arXiv subjects

Armed Tusha

Publications and source records attributed to Armed Tusha.

5 recordsLinked to original sources

arXiv2026

Evaluation of the effects of 3GPP-specific beamforming and channel estimation on the 3D EIRP profile of a 5G gNB

Spatial domain exploitation through 3D beamforming serves as a critical technology enabler for performance enhancement in the Fifth Generation New Radio (5G NR) specification. This is realized at the gNodeB (gNB) through the integration of massive antenna element arrays that facilitates 3D spatial multiplexing. However, these systems with high-directional transmissions also represent a threat to incumbent services such as radar and satellites. These incumbents already operate in midband spectrum\textemdash{}including the 4.4-4.9 GHz and 7.125-7.4 GHz bands\textemdash{}that are currently being evaluated for future cellular deployments. Here, we present the first work that evaluates the transmitted Effective Isotropic Radiated Power (EIRP) of a gNB in 3D space, using the 3GPP Release-18 standard for FR-1 instead of theoretical analyses of beam nulling, which can be simplistic. We shed light on the problems requiring attention with the EIRP profile in 3D space for existing codebook designs predefined in 3GPP: i) interference from a gNB does not depend only on the worst-case beamforming direction, but on a variety of beamforming directions due to side-lobes; ii) advanced antenna systems (AAS) architecture and antenna port configurations play a crucial role in average 3D EIRP, which are implementation dependent, and iii) we introduce two beam nulling methods, which achieve a 11 dB power reduction toward a target direction, with 3.5-4.5 dB SNR loss in UE link performance at a 10^{-4} bit error rate (BER) across modulation schemes under ideal and practical channel estimation, a higher loss compared to predictions from theoretical analyses.

cs.NI↗

arXiv2025

Evaluation of Indoor/Outdoor Sharing in the Unlicensed 6 GHz Band

Standard Power (SP) Wi-Fi 6E in the U.S. is just beginning to be deployed outdoors in the shared but unlicensed 6 GHz band under the control of an Automated Frequency Coordination (AFC) system to protect incumbents, while low-power-indoor (LPI) usage has been steadily increasing over the past 2 years. In this paper, we present the first comprehensive measurements and analyses of a SP Wi-Fi 6E deployment at the University of Notre Dame's football stadium, with 902 access points and a seating capacity of 80,000, coexisting with LPI deployments in adjacent buildings. Measurement campaigns were conducted during and after games, outdoors and indoors to fully characterize the performance of SP Wi-Fi 6E, interactions between SP and LPI and potential for interference to incumbents. Our main conclusions are: (i) in a very short time of about 2 months, the percentage of Wi-Fi 6E client connections is already 14% indicating rapid adoption, (ii) dense SP operation outdoors can negatively impact LPI deployments indoors, depending on building loss, indicating the need to carefully consider hybrid indoor-outdoor sharing deployments, and (iii) spectrum analyzer results indicate an aggregate signal level increase of approximately 10 dB in a Wi-Fi channel during peak usage which could potentially lead to interference since the AFC does not consider aggregate interference when allocating permitted power levels. These results from real-world deployments can inform spectrum policy in other bands where similar sharing mechanisms are being considered, such as 7.125 - 8.4 GHz.

cs.NI↗

arXiv2024

A Comprehensive Analysis of Secondary Coexistence in a Real-World CBRS Deployment

The Federal Communications Commission (FCC) in the U.S. has made the Citizens Broadband Radio Service (CBRS) band (3.55 - 3.7 GHz) available for commercial wireless usage under a shared approach using a three-tier hierarchical architecture, where the federal incumbent is the highest priority Tier 1 user, Priority Access License (PAL) holders, who have paid for licenses, are Tier 2 users and Tier 3 users operate under General Authorized Access (GAA), without license fees or protection from higher priority users. The Spectrum Access System (SAS) ensures that higher priority users are protected from interference from lower priority users. However, the lowest priority GAA users are not given any protection from each other by the SAS and are expected to not cause any harmful interference to Tier 1 and Tier 2 users. As the deployments of GAA devices grow, the potential for secondary interference between GAA users increases, especially since the SAS architecture does not allow dynamic channel switching when faced with interference. In this paper, we present a first-of-its-kind extensive measurement campaign of a commercial CBRS network deployed in the city of South Bend, IN, that quantifies both co-channel interference (CCI) and adjacent channel interference (ACI) caused by competing GAA devices and C-band 5G, respectively. We (i) identify a particular CCI scenario and improve performance by changing the frequency allocation based on our study of other allocations in the vicinity and (ii) quantify ACI from 5G in C-band (3.7 GHz) on CBRS throughput. We conclude that (i) CCI and ACI for GAA users is not handled well by the SAS, (ii) proper frequency allocation for GAA requires additional analysis of interference from other GAA users followed by dynamical channel selection, and (iii) utilization of immediate adjacent channels by high power 5G deployments limits the performance of CBRS.

cs.NI↗

arXiv2023

Evaluating The Interference Potential in 6 GHz: An Extensive Measurement Campaign of A Dense Indoor Wi-Fi 6E Network

The Federal Communications Commission (FCC) has allocated the 6 GHz band (5.925 - 7.125 GHz) for unlicensed, shared use in the US. Incumbents in the band are protected via Low Power Indoor (LPI) rules that do not require the use of an Automatic Frequency Control (AFC) mechanism and Standard Power (SP) rules which do. As the deployment of Wi-Fi 6E APs implementing LPI rules have been increasing, there is limited research examining the real-world interference potential of dense LPI deployments to fixed links, which remains a concern for incumbents. We have conducted a first-of-its-kind extensive measurement campaign of a dense indoor Wi-Fi 6E network at the University of Michigan, which includes walking, driving, and drone measurements to assess outdoor beacon Received Signal Strength Indicator (RSSI), building entry loss (BEL), channel utilization, and appropriate enabling signal level for a proposed client-to-client (C2C) mode in 6 GHz. Our detailed measurements under various conditions show median outdoor RSSI between -75 dBm and -85 dBm, BEL between 12 dB and 16 dB through double-pane low-emission windows, and only 5% of indoor Basic Service Set Identifiers (BSSIDs) observed outdoors. Our overall conclusion is that the probability of interference to incumbent fixed links is low, but more research is required to determine the appropriate signal level for the C2C enabling signal.

cs.NI↗

arXiv2020

Multidimensional Index Modulation for 5G and Beyond Wireless Networks

This study examines the flexible utilization of existing IM techniques in a comprehensive manner to satisfy the challenging and diverse requirements of 5G and beyond services. After spatial modulation (SM), which transmits information bits through antenna indices, application of IM to orthogonal frequency division multiplexing (OFDM) subcarriers has opened the door for the extension of IM into different dimensions, such as radio frequency (RF) mirrors, time slots, codes, and dispersion matrices. Recent studies have introduced the concept of multidimensional IM by various combinations of one-dimensional IM techniques to provide higher spectral efficiency (SE) and better bit error rate (BER) performance at the expense of higher transmitter (Tx) and receiver (Rx) complexity. Despite the ongoing research on the design of new IM techniques and their implementation challenges, proper use of the available IM techniques to address different requirements of 5G and beyond networks is an open research area in the literature. For this reason, we first provide the dimensional-based categorization of available IM domains and review the existing IM types regarding this categorization. Then, we develop a framework that investigates the efficient utilization of these techniques and establishes a link between the IM schemes and 5G services, namely enhanced mobile broadband (eMBB), massive machine-type communications (mMTC), and ultra-reliable low-latency communication (URLLC). Additionally, this work defines key performance indicators (KPIs) to quantify the advantages and disadvantages of IM techniques in time, frequency, space, and code dimensions. Finally, future recommendations are given regarding the design of flexible IM-based communication systems for 5G and beyond wireless networks.

eess.SP↗