Searcharxiv⌕ Search

arXiv subjects

Arumugam Nallanathan

Publications and source records attributed to Arumugam Nallanathan.

At least 163 records · Page 9Linked to original sources

Traffic Prediction and Random Access Control Optimization: Learning and Non-learning based Approaches

Random access schemes in modern wireless communications are generally based on the framed-ALOHA (f-ALOHA), which can be optimized by flexibly organizing devices' transmission and re-transmission. However, this optimization is generally intractable due to the lack of information about complex traffic generation statistics and the occurrence of the random collision. In this article, we first summarize the general structure of access control optimization for different random access schemes, and then review the existing access control optimization based on Machine Learning (ML) and non-ML techniques. We demonstrate that the ML-based methods can better optimize the access control problem compared with non-ML based methods, due to their capability in solving high complexity long-term optimization problem and learning experiential knowledge from reality. To further improve the random access performance, we propose two-step learning optimizers for access control optimization, which individually execute the traffic prediction and the access control configuration. In detail, our traffic prediction method relies on online supervised learning adopting Recurrent Neural Networks (RNNs) that can accurately capture traffic statistics over consecutive frames, and the access control configuration can use either a non-ML based controller or a cooperatively trained Deep Reinforcement Learning (DRL) based controller depending on the complexity of different random access schemes. Numerical results show that the proposed two-step cooperative learning optimizer considerably outperforms the conventional Deep Q-Network (DQN) in terms of higher training efficiency and better access performance.

cs.NI↗

Resource Allocation for Secure URLLC in Mission-Critical IoT Scenario

Ultra-reliable low latency communication (URLLC) is one of three primary use cases in the fifth-generation (5G) networks, and its research is still in its infancy due to its stringent and conflicting requirements in terms of extremely high reliability and low latency. To reduce latency, the channel blocklength for packet transmission is finite, which incurs transmission rate degradation and higher decoding error probability. In this case, conventional resource allocation based on Shannon capacity achieved with infinite blocklength codes is not optimal. Security is another critical issue in mission-critical internet of things (IoT) communications, and physical-layer security is a promising technique that can ensure the confidentiality for wireless communications as no additional channel uses are needed for the key exchange as in the conventional upper-layer cryptography method. This paper is the first work to study the resource allocation for a secure mission-critical IoT communication system with URLLC. Specifically, we adopt the security capacity formula under finite blocklength and consider two optimization problems: weighted throughput maximization problem and total transmit power minimization problem. Each optimization problem is non-convex and challenging to solve, and we develop efficient methods to solve each optimization problem. Simulation results confirm the fast convergence speed of our proposed algorithm and demonstrate the performance advantages over the existing benchmark algorithms.

eess.SP↗

Joint Pilot and Payload Power Allocation for Massive-MIMO-enabled URLLC IIoT Networks

The Fourth Industrial Revolution (Industrial 4.0) is coming, and this revolution will fundamentally enhance the way the factories manufacture products. The conventional wired lines connecting central controller to robots or actuators will be replaced by wireless communication networks due to its low cost of maintenance and high deployment flexibility. However, some critical industrial applications require ultra-high reliability and low latency communication (URLLC). In this paper, we advocate the adoption of massive multiple-input multiple output (MIMO) to support the wireless transmission for industrial applications as it can provide deterministic communications similar as wired lines thanks to its channel hardening effects. To reduce the latency, the channel blocklength for packet transmission is finite, and suffers from transmission rate degradation and decoding error probability. Thus, conventional resource allocation for massive MIMO transmission based on Shannon capacity assuming the infinite channel blocklength is no longer optimal. We first derive the closed-form expression of lower bound (LB) of achievable uplink data rate for massive MIMO system with imperfect channel state information (CSI) for both maximum-ratio combining (MRC) and zero-forcing (ZF) receivers. Then, we propose novel low-complexity algorithms to solve the achievable data rate maximization problems by jointly optimizing the pilot and payload transmission power for both MRC and ZF. Simulation results confirm the rapid convergence speed and performance advantage over the existing benchmark algorithms.

eess.SP↗

Throughput Maximization for Full-Duplex UAV Aided Small Cell Wireless Systems

This paper investigates full-duplex unmanned aerial vehicle (UAV) aided small cell wireless systems, where the UAV serving as the base station (BS) is designed to transmit data to the downlink users and receive data from the uplink users simultaneously. To maximize the total system capacity, including uplink and downlink capacity, the UAV trajectory, downlink/uplink user scheduling, and uplink user transmit power are alternately optimized. The resulting optimization problem is mixed-integer and non-convex, which is challenging to solve. To address it, the block coordinate descent method and successive convex approximation techniques are leveraged. Simulation results demonstrate the significant capacity gain can be achieved by our design compared with the other designs.

cs.IT↗

Joint Power and Blocklength Optimization for URLLC in a Factory Automation Scenario

In URLLC, short packet transmission is adopted to reduce latency, such that conventional Shannon's capacity formula is no longer applicable, and the achievable data rate in finite blocklength becomes a complex expression with respect to the decoding error probability and the blocklength. To provide URLLC service in a factory automation scenario, we consider that the central controller transmits different packets to a robot and an actuator, where the actuator is located far from the controller, and the robot can move between the controller and the actuator. In this scenario, we consider four fundamental downlink transmission schemes, including orthogonal multiple access (OMA), non-orthogonal multiple access (NOMA), relay-assisted, and cooperative NOMA (C-NOMA) schemes. For all these transmission schemes, we aim for jointly optimizing the blocklength and power allocation to minimize the decoding error probability of the actuator subject to the reliability requirement of the robot, the total energy constraints, as well as the latency constraints. We further develop low-complexity algorithms to address the optimization problems for each transmission scheme. { For the general case with more than two devices, we also develop a low-complexity efficient algorithm for the OMA scheme.} Our results show that the relay-assisted transmission significantly outperforms the OMA scheme, while NOMA scheme performs well when the blocklength is very limited. We further show that the relay-assisted transmission has superior performance over the C-NOMA scheme due to larger feasible region of the former scheme.

eess.SP↗

Green Deep Reinforcement Learning for Radio Resource Management: Architecture, Algorithm Compression and Challenge

AI heralds a step-change in the performance and capability of wireless networks and other critical infrastructures. However, it may also cause irreversible environmental damage due to their high energy consumption. Here, we address this challenge in the context of 5G and beyond, where there is a complexity explosion in radio resource management (RRM). On the one hand, deep reinforcement learning (DRL) provides a powerful tool for scalable optimization for high dimensional RRM problems in a dynamic environment. On the other hand, DRL algorithms consume a high amount of energy over time and risk compromising progress made in green radio research. This paper reviews and analyzes how to achieve green DRL for RRM via both architecture and algorithm innovations. Architecturally, a cloud based training and distributed decision-making DRL scheme is proposed, where RRM entities can make lightweight deep local decisions whilst assisted by on-cloud training and updating. On the algorithm level, compression approaches are introduced for both deep neural networks and the underlying Markov Decision Processes, enabling accurate low-dimensional representations of challenges. To scale learning across geographic areas, a spatial transfer learning scheme is proposed to further promote the learning efficiency of distributed DRL entities by exploiting the traffic demand correlations. Together, our proposed architecture and algorithms provide a vision for green and on-demand DRL capability.

cs.LG↗

A Unified Spatial Framework for UAV-aided MmWave Networks

For unmanned aerial vehicle (UAV) aided millimeter wave (mmWave) networks, we propose a unified three-dimensional (3D) spatial framework in this paper to model a general case that uncovered users send messages to base stations via UAVs. More specifically, the locations of transceivers in downlink and uplink are modeled through the Poisson point processes and Poisson cluster processes (PCPs), respectively. For PCPs, Matern cluster and Thomas cluster processes, are analyzed. Furthermore, both 3D blockage processes and 3D antenna patterns are introduced for appraising the effect of altitudes. Based on this unified framework, several closed-form expressions for the coverage probability in the uplink and downlink, are derived. By investigating the entire communication process, which includes the two aforementioned phases and the cooperative transmission between them, tractable expressions of system coverage probabilities are derived. Next, three practical applications in UAV networks are provided as case studies of the proposed framework. The results reveal that the impact of thermal noise and non-line-of-sight mmWave transmissions is negligible. In the considered networks, mmWave outperforms sub-6 GHz in terms of the data rate, due to the sharp direction beamforming and large transmit bandwidth. Additionally, there exists an optimal altitude of UAVs, which maximizes the system coverage probability.

cs.IT↗

Stochastic Geometry Modeling of Cellular V2X Communication Over Shared Channels

To overcome the limitations of DSRC with short range, non-supportability of high density networks, unreliable broadcast services, signal congestion and connectivity disruptions, cellular vehicle-to-everything (C-V2X) communication networks, standardized in 3rd Generation Partnership Project (3GPP) Release 14, have been recently introduced to cover broader vehicular communication scenarios including vehicle-to-vehicle (V2V), vehicle-to-pedestrian (V2P) and vehicle-to-infrastructure/network (V2I/N). In C-V2X, vehicles can directly communicate over PC5 based dedicated sidelinks called direct mode or V2V communication. However, high vehicle densities may require reuse of cellular spectrum for V2V. Moreover, infrastructure mode communication through V2I/N links can augment V2V communication by enhancing communication range and reliability for enhanced safety along with consistent performance under traffic congestions. Motivated by the stringent connection reliability, spectral efficiency, and coverage requirements in C-V2X, this paper presents the first comprehensive and tractable analytical framework for performance of C-V2X networks over shared V2V and cellular uplink channels, where the transmitting vehicles can deliver their information via infrastructure or direct mode, based on their distances, propagation environments and the bias factor. By practically modeling the vehicles on the roads using the doubly stochastic Cox process and the base-stations, we derive new association probabilities, new success probabilities of infrastructure and direct mode, and overall success probability of the C-V2X communication over shared channels, which are validated by the simulations results. Our results reveal the benefits of our proposed model (possibility of selecting both direct and infrastructure modes over shared channels) compared to V2V network in terms of success probability.

cs.NI↗

Energy-Efficient Proactive Caching for Fog Computing with Correlated Task Arrivals

With the proliferation of latency-critical applications, fog-radio network (FRAN) has been envisioned as a paradigm shift enabling distributed deployment of cloud-clone facilities at the network edge. In this paper, we consider proactive caching for a one-user one-access point (AP) fog computing system over a finite time horizon, in which consecutive tasks of the same type of application are temporarily correlated. Under the assumption of predicable length of the task-input bits, we formulate a long-term weighted-sum energy minimization problem with three-slot correlation to jointly optimize computation offloading policies and caching decisions subject to stringent per-slot deadline constraints. The formulated problem is hard to solve due to the mixed-integer non-convexity. To tackle this challenge, first, we assume that task-related information are perfectly known {\em a priori}, and provide offline solution leveraging the technique of semi-definite relaxation (SDR), thereby serving as theoretical upper bound. Next, based on the offline solution, we propose a sliding-window based online algorithm under arbitrarily distributed prediction error. Finally, the advantage of computation caching as well the proposed algorithm is verified by numerical examples by comparison with several benchmarks.

cs.IT↗

Ergodic Rate Analysis of Cooperative Ambient Backscatter Communication

Ambient backscatter communication has shown great potential in the development of future wireless networks. It enables a backscatter transmitter (BTx) to send information directly to an adjacent receiver by modulating over ambient radio frequency (RF) carriers. In this paper, we consider a cooperative ambient backscatter communication system where a multi-antenna cooperative receiver separately decodes signals from an RF source and a BTx. Upper bounds of the ergodic rates of both links are derived. The power scaling laws are accordingly characterized for both the primary cellular transmission and the cooperative backscatter. The impact of additional backscatter link is also quantitatively analyzed. Simulation results are provided to verify the derived results.

cs.IT↗

Chemical Reactions-Based Microfluidic Transmitter and Receiver for Molecular Communication

The design of communication systems capable of processing and exchanging information through molecules and chemical processes is a rapidly growing interdisciplinary field, which holds the promise to revolutionize how we realize computing and communication devices. While molecular communication (MC) theory has had major developments in recent years, more practical aspects in designing components capable of MC functionalities remain less explored. Motivated by this, we design a microfluidic MC system with a microfluidic MC transmitter and a microfluidic MC receiver based on chemical reactions. Considering existing MC literature on information transmission via molecular pulse modulation, the proposed microfluidic MC transmitter is capable of generating continuously predefined pulse-shaped molecular concentrations upon rectangular triggering signals using chemical reactions inspired by how cells generate pulse-shaped molecular signals in biology. We further design a microfluidic MC receiver capable of demodulating a received signal to a rectangular output signal using a thresholding reaction and an amplifying reaction. Our chemical reactions-based microfluidic molecular communication system is reproducible and well-designed, and more importantly, it overcomes the slow-speed, unreliability, and non-scalability of biological processes in cells. To reveal design insights, we also derive the theoretical signal responses for our designed microfluidic transmitter and receiver, which further facilitate the transmitter design optimization. Our theoretical results are validated via simulations performed through the COMSOL Multiphysics finite element solver. We demonstrate the predefined nature of the generated pulse and the demodulated rectangular signal together with their dependence on design parameters.

cs.ET↗

Online Supervised Learning for Traffic Load Prediction in Framed-ALOHA Networks

Predicting the current backlog, or traffic load, in framed-ALOHA networks enables the optimization of resource allocation, e.g., of the frame size. However, this prediction is made difficult by the lack of information about the cardinality of collisions and by possibly complex packet generation statistics. Assuming no prior information about the traffic model, apart from a bound on its temporal memory, this paper develops an online learning-based adaptive traffic load prediction method that is based on Recurrent Neural Networks (RNN) and specifically on the Long Short-Term Memory (LSTM) architecture. In order to enable online training in the absence of feedback on the exact cardinality of collisions, the proposed strategy leverages a novel approximate labeling technique that is inspired by Method of Moments (MOM) estimators. Numerical results show that the proposed online predictor considerably outperforms conventional methods and is able to adapt to changing traffic statistics.

cs.NI↗

Achievable Data Rate for URLLC-Enabled UAV Systems with 3-D Channel Model

In this paper, we investigate the average achievable data rate (AADR) of the control information delivery from the ground control station (GCS) to unmanned-aerial-vehicle (UAV) under a 3-D channel, which requires ultra-reliable and low-latency communications (URLLC) to avoid collision. The value of AADR can give insights on the packet size design. Achievable data rate under short channel blocklength is adopted to characterize the system performance. The UAV is assumed to be uniformly distributed within a restricted space. We first adopt the Gaussian-Chebyshev quadrature (GCQ) to approximate the exact AADR. The tight lower bound of AADR is derived in a closed form. Numerical results verify the correctness and tightness of our derived results.

eess.SP↗

Secure Communications in a Unified Non-Orthogonal Multiple Access Framework

This paper investigates the impact of physical layer secrecy on the performance of a unified non-orthogonal multiple access (NOMA) framework, where both external and internal eavesdropping scenarios are examined. The spatial locations of legitimate users (LUs) and eavesdroppers are modeled by invoking stochastic geometry. To characterize the security performance, new exact and asymptotic expressions of secrecy outage probability (SOP) are derived for both code-domain NOMA (CD-NOMA) and power-domain NOMA (PD-NOMA), in which imperfect successive interference cancellation (ipSIC) and perfect SIC (pSIC) are taken into account. For the external eavesdropping scenario, the secrecy diversity orders by a pair of LUs (the n-th user and m-th user) for CD/PD-NOMA are obtained. Analytical results make known that the diversity orders of the $n$-th user with ipSIC/pSIC for CD-NOMA and PD-NOMA are equal to zero/K and zero/one, respectively. The diversity orders of the m-th user are equal to K/one for CD/PD-NOMA. For the internal eavesdropping scenario, we examine the analysis of secrecy diversity order and observe that the m-th user to wiretap the n-th user with ipSIC/pSIC for CD-NOMA and PD-NOMA provide the diversity orders of zero/K and zero/one, respectively, which is consistent with external eavesdropping scenario. Numerical results are present to confirm the accuracy of the analytical results developed and show that: i) The secrecy outage behavior of the $n$-th user is superior to that of the m-th user; ii) By increasing the number of subcarriers, CD-NOMA is capable of achieving a larger secrecy diversity gain compared to PD-NOMA.

cs.IT↗

Joint Task Assignment and Resource Allocation for D2D-Enabled Mobile-Edge Computing

With the proliferation of computation-extensive and latency-critical applications in the 5G and beyond networks, mobile-edge computing (MEC) or fog computing, which provides cloud-like computation and/or storage capabilities at the network edge, is envisioned to reduce computation latency as well as to conserve energy for wireless devices (WDs). This paper studies a novel device-to-device (D2D)-enabled multi-helper MEC system, in which a local user solicits its nearby WDs serving as helpers for cooperative computation. We assume a time division multiple access (TDMA) transmission protocol, under which the local user offloads the tasks to multiple helpers and downloads the results from them over orthogonal pre-scheduled time slots. Under this setup, we minimize the computation latency by optimizing the local user's task assignment jointly with the time and rate for task offloading and results downloading, as well as the computation frequency for task execution, subject to individual energy and computation capacity constraints at the local user and the helpers. However, the formulated problem is a mixed-integer non-linear program (MINLP) that is difficult to solve. To tackle this challenge, we propose an efficient algorithm by first relaxing the original problem into a convex one, and then constructing a suboptimal task assignment solution based on the obtained optimal one. Next, we consider a benchmark scheme that endows the WDs with their maximum computation capacities. To further reduce the implementation complexity, we also develop a heuristic scheme based on the greedy task assignment. Finally, numerical results validate the effectiveness of our proposed algorithm, as compared against the heuristic scheme and other benchmark ones without either joint optimization of radio and computation resources or task assignment design.

cs.IT↗

Clustered Millimeter Wave Networks with Non-Orthogonal Multiple Access

We introduce clustered millimeter wave networks with invoking non-orthogonal multiple access~(NOMA) techniques, where the NOMA users are modeled as Poisson cluster processes and each cluster contains a base station (BS) located at the center. To provide realistic directional beamforming, an actual antenna array pattern is deployed at all BSs. We propose three distance-dependent user selection strategies to appraise the path loss impact on the performance of our considered networks. With the aid of such strategies, we derive tractable analytical expressions for the coverage probability and system throughput. Specifically, closed-form expressions are deduced under a sparse network assumption to improve the calculation efficiency. It theoretically demonstrates that the large antenna scale benefits the near user, while such influence for the far user is fluctuant due to the randomness of the beamforming. Moreover, the numerical results illustrate that: 1) the proposed system outperforms traditional orthogonal multiple access techniques and the commonly considered NOMA-mmWave scenarios with the random beamforming; 2) the coverage probability has a negative correlation with the variance of intra-cluster receivers; 3) 73 GHz is the best carrier frequency for near user and 28 GHz is the best choice for far user; 4) an optimal number of the antenna elements exists for maximizing the system throughput.

cs.IT↗

Modeling and Analysis of Two-Way Relay Non-Orthogonal Multiple Access Systems

A two-way relay non-orthogonal multiple access (TWR-NOMA) system is investigated, where two groups of NOMA users exchange messages with the aid of one half-duplex (HD) decode-and-forward (DF) relay. Since the signal-plus-interference-to-noise ratios (SINRs) of NOMA signals mainly depend on effective successive interference cancellation (SIC) schemes, imperfect SIC (ipSIC) and perfect SIC (pSIC) are taken into account. In order to characterize the performance of TWR-NOMA systems, we first derive closed-form expressions for both exact and asymptotic outage probabilities of NOMA users' signals with ipSIC/pSIC. Based on the derived results, the diversity order and throughput of the system are examined. Then we study the ergodic rates of users' signals by providing the asymptotic analysis in high SNR regimes. Lastly, numerical simulations are provided to verify the analytical results and show that: 1) TWR-NOMA is superior to TWR-OMA in terms of outage probability in low SNR regimes; 2) Due to the impact of interference signal (IS) at the relay, error floors and throughput ceilings exist in outage probabilities and ergodic rates for TWR-NOMA, respectively; and 3) In delay-limited transmission mode, TWR-NOMA with ipSIC and pSIC have almost the same energy efficiency. However, in delay-tolerant transmission mode, TWR-NOMA with pSIC is capable of achieving larger energy efficiency compared to TWR-NOMA with ipSIC.

cs.IT↗

Joint Blocklength and Location Optimization for URLLC-enabled UAV Relay Systems

This letter considers the unmanned aerial vehicle (UAV)-enabled relay system to deliver command information under ultra-reliable and low-latency communication (URLLC) requirements. We aim to jointly optimize the blocklength allocation and the UAV's location to minimize the decoding error probability subject to the latency requirement. The achievable data rate under finite blocklength regime is adopted. A novel perturbation-based iterative algorithm is proposed to solve this problem. Simulation results show that the proposed algorithm can achieve the same performance as the exhaustive search method, and significantly outperforms the existing algorithms.

eess.SP↗