arXiv subjects

Ashutosh Goswami

Publications and source records attributed to Ashutosh Goswami.

8 recordsLinked to original sources

arXiv2026

Fault-tolerant interfaces for quantum LDPC codes

The preparation of a quantum state using a noisy quantum computer (gate noise strength $δ$), will necessarily affect an O($δ$)-fraction of the qubits, no matter which protocol is used. Here, we show that fault-tolerant quantum state preparation can be achieved with constant space overhead improving on previous constructions requiring polylogarithmic overhead. To achieve this, we add to the toolbox of fault-tolerant schemes for circuits with quantum input and output. More specifically, we construct fault-tolerant interfaces that decrease the level of protection for quantum low-density parity-check (LDPC) codes. When information is encoded in multiple code blocks, our interfaces have constant space overhead. In our decoder construction that change the level of protection by an arbitrary amount, we circumvent bottlenecks to error pileup and overhead by gradual lowering of the level of encoding at the same time as we increase the number of blocks on which decoding is carried out simultaneously.

quant-ph↗

arXiv2025

Fault-tolerant quantum input/output

Usual scenarios of fault-tolerant computation are concerned with the fault-tolerant realization of quantum algorithms that compute classical functions, such as Shor's algorithm for factoring. In particular, this means that input and output to the quantum algorithm are classical. In contrast to stand-alone single-core quantum computers, in many distributed scenarios, quantum information might have to be passed on from one quantum information processing system to another one, possibly via noisy quantum communication channels with noise levels above fault-tolerant thresholds. In such situations, quantum information processing devices will have quantum inputs, quantum outputs or even both, which pass qubits among each other. Working in the fault-tolerant framework of [Kitaev, 1997], we show that any quantum circuit with quantum input and output can be transformed into a fault-tolerant circuit that produces the ideal circuit with some controlled noise applied at the input and output. The framework allows the direct composition of the statements, enabling versatile future applications. We illustrate this with a concrete application, namely, communication over a noisy channel with faulty encoding and decoding operations [Christandl and M{ü}ller-Hermes, 2024]. For communication codes with linear minimum distance, we construct fault-tolerant encoders and decoders for general noise (including coherent errors). For the weaker, but standard, model of local stochastic noise, we obtain fault-tolerant encoders and decoders for any communication code that can correct a constant fraction random errors.

quant-ph↗

arXiv2025

Fault-tolerant quantum computation with constant overhead for general noise

Fault-tolerant quantum computation traditionally incurs substantial resource overhead, with both qubit and time overheads scaling polylogarithmically with the size of the computation. While prior work by Gottesman showed that constant qubit overhead is achievable under stochastic noise using quantum low-density parity-check (QLDPC) codes, it has remained an open question whether similar guarantees hold under more general, non-stochastic noise models. In this work, we address this question by considering a general circuit-level noise model defined via the diamond norm, which captures both stochastic and non-stochastic noise, including coherent and amplitude damping noise. We prove that constant qubit overhead fault-tolerant quantum computation is achievable in this general setting, using QLDPC codes with constant rate and linear minimum distance. To establish our result, we develop a fault-tolerant error correction scheme and a method for implementing logic gates under general circuit noise. These results extend the theoretical foundations of fault-tolerant quantum computation and offer new directions for fault-tolerant architectures under realistic noise models.

quant-ph↗

arXiv2024

Factory-based Fault-tolerant Preparation of Quantum Polar Codes Encoding One logical Qubit

A fault-tolerant way to prepare logical code-states of Q1 codes, i.e., quantum polar codes encoding one qubit, has been recently proposed. The fault tolerance therein is guaranteed by an error detection gadget, where if an error is detected during the preparation, one discards entirely the preparation. Due to error detection, the preparation is probabilistic, and its success rate, referred to as the preparation rate, decreases rapidly with the code-length, preventing the preparation of code-states of large code-lengths. In this paper, to improve the preparation rate, we consider a factory preparation of Q1 code-states, where one attempts to prepare several copies of Q1 code-states in parallel. Using an extra scheduling step, we can avoid discarding the preparation entirely, every time an error is detected, hence, achieving an increased preparation rate in turn. We further provide a theoretical method to estimate preparation and logical error rates of Q1 codes, prepared using factory preparation, which is shown to tightly fit the Monte-Carlo simulation based numerical results. Therefore, our theoretical method is useful for providing estimates for large code-lengths, where Monte-Carlo simulations are practically not feasible. Our numerical results, for a circuit-level depolarizing noise model, indicate that the preparation rate increases significantly, especially for large code-length N. For example, for N = 256, it increases from 0.02\% to 27\% for a practically interesting physical error rate of p = 10^{-3}. Remarkably, a Q1 code with N = 256 achieves logical error rates around 10^{-11} and 10^{-15} for p = 10^{-3} and p = 3 x 10^{-4}, respectively. This corresponds to an improvement of about three orders of magnitude compared to a surface code with similar code-length and minimum distance, thus showing the promise of the proposed scheme for large-scale fault-tolerant quantum computing.

quant-ph↗

arXiv2023

Fault-Tolerant Preparation of Quantum Polar Codes Encoding One Logical Qubit

This paper explores a new approach to fault-tolerant quantum computing (FTQC), relying on quantum polar codes. We consider quantum polar codes of Calderbank-Shor-Steane type, encoding one logical qubit, which we refer to as $\mathcal{Q}_1$ codes. First, we show that a subfamily of $\mathcal{Q}_1$ codes is equivalent to the well-known family of Shor codes. Moreover, we show that $\mathcal{Q}_1$ codes significantly outperform Shor codes, of the same length and minimum distance. Second, we consider the fault-tolerant preparation of $\mathcal{Q}_1$ code states. We give a recursive procedure to prepare a $\mathcal{Q}_1$ code state, based on two-qubit Pauli measurements only. The procedure is not by itself fault-tolerant, however, the measurement operations therein provide redundant classical bits, which can be advantageously used for error detection. Fault-tolerance is then achieved by combining the proposed recursive procedure with an error detection method. Finally, we consider the fault-tolerant error correction of $\mathcal{Q}_1$ codes. We use Steane error correction, which incorporates the proposed fault-tolerant code state preparation procedure. We provide numerical estimates of the logical error rates for $\mathcal{Q}_1$ and Shor codes of length $16$ and $64$ qubits, assuming a circuit-level depolarizing noise model. Remarkably, the $\mathcal{Q}_1$ code of length $64$ qubits achieves a logical error rate very close to $10^{-6}$ for the physical error rate $p = 10^{-3}$, therefore, demonstrating the potential of the proposed polar codes based approach to FTQC.

quant-ph↗

arXiv2021

Quantum Polarization of Qudit Channels

We provide a generalization of quantum polar codes to quantum channels with qudit-input, achieving the symmetric coherent information of the channel. Our scheme relies on a channel combining and splitting construction, where a two-qudit unitary randomly chosen from a unitary 2-design is used to combine two instances of a qudit-input channel. The inputs to the synthesized bad channels are frozen by sharing EPR pairs between the sender and the receiver, so our scheme is entanglement assisted. Using the fact that the generalized two-qudit Clifford group forms a unitary 2-design, we conclude that the channel combining operation can be chosen from this set. Moreover, we show that polarization also happens for a much smaller subset of two-qudit Cliffords, which is not a unitary 2-design. Finally, we show how to decode the proposed quantum polar codes on Pauli qudit channels.

quant-ph↗

arXiv2021

Polarization of Quantum Channels using Clifford-based Channel Combining

We provide a purely quantum version of polar codes, achieving the symmetric coherent information of any qubit-input quantum channel. Our scheme relies on a recursive channel combining and splitting construction, where a two-qubit gate randomly chosen from the Clifford group is used to combine two single-qubit channels. The inputs to the synthesized bad channels are frozen by preshared EPR pairs between the sender and the receiver, so our scheme is entanglement assisted. We further show that quantum polarization can be achieved by choosing the channel combining Clifford operator randomly, from a much smaller subset of only nine two-qubit Clifford gates. Subsequently, we show that a Pauli channel polarizes if and only if a specific classical channel over a four-symbol input set polarizes. We exploit this equivalence to prove fast polarization for Pauli channels, and to devise an efficient successive cancellation based decoding algorithm for such channels. Finally, we present a code construction based on chaining several quantum polar codes, which is shown to require a rate of preshared entanglement that vanishes asymptotically.

quant-ph↗

arXiv2021

Multilevel Polarization for Quantum Channels

Recently, a purely quantum version of polar codes has been proposed in [1] based on a quantum channel combining and splitting procedure, where a randomly chosen two-qubit Clifford unitary acts as channel combining operation. Here, we consider the quantum polar code construction using the same channel combining and splitting procedure as in [1], but with a fixed two-qubit Clifford unitary. For the family of Pauli channels, we show that polarization happens in multi-levels, where synthesized quantum virtual channels tend to become completely noisy, half-noisy, or noiseless. Further, we present a quantum polar code exploiting the multilevel nature of polarization, and provide an efficient decoding for this code. We show that half-noisy channels can be frozen by fixing their inputs in either the amplitude or the phase basis, which allows reducing the number of preshared EPR pairs compared to the construction in [1]. We provide an upper bound on the number of preshared EPR pairs, which is an equality in the case of the quantum erasure channel. To improve the speed of polarization, we propose an alternative construction, which again polarizes in multi-levels, and the previous upper bound on the number of preshared EPR pairs also holds. For a quantum erasure channel, we confirm by numerical analysis that the multilevel polarization happens relatively faster for the alternative construction.

quant-ph↗