Searcharxiv⌕ Search

arXiv subjects

Arne Sachtler

Publications and source records attributed to Arne Sachtler.

11 recordsLinked to original sources

Fast Non-Parametric Heteroscedastic Imitation Learning With Geometric Priors

When learning probabilistic policies from human demonstrations, data-efficient learning and fast adaptations to new scenarios are key requirements. One popular way to achieve intuitive and reliable adaptations is through non-parametric, typically kernel-based, methods. However, existing solutions either fail to account for the geometry of manifolds common in robotics, limiting data efficiency, or, when geometry-aware, provide unreliable uncertainty estimates or require retraining to adapt. We propose a non-parametric approach leveraging geometric priors in scenarios of data scarcity and heteroscedastic uncertainties for probabilistic modeling. We utilize the method to formulate policies based on time or robot state, where non-separable diagonal kernels allow capturing uncertainty relations between degrees of freedom for same-sized in- and outputs. Fast updates, requiring less than 3 ms for a trajectory involving both position and orientation are possible through an optimized formulation. Our approach supports both manifold-valued input and manifold-valued output with large orientation changes. Using task parameterization, adaptation to different object poses is easily possible. We evaluate the approach on a set of toy examples and on real robot manipulation tasks both in autonomous execution and in shared control scenarios.

cs.RO↗

Natural Swing-Up of an Underpowered Double Pendulum

Robots with weak motors must ride their natural dynamics rather than fight them. We swing up a direct-drive planar two-link robot, whose motors deliver only about 6\,\% of its shoulder gravity torque, along its nonlinear normal modes, two-dimensional invariant manifolds consisting of periodic orbits. On a non-strict mode, injecting energy necessarily moves the state off the manifold, so pumping and stabilization compete for the same bounded torque. We split the input torque into a power-neutral steering component and a scalar pumping input, the only component that changes the energy. The allocation then becomes a linear program in two variables: maximize pumping subject to the torque limits and one control-Lyapunov constraint. The constraint uses the model-based rate of the error, so no stabilizing feedback gain is needed. Experiments in hardware show swing-ups along both modes and compare the allocation with summing-and-clipping and with prioritized stabilization.

cs.RO↗

Exploring Nonlinear Body Oscillations for Natural Quadruped Gaits

Animals' body morphology shapes the gait patterns they can perform, where mechanical resonance reduces the need for active control. By tuning posture and muscle stiffness, they leverage their embodied intelligence to achieve effective gaits for different speeds. In contrast, most quadruped robots are not specifically designed to exploit mechanical resonance due to the complexity of nonlinear dynamics and require dedicated locomotion controllers. To provide an alternative, we present a proof of concept framework making the nonlinear dynamics of a robot predictable in the design process and show how this knowledge can be leveraged such that multi-gait locomotion can emerge from nonlinear resonances, shaped by gravity, inertia, and elasticity. We present the highly compliant quadruped robot eBert, on which we identify six nonlinear normal modes (NNMs) using our new theoretical tools and validate their existence in simulation and hardware. With black-box optimization to determine step length, simulations show how each NNM naturally develops into a distinct gait, manifesting different speeds, which also largely transfers to the robotic hardware. Our experiments show that eBert can exploit its mechanics to generate task-specific movements which may serve as foundation for designing a new generation of agile and efficient robots leveraging embodied intelligence.

cs.RO↗

Strict Modes Everywhere - Bringing Order Into Dynamics of Mechanical Systems by a Potential Compatible With the Geodesic Flow

Strict nonlinear normal modes provide very regular families of oscillations within conservative mechanical systems. However, a strict normal mode will generally be an isolated curve within the configuration space of the system. In this letter, we design a potential that will densely fill the configuration space with strict normal modes such that each configuration belongs to one mode and each mode passes through a common point, the equilibrium. As the potential can be realized by (nonlinear) elastic elements it can be used to execute a variety of periodic trajectories very efficiently. Most of the required torques will come from the elastic elements in the system and not from the actuators. We also design a controller stabilizing the system to a desired target mode and a controller performing swing-up and compensating dissipated energy. Finally, we showcase the approach for a two DoF manipulator. The experiments show that the approach performed well for the example system.

cs.RO↗

Symmetric Lyapunov Subcenter Manifolds for Periodic Regulation of Mechanical Systems

Multi-body mechanical systems have rich internal dynamics, whose solutions can be exploited as energy-efficient control targets. Yet, solutions non-trivially depend on system parameters, obscuring feasible properties for use as target trajectories. For periodic regulation tasks in robotics applications, we investigate properties of nonlinear oscillations collected in Lyapunov subcenter manifolds (LSMs) of conservative mechanical systems (CMs). Using a time-symmetry of CMs, it is shown that mild non-resonance conditions guarantee that LSMs exclusively consist of oscillations between two points of zero velocity. The existence of a unique generator is proven, which is a connected, 1D manifold that collects these points of zero velocity for a given LSM. Furthermore, it is shown that an additional spatial symmetry provides LSMs with yet stronger properties of Rosenberg manifolds. Here all oscillations pass through a unique equilibrium configuration, which can be favorable for control applications. These theoretical results are numerically confirmed on two mechanical systems: a double pendulum and a 5-link pendulum.

math.DS↗

Optimal Control Approach for Non-prehensile Ball Juggling Using a 7-DoF Manipulator

Non-prehensile object manipulation skills are important for real-world robot interactions, enabling highly dynamic tasks such as balancing a glass on a tray or the controlled sliding of items on a table. Among such tasks, those characterised by high-speed manipulation requirements and general sensitivity of the resulting hybrid dynamics are particularly hard to accomplish. Within these, juggling can be seen as a highly challenging maneuver to be solved. The key to robotic juggling is achieving dynamic stabilisation of an underactuated object. Since the object does not possess the ability of self-correction, its stability is entirely dependent on the forces applied to it. This creates a system that is sensitive to control inputs, where timing is critical to continuously counteract deviations and maintain the desired behavior. We develop a systematic method to control a 7-degree-of-freedom manipulator performing non-prehensile ball juggling with a tool. Our primary contribution is a model-based framework for generating juggling trajectories and stabilizing a periodic juggling motion for this hybrid system. The framework incorporates a two-stage optimal control approach to compute the underlying feasible motion patterns required for stable juggling. Offline-computed trajectories are then organised to enable real-time error correction without solving optimal control problems online. We demonstrate the effectiveness of the resulting controller by first evaluating its performance in a simulation environment and performing an experiment using a Franka Emika Panda robot.

cs.RO↗

Locomotion of an Elastic Snake Robot via Natural Dynamics

Nature suggests that exploiting the elasticities and natural dynamics of robotic systems could increase their locomotion efficiency. Prior work on elastic snake robots supports this hypothesis, but has not fully exploited the nonlinear dynamic behavior of the systems. Recent advances in eigenmanifold theory enable a better characterization of the natural dynamics in complex nonlinear systems. This letter investigates if and how the nonlinear natural dynamics of a kinematic elastic snake robot can be used to design efficient gaits. Two types of gaits based on natural dynamics are presented and compared to a state-of-the-art approach using dynamics simulations. The results reveal that a gait generated by switching between two nonlinear normal modes does not improve the locomotion efficiency of the robot. In contrast, gaits based on non-brake periodic trajectories (non-brake orbits) are perfectly efficient in the energy-conservative case. Further simulations with friction reveal that, in a more realistic scenario, non-brake orbit gaits achieve higher efficiency compared to the baseline gait on the rigid system. Overall, the investigation offers promising insights into the design of gaits based on natural dynamics, fostering further research.

cs.RO↗

Swing-Up of a Weakly Actuated Double Pendulum via Nonlinear Normal Modes

We identify the nonlinear normal modes spawning from the stable equilibrium of a double pendulum under gravity, and we establish their connection to homoclinic orbits through the unstable upright position as energy increases. This result is exploited to devise an efficient swing-up strategy for a double pendulum with weak, saturating actuators. Our approach involves stabilizing the system onto periodic orbits associated with the nonlinear modes while gradually injecting energy. Since these modes are autonomous system evolutions, the required control effort for stabilization is minimal. Even with actuator limitations of less than 1% of the maximum gravitational torque, the proposed method accomplishes the swing-up of the double pendulum by allowing sufficient time.

eess.SY↗

Redundancy Resolution at Position Level

Increasing the degrees of freedom of robotic systems makes them more versatile and flexible. This usually renders the system kinematically redundant: the main manipulation or interaction task does not fully determine its joint maneuvers. Additional constraints or objectives are required to solve the under-determined control and planning problems. The state-of-the-art approaches arrange tasks in a hierarchy and decouple lower from higher priority tasks on velocity or torque level using projectors. We develop an approach to redundancy resolution and decoupling on position level by determining subspaces of the configurations space independent of the primary task. We call them \emph{orthogonal foliations} because they are, in a certain sense, orthogonal to the task self-motion manifolds. The approach provides a better insight into the topological properties of robot kinematics and control problems, allowing a global view. A condition for the existence of orthogonal foliations is derived. If the condition is not satisfied, we will still find approximate solutions by numerical optimization. Coordinates can be defined on these orthogonal foliations and can be used as additional task variables for control. We show in simulations that we can control the system without the need for projectors using these coordinates, and we validate the approach experimentally on a 7-DoF robot.

cs.RO↗

What Can Algebraic Topology and Differential Geometry Teach Us About Intrinsic Dynamics and Global Behavior of Robots?

Traditionally, robots are regarded as universal motion generation machines. They are designed mainly by kinematics considerations while the desired dynamics is imposed by strong actuators and high-rate control loops. As an alternative, one can first consider the robot's intrinsic dynamics and optimize it in accordance with the desired tasks. Therefore, one needs to better understand intrinsic, uncontrolled dynamics of robotic systems. In this paper we focus on periodic orbits, as fundamental dynamic properties with many practical applications. Algebraic topology and differential geometry provide some fundamental statements about existence of periodic orbits. As an example, we present periodic orbits of the simplest multi-body system: the double-pendulum in gravity. This simple system already displays a rich variety of periodic orbits. We classify these into three classes: toroidal orbits, disk orbits and nonlinear normal modes. Some of these we found by geometrical insights and some by numerical simulation and sampling.

cs.RO↗

EigenMPC: An Eigenmanifold-Inspired Model-Predictive Control Framework for Exciting Efficient Oscillations in Mechanical Systems

This paper proposes a Nonlinear Model-Predictive Control (NMPC) method capable of finding and converging to energy-efficient regular oscillations, which require no control action to be sustained. The approach builds up on the recently developed Eigenmanifold theory, which defines the sets of line-shaped oscillations of a robot as an invariant two-dimensional submanifold of its state space. By defining the control problem as a nonlinear program (NLP), the controller is able to deal with constraints in the state and control variables and be energy-efficient not only in its final trajectory but also during the convergence phase. An initial implementation of this approach is proposed, analyzed, and tested in simulation.

cs.RO↗