arXiv subjects

Arne Ludwig

Publications and source records attributed to Arne Ludwig.

At least 91 records · Page 5Linked to original sources

arXiv2023

Coherent driving of direct and indirect excitons in a quantum dot molecule

Quantum dot molecules (QDMs) are one of the few quantum light sources that promise deterministic generation of one- and two-dimensional photonic graph states. The proposed protocols rely on coherent excitation of the tunnel-coupled and spatially indirect exciton states. Here, we demonstrate power-dependent Rabi oscillations of direct excitons, spatially indirect excitons, and excitons with a hybridized electron wave function. An off-resonant detection technique based on phonon-mediated state transfer allows for spectrally filtered detection under resonant excitation. Applying a gate voltage to the QDM-device enables a continuous transition between direct and indirect excitons and, thereby, control of the overlap of the electron and hole wave function. This does not only vary the Rabi frequency of the investigated transition by a factor of $\approx3$, but also allows to optimize graph state generation in terms of optical pulse power and reduction of radiative lifetimes.

cond-mat.mes-hall↗

arXiv2023

Collective super- and subradiant dynamics between distant optical quantum emitters

Photon emission is the hallmark of light-matter interaction and the foundation of photonic quantum science, enabling advanced sources for quantum communication and computing. Although single-emitter radiation can be tailored by the photonic environment, the introduction of multiple emitters extends this picture. A fundamental challenge, however, is that the radiative dipole-dipole coupling rapidly decays with spatial separation, typically within a fraction of the optical wavelength. We realize distant dipole-dipole radiative coupling with pairs of solid-state optical quantum emitters embedded in a nanophotonic waveguide. We dynamically probe the collective response and identify both super- and subradiant emission as well as means to control the dynamics by proper excitation techniques. Our work constitutes a foundational step toward multiemitter applications for scalable quantum-information processing.

quant-ph↗

arXiv2022

In-flight detection of few electrons using a singlet-triplet spin qubit

We investigate experimentally the capacitive coupling between a two-electron singlet-triplet spin qubit and flying electrons propagating in quantum Hall edge channels. After calibration of the spin qubit detector, we assess its charge sensibility and demonstrate experimentally the detection of less than five flying electrons with average measurement. This experiment demonstrates that the spin qubit is an ultrasensitive and fast charge detector with the perspective of a future single shot-detection of a single flying electron. This work opens the route toward quantum electron optics experiments at the single electron level in semiconductor circuits.

cond-mat.mes-hall↗

arXiv2022

High-speed thin-film lithium niobate quantum processor driven by a solid-state quantum emitter

Scalable photonic quantum computing architectures pose stringent requirements on photonic processing devices. The need for low-loss high-speed reconfigurable circuits and near-deterministic resource state generators are some of the most challenging requirements. Here we develop an integrated photonic platform based on thin-film lithium niobate and interface it with deterministic solid-state single-photon sources based on quantum dots in nanophotonic waveguides. The generated photons are processed with low-loss circuits programmable at speeds of several GHz. We realize a variety of key photonic quantum information processing functionalities with the high-speed circuits, including on-chip quantum interference, photon demultiplexing, and reprogrammability of a four-mode universal photonic circuit. These results show a promising path forward for scalable photonic quantum technologies by merging integrated photonics with solid-state deterministic photon sources in a heterogeneous approach to scaling up.

quant-ph↗

arXiv2022

Semiconductor membranes for electrostatic exciton trapping in optically addressable quantum transport devices

Combining the capabilities of gate defined quantum transport devices in GaAs-based heterostructures and of optically addressed self-assembled quantum dots could open broad perspectives for new devices and functionalities. For example, interfacing stationary solid-state qubits with photonic quantum states would open a new pathway towards the realization of a quantum network with extended quantum processing capacity in each node. While gated devices allow very flexible confinement of electrons or holes, the confinement of excitons without some element of self-assembly is much harder. To address this limitation, we introduce a technique to realize exciton traps in quantum wells via local electric fields by thinning a heterostructure down to a 220 nm thick membrane. We show that mobilities over $1 \times 10^{6}$ cm$^{2}$V$^{-1}$s$^{-1}$ can be retained and that quantum point contacts and Coulomb oscillations can be observed on this structure, which implies that the thinning does not compromise the heterostructure quality. Furthermore, the local lowering of the exciton energy via the quantum-confined Stark effect is confirmed, thus forming exciton traps. These results lay the technological foundations for devices like single photon sources, spin photon interfaces and eventually quantum network nodes in GaAs quantum wells, realized entirely with a top-down fabrication process.

cond-mat.mes-hall↗

arXiv2022

Cavity-enhanced single-shot readout of a quantum dot spin within 3 nanoseconds

Rapid, high-fidelity single-shot readout of quantum states is a ubiquitous requirement in quantum information technologies, playing a crucial role in quantum computation, quantum error correction, and fundamental tests of non-locality. Readout of the spin state of an optically active emitter can be achieved by driving a spin-preserving optical transition and detecting the emitted photons. The speed and fidelity of this approach is typically limited by a combination of low photon collection rates and measurement back-action. Here, we demonstrate single-shot optical readout of a semiconductor quantum dot spin state, achieving a readout time of only a few nanoseconds. In our approach, gated semiconductor quantum dots are embedded in an open microcavity. The Purcell enhancement generated by the microcavity increases the photon creation rate from one spin state but not from the other, as well as efficiently channelling the photons into a well-defined detection mode. We achieve single-shot readout of an electron spin state in 3 nanoseconds with a fidelity of (95.2$\pm$0.7)%, and observe quantum jumps using repeated single-shot measurements. Owing to the speed of our readout, errors resulting from measurement-induced back-action have minimal impact. Our work reduces the spin readout-time to values well below both the achievable spin relaxation and dephasing times in semiconductor quantum dots, opening up new possibilities for their use in quantum technologies.

quant-ph↗

arXiv2022

Coulomb-mediated antibunching of an electron pair surfing on sound

Electron flying qubits are envisioned as potential information link within a quantum computer, but also promise -- alike photonic approaches -- a self-standing quantum processing unit. In contrast to its photonic counterpart, electron-quantum-optics implementations are subject to Coulomb interaction, which provide a direct route to entangle the orbital or spin degree of freedom. However, the controlled interaction of flying electrons at the single particle level has not yet been established experimentally. Here we report antibunching of a pair of single electrons that is synchronously shuttled through a circuit of coupled quantum rails by means of a surface acoustic wave. The in-flight partitioning process exhibits a reciprocal gating effect which allows us to ascribe the observed repulsion predominantly to Coulomb interaction. Our single-shot experiment marks an important milestone on the route to realise a controlled-phase gate for in-flight quantum manipulations.

cond-mat.mes-hall↗

arXiv2022

Complete readout of two-electron spin states in a double quantum dot

We propose and demonstrate complete spin state readout of a two-electron system in a double quantum dot probed by an electrometer. The protocol is based on repetitive single shot measurements using Pauli spin blockade and our ability to tune on fast timescales the detuning and the interdot tunnel coupling between the GHz and sub-Hz regime. A sequence of three distinct manipulations and measurements allows establishing if the spins are in S, Tzero, Tplus or Tminus state. This work points at a procedure to reduce the overhead for spin readout, an important challenge for scaling up spin qubit platforms.

cond-mat.mes-hall↗

arXiv2022

Structural symmetry-breaking to explain radiative Auger transitions in self-assembled quantum dots

The optical spectrum of a quantum dot is typically dominated by the fundamental transition between the lowest-energy configurations. However, the radiative Auger process can result in additional red-shifted emission lines. The origin of these lines is a combination of Coulomb interaction and symmetry-breaking in the quantum dot. In this paper, we present measurements of such radiative Auger lines for a range of InGaAs/GaAs self-assembled quantum dots and use a tight-binding model with a configuration interaction approach to explain their appearance. Introducing a composition fluctuation cluster in the dot, our calculations show excellent agreement with measurements. We relate our findings to group theory explaining the origin of the additional emission lines. Our model and results give insight into the interplay between the symmetry breaking in a quantum dot and the position and strength of the radiative Auger lines.

cond-mat.mes-hall↗

arXiv2022

Generation of a single-cycle acoustic pulse: a scalable solution for transport in single-electron circuits

The synthesis of single-cycle, compressed optical and microwave pulses sparked novel areas of fundamental research. In the field of acoustics, however, such a generation has not been introduced yet. For numerous applications, the large spatial extent of surface acoustic waves (SAW) causes unwanted perturbations and limits the accuracy of physical manipulations. Particularly, this restriction applies to SAW-driven quantum experiments with single flying electrons, where extra modulation renders the exact position of the transported electron ambiguous and leads to undesired spin mixing. Here, we address this challenge by demonstrating single-shot chirp synthesis of a strongly compressed acoustic pulse. Employing this solitary SAW pulse to transport a single electron between distant quantum dots with an efficiency exceeding 99%, we show that chirp synthesis is competitive with regular transduction approaches. Performing a time-resolved investigation of the SAW-driven sending process, we outline the potential of the chirped SAW pulse to synchronize single-electron transport from many quantum-dot sources. By superimposing multiple pulses, we further point out the capability of chirp synthesis to generate arbitrary acoustic waveforms tailorable to a variety of (opto)nanomechanical applications. Our results shift the paradigm of compressed pulses to the field of acoustic phonons and pave the way for a SAW-driven platform of single-electron transport that is precise, synchronized, and scalable.

cond-mat.mes-hall↗

arXiv2022

Controlled quantum dot array segmentation via a highly tunable interdot tunnel coupling

Recent demonstrations using electron spins stored in quantum dots array as qubits are promising for developing a scalable quantum computing platform. An ongoing effort is therefore aiming at the precise control of the quantum dots parameters in larger and larger arrays which represents a complex challenge. Partitioning of the system with the help of the inter-dot tunnel barriers can lead to a simplification for tuning and offers a protection against unwanted charge displacement. In a triple quantum dot system, we demonstrate a nanosecond control of the inter-dot tunnel rate permitting to reach the two extreme regimes, large GHz tunnel coupling and sub-Hz isolation between adjacent dots. We use this novel development to isolate a sub part of the array while performing charge displacement and readout in the rest of the system. The degree of control over the tunnel coupling achieved in a unit cell should motivate future protocol development for tuning, manipulation and readout including this capability.

cond-mat.mes-hall↗

arXiv2022

Entangling a Hole Spin with a Time-Bin Photon: A Waveguide Approach for Quantum Dot Sources of Multi-Photon Entanglement

Deterministic sources of multi-photon entanglement are highly attractive for quantum information processing but are challenging to realize experimentally. In this paper, we demonstrate a route towards a scaleable source of time-bin encoded Greenberger-Horne-Zeilinger and linear cluster states from a solid-state quantum dot embedded in a nanophotonic crystal waveguide. By utilizing a self-stabilizing double-pass interferometer, we measure a spin-photon Bell state with $(67.8\pm0.4)\%$ fidelity and devise steps for significant further improvements. By employing strict resonant excitation, we demonstrate a photon indistinguishability of $(95.7\pm0.8)\%$, which is conducive to fusion of multiple cluster states for scaling up the technology and producing more general graph states.

quant-ph↗

arXiv2022

Quantum dot molecule devices with optical control of charge status and electronic control of coupling

Tunnel-coupled pairs of optically active quantum dots - quantum dot molecules (QDMs) - offer the possibility to combine excellent optical properties such as strong light-matter coupling with two-spin singlet-triplet ($S-T_0$) qubits having extended coherence times. The $S-T_0$ basis formed using two spins is inherently protected against electric and magnetic field noise. However, since a single gate voltage is typically used to stabilize the charge occupancy of the dots and control the inter-dot orbital couplings, operation of the $S-T_0$ qubits under optimal conditions remains challenging. Here, we present an electric field tunable QDM that can be optically charged with one (1h) or two holes (2h) on demand. We perform a four-phase optical and electric field control sequence that facilitates the sequential preparation of the 2h charge state and subsequently allows flexible control of the inter-dot coupling. Charges are loaded via optical pumping and electron tunnel ionization. We achieve one- and two-hole charging efficiencies of 93.5 $\pm$ 0.8 % and 80.5 $\pm$ 1.3 %, respectively. Combining efficient charge state preparation and precise setting of inter-dot coupling allows control of few-spin qubits, as would be required for on-demand generation of two-dimensional photonic cluster states or quantum transduction between microwaves and photons.

cond-mat.mes-hall↗

arXiv2022

Direct observation of photon bound states using a single artificial atom

The interaction between photons and a single two-level atom constitutes a fundamental paradigm in quantum physics. The nonlinearity provided by the atom means that the light-matter interaction depends strongly on the number of photons interacting with the two-level system within its emission lifetime. This nonlinearity results in the unveiling of strongly correlated quasi-particles known as photon bound states, giving rise to key physical processes such as stimulated emission and soliton propagation. While signatures consistent with the existence of photon bound states have been measured in strongly interacting Rydberg gases, their hallmark excitation-number-dependent dispersion and propagation velocity have not yet been observed. Here, we report the direct observation of a photon-number-dependent time delay in the scattering off a single semiconductor quantum dot coupled to an optical cavity. By scattering a weak coherent pulse off the cavity-QED system and measuring the time-dependent output power and correlation functions, we show that single photons, and two- and three-photon bound states incur different time delays of 144.02\,ps, 66.45\,ps and 45.51\,ps respectively. The reduced time delay of the two-photon bound state is a fingerprint of the celebrated example of stimulated emission, where the arrival of two photons within the lifetime of an emitter causes one photon to stimulate the emission of the other from the atom.

quant-ph↗

arXiv2022

On-demand source of dual-rail photon pairs based on chiral interaction in a nanophotonic waveguide

Entanglement is the fuel of advanced quantum technology. It is for instance consumed in measurement-based quantum computing and allows loss-tolerant encoding of quantum information. In photonics, entanglement has traditionally been generated probabilistically, requiring massive multiplexing for scaling up to many photons. An alternative approach utilizes quantum emitters in nanophotonic devices for deterministic generation of single photons, which an be extended to two- and multi-photon generation on demand. The proposed polarization-entanglement sources are, however, incompatible with spatial dual-rail qubit encoding, which is preferred in photonic quantum computing realized in scalable integrated photonic circuits. Here we propose and experimentally realize an on-demand source of dual-rail photon pairs using a quantum dot in a planar nanophotonic waveguide. The source exploits the cascaded decay of a biexciton state and chiral light-matter coupling to achieve deterministic generation of spatial dual-rail Bell pairs with the amount of entanglement determined by the chirality. The operational principle can readily be extended to multi-photon entanglement generation, and such sources may be interfaced with advanced photonic-integrated circuits, e.g., for efficient preparation of entanglement resource states for photonic quantum computing.

quant-ph↗

arXiv2022

A Pure and indistinguishable single-photon source at telecommunication wavelength

On-demand single-photon sources emitting pure and indistinguishable photons at the telecommunication wavelength are a critical asset towards the deployment of fiber-based quantum networks. Indeed, single photons may serve as flying qubits, allowing communication of quantum information over long distances. Self-assembled InAs quantum dots embedded in GaAs constitute an excellent nearly deterministic source of high quality single photons, but the vast majority of sources operate in the 900-950 nm wavelength range, precluding their adoption in a quantum network. Here, we present a quantum frequency conversion scheme for converting single photons from quantum dots to the telecommunication C band, around 1550 nm, achieving 40.8% end-to-end efficiency, while maintaining both high purity and a high degree of indistinguishability during conversion with measured values of $g^{(2)}(0)=2.4\%$ and $V^{\text{corr}}=94.8\%$, respectively.

quant-ph↗

arXiv2021

Post-processing of real-time quantum event measurements for an optimal bandwidth

Single electron tunneling and its transport statistics have been studied for some time using high precision charge detectors. However, this type of detection requires advanced lithography, optimized material systems and low temperatures (mK). A promising alternative, recently demonstrated, is to exploit an optical transition that is turned on or off when a tunnel event occurs. High bandwidths should be achievable with this approach, although this has not been adequately investigated so far. We have studied low temperature resonance fluorescence from a self-assembled quantum dot embedded in a diode structure. We detect single photons from the dot in real time and evaluate the recorded data only after the experiment, using post-processing to obtain the random telegraph signal of the electron transport. This is a significant difference from commonly used charge detectors and allows us to determine the optimal time resolution for analyzing our data. We show how this post-processing affects both the determination of tunneling rates using waiting-time distributions and statistical analysis using full-counting statistics. We also demonstrate, as an example, that we can analyze our data with bandwidths as high as 350 kHz. Using a simple model, we discuss the limiting factors for achieving the optimal bandwidth and propose how a time resolution of more than 1 MHz could be achieved.

cond-mat.mes-hall↗

arXiv2021

Heat-Driven Electron-Motion in a Nanoscale Electronic Circuit

We study the interaction between two closely spaced but electrically isolated quasi-one-dimensional electrical wires by a drag experiment. In this work we experimentally demonstrate the generation of current in an unbiased (drag) wire, which results from the interactions with a neighboring biased (drive) wire. The direction of the drag current depends on the length of the one-dimensional wire with respect to the position of the barrier in the drag wire. When we additionally form a potential barrier in the drive wire, the direction of the drag current is determined by the relative position of the two barriers. We interpret this behavior in terms of electron excitations by phonon-mediated interactions between the two wires in presence of the electron scattering inside the drive wire.

cond-mat.mes-hall↗