arXiv subjects

Artur Glavic

Publications and source records attributed to Artur Glavic.

6 recordsLinked to original sources

arXiv2026

Persistent Uncorrelated Magnetic Domains in Fe/Si Multilayers and their suppression by incorporating 11B4C

This study investigates magnetic domains in Fe/Si and Fe/Si + B4C multilayers using spin flip off-specular polarized neutron reflectometry. The results show that Fe/Si multilayers exhibit pronounced spin flip off-specular scattering originating from magnetic domains that are uncorrelated out of plane. With increasing external magnetic field the domains progressively coalesce and their magnetization rotates toward alignment with the applied field, approaching a homogeneous magnetic state at higher fields. In contrast, Fe/Si + B4C multilayers exhibit no detectable spin flip off-specular scattering already at low fields, indicating that the multilayer reaches magnetic saturation at significantly lower applied fields. The scattering patterns are interpreted using distorted wave Born approximation simulations in BornAgain, enabled by our added code for simulating magnetic domains and magnetic ordering. To further probe the magnetic behavior, low-energy mu+SR measurements were performed, representing the first mu+SR investigation of polarizing neutron optics multilayers. Together with comparison to previously reported VSM data, these measurements provide insight into the magnetic behavior across short range, medium range, and long range length scales. The results show that incorporating approximately 15 vol.% B4C makes the magnetic configuration highly responsive to external magnetic fields, with clear sensitivity to both in-plane and out-of-plane field geometries. These results show that B4C suppresses magnetic domains and spin flip off-specular scattering, improving Fe/Si coatings for neutron polarization optics in regards to off-specular scattering, and other applications requiring easy magnetic manipulation.

cond-mat.mtrl-sci↗

arXiv2025

Optimization of magnetic contrast layer for neutron reflectometry

Neutron reflectivity is a powerful technique for probing density profiles in films, with applications across Physics, Chemistry, and Biology. However, challenges arise when dealing with samples characterized by high roughness, unknown scattering length density (SLD) with low contrast, very thin layers, or complex multi-layered structures, that cannot be uniquely resolved due to the phase problem. Incorporating a magnetic reference layer (MRL) and using polarized neutron reflectivity improves sensitivity and modeling accuracy by providing complementary information. In this study, we introduce a quantitative way to compare MRL systems in a model-free way. We apply this approach to demonstrate that CoTi alloys offer a superior solution as an MRL compared to the commonly used Fe or Ni-based MRLs. The low nuclear and magnetic scattering length densities of CoTi significantly enhance sensitivity, making it particularly advantageous for soft matter research. Furthermore, the tunable Co vs Ti ratio allows for optimization of the SLDs to achieve maximum sensitivity, establishing CoTi as a highly effective choice for MRL applications. The applied simulation framework for optimizing MRL sensitivity to a specific materials system and research question is a generic approach that can be used prior to growing the MRL for a given experiment.

cond-mat.mtrl-sci↗

arXiv2025

Magnetic hysteresis control in thin film Fe/Si multilayers by incorporation of B4C

Magnetic hysteresis properties in Fe/Si multilayers have been studied as a function of the B4C content to control magnetization amplitude, coercivity, and hysteresis tilt, properties that are beneficial to tune for advancing applications in e.g. data storage, spintronics, and sensors. With an ion-assisted magnetron sputtering technique, 35 distinct thin film multilayer samples were prepared and their magnetic and structural properties were characterized by vibrating sample magnetometry, X-ray photoelectron spectroscopy, near edge X-ray absorption fine structure spectroscopy, and X-ray and neutron scattering methods. Key findings indicate that adding B4C lowers the coercivity and can decrease the saturation magnetization, demonstrating the tunability of magnetic responses based on composition. For samples with =30Å periodicity, 10-15% of B4C addition produces antiferromagnetically (AF) coupled multilayers, and such AF coupling strength increases with the B4C content. Our findings reveal that B atoms do not chemically bind within the Fe atoms but instead occupy interstitial positions, disrupting medium- to long-range crystallinity thereby inducing the amorphization. Thereon, the observed effects on magnetic properties are directly attributed to this amorphization process caused by the presence of B4C. The demonstrated ability to finely adjust magnetic properties by varying the B4C content offers a promising approach to overcome challenges in magnetic device performance and efficiency.

cond-mat.mtrl-sci↗

arXiv2025

The Role of 11B4C Interlayers in Enhancing Fe/Si Multilayer Performance for Polarized Neutron Mirrors

This study investigates the effects of incorporating 11B4C interlayers into Fe/Si multilayers, with a focus on interface quality, reflectivity, polarization, and magnetic properties for polarized neutron optics. It is found that the introduction of 1 Å and 2 Å 11B4C interlayers significantly improves the interface sharpness, reducing interface width and preventing excessive Si diffusion into the Fe layers. X-ray reflectivity and polarized neutron reflectivity measurements show enhanced reflectivity and polarization, with a notable increase in polarization for 30 Å period multilayers. The inclusion of interlayers also helps prevent the formation of iron-silicides, improving both the magnetic properties and neutron optical performance. However, the impact of interlayers is less pronounced in thicker-period multilayers (100 Å), primarily due to the ratio between layer and interface widths. These results suggest that 11B4C interlayers offer a promising route for optimizing Fe/Si multilayer performance in polarized neutron mirrors.

cond-mat.mtrl-sci↗

arXiv2025

Diminished spin-flip reflectivity in stacked multilayers with varying period thicknesses of Fe/Si by incorporating 11B4C

This study investigates the effects of 11B4C co-sputtering on the structural and optical properties of Fe/Si stacked multilayers, with a focus on neutron supermirror applications. X-ray and neutron reflectivity techniques reveal that 11B4C incorporation improves interface sharpness, reduces roughness, and enhances reflectivity for all multilayer periods. Neutron reflectivity measurements show reduced spin-flip intensities, while wafer-curvature measurements indicate a 50% reduction in internal stress, allowing for higher mechanical stability of the multilayers. These improvements are attributed to the amorphization of Fe layers, which also suppress the formation of structural and magnetic domains responsible for stress and spin-flip scattering. In contrast, the pure Fe/Si sample exhibits a persistent half-order Bragg peak, indicating residual antiferromagnetic coupling. The results demonstrate that 11B4C enhances neutron optics by reducing spin-flip effects, increasing reflectivity and polarization, and alleviating stress, enabling the use of polarizers at reduced external fields compared to pure Fe/Si multilayers. These findings establish 11B4C as a transformative material for advancing neutron supermirror technology, paving the way for more efficient, stable, and high-performance polarizers in next-generation neutron optics.

cond-mat.mtrl-sci↗

arXiv2017

Efficient polarization analysis for focusing neutron instruments

Polarized neutrons are a powerful probe to investigate magnetism in condensed matter on length scales from single atomic distances to micrometers. With the ongoing advancement of neutron optics, that allow to transport beams with increased divergence, the demands on neutron polarizes and analyzers have grown as well. The situation becomes especially challenging for new instruments at pulsed sources, where a large wavelength band needs to be polarized to make efficient use of the time structure of the beam. Here we present a polarization analysis concept for highly focused neutron beams that is based on transmission supermirrors that are bend in the shape of equiangular spirals. The method allows polarizations above 95\% and good transmission, without negative impact on other beam characteristics. An example of a compact polarizing device already tested on the AMOR reflectometer is presented as well as the concept for the next generation implementation of the technique that will be installed on the Estia instrument being build for the European Spallation Source.

physics.ins-det↗