. The first property is that the electron-intense-laser collision results in a large flux of hard photons, as the laser behaves effectively as a thick medium. The second property is that the emitted photons free-stream inside the laser and thus for them the laser behaves effectively as a very thin medium. Combining these two features implies that the electron-intense-laser collision is an apparatus which can efficiently convert UV electrons to a large flux of hard, co-linear photons. We further propose to direct this unique large and hard flux of photons onto a physical dump which in turn is capable of producing feebly interacting massive particles, in a region of parameters that has never been probed before. We denote this novel apparatus as ``optical dump'' or NPOD (new physics search with optical dump). The proposed LUXE experiment at Eu.XFEL has all the required basic ingredients of the above experimental concept. We discuss how this concept can be realized in practice by adding a detector after the last physical dump of the experiment to reconstruct the two-photon decay product of a new spin-0 particle. We show that even with a relatively short dump, the search can still be background free. Remarkably, even with a 40 TW laser, which corresponds to the initial run, and definitely with a 350 TW laser, of the main run with one year of data taking, LUXE-NPOD will be able to probe uncharted territory of both models of pseudo-scalar and scalar fields, and in particular probe natural of scalar theories for masses above 100 MeV.

hep-ph↗

arXiv2021

Conceptual Design Report for the LUXE Experiment

This Conceptual Design Report describes LUXE (Laser Und XFEL Experiment), an experimental campaign that aims to combine the high-quality and high-energy electron beam of the European XFEL with a powerful laser to explore the uncharted terrain of quantum electrodynamics characterised by both high energy and high intensity. We will reach this hitherto inaccessible regime of quantum physics by analysing high-energy electron-photon and photon-photon interactions in the extreme environment provided by an intense laser focus. The physics background and its relevance are presented in the science case which in turn leads to, and justifies, the ensuing plan for all aspects of the experiment: Our choice of experimental parameters allows (i) effective field strengths to be probed at and beyond the Schwinger limit and (ii) a precision to be achieved that permits a detailed comparison of the measured data with calculations. In addition, the high photon flux predicted will enable a sensitive search for new physics beyond the Standard Model. The initial phase of the experiment will employ an existing 40 TW laser, whereas the second phase will utilise an upgraded laser power of 350 TW. All expectations regarding the performance of the experimental set-up as well as the expected physics results are based on detailed numerical simulations throughout.

hep-ex↗