arXiv subjects

Arupjyoti Bhuyan

Publications and source records attributed to Arupjyoti Bhuyan.

28 records · Page 2Linked to original sources

arXiv2020

Lifetime Maximization for UAV-assisted Data Gathering Networks in the Presence of Jamming

Deployment of unmanned aerial vehicles (UAVs) is recently getting significant attention due to a variety of practical use cases, such as surveillance, data gathering, and commodity delivery. Since UAVs are powered by batteries, energy efficient communication is of paramount importance. In this paper, we investigate the problem of lifetime maximization of a UAV-assisted network in the presence of multiple sources of interference, where the UAVs are deployed to collect data from a set of wireless sensors. We demonstrate that the placement of the UAVs play a key role in prolonging the lifetime of the network since the required transmission powers of the UAVs are closely related to their locations in space. In the proposed scenario, the UAVs transmit the gathered data to a primary UAV called \textit{leader}, which is in charge of forwarding the data to the base station (BS) via a backhaul UAV network. We deploy tools from spectral graph theory to tackle the problem due to its high non-convexity. Simulation results demonstrate that our proposed method can significantly improve the lifetime of the UAV network.

eess.SP↗

arXiv2020

Precoder Design for mmWave UAV Communications with Physical Layer Security

The integration of unmanned aerial vehicles (UAVs) into the terrestrial cellular networks is envisioned as one key technology for next-generation wireless communications. In this work, we consider the physical layer security of the communications links in the millimeter-wave (mmWave) spectrum which are maintained by UAVs functioning as base stations (BS). In particular, we propose a new precoding strategy which incorporates the channel state information (CSI) of the eavesdropper (Eve) compromising link security. We show that our proposed precoder strategy eliminates any need for artificial noise (AN) transmission in underloaded scenarios (fewer users than number of antennas). In addition, we demonstrate that our nonlinear precoding scheme provides promising secrecy-rate performance even for overloaded scenarios at the expense of transmitting low-power AN.

eess.SP↗

arXiv2020

Interference Analysis and Mitigation for Massive Access Aerial IoT Considering 3D Antenna Patterns

Due to dense deployments of Internet of things (IoT) networks, interference management becomes a critical challenge. With the proliferation of aerial IoT devices, such as unmanned aerial vehicles (UAVs), interference characteristics in 3D environments will be different than those in the existing terrestrial IoT networks. In this paper, we consider 3D topology IoT networks with a mixture of aerial and terrestrial links, with low-cost cross-dipole antennas at ground nodes and omni-directional antennas at aerial nodes. Considering a massive-access communication scenario, we first derive the statistics of the channel gain at IoT receivers in closed form while taking into account the radiation patterns of both ground and aerial nodes. These are then used to calculate the ergodic achievable rate as a function of the height of the aerial receiver. We propose an interference mitigation scheme that utilizes 3D antenna radiation pattern with different dipole antenna settings. Our results show that using the proposed scheme, the ergodic achievable rate improves as the height of aerial receivers increases. In addition, the ratio between the ground and aerial receivers that maximizes the peak rate also increases with the aerial IoT receiver height.

eess.SP↗

arXiv2019

Dynamic Interference Management for UAV-Assisted Wireless Networks

The deployment of unmanned aerial vehicles (UAVs) is proliferating as they are effective, flexible and cost-efficient devices for a variety of applications ranging from natural disaster recovery to delivery of goods. We investigate a transmission mechanism aiming to improve the data rate between a base station (BS) and a user equipment through deploying multiple relaying UAVs. We consider the effect of interference, which is incurred by the nodes of another established communication network. Our primary goal is to design the 3D trajectories and power allocation for the UAVs to maximize the data flow while the interference constraint is met. The UAVs can reconfigure their locations to evade the unintended/intended interference caused by reckless/smart interferers. We also consider the scenario in which smart jammers chase the UAVs to degrade the communication quality. In this case, we investigate the problem from the perspective of both UAV network and smart jammers. An alternating-maximization approach is proposed to address the joint 3D trajectory design and power allocation problem. We handle the 3D trajectory design by resorting to spectral graph theory and subsequently address the power allocation through convex optimization techniques. Finally, we demonstrate the efficacy of our proposed method through simulations.

eess.SP↗

arXiv2019

Hybrid Precoding for mmWave Massive MIMO with One-Bit DAC

Hybrid beamforming is key to achieving energy-efficient 5G wireless networks equipped with massive amount of antennas. Low-resolution data converters bring yet another degree of freedom to energy efficiency for the state-of-the-art 5G transceivers. In this work, we consider the design of hybrid precoders for massive multiple-input multiple-output (MIMO) channels in millimeter-wave (mmWave) spectrum along with one-bit digital-to-analog converters (DACs) and finite-quantized phase shifters. In particular, we propose an alternating-optimization-based precoder design which recursively computes the covariance of the quantization distortion, and updates the precoders accordingly. Numerical results verify that the achievable rate improves quickly through iterations that involve updates to the weight matrix, distortion covariance of the quantization, and the respective precoders.

eess.SP↗

arXiv2019

Interference Mitigation Scheme in 3D Topology IoT Network with Antenna Radiation Pattern

Internet of things (IoT) is one of main paradigms for 5G wireless systems. Due to high connection density, interference from other sources is a key problem in IoT networks. Especially, it is more difficult to find a solution to manage interference in uncoordinated networks than coordinated system. In this work, we consider 3D topology of uncoordinated IoT network and propose interference mitigation scheme with respect to 3D antenna radiation pattern. In 2D topology network, the radiation pattern of dipole antenna can be assumed as onmi-directional. We show the variance of antenna gain on dipole antenna in 3D topology, consider the simultaneous use of three orthogonal dipole antennas, and compare the system performance depending on different antenna configurations. Our simulation results show that proper altitude of IoT devices can extensively improve the system performance.

eess.SP↗

arXiv2019

Interference Avoidance in UAV-Assisted Networks: Joint 3D Trajectory Design and Power Allocation

The use of the unmanned aerial vehicle (UAV) has been foreseen as a promising technology for the next generation communication networks. Since there are no regulations for UAVs deployment yet, most likely they form a network in coexistence with an already existed network. In this work, we consider a transmission mechanism that aims to improve the data rate between a terrestrial base station (BS) and user equipment (UE) through deploying multiple UAVs relaying the desired data flow. Considering the coexistence of this network with other established communication networks, we take into account the effect of interference, which is incurred by the existing nodes. Our primary goal is to optimize the three-dimensional (3D) trajectories and power allocation for the relaying UAVs to maximize the data flow while keeping the interference to existing nodes below a predefined threshold. An alternating-maximization strategy is proposed to solve the joint 3D trajectory design and power allocation for the relaying UAVs. To this end, we handle the information exchange within the network by resorting to spectral graph theory and subsequently address the power allocation through convex optimization techniques. Simulation results show that our approach can considerably improve the information flow while the interference threshold constraint is met.

cs.NI↗

arXiv2019

SLNR Based Precoding for One-Bit Quantized Massive MIMO in mmWave Communications

Massive multiple-input multiple-output (MIMO) is a key technology for 5G wireless communications with a promise of significant capacity increase. The use of low-resolution data converters is crucial for massive MIMO to make the overall transmission as cost- and energy-efficient as possible. In this work, we consider a downlink millimeter-wave (mmWave) transmission scenario, where multiple users are served simultaneously by massive MIMO with one-bit digital-to-analog (D/A) converters. In particular, we propose a novel precoder design based on signal-to-leakage-plus-noise ratio (SLNR), which minimizes energy leakage into undesired users while taking into account impairments due to nonlinear one-bit quantization. We show that well-known regularized zero-forcing (RZF) precoder is a particular version of the proposed SLNR-based precoder, which is obtained when quantization impairments are totally ignored. Numerical results underscore significant performance improvements along with the proposed SLNR-based precoder as compared to either RZF or zero-forcing (ZF) precoders.

cs.IT↗

arXiv2019

Physical Layer Identification based on Spatial-temporal Beam Features for Millimeter Wave Wireless Networks

With millimeter wave (mmWave) wireless communication envisioned to be the key enabler of next generation high data rate wireless networks, security is of paramount importance. While conventional security measures in wireless networks operate at a higher layer of the protocol stack, physical layer security utilizes unique device dependent hardware features to identify and authenticate legitimate devices. In this work, we identify that the manufacturing tolerances in the antenna arrays used in mmWave devices contribute to a beam pattern that is unique to each device, and to that end we propose a novel device fingerprinting scheme based on the unique beam patterns used by the mmWave devices. Specifically, we propose a fingerprinting scheme with multiple access points (APs) to take advantage of the rich spatial-temporal information of the beam pattern. We perform comprehensive experiments with commercial off-the-shelf mmWave devices to validate the reliability performance of our proposed method under various scenarios. We also compare our beam pattern feature with a conventional physical layer feature namely power spectral density feature (PSD). To that end, we implement PSD feature based fingerprinting for mmWave devices. We show that the proposed multiple APs scheme is able to achieve over 99% identification accuracy for stationary LOS and NLOS scenarios and significantly outperform the PSD based method. For mobility scenarios, the overall identification accuracy is 96%. In addition, we perform security analysis of our proposed beam pattern fingerprinting system and PSD fingerprinting system by studying the feasibility of performing impersonation attacks. We design and implement an impersonation attack mechanism for mmWave wireless networks using state-of-the-art 60 GHz software defined radios. We discuss our findings and their implications on the security of the mmWave wireless networks.

cs.CR↗

arXiv2018

Enhancing Physical Layer Security for NOMA Transmission in mmWave Drone Networks

Physical layer security (PLS) is critically important for emerging wireless communication networks to maintain the confidentiality of the information of legitimate users. In this paper, we investigate enhancing PLS in an unmanned aerial vehicle (UAV) based communication network where a UAV acting as an aerial base station (BS) provides coverage in a densely packed user area (such as a stadium or a concert area). In particular, non-orthogonal multiple access (NOMA) together with highly-directional multi-antenna transmission techniques in mmWave frequency bands are utilized for improving spectral efficiency. In order to achieve PLS against potential eavesdropper attacks, we introduce a protected zone around the user region. However, limited resource availability refrain protected zone being extended to cover the entire eavesdropper region. Hence, we propose an approach to optimize the protected zone shape (for fixed area) at each UAV-BS hovering altitude. The associated secrecy performance is evaluated considering the secrecy outage and sum secrecy rates. Numerical results reveal the importance of protected zone shape optimization at each altitude to maximize NOMA secrecy rates.

cs.IT↗