arXiv subjects

Arno Eichberger

Publications and source records attributed to Arno Eichberger.

16 recordsLinked to original sources

arXiv2026

A Comparative Evaluation of Large Vision-Language Models for 2D Object Detection under SOTIF Conditions

Reliable environmental perception remains one of the main obstacles for safe operation of automated vehicles. Safety of the Intended Functionality (SOTIF) concerns safety risks from perception insufficiencies, particularly under adverse conditions where conventional detectors often falter. While Large Vision-Language Models (LVLMs) demonstrate promising semantic reasoning, their quantitative effectiveness for safety-critical 2D object detection is underexplored. This paper presents a systematic evaluation of ten representative LVLMs using the PeSOTIF dataset, a benchmark specifically curated for long-tail traffic scenarios and environmental degradations. Performance is quantitatively compared against two specialized detectors: the anchor-based YOLOv5 and the transformer-based RT-DETRv4. Experimental results reveal a critical trade-off: top-performing LVLMs (e.g., Gemini 3) surpass the YOLOv5 in recall by over 25% and closely match RT-DETRv4 under natural visual degradation, while specialized detectors retain an advantage in geometric precision for handcrafted perturbations. These findings highlight the complementary strengths of semantic reasoning versus geometric regression, supporting the use of LVLMs as high-level safety validators in SOTIF-oriented automated driving systems.

cs.CV↗

arXiv2026

Integrated Graph Search and Model Predictive Control for Smooth and Efficient Path Planning in Autonomous Vehicles

Path planning is a fundamental component of autonomous vehicles, where achieving safe, comfortable, and dynamically feasible paths while ensuring computational efficiency remains a significant challenge. This paper presents a sequential path planning framework in which a rough path obtained from graph search is explicitly exploited to guide a Model Predictive Control (MPC)-based path refinement. A rough path is first obtained via Dijkstra search on a discretized grid and is then used to construct a spatially varying convex lateral safety corridor that explicitly captures obstacle avoidance constraints, transforming discrete obstacle avoidance decisions into continuous feasibility constraints for optimization. Within this corridor, an MPC problem is formulated to refine the path, enabling efficient optimization while maintaining path smoothness by penalizing the third-order spatial derivative of the lateral offset over a prediction horizon. The proposed algorithm is evaluated in multiple overtaking scenarios on both straight and curved roads, including cases with single and multiple target vehicles, using high-fidelity environment simulations (i.e., CarMaker). Compared with the previous study, which used polynomial fitting and a quadratic programming method, the proposed approach consistently achieves lower lateral acceleration, curvature, and jerk while reducing computational cost by 28.08% on straight roads and 29.52% on curved roads. These results demonstrate that exploiting graph-search structure within an MPC formulation provides an effective balance between path smoothness and computational efficiency for autonomous vehicles in structured driving environments.

cs.RO↗

arXiv2026

A Large-Language-Model Supported Personalized Driving Framework for Lane Change in Highway Scenarios

Personalized driving can improve the user acceptance of automated driving systems. However, existing methods still provide limited support for translating natural-language driving preferences, especially when such preferences are expressed implicitly, into executable and distinguishable driving behaviors. This paper proposes a large language model (LLM)-supported personalized driving framework for highway lane-change scenarios. The framework maps natural-language driving commands to executable planning parameters in the open-source Apollo automated driving stack according to three driving styles: aggressive, normal, and conservative. To establish this mapping, candidate planning parameters are evaluated based on the resulting lane-change behaviors, and style-specific parameter sets are constructed through clustering and style-intensity ranking. For command interpretation, a retrieval dataset is constructed to support retrieval-augmented generation (RAG), enabling LLM-based interpretation of implicit user commands. Experimental results show that the derived parameter sets generate distinguishable personalized lane-change behaviors, while RAG consistently improves preference interpretation, particularly for implicit commands. These results indicate the potential of integrating LLM-based natural-language interaction with Apollo to support personalized lane-change behavior generation. The source code and the relevant datasets are available at: https://github.com/ftgTUGraz/LLM-Personalized-Driving.

cs.RO↗

arXiv2026

Lane Change Intention Prediction of two distinct Populations using a Transformer

In complex traffic scenarios, intention prediction of surrounding vehicles can improve the strategy of automated driving functions. Existing work on intention prediction is often trained on datasets of single regions or countries. In this article, a transformer network for lane change intention prediction was trained to predict whether target vehicles perform a left lane change, right lane change or keep their lane. Features inputs used were vehicle positions and distances, each for longitudinal and lateral direction. Before being inputted, these features were converted to Frenet coordinates. Two different datasets from leveLXData collected on highways were used: one from German highways and one from Hong Kong highways. Through cross-dataset evaluation, we show that the accuracy values drop to 71.94%, compared to 85.44% when doing dataset-specific training. When training on both datasets, accuracy levels up to 86.84% were achieved.

cs.LG↗

arXiv2026

Automated Digital Twin Construction for Highway Scenarios Using LiDAR Point Clouds and OpenStreetMap

Accurate road environment modeling is fundamental to the simulation and validation of automated driving systems. However, constructing road maps in standardized formats such as ASAM OpenDRIVE from real-world sensor data remains a time-consuming and costly process. Mobile mapping LiDAR captures accurate lane-level geometry but is confined to the driven corridor, while OpenStreetMap (OSM) provides broad road network topology but lacks geometric precision at the lane level. To address this, an automated workflow is proposed to fuse LiDAR point clouds with OSM data to generate georeferenced ASAM OpenDRIVE maps of highway environments, requiring minimal manual intervention. The pipeline reconstructs mainline roads from LiDAR-derived measurements and infers ramp geometry and topology from the OSM road graph, enabling complete highway interchange modeling without full sensor coverage. Experiments demonstrate a mean lateral RMSE of 0.740 m, and the generated maps are directly usable in mainstream simulation platforms including IPG CarMaker and Esmini. These results validate the effectiveness of combining measurement-derived geometry with map-derived topology for automated OpenDRIVE digital twin generation. The project code is available at https://github.com/ftgTUGraz/opendrive-digital-twin-generator

cs.RO↗

arXiv2026

A Survey on the Applications of Generative Artificial Intelligence in Automated Driving Systems Test Scenario Generation Methods

Ensuring the safety and reliability of Automated Driving Systems (ADS) remains a critical challenge, as traditional verification methods such as large-scale on-road testing are prohibitively costly and time-consuming.To address this,scenario-based testing has emerged as a scalable and efficient alternative,yet existing surveys provide only partial coverage of recent methodological and technological advances.This review systematically analyzes 31 primary studies,and 10 surveys identified through a comprehensive search spanning 2015~2025;however,the in-depth methodological synthesis and comparative evaluation focus primarily on recent frameworks(2023~2025),reflecting the surge of Artificial Intelligent(AI)-assisted and multimodal approaches in this period.Traditional approaches rely on expert knowledge,ontologies,and naturalistic driving or accident data,while recent developments leverage generative models,including large language models,generative adversarial networks,diffusion models,and reinforcement learning frameworks,to synthesize diverse and safety-critical scenarios.Our synthesis identifies three persistent gaps:the absence of standardized evaluation metrics,limited integration of ethical and human factors,and insufficient coverage of multimodal and Operational Design Domain (ODD)-specific scenarios.To address these challenges,this review contributes a refined taxonomy that incorporates multimodal extensions,an ethical and safety checklist for responsible scenario design,and an ODD coverage map with a scenario-difficulty schema to enable transparent benchmarking.Collectively,these contributions provide methodological clarity for researchers and practical guidance for industry,supporting reproducible evaluation and accelerating the safe deployment of higher-level ADS.

cs.SE↗

arXiv2026

A Survey on the Application of Large Language Models in Scenario-Based Testing of Automated Driving Systems

The safety and reliability of Automated Driving Systems (ADSs) must be validated prior to large-scale deployment. Among existing validation approaches, scenario-based testing has been regarded as a promising method to improve testing efficiency and reduce associated costs. Recently, the emergence of Large Language Models (LLMs) has introduced new opportunities to reinforce this approach. While an increasing number of studies have explored the use of LLMs in the field of automated driving, a dedicated review focusing on their application within scenario-based testing remains absent. This survey addresses this gap by systematically categorizing the roles played by LLMs across various phased of scenario-based testing, drawing from both academic research and industrial practice. In addition, key characteristics of LLMs and corresponding usage strategies are comprehensively summarized. The paper concludes by outlining five open challenges and potential research directions. To support ongoing research efforts, a continuously updated repository of recent advancements and relevant open-source tools is made available at: https://github.com/ftgTUGraz/LLM4ADSTest.

cs.SE↗

arXiv2025

A Communication-Latency-Aware Co-Simulation Platform for Safety and Comfort Evaluation of Cloud-Controlled ICVs

Testing cloud-controlled intelligent connected vehicles (ICVs) requires simulation environments that faithfully emulate both vehicle behavior and realistic communication latencies. This paper proposes a latency-aware co-simulation platform integrating CarMaker and Vissim to evaluate safety and comfort under real-world vehicle-to-cloud (V2C) latency conditions. Two communication latency models, derived from empirical 5G measurements in China and Hungary, are incorporated and statistically modeled using Gamma distributions. A proactive conflict module (PCM) is proposed to dynamically control background vehicles and generate safety-critical scenarios. The platform is validated through experiments involving an exemplary system under test (SUT) across six testing conditions combining two PCM modes (enabled/disabled) and three latency conditions (none, China, Hungary). Safety and comfort are assessed using metrics including collision rate, distance headway, post-encroachment time, and the spectral characteristics of longitudinal acceleration. Results show that the PCM effectively increases driving environment criticality, while V2C latency primarily affects ride comfort. These findings confirm the platform's effectiveness in systematically evaluating cloud-controlled ICVs under diverse testing conditions.

cs.RO↗

arXiv2025

Human-Machine Shared Control Approach for the Takeover of CACC

Cooperative Adaptive Cruise Control (CACC) often requires human takeover for tasks such as exiting a freeway. Direct human takeover can pose significant risks, especially given the close-following strategy employed by CACC, which might cause drivers to feel unsafe and execute hard braking, potentially leading to collisions. This research aims to develop a CACC takeover controller that ensures a smooth transition from automated to human control. The proposed CACC takeover maneuver employs an indirect human-machine shared control approach, modeled as a Stackelberg competition where the machine acts as the leader and the human as the follower. The machine guides the human to respond in a manner that aligns with the machine's expectations, aiding in maintaining following stability. Additionally, the human reaction function is integrated into the machine's predictive control system, moving beyond a simple "prediction-planning" pipeline to enhance planning optimality. The controller has been verified to i) enable a smooth takeover maneuver of CACC; ii) ensure string stability in the condition that the platoon has less than 6 CAVs and human control authority is less than 40%; iii) enhance both perceived and actual safety through machine interventions; and iv) reduce the impact on upstream traffic by up to 60%.

cs.RO↗

arXiv2025

Prediction of Lane Change Intentions of Human Drivers using an LSTM, a CNN and a Transformer

Lane changes of preceding vehicles have a great impact on the motion planning of automated vehicles especially in complex traffic situations. Predicting them would benefit the public in terms of safety and efficiency. While many research efforts have been made in this direction, few concentrated on predicting maneuvers within a set time interval compared to predicting at a set prediction time. In addition, there exist a lack of comparisons between different architectures to try to determine the best performing one and to assess how to correctly choose the input for such models. In this paper the structure of an LSTM, a CNN and a Transformer network are described and implemented to predict the intention of human drivers to perform a lane change. We show how the data was prepared starting from a publicly available dataset (highD), which features were used, how the networks were designed and finally we compare the results of the three networks with different configurations of input data. We found that transformer networks performed better than the other networks and was less affected by overfitting. The accuracy of the method spanned from $82.79\%$ to $96.73\%$ for different input configurations and showed overall good performances considering also precision and recall.

cs.LG↗

arXiv2025

Toward a Full-Stack Co-Simulation Platform for Testing of Automated Driving Systems

Virtual testing has emerged as an effective approach to accelerate the deployment of automated driving systems. Nevertheless, existing simulation toolchains encounter difficulties in integrating rapid, automated scenario generation with simulation environments supporting advanced automated driving capabilities. To address this limitation, a full-stack toolchain is presented, enabling automatic scenario generation from real-world datasets and efficient validation through a co-simulation platform based on CarMaker, ROS, and Apollo. The simulation results demonstrate the effectiveness of the proposed toolchain. A demonstration video showcasing the toolchain is available at the provided link: https://youtu.be/taJw_-CmSiY.

cs.RO↗

arXiv2024

Chat2Scenario: Scenario Extraction From Dataset Through Utilization of Large Language Model

The advent of Large Language Models (LLM) provides new insights to validate Automated Driving Systems (ADS). In the herein-introduced work, a novel approach to extracting scenarios from naturalistic driving datasets is presented. A framework called Chat2Scenario is proposed leveraging the advanced Natural Language Processing (NLP) capabilities of LLM to understand and identify different driving scenarios. By inputting descriptive texts of driving conditions and specifying the criticality metric thresholds, the framework efficiently searches for desired scenarios and converts them into ASAM OpenSCENARIO and IPG CarMaker text files. This methodology streamlines the scenario extraction process and enhances efficiency. Simulations are executed to validate the efficiency of the approach. The framework is presented based on a user-friendly web app and is accessible via the following link: https://github.com/ftgTUGraz/Chat2Scenario.

cs.RO↗

arXiv2022

Race Driver Evaluation at a Driving Simulator using a physical Model and a Machine Learning Approach

Professional race drivers are still superior to automated systems at controlling a vehicle at its dynamic limit. Gaining insight into race drivers' vehicle handling process might lead to further development in the areas of automated driving systems. We present a method to study and evaluate race drivers on a driver-in-the-loop simulator by analysing tire grip potential exploitation. Given initial data from a simulator run, two optimiser based on physical models maximise the horizontal vehicle acceleration or the tire forces, respectively. An overall performance score, a vehicle-trajectory score and a handling score are introduced to evaluate drivers. Our method is thereby completely track independent and can be used from one single corner up to a large data set. We apply the proposed method to a motorsport data set containing over 1200 laps from seven professional race drivers and two amateur drivers whose lap times are 10-20% slower. The difference to the professional drivers comes mainly from their inferior handling skills and not their choice of driving line. A downside of the presented method for certain applications is an extensive computation time. Therefore, we propose a Long-short-term memory (LSTM) neural network to estimate the driver evaluation scores. We show that the neural network is accurate and robust with a root-mean-square error between 2-5% and can replace the optimisation based method. The time for processing the data set considered in this work is reduced from 68 hours to 12 seconds, making the neural network suitable for real-time application.

cs.LG↗

arXiv2021

Advanced Lane Detection Model for the Virtual Development of Highly Automated Functions

Virtual development and prototyping has already become an integral part in the field of automated driving systems (ADS). There are plenty of software tools that are used for the virtual development of ADS. One such tool is CarMaker from IPG Automotive, which is widely used in the scientific community and in the automotive industry. It offers a broad spectrum of implementation and modelling possibilities of the vehicle, driver behavior, control, sensors, and environmental models. Focusing on the virtual development of highly automated driving functions on the vehicle guidance level, it is essential to perceive the environment in a realistic manner. For the longitudinal and lateral path guidance line detection sensors are necessary for the determination of the relevant perceiving vehicle and for the planning of trajectories. For this purpose, a lane sensor model was developed in order to efficiently detect lanes in the simulation environment of CarMaker. The so-called advanced lane detection model (ALDM) is optimized regarding the calculation time and is for the lateral and longitudinal vehicle guidance in CarMaker.

cs.RO↗

arXiv2021

Software Framework for Testing of Automated Driving Systems in a Dynamic Traffic Environment

Virtual testing of automated driving systems (ADS) has become an essential part of testing procedures for all automation levels. As ADS from automation level 3 and up are very complex, virtual testing for such systems is inevitable. The complexity of these levels lies in the modelling and calculation demand for the virtual environment which consists of roads, traffic, static and dynamic objects as well as the modelling of the car itself. For safety and performance analyses of ADS, the most important part is the modelling and consideration of road traffic participants. There is multiple traffic flow simulation software (TFSS) which are used to reproduce realistic traffic behavior and are integrated directly or over interfaces with vehicle simulation software (VSS). For these software environments, the possibility to manipulate traffic participants in a defined manner e.g. in the vicinity of the vehicle under test or implementing defined driver models for traffic vehicles is beneficial. In this paper, we present a software framework based on the external driver model interface provided by Vissim. This framework makes it possible to easily manipulate traffic participants for testing purposes of ADS.

cs.SE↗

arXiv2020

Stress Testing Method for Scenario Based Testing of Automated Driving Systems

Classical approaches and procedures for testing of automated vehicles of SAE levels 1 and 2 were based on defined scenarios with specific maneuvers, depending on the function under test. For automated driving systems (ADS) of SAE level 3+, the scenario space is infinite and calling for virtual testing and verification. However, even in simulation, the generation of safety-relevant scenarios for ADS is expensive and time-consuming. This leads to a demand for stochastic and realistic traffic simulation. Therefore, microscopic traffic flow simulation models (TFSM) are becoming a crucial part of scenario-based testing of ADS. In this paper, a co-simulation between the multi-body simulation software IPG CarMaker and the microscopic traffic flow simulation software (TFSS) PTV Vissim is used. Although the TFSS could provide realistic and stochastic behavior of the traffic participants, safety-critical scenarios (SCS) occur rarely. In order to avoid this, a novel Stress Testing Method (STM) is introduced. With this method, traffic participants are manipulated via external driver DLL interface from PTV Vissim in the vicinity of the vehicle under test in order to provoke defined critical maneuvers derived from statistical accident data on highways in Austria. These external driver models imitate human driving errors, resulting in an increase of safety-critical scenarios. As a result, the presented STM method contributes to an increase of safety-relevant scenarios for verification, testing and assessment of ADS.

cs.RO↗