arXiv subjects

Ashish D. Deshpande

Publications and source records attributed to Ashish D. Deshpande.

8 recordsLinked to original sources

arXiv2026

A Bilateral Teleoperation Framework for Dexterous Manipulation

Dexterous teleoperation requires precise arm-hand coordination, low-latency feedback, and robust interaction in real-world contact-rich environments. This paper presents a modular bilateral teleoperation framework that integrates operator-side input interfaces with a robot-side dexterous hand and compliant robotic arm in a unified control architecture. The system supports position-based hand retargeting, differential arm control, multi-scale haptic feedback, and shared control for stable manipulation. We validate the framework through a real-world dexterous manipulation task, highlighting coordinated arm-hand control and contact-aware interaction. Beyond feasibility, we identify key design insights related to cross-embodiment mismatch, haptic feedback granularity, and shared control. The proposed platform provides a practical teleoperation system and a foundation for collecting high-quality demonstrations for future learning-from-demonstration research.

cs.RO↗

arXiv2026

Characterizing the onset and offset of motor imagery during passive arm movements induced by an upper-body exoskeleton

Two distinct technologies have gained attention lately due to their prospects for motor rehabilitation: robotics and brain-machine interfaces (BMIs). Harnessing their combined efforts is a largely uncharted and promising direction that has immense clinical potential. However, a significant challenge is whether motor intentions from the user can be accurately detected using non-invasive BMIs in the presence of instrumental noise and passive movements induced by the rehabilitation exoskeleton. As an alternative to the straightforward continuous control approach, this study instead aims to characterize the onset and offset of motor imagery during passive arm movements induced by an upper-body exoskeleton to allow for the natural control (initiation and termination) of functional movements. Ten participants were recruited to perform kinesthetic motor imagery (MI) of the right arm while attached to the robot, simultaneously cued with LEDs indicating the initiation and termination of a goal-oriented reaching task. Using electroencephalogram signals, we built a decoder to detect the transition between i) rest and beginning MI and ii) maintaining and ending MI. Offline decoder evaluation achieved group average onset accuracy of 60.7% and 66.6% for offset accuracy, revealing that the start and stop of MI could be identified while attached to the robot. Furthermore, pseudo-online evaluation could replicate this performance, forecasting reliable online exoskeleton control in the future. Our approach showed that participants could produce quality and reliable sensorimotor rhythms regardless of noise or passive arm movements induced by wearing the exoskeleton, which opens new possibilities for BMI control of assistive devices.

cs.RO↗

arXiv2026

Real-Time Decoding of Movement Onset and Offset for Brain-Controlled Rehabilitation Exoskeleton

Robot-assisted therapy can deliver high-dose, task-specific training after neurologic injury, but most systems act primarily at the limb level-engaging the impaired neural circuits only indirectly-which remains a key barrier to truly contingent, neuroplasticity-targeted rehabilitation. We address this gap by implementing online, dual-state motor imagery control of an upper-limb exoskeleton, enabling goal-directed reaches to be both initiated and terminated directly from non-invasive EEG. Eight participants used EEG to initiate assistance and then volitionally halt the robot mid-trajectory. Across two online sessions, group-mean hit rates were 61.5% for onset and 64.5% for offset, demonstrating reliable start-stop command delivery despite instrumental noise and passive arm motion. Methodologically, we reveal a systematic, class-driven bias induced by common task-based recentering using an asymmetric margin diagnostic, and we introduce a class-agnostic fixation-based recentering method that tracks drift without sampling command classes while preserving class geometry. This substantially improves threshold-free separability (AUC gains: onset +56%, p = 0.0117; offset +34%, p = 0.0251) and reduces bias within and across days. Together, these results help bridge offline decoding and practical, intention-driven start-stop control of a rehabilitation exoskeleton, enabling precisely timed, contingent assistance aligned with neuroplasticity goals while supporting future clinical translation.

cs.RO↗

arXiv2026

Human-Exoskeleton Kinematic Calibration to Improve Hand Tracking for Dexterous Teleoperation

Hand exoskeletons are critical tools for dexterous teleoperation and immersive manipulation interfaces, but achieving accurate hand tracking remains a challenge due to user-specific anatomical variability and donning inconsistencies. These issues lead to kinematic misalignments that degrade tracking performance and limit applicability in precision tasks. We propose a subject-specific calibration framework for exoskeleton-based hand tracking that estimates virtual link parameters through residual-weighted optimization. A data-driven approach is introduced to empirically tune cost function weights using motion capture ground truth, enabling accurate and consistent calibration across users. Implemented on the Maestro hand exoskeleton with seven healthy participants, the method achieved substantial reductions in joint and fingertip tracking errors across diverse hand geometries. Qualitative visualizations using a Unity-based virtual hand further demonstrate improved motion fidelity. The proposed framework generalizes to exoskeletons with closed-loop kinematics and minimal sensing, laying the foundation for high-fidelity teleoperation and robot learning applications.

cs.RO↗

arXiv2025

A novel parameter estimation method for pneumatic soft hand control applying logarithmic decrement for pseudo rigid body modeling

The rapid advancement in physical human-robot interaction (HRI) has accelerated the development of soft robot designs and controllers. Controlling soft robots, especially soft hand grasping, is challenging due to their continuous deformation, motivating the use of reduced model-based controllers for real-time dynamic performance. Most existing models, however, suffer from computational inefficiency and complex parameter identification, limiting their real-time applicability. To address this, we propose a paradigm coupling Pseudo-Rigid Body Modeling with the Logarithmic Decrement Method for parameter estimation (PRBM plus LDM). Using a soft robotic hand test bed, we validate PRBM plus LDM for predicting position and force output from pressure input and benchmark its performance. We then implement PRBM plus LDM as the basis for closed-loop position and force controllers. Compared to a simple PID controller, the PRBM plus LDM position controller achieves lower error (average maximum error across all fingers: 4.37 degrees versus 20.38 degrees). For force control, PRBM plus LDM outperforms constant pressure grasping in pinching tasks on delicate objects: potato chip 86 versus 82.5, screwdriver 74.42 versus 70, brass coin 64.75 versus 35. These results demonstrate PRBM plus LDM as a computationally efficient and accurate modeling technique for soft actuators, enabling stable and flexible grasping with precise force regulation.

cs.RO↗

arXiv2025

BiFlex: A Passive Bimodal Stiffness Flexible Wrist for Manipulation in Unstructured Environments

Robotic manipulation in unstructured, humancentric environments poses a dual challenge: achieving the precision need for delicate free-space operation while ensuring safety during unexpected contact events. Traditional wrists struggle to balance these demands, often relying on complex control schemes or complicated mechanical designs to mitigate potential damage from force overload. In response, we present BiFlex, a flexible robotic wrist that uses a soft buckling honeycomb structure to provides a natural bimodal stiffness response. The higher stiffness mode enables precise household object manipulation, while the lower stiffness mode provides the compliance needed to adapt to external forces. We design BiFlex to maintain a fingertip deflection of less than 1 cm while supporting loads up to 500g and create a BiFlex wrist for many grippers, including Panda, Robotiq, and BaRiFlex. We validate BiFlex under several real-world experimental evaluations, including surface wiping, precise pick-and-place, and grasping under environmental constraints. We demonstrate that BiFlex simplifies control while maintaining precise object manipulation and enhanced safety in real-world applications.

cs.RO↗

arXiv2023

BaRiFlex: A Robotic Gripper with Versatility and Collision Robustness for Robot Learning

We present a new approach to robot hand design specifically suited for successfully implementing robot learning methods to accomplish tasks in daily human environments. We introduce BaRiFlex, an innovative gripper design that alleviates the issues caused by unexpected contact and collisions during robot learning, offering robustness, grasping versatility, task versatility, and simplicity to the learning processes. This achievement is enabled by the incorporation of low-inertia actuators, providing high Back-drivability, and the strategic combination of Rigid and Flexible materials which enhances versatility and the gripper's resilience against unpredicted collisions. Furthermore, the integration of flexible Fin-Ray linkages and rigid linkages allows the gripper to execute compliant grasping and precise pinching. We conducted rigorous performance tests to characterize the novel gripper's compliance, durability, grasping and task versatility, and precision. We also integrated the BaRiFlex with a 7 Degree of Freedom (DoF) Franka Emika's Panda robotic arm to evaluate its capacity to support a trial-and-error (reinforcement learning) training procedure. The results of our experimental study are then compared to those obtained using the original rigid Franka Hand and a reference Fin-Ray soft gripper, demonstrating the superior capabilities and advantages of our developed gripper system.

cs.RO↗

arXiv2021

SCAPE: Learning Stiffness Control from Augmented Position Control Experiences

We introduce a sample-efficient method for learning state-dependent stiffness control policies for dexterous manipulation. The ability to control stiffness facilitates safe and reliable manipulation by providing compliance and robustness to uncertainties. Most current reinforcement learning approaches to achieve robotic manipulation have exclusively focused on position control, often due to the difficulty of learning high-dimensional stiffness control policies. This difficulty can be partially mitigated via policy guidance such as imitation learning. However, expert stiffness control demonstrations are often expensive or infeasible to record. Therefore, we present an approach to learn Stiffness Control from Augmented Position control Experiences (SCAPE) that bypasses this difficulty by transforming position control demonstrations into approximate, suboptimal stiffness control demonstrations. Then, the suboptimality of the augmented demonstrations is addressed by using complementary techniques that help the agent safely learn from both the demonstrations and reinforcement learning. By using simulation tools and experiments on a robotic testbed, we show that the proposed approach efficiently learns safe manipulation policies and outperforms learned position control policies and several other baseline learning algorithms.

cs.RO↗