SearcharxivSearch

arXiv subjects

Arman Shojaeifard

Publications and source records attributed to Arman Shojaeifard.

At least 19 recordsLinked to original sources

Hybrid TRP-UE Sensing for Enhanced Target Localization

Integrated Sensing and Communication (ISAC) refers to the capability for the network to provide communications services whilst also being able to sense the environment in a scalable manner. One of the key functions of ISAC is the accurate localization of passive and mobile sensing targets. This paper introduces a novel hybrid TRP-UE sensing mechanism that improves network-based sensing performance. Evaluation results are provided using 3GPP-compliant ISAC channel models. The results demonstrate the significant benefit in complimenting TRP-based sensing with UE-assisted sensing in challenging propagation environments such as indoor factory.

eess.SP

Configuration Tuning for ISAC: Cost-Efficient Adaptation via RACE-CMA

This paper studies a feedback driven configuration tuning framework for adaptive sensing feedback in Integrated Sensing and Communication (ISAC) systems. We propose a framework in which the User Equipment (UE) adapts sensing parameters under dynamic conditions while satisfying network defined constraints. The problem is formulated as a stochastic constrained optimization problem, to improve sensing reliability and latency. We consider a bistatic ISAC sensing feedback setup and instantiate the framework via threshold optimization as a representative case study, enabling benchmarking against baseline methods. To ensure efficiency under UE computational limits, we propose Ranking Aware, Constrained, and Efficient CMAES (RACE CMA), which integrates two stage racing, common random numbers, noise aware ranking, and feasible constraint handling. Results show that the proposed approach improves sensing reliability by about 35 percent while reducing computational cost by about 25 percent, yielding roughly a twofold gain in performance cost efficiency. This highlights that UE side configuration tuning is a promising mechanism for enhancing closed loop ISAC performance under practical system constraints.

eess.SP

Multi-Functional RIS-enabled Radar and Communication Coexistence: Channel Modeling and a Sub-6 GHz Indoor Measurement Campaign

In this work, we analyze a multi-functional reconfigurable intelligent surface (MF-RIS)-enabled radar and communication coexistence (RCC) system, detailing the key aspects of its phase synthesis codebook generation and the implemented localization algorithm for real-time user tracking based on density-based spatial clustering of applications with noise (DBSCAN), which features a Kalman filter for the prediction of user mobility. We derived a 3GPP-compatible radar cross-section (RCS) and re-radiation pattern-based channel model for the described MF-RIS system, supplementing it with channel measurements. We obtained large and small-scale characteristics, including path loss, shadow fading, Rician K-factor, cluster powers, and RMS delay spread. The study finds that Sub-6 GHz indoor propagation is largely free of blind spots, even with a blocked line-of-sight (LoS) path. Therefore, the proposed channel model includes non-line-of-sight (NLoS) paths, including the ones created by the MF-RIS. We also performed an experimental evaluation of the channel throughput in a fifth generation (5G) new radio (NR) single user multiple-input-multiple-output (SU-MIMO) system, reporting a 74\% reduction in throughput variance and a 12.5\% sum-rate improvement within the MF-RIS near-field compared to the no-RIS setup. This result shows that the MF-RIS can minimize delay spread and increase the coherence bandwidth by creating virtual-LoS (vLoS) path for the moving user, thereby effectively hardening wireless MIMO channels.

eess.SP

Multi-Functional Programmable Metasurfaces for 6G and Beyond

The sixth-generation and beyond (B6G) networks are envisioned to support advanced applications that demand high-speed communication, high-precision sensing, and high-performance computing. To underpin this multi-functional evolution, energy- and cost-efficient programmable metasurfaces (PMs) have emerged as a promising technology for dynamically manipulating electromagnetic waves. This paper provides a comprehensive survey of representative multi-functional PM paradigms, with a specific focus on achieving \emph{full-space communication coverage}, \emph{ubiquitous sensing}, as well as \emph{intelligent signal processing and computing}. i) For simultaneously transmitting and reflecting surfaces (STARS)-enabled full-space communications, we elaborate on their operational protocols and pivotal applications in supporting efficient communications, physical layer security, unmanned aerial vehicle networks, and wireless power transfer. ii) For PM-underpinned ubiquitous sensing, we formulate the signal models for the PM-assisted architecture and systematically characterize its advantages in near-field and cooperative sensing, while transitioning to the PM-enabled transceiver architecture and demonstrating its superior performance in multi-band operations. iii) For advanced signal processing and computing, we explore the novel paradigm of stacked intelligent metasurfaces (SIMs), investigating their implementation in wave-domain analog processing and over-the-air mathematical computing. Finally, we identify key research challenges and envision future directions for multi-functional PMs towards B6G.

eess.SP

Advanced Closed-Loop Method with Limited Feedback for ISAC

6G wireless networks are poised to seamlessly integrate communication, computing, localization, and sensing functionalities, ensuring high reliability and trustworthiness. This paper introduces Smart Sensing Feedback (SSF), a limited-feedback framework designed to enhance sensing capabilities while maintaining communication performance. SSF adapts the concept of retransmission from communication to sensing. Specifically, we focus on downlink (DL) bistatic sensing, where the User Equipment (UE) performs measurements from reflected sensing signals and provides feedback to the network (NW). In sensing services, UE reporting can vary significantly due to dynamic factors such as target characteristics, environmental conditions, and UE status. Our results demonstrate that SSF significantly improves sensing quality while preserving communication efficiency. Additionally, it enhances key performance metrics such as probability of detection, latency, and power consumption. These improvements underscore SSF's ability to deliver robust, low-overhead feedback and adaptability to support a wide range of ISAC applications.

eess.SP

Towards 6G Evolution: Three Enhancements, Three Innovations, and Three Major Challenges

Over the past few decades, wireless communication has witnessed remarkable growth, experiencing several transformative changes. This article aims to provide a comprehensive overview of wireless communication technologies, from the foundations to the recent wireless advances. Specifically, we take a neutral look at the state-of-the-art technologies for 5G and the ongoing evolutions towards 6G, reviewing the recommendations of the International Mobile Communication vision for 2030 (IMT-2030). We first highlight specific features of IMT 2030, including three IMT-2020 extensions (URLLC+, eMBB+, and mMTC+) and three new innovations (Ubiquitous connectivity and integrating the new capabilities of sensing & AI with communication functionality). Then, we delve into three major challenges in implementing 6G, along with global standardization efforts. Besides, a proof of concept is provided by demonstrating terahertz (THz) signal transmission using Orbital Angular Momentum (OAM) multiplexing, which is one of the potential candidates for 6G and beyond. To inspire further potential research, we conclude by identifying research opportunities and future visions on IMT-2030 recommendations.

cs.IT

ISAC Channel Modelling -- Perspectives from ETSI

Integrated Sensing and Communications (ISAC) is defined as one of six usage scenarios in the ITU-R International Mobile Telecommunications (IMT) 2030 framework for 6G. ISAC is envisioned to introduce the sensing capability into the cellular network, where sensing may be obtained using the cellular radio frequency (RF) signals with or without additional auxiliary sensors. To enable ISAC, specification bodies such as European Telecommunications Standards Institute (ETSI) and Third Generation Partnership Project (3GPP) have already started to look into detailed ISAC use cases, their requirements, and the channel models and evaluation methodologies that are necessary to design and evaluate ISAC performance. With focus on the channel model, the current communication-centric channel models like those specified in 3GPP technical report (TR) 38.901 do not cover the RF signals interactions between the transmitter, target object, receiver and their surrounding environment. To bridge this gap, 3GPP has been looking into the basic changes that are necessary to make to their TR38.901 channel model with focus on selected use cases from the 3GPP SA1 5G-Advanced feasibility study. In parallel, ETSI ISAC Industry Specification Group (ISG) has been studying the more advanced ISAC channel modelling features that are needed to support the variety of ISAC use cases envisioned in 6G. In this paper, we present the baseline and advanced features developed thus far in 3GPP and ETSI ISAC ISG, respectively, towards a comprehensive view of the ISAC channel model in 6G.

eess.SP

Low-Complexity Channel Estimation for RIS-Assisted Multi-User Wireless Communications

Reconfigurable intelligent surfaces (RISs) are eminently suitable for improving the reliability of wireless communications by jointly designing the active beamforming at the base station (BS) and the passive beamforming at the RIS. Therefore, the accuracy of channel estimation is crucial for RIS-aided systems. The challenge is that only the cascaded two-hop channel spanning from the user equipments (UEs) to the RIS and spanning from the RIS to the BS can be estimated, due to the lack of active radio frequency (RF) chains at RIS elements, which leads to high pilot overhead. In this paper, we propose a low-overhead linear minimum mean square error (LMMSE) channel estimation method by exploiting the spatial correlation of channel links, which strikes a trade-off between the pilot overhead and the channel estimation accuracy. Moreover, we calculate the theoretical normalized mean square error (MSE) for our channel estimation method. Finally, we verify numerically that the proposed LMMSE estimator has lower MSE than the state-of-the-art (SoA) grouping based estimators.

cs.IT

Energy-Efficient Reconfigurable Holographic Surfaces Operating in the Presence of Realistic Hardware Impairments

Reconfigurable holographic surfaces (RHSs) constitute a promising technique of supporting energy-efficient communications. In this paper, we formulate the energy efficiency maximization problem of the switch-controlled RHS-aided beamforming architecture by alternately optimizing the holographic beamformer at the RHS, the digital beamformer, the total transmit power and the power sharing ratio of each user. Specifically, to deal with this challenging non-convex optimization problem, we decouple it into three sub-problems. Firstly, the coefficients of RHS elements responsible for the holographic beamformer are optimized to maximize the sum of the eigen-channel gains of all users by our proposed low-complexity eigen-decomposition (ED) method. Then, the digital beamformer is designed by the singular value decomposition (SVD) method to support multi-user information transfer. Finally, the total transmit power and the power sharing ratio are alternately optimized, while considering the effect of transceiver hardware impairments (HWI). We theoretically derive the spectral efficiency and energy efficiency performance upper bound for the RHS-based beamforming architectures in the presence of HWIs. Our simulation results show that the switch-controlled RHS-aided beamforming architecture achieves higher energy efficiency than the conventional fully digital beamformer and the hybrid beamformer based on phase shift arrays (PSA). Moreover, considering the effect of HWI in the beamforming design can bring about further energy efficiency enhancements.

cs.IT

Achievable Rate Analysis of Intelligent Omni-Surface Assisted NOMA Holographic MIMO Systems

An intelligent omni-surface (IOS) assisted holographic multiple-input and multiple-output architecture is conceived for $360^\circ$ full-space coverage at a low energy consumption. The theoretical ergodic rate lower bound of our non-orthogonal multiple access (NOMA) scheme is derived based on the moment matching approximation method, while considering the signal distortion at transceivers imposed by hardware impairments (HWIs). Furthermore, the asymptotically ergodic rate lower bound is derived both for an infinite number of IOS elements and for continuous aperture surfaces. Both the theoretical analysis and the simulation results show that the achievable rate of the NOMA scheme is higher than that of its orthogonal multiple access counterpart. Furthermore, owing to the HWIs at the transceivers, the achievable rate saturates at high signal-to-noise ratio region, instead of reaching its theoretical maximum.

cs.IT

Shaping a Smarter Electromagnetic Landscape: IAB, NCR, and RIS in 5G Standard and Future 6G

The main objective of 5G and beyond networks is to provide an optimal user experience in terms of throughput and reliability, irrespective of location and time. To achieve this, traditional fixed macro base station deployments are being replaced by more innovative and flexible solutions, such as wireless backhaul and relays. This article focuses on the evolution and standardization of these advancements, which are shaping the electromagnetic landscape. Specifically, we explore Integrated Access and Backhaul (IAB) nodes, which offer a cost-efficient and agile alternative to fiber backhaul. We also discuss Network-Controlled Repeaters (NCRs) and the emergence of Reconfigurable Intelligent Surfaces (RIS) actively adapting the wireless environment. The article provides an overview of the 5G features and ongoing developments in 3GPP Release 18 related to these intelligent EM entities, highlighting the expected evolution of future wireless networks in terms of architecture, operations, and control signals.

cs.IT

Achievable Rate Analysis of the STAR-RIS Aided NOMA Uplink in the Face of Imperfect CSI and Hardware Impairments

Reconfigurable intelligent surfaces (RIS) are capable of beneficially ameliorating the propagation environment by appropriately controlling the passive reflecting elements. To extend the coverage area, the concept of simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) has been proposed, yielding supporting 360^circ coverage user equipment (UE) located on both sides of the RIS. In this paper, we theoretically formulate the ergodic sum-rate of the STAR-RIS assisted non-orthogonal multiple access (NOMA) uplink in the face of channel estimation errors and hardware impairments (HWI). Specifically, the STAR-RIS phase shift is configured based on the statistical channel state information (CSI), followed by linear minimum mean square error (LMMSE) channel estimation of the equivalent channel spanning from the UEs to the access point (AP). Afterwards, successive interference cancellation (SIC) is employed at the AP using the estimated instantaneous CSI, and we derive the theoretical ergodic sum-rate upper bound for both perfect and imperfect SIC decoding algorithm. The theoretical analysis and the simulation results show that both the channel estimation and the ergodic sum-rate have performance floor at high transmit power region caused by transceiver hardware impairments.

cs.IT

Performance Analysis of Active RIS-aided Systems in the Face of Imperfect CSI and Phase Shift Noise

The linear minimal mean square error (LMMSE) estimator for active reconfigurable intelligent surface (RIS)-aided wireless systems is formulated. Furthermore, based on the moment-matching method, we employ the Gamma distribution to approximate the distribution of the instantaneous received signal-to-interference-plus-noise ratio (SINR), and then derive the closed-form outage probability and ergodic channel capacity in the presence of realistic channel estimation errors, the thermal noise of RIS amplifiers and the RIS phase shift noise. Our theoretical analysis and simulation results show that the introduction of RIS amplifiers is equivalent to increasing of the transmit power, and also present the performance degradation resulting from the channel estimation error and the RIS phase noise.

cs.IT

Reconfigurable Intelligent Surface Aided Amplitude- and Phase-Modulated Downlink Transmission

New reconfigurable intelligent surface (RIS) based amplitude and phase modulation schemes are proposed as an evolution how the phase-only modulation schemes available in the literature. Explicitly, both the amplitude-phase shift keying (A-PSK) and quadrature amplitude-phase shift keying (QA-PSK) are conceived, where the RIS is assumed to be part of a transmitter to deliver information to the multi-antenna aided downlink receiver. In the proposed design, the RIS is partitioned into multiple blocks, and the information bits are conveyed by controlling both the ON-OFF state and the phase shift of the RIS elements in each block. Since the propagation paths spanning from each RIS block to the receiver can be coherently combined as a benefit of appropriately configuring the phase of the RIS elements, the received signal constellations can be designed by controlling both the ON-OFF pattern of the RIS blocks as well as the phase shift of the RIS elements. Both the theoretical analysis and the simulation results show that our proposed RIS-aided modulation schemes outperform the state-of-the-art RIS-based PSK modulation both in terms of its discrete-input-continuous-output memoryless channel (DCMC) capacity and its symbol error probability, especially in the high signal-to-noise-ratio (SNR) region, when considering realistic finite resolution RIS phase shifts.

cs.IT

RLOps: Development Life-cycle of Reinforcement Learning Aided Open RAN

Radio access network (RAN) technologies continue to evolve, with Open RAN gaining the most recent momentum. In the O-RAN specifications, the RAN intelligent controllers (RICs) are software-defined orchestration and automation functions for the intelligent management of RAN. This article introduces principles for machine learning (ML), in particular, reinforcement learning (RL) applications in the O-RAN stack. Furthermore, we review the state-of-the-art research in wireless networks and cast it onto the RAN framework and the hierarchy of the O-RAN architecture. We provide a taxonomy for the challenges faced by ML/RL models throughout the development life-cycle: from the system specification to production deployment (data acquisition, model design, testing and management, etc.). To address the challenges, we integrate a set of existing MLOps principles with unique characteristics when RL agents are considered. This paper discusses a systematic model development, testing and validation life-cycle, termed: RLOps. We discuss fundamental parts of RLOps, which include: model specification, development, production environment serving, operations monitoring and safety/security. Based on these principles, we propose the best practices for RLOps to achieve an automated and reproducible model development process. At last, a holistic data analytics platform rooted in the O-RAN deployment is designed and implemented, aiming to embrace and fulfil the aforementioned principles and best practices of RLOps.

cs.NI

Statistical CSI-based Beamforming for RIS-Aided Multiuser MISO Systems using Deep Reinforcement Learning

The paper presents a joint beamforming algorithm using statistical channel state information (S-CSI) for reconfigurable intelligent surfaces (RIS) for multiuser MISO wireless communications. We used S-CSI, which is a long-term average of the cascaded channel as opposed to instantaneous CSI utilized in most existing works. Through this method, the overhead of channel estimation is dramatically reduced. We propose a proximal policy optimization (PPO) algorithm which is a well-known actor-critic based reinforcement learning (RL) algorithm to solve the optimization problem. To test the efficacy of this algorithm, simulation results are presented along with evaluations of key system parameters, including the Rician factor and RIS location, on the achievable sum rate of the users.

eess.SP

Sim2real for Reinforcement Learning Driven Next Generation Networks

The next generation of networks will actively embrace artificial intelligence (AI) and machine learning (ML) technologies for automation networks and optimal network operation strategies. The emerging network structure represented by Open RAN (O-RAN) conforms to this trend, and the radio intelligent controller (RIC) at the centre of its specification serves as an ML applications host. Various ML models, especially Reinforcement Learning (RL) models, are regarded as the key to solving RAN-related multi-objective optimization problems. However, it should be recognized that most of the current RL successes are confined to abstract and simplified simulation environments, which may not directly translate to high performance in complex real environments. One of the main reasons is the modelling gap between the simulation and the real environment, which could make the RL agent trained by simulation ill-equipped for the real environment. This issue is termed as the sim2real gap. This article brings to the fore the sim2real challenge within the context of O-RAN. Specifically, it emphasizes the characteristics, and benefits that the digital twins (DT) could have as a place for model development and verification. Several use cases are presented to exemplify and demonstrate failure modes of the simulations trained RL model in real environments. The effectiveness of DT in assisting the development of RL algorithms is discussed. Then the current state of the art learning-based methods commonly used to overcome the sim2real challenge are presented. Finally, the development and deployment concerns for the RL applications realisation in O-RAN are discussed from the view of the potential issues like data interaction, environment bottlenecks, and algorithm design.

cs.LG

Smart Interference Management xApp using Deep Reinforcement Learning

Interference continues to be a key limiting factor in cellular radio access network (RAN) deployments. Effective, data-driven, self-adapting radio resource management (RRM) solutions are essential for tackling interference, and thus achieving the desired performance levels particularly at the cell-edge. In future network architecture, RAN intelligent controller (RIC) running with near-real-time applications, called xApps, is considered as a potential component to enable RRM. In this paper, based on deep reinforcement learning (RL) xApp, a joint sub-band masking and power management is proposed for smart interference management. The sub-band resource masking problem is formulated as a Markov Decision Process (MDP) that can be solved employing deep RL to approximate the policy functions as well as to avoid extremely high computational and storage costs of conventional tabular-based approaches. The developed xApp is scalable in both storage and computation. Simulation results demonstrate advantages of the proposed approach over decentralized baselines in terms of the trade-off between cell-centre and cell-edge user rates, energy efficiency and computational efficiency.

eess.SP