arXiv subjects

Arthur France-Lanord

Publications and source records attributed to Arthur France-Lanord.

10 recordsLinked to original sources

arXiv2026

Pressure-Temperature Phase Diagram and $λ$-Transition in Liquid Sulfur

Using molecular dynamics simulations driven by a machine-learned interatomic potential, we investigate at low to intermediate pressures the $λ$-transition of sulfur, a temperature-induced polymerization. At ambient pressure, we capture the melting of crystalline cyclo-octasulfur into a liquid of molecular rings. Within this liquid, the concentration of non-S$_8$ rings increases with temperature; we show that these molecules act as reactive centers, which eventually trigger polymerization. We reproduce key experimental signatures of the $λ$-transition, including the sharp increase in heat capacity and the pronounced dependence of the transition temperature on the heating rate. Building on this, we reconstruct a phase diagram of polymerization up to intermediate pressures. Our results reveal a moderate decrease of the polymerization temperature with pressure, culminating with its merging with the melting line at a critical point. Beyond this point, we provide direct evidence of polymerization emerging from the crystalline phase. By analyzing temperature-ramp trajectories, we observe the formation of non-S$_8$ rings, open chains, and extended polymeric structures which retain features of the crystalline arrangement; further heating the system leads to disorder taking over through melting. Polymerization is therefore initiated slightly before melting. Altogether, our findings provide a microscopic picture of the $λ$-transition throughout the sulfur phase diagram.

physics.chem-ph↗

arXiv2026

Overcoming sampling limitations using machine-learned interatomic potentials: the case of water-in-salt electrolytes

Machine-learned interatomic potentials hold the promise to enable the modeling of highly concentrated liquids over meaningful timescales, far from reach for current ab initio electronic structure methods. Here we evaluate the performances of various MACE potentials in modeling a $21 m$ water-in-salt electrolyte based on lithium bis(trifluoromethanesulfonyl)imide. We test out-of-the-box foundation models, as well as both fine tuning and from scratch training strategies. Our simulations demonstrate that surrogate models allow to overcome sampling limitations of ab initio molecular dynamics, reaching an excellent agreement with experimental observables such as the structure factor. We also demonstrate the benefit of fine tuning a foundation model over training from scratch: in terms of data efficiency, but most importantly as a means to provide information regarding configurations hard to sample, such as short Li$^+$--Li$^+$ distances. Finally, we show that depending on the reference exchange-correlation functional, empirical dispersion correction schemes can be detrimental. All in all, our work shows that machine-learned interatomic potentials are a good fit for the modeling of highly concentrated electrolytes over long timescales.

physics.chem-ph↗

arXiv2025

Water is a superacid at extreme thermodynamic conditions

The chemical behavior of water under extreme pressures and temperatures lies at the heart of processes shaping planetary interiors, influences the deep carbon cycle, and underpins innovative high-temperature, high-pressure synthesis of materials. Recent experiments reveal that hydrocarbons immersed in ionized water under extreme conditions transform into heavy hydrocarbons and nanodiamonds. However, the chemistry of water at extreme conditions and its role in hydrocarbon condensation remains poorly understood. Here, using ab initio molecular dynamics simulations with enhanced sampling techniques and machine-learning interatomic potentials, we show that increasing pressure at high temperature induces water ionization, creating a superacid-like environment that favors the protonation of hydrocarbons into transient pentacoordinated carbonium ions like CH$_5^+$. These elusive intermediates release molecular hydrogen and yield highly reactive carbocations, driving hydrocarbon chain growth toward nanodiamonds. We demonstrate how the combination of water ionization and pressure-induced methane polarization leads to superacid-driven hydrocarbon chemistry, famously known at far milder conditions. Our findings reveal, for the first time, a superacid aqueous regime and establish the existence of superacid chemistry under extreme conditions. Moreover, they provide a unifying reaction network that explains chemical transformations in environments such as planetary interiors and high pressure, high temperature experiments.

physics.chem-ph↗

arXiv2024

Harvesting nucleating structures in nanoparticle crystallization: The example of gold, silver and iron

The thermodynamics and kinetics of crystallization of nanoparticles, as opposed to bulk phases, may be influenced by surface and size effects. We investigate the importance of such factors in the crystallization process of gold, silver, and iron nanodroplets using numerical simulations in the form of molecular dynamics combined with path sampling. This modeling strategy is targeted at obtaining representative ensembles of structures located at the transition state of the crystallization process. A structural analysis of the transition state ensembles reveals that both the average size and location of the critical nucleation cluster are influenced by surface and nanoscale size effets. Furthermore, we also show that transition state structures in smaller nanodroplets exhibit a more ordered liquid phase, and differentiating between a well-ordered critical cluster and its surrounding disordered liquid phase becomes less evident. All in all, these findings demonstrate that crystallization mechanisms in nanoparticles go beyond the assumptions of classical nucleation theory.

cond-mat.stat-mech↗

arXiv2023

Data-driven path collective variables

Identifying optimal collective variables to model transformations, using atomic-scale simulations, is a long-standing challenge. We propose a new method for the generation, optimization, and comparison of collective variables, which can be thought of as a data-driven generalization of the path collective variable concept. It consists in a kernel ridge regression of the committor probability, which encodes a transformation's progress. The resulting collective variable is one-dimensional, interpretable, and differentiable, making it appropriate for enhanced sampling simulations requiring biasing. We demonstrate the validity of the method on two different applications: a precipitation model, and the association of Li$^+$ and F$^-$ in water. For the former, we show that global descriptors such as the permutation invariant vector allow to reach an accuracy far from the one achieved \textit{via} simpler, more intuitive variables. For the latter, we show that information correlated with the transformation mechanism is contained in the first solvation shell only, and that inertial effects prevent the derivation of optimal collective variables from the atomic positions only.

physics.chem-ph↗

arXiv2022

A cloud platform for automating and sharing analysis of raw simulation data from high throughput polymer molecular dynamics simulations

Open material databases storing hundreds of thousands of material structures and their corresponding properties have become the cornerstone of modern computational materials science. Yet, the raw outputs of the simulations, such as the trajectories from molecular dynamics simulations and charge densities from density functional theory calculations, are generally not shared due to their huge size. In this work, we describe a cloud-based platform to facilitate the sharing of raw data and enable the fast post-processing in the cloud to extract new properties defined by the user. As an initial demonstration, our database currently includes 6286 molecular dynamics trajectories for amorphous polymer electrolytes and 5.7 terabytes of data. We create a public analysis library at https://github.com/TRI-AMDD/htp_md to extract multiple properties from the raw data, using both expert designed functions and machine learning models. The analysis is run automatically with computation in the cloud, and results then populate a database that can be accessed publicly. Our platform encourages users to contribute both new trajectory data and analysis functions via public interfaces. Newly analyzed properties will be incorporated into the database. Finally, we create a front-end user interface at https://www.htpmd.matr.io for browsing and visualization of our data. We envision the platform to be a new way of sharing raw data and new insights for the computational materials science community.

cond-mat.mtrl-sci↗

arXiv2022

Accelerating amorphous polymer electrolyte screening by learning to reduce errors in molecular dynamics simulated properties

Polymer electrolytes are promising candidates for the next generation lithium-ion battery technology. Large scale screening of polymer electrolytes is hindered by the significant cost of molecular dynamics (MD) simulation in amorphous systems: the amorphous structure of polymers requires multiple, repeated sampling to reduce noise and the slow relaxation requires long simulation time for convergence. Here, we accelerate the screening with a multi-task graph neural network that learns from a large amount of noisy, unconverged, short MD data and a small number of converged, long MD data. We achieve accurate predictions of 4 different converged properties and screen a space of 6247 polymers that is orders of magnitude larger than previous computational studies. Further, we extract several design principles for polymer electrolytes and provide an open dataset for the community. Our approach could be applicable to a broad class of material discovery problems that involve the simulation of complex, amorphous materials.

cond-mat.mtrl-sci↗

arXiv2019

Graph Dynamical Networks for Unsupervised Learning of Atomic Scale Dynamics in Materials

Understanding the dynamical processes that govern the performance of functional materials is essential for the design of next generation materials to tackle global energy and environmental challenges. Many of these processes involve the dynamics of individual atoms or small molecules in condensed phases, e.g. lithium ions in electrolytes, water molecules in membranes, molten atoms at interfaces, etc., which are difficult to understand due to the complexity of local environments. In this work, we develop graph dynamical networks, an unsupervised learning approach for understanding atomic scale dynamics in arbitrary phases and environments from molecular dynamics simulations. We show that important dynamical information can be learned for various multi-component amorphous material systems, which is difficult to obtain otherwise. With the large amounts of molecular dynamics data generated everyday in nearly every aspect of materials design, this approach provides a broadly useful, automated tool to understand atomic scale dynamics in material systems.

cond-mat.mtrl-sci↗

arXiv2018

Correlations from ion-pairing and the Nernst-Einstein equation

We present a new approximation to ionic conductivity well suited to dynamical atomic-scale simulations, based on the Nernst-Einstein equation. In our approximation, ionic aggregates constitute the elementary charge carriers, and are considered as non-interacting species. This approach conveniently captures the dominant effect of ion-ion correlations on conductivity, short range interactions in the form of clustering. In addition to providing better estimates to the conductivity at a lower computational cost than exact approaches, this new method allows to understand the physical mechanisms driving ion conduction in concentrated electrolytes. As an example, we consider Li$^+$ conduction in poly(ethylene oxide), a standard solid-state polymer electrolyte. Using our newly developed approach, we are able to reproduce recent experimental results reporting negative cation transference numbers at high salt concentrations, and to confirm that this effect can be caused by a large population of negatively charged clusters involving cations.

physics.chem-ph↗

arXiv2015

Structure, Energy, and Thermal Transport Properties of Si-SiO$_2$ Nanostructures using an Ab initio based Parameterization of a Charge-Optimized Many-Body Forcefield

In an effort to extend the reach of current ab initio calculations to simulations requiring millions of configurations for complex systems such as heterostructures, we have parameterized the third-generation Charge Optimized Many-Body (COMB3) potential using solely ab initio total energies, forces, and stress tensors as input. The quality and the predictive power of the new forcefield is assessed by computing properties including the cohesive energy and density of SiO$_2$ polymorphs, surface energies of alpha-quartz, and phonon densities of states of crystalline and amorphous phases of SiO$_2$. Comparison with data from experiments, ab initio calculations, and molecular dynamics simulations using published forcefields including BKS (van Beest, Kramer, and van Santen), ReaxFF, and COMB2 demonstrate an overall improvement of the new parameterization. The computed temperature dependence of the thermal conductivity of crystalline alpha-quartz and the Kapitza resistance of the interface between crystalline Si(001) and amorphous silica are in excellent agreement with experiment, setting the stage for simulations of complex nanoscale heterostructures.

cond-mat.mtrl-sci↗