arXiv subjects

Ashkan Kalantari

Publications and source records attributed to Ashkan Kalantari.

11 recordsLinked to original sources

arXiv2018

$M$-QAM Precoder Design for MIMO Directional Modulation Transceivers

Spectrally efficient multi-antenna wireless communication systems are a key challenge as service demands continue to increase. At the same time, powering up radio access networks is facing environmental and regulation limitations. In order to achieve more power efficiency, we design a directional modulation precoder by considering an $M$-QAM constellation, particularly with $M=4,8,16,32$. First, extended detection regions are defined for desired constellations using analytical geometry. Then, constellation points are placed in the optimal positions of these regions while the minimum Euclidean distance to adjacent constellation points and detection region boundaries is kept as in the conventional $M$-QAM modulation. For further power efficiency and symbol error rate similar to that of fixed design in high SNR, relaxed detection regions are modeled for inner points of $M=16,32$ constellations. The modeled extended and relaxed detection regions as well as the modulation characteristics are utilized to formulate symbol-level precoder design problems for directional modulation to minimize the transmission power while preserving the minimum required SNR at the destination. In addition, the extended and relaxed detection regions are used for precoder design to minimize the output of each power amplifier. We transform the design problems into convex ones and devise an interior point path-following iterative algorithm to solve the mentioned problems and provide details on finding the initial values of the parameters and the starting point. Results show that compared to the benchmark schemes, the proposed method performs better in terms of power and peak power reduction as well as symbol error rate reduction for a wide range of SNRs.

cs.IT↗

arXiv2017

Low Complexity Symbol-Level Design for Linear Precoding Systems

The practical utilization of the symbol-level precoding in MIMO systems is challenging since the implementation of the sophisticated optimization algorithms must be done with reasonable computational resources. In the real implementation of MIMO precoding systems, the processing time for each set of symbols is a crucial parameter, especially in the high-throughput mode. In this work, a symbol-level optimization algorithm with reduced complexity is devised. Performance of a symbol-level precoder is shown to improve in terms of the processing times per set of symbols.

eess.SP↗

arXiv2017

Symbol-level and Multicast Precoding for Multiuser Multiantenna Downlink: A Survey, Classification and Challenges

Precoding has been conventionally considered as an effective means of mitigating the interference and efficiently exploiting the available in the multiantenna downlink channel, where multiple users are simultaneously served with independent information over the same channel resources. The early works in this area were focused on transmitting an individual information stream to each user by constructing weighted linear combinations of symbol blocks (codewords). However, more recent works have moved beyond this traditional view by: i) transmitting distinct data streams to groups of users and ii) applying precoding on a symbol-per-symbol basis. In this context, the current survey presents a unified view and classification of precoding techniques with respect to two main axes: i) the switching rate of the precoding weights, leading to the classes of block- and symbol-level precoding, ii) the number of users that each stream is addressed to, hence unicast-/multicast-/broadcast- precoding. Furthermore, the classified techniques are compared through representative numerical results to demonstrate their relative performance and uncover fundamental insights. Finally, a list of open theoretical problems and practical challenges are presented to inspire further research in this area.

cs.IT↗

arXiv2017

Robust Cooperative Relay Beamforming

In this paper, the robust distributed relay beamforming problem is solved using the worst case approach, where the problem solution has been involved because of the effect of uncertainty of channel knowledge on the quality of service (QoS) constraints. It is shown that the original robust design, which is a non-convex semi-infinite problem (SIP), can be relaxed and reformed to a semi-definite problem (SDP). Monte-Carlo simulations are presented to verify the performance improvement of our proposed robust problem over existing robust and non-robust problems in terms of transmit power and symbol error probability.

cs.IT↗

arXiv2016

Frequency of Arrival-based Interference Localization Using a Single Satellite

Intentional and unintentional interferences are an increasing threat for the satellite communications industry. In this paper, we aim to localize an interference with unknown location using frequency of arrival (FoA) technique by only relying on the measurements obtained through a single satellite. In each time instance, the satellite samples the interference and forwards it to the gateway to estimate its frequency. Since the satellite moves, each estimated frequency includes a Doppler shift, which is related to the location of the unknown interferer. The satellite's position, velocity, oscillator frequency, and the interference frequency are used at the gateway to build a location-related equation between the estimated frequency and the location of the unknown interference. Simultaneously with the interference signal, the satellite samples a reference signal to calibrate the estimated frequency and compensate for the mismatches between the available and real values of the satellite's position, velocity, and oscillator frequency. Multiple location-related equations obtained based on the FoA measurements, (at least two), along with the equation of the earth surface are used to localize the unknown interference. Simulations show that increasing the number of these equations, and the satellite velocity can improve the localization accuracy by 80% and 95%, respectively.

cs.IT↗

arXiv2016

Directional Modulation via Symbol-Level Precoding: A Way to Enhance Security

Wireless communication provides a wide coverage at the cost of exposing information to unintended users. As an information-theoretic paradigm, secrecy rate derives bounds for secure transmission when the channel to the eavesdropper is known. However, such bounds are shown to be restrictive in practice and may require exploitation of specialized coding schemes. In this paper, we employ the concept of directional modulation and follow a signal processing approach to enhance the security of multi-user MIMO communication systems when a multi-antenna eavesdropper is present. Enhancing the security is accomplished by increasing the symbol error rate at the eavesdropper. Unlike the information-theoretic secrecy rate paradigm, we assume that the legitimate transmitter is not aware of its channel to the eavesdropper, which is a more realistic assumption. We examine the applicability of MIMO receiving algorithms at the eavesdropper. Using the channel knowledge and the intended symbols for the users, we design security enhancing symbol-level precoders for different transmitter and eavesdropper antenna configurations. We transform each design problem to a linearly constrained quadratic program and propose two solutions, namely the iterative algorithm and one based on non-negative least squares, at each scenario for a computationally-efficient modulation. Simulation results verify the analysis and show that the designed precoders outperform the benchmark scheme in terms of both power efficiency and security enhancement.

cs.IT↗

arXiv2016

Secrecy Analysis on Network Coding in Bidirectional Multibeam Satellite Communications

Network coding is an efficient means to improve the spectrum efficiency of satellite communications. However, its resilience to eavesdropping attacks is not well understood. This paper studies the confidentiality issue in a bidirectional satellite network consisting of two mobile users who want to exchange message via a multibeam satellite using the XOR network coding protocol. We aim to maximize the sum secrecy rate by designing the optimal beamforming vector along with optimizing the return and forward link time allocation. The problem is non-convex, and we find its optimal solution using semidefinite programming together with a 1-D search. For comparison, we also solve the sum secrecy rate maximization problem for a conventional reference scheme without using network coding. Simulation results using realistic system parameters demonstrate that the bidirectional scheme using network coding provides considerably higher secrecy rate compared to that of the conventional scheme.

cs.IT↗

arXiv2016

Joint Power Control in Wiretap Interference Channels

Interference in wireless networks degrades the signal quality at the terminals. However, it can potentially enhance the secrecy rate. This paper investigates the secrecy rate in a two-user interference network where one of the users, namely user 1, requires to establish a confidential connection. User 1 wants to prevent an unintended user of the network to decode its transmission. User 1 has to transmit such that its secrecy rate is maximized while the quality of service at the destination of the other user, user 2, is satisfied, and both user's power limits are taken into account. We consider two scenarios: 1) user 2 changes its power in favor of user 1, an altruistic scenario, 2) user 2 is selfish and only aims to maintain the minimum quality of service at its destination, an egoistic scenario. It is shown that there is a threshold for user 2's transmission power that only below or above which, depending on the channel qualities, user 1 can achieve a positive secrecy rate. Closed-form solutions are obtained in order to perform joint optimal power control. Further, a new metric called secrecy energy efficiency is introduced. We show that in general, the secrecy energy efficiency of user 1 in an interference channel scenario is higher than that of an interference-free channel.

cs.IT↗

arXiv2016

Secure M-PSK Communication via Directional Modulation

In this work, a directional modulation-based technique is devised to enhance the security of a multi-antenna wireless communication system employing M-PSK modulation to convey information. The directional modulation method operates by steering the array beam in such a way that the phase of the received signal at the receiver matches that of the intended M-PSK symbol. Due to the difference between the channels of the legitimate receiver and the eavesdropper, the signals received by the eavesdropper generally encompass a phase component different than the actual symbols. As a result, the transceiver which employs directional modulation can impose a high symbol error rate on the eavesdropper without requiring to know the eavesdropper's channel. The optimal directional modulation beamformer is designed to minimize the consumed power subject to satisfying a specific resulting phase and minimal signal amplitude at each antenna of the legitimate receiver. The simulation results show that the directional modulation results in a much higher symbol error rate at the eavesdropper compared to the conventional benchmark scheme, i.e., zero-forcing precoding at the transmitter.

cs.IT↗

arXiv2015

Performance Analysis of Opportunistic Relaying Over Imperfect Non-identical Log-normal Fading Channels

Motivated by the fact that full diversity order is achieved using the "best-relay" selection technique, we consider opportunistic amplify-and-forward and decode-and-forward relaying systems. We focus on the outage probability of such a systems and then derive closed-form expressions for the outage probability of these systems over independent but non-identical imperfect Log-normal fading channels. We consider the error of channel estimation as a Gaussian random variable. As a result the estimated channels distribution are not Log-normal either as would be in the case of the Rayleigh fading channels. This is exactly the reason why our simulation results do not exactly matched with analytical results. However, this difference is negligible for a wide variety of situations.

cs.IT↗

arXiv2015

Secrecy Energy Efficiency Optimization for MISO and SISO Communication Networks

Energy-efficiency, high data rates and secure communications are essential requirements of the future wireless networks. In this paper, optimizing the secrecy energy efficiency is considered. The optimal beamformer is designed for a MISO system with and without considering the minimum required secrecy rate. Further, the optimal power control in a SISO system is carried out using an efficient iterative method, and this is followed by analyzing the trade-off between the secrecy energy efficiency and the secrecy rate for both MISO and SISO systems.

cs.IT↗