arXiv subjects

Ashutosh Rao

Publications and source records attributed to Ashutosh Rao.

16 recordsLinked to original sources

arXiv2026

Distilled remote entanglement between superconducting qubits across optical channels

A promising quantum computing architecture comprises modules of superconducting quantum processors linked via optical channels using quantum transducers. As quantum transducer hardware improves, a need has arisen to understand the quantitative relationship between transducer-device characteristics and the strength of the resulting remote entanglement. Using Monte Carlo simulations that incorporate 2-to-1 and 3-to-1 entanglement distillation methods, our model maps transducer device performance up to system-level channel performance, thereby allowing the performance of remote entanglement approaches to be compared and optimized. We find the extreme photon loss (EPL) distillation protocol to be particularly high performing. Moreover, even without distillation, present-day transducers with added noise of photons are at the threshold of enabling remote Bell pairs with fidelities exceeding 50%. If the next generation of transducers can improve by 3 orders of magnitude in added noise, efficiency, and repetition rates, then they would allow for remote two-qubit gates achieving 99.7% fidelities at MHz rates. These results set practical targets for transducers to be ready for deployment into modular quantum computing systems.

quant-ph↗

arXiv2021

Hybrid-mode-family Kerr optical parametric oscillation for robust coherent light generation on chip

Optical parametric oscillation (OPO) using the third-order nonlinearity ($χ^{(3)}$) in integrated photonics platforms is an emerging approach for coherent light generation, and has shown great promise in achieving broad spectral coverage with small device footprints and at low pump powers. However, current $χ^{(3)}$ nanophotonic OPO devices use pump, signal, and idler modes of the same transverse spatial mode family. As a result, such single-mode-family OPO (sOPO) is inherently sensitive in dispersion and can be challenging to scalably fabricate and implement. In this work, we propose to use different families of transverse spatial modes for pump, signal, and idler, which we term as hybrid-mode-family OPO (hOPO). We demonstrate its unprecedented robustness in dispersion versus device geometry, pump frequency, and temperature. Moreover, we show the capability of the hOPO scheme to generate a few milliwatts of output signal power with a power conversion efficiency of approximately 8 $\%$ and without competitive processes. The hOPO scheme is an important counterpoint to existing sOPO approaches, and is particularly promising as a robust method to generate coherent on-chip visible and infrared light sources.

physics.optics↗

arXiv2021

Ultra-Broadband Kerr Microcomb Through Soliton Spectral Translation

Broad bandwidth and stable microresonator frequency combs are critical for accurate and precise optical frequency measurements in a compact and deployable format. Typically, broad bandwidths (e.g., octave spans) are achieved by tailoring the microresonator's geometric dispersion. However, geometric dispersion engineering alone may be insufficient for sustaining bandwidths well beyond an octave. Here, we introduce the novel concept of synthetic dispersion, in which a second pump laser effectively alters the dispersion landscape to create Kerr soliton microcombs that extend far beyond the anomalous geometric dispersion region. Through detailed numerical simulations, we show that the synthetic dispersion model captures the system's key physical behavior, in which the second pump enables non-degenerate four-wave mixing that produces new dispersive waves on both sides of the spectrum. We experimentally demonstrate these concepts by pumping a silicon nitride microring resonator at 1060 nm and 1550 nm to generate a single soliton microcomb whose bandwidth approaches two octaves (137 THz to 407 THz) and whose phase coherence is verified through beat note measurements. Such ultra-broadband microcombs provide new opportunities for full microcomb stabilization in optical frequency synthesis and optical atomic clocks, while the synthetic dispersion concept can extend microcomb operation to wavelengths that are hard to reach solely through geometric dispersion engineering.

physics.optics↗

arXiv2020

Proposal for noise-free visible-telecom quantum frequency conversion through third-order sum and difference frequency generation

Quantum frequency conversion (QFC) between the visible and telecom is a key functionality to connect quantum memories over long distances in fiber-based quantum networks. Current QFC methods for linking such widely-separated frequencies, such as sum/difference frequency generation and four-wave mixing Bragg scattering, are prone to broadband noise from the pump laser(s). To address this issue, we propose to use third-order sum/difference frequency generation (TSFG/TDFG) for an upconversion/downconversion QFC interface. In this process, two pump photons combine their energy and momentum to mediate frequency conversion across visible and telecom bands, bridging a large spectral gap with long-wavelength pump pho-tons, which is particularly beneficial from the noise perspective. We show that waveguide-coupled silicon nitride microring resonators can be designed for efficient QFC between 606 nm and 1550 nm via a 1990 nm pump through TSFG/TDFG. We simulate the device dispersion and coupling, and from the simulated parameters estimate that the frequency conversion can be efficient (>80 %) at 50 mW pump power. Our results suggest that microresonator-based TSFG/TDFG is promising for compact, scalable, and low power QFC across large spectral gaps.

physics.optics↗

arXiv2020

Integrated photonic interposers for processing octave-spanning microresonator frequency combs

Microcombs - optical frequency combs generated in microresonators - have advanced tremendously in the last decade, and are advantageous for applications in frequency metrology, navigation, spectroscopy, telecommunications, and microwave photonics. Crucially, microcombs offer the prospect of fully integrated miniaturized optical systems with unprecedented reductions in cost, size, weight, and power. However, this goal has been consistently hindered by the use of bulk free-space and fiber-optic components to process microcombs, limiting form factors to the table-top. Here, we address this challenge by introducing an integrated photonics interposer architecture to process microcombs and replace discrete components. Taking microcomb-based optical frequency synthesis in the telecom C-band around 1550 nm as our target application, we develop an interposer architecture that collects, routes, and interfaces octave-wide optical signals between photonic chiplets and heterogeneously integrated devices that constitute the synthesizer. We have implemented the octave spanning spectral filtering of a microcomb, central to the interposer, in the popular silicon nitride photonic platform, and have confirmed the requisite performance of the individual elements of the interposer. Moreover, we show that the thick silicon nitride needed for bright dissipative Kerr soliton generation can be integrated with the comparatively thin silicon nitride interposer layer through octave-bandwidth adiabatic evanescent coupling, indicating a path towards future system-level consolidation. Our interposer architecture addresses the immediate need for on-chip microcomb processing to successfully miniaturize microcomb systems. As microcombs and integrated devices evolve, our approach can be readily adapted to other metrology-grade applications based on optical atomic clocks and high-precision navigation and spectroscopy.

physics.app-ph↗

arXiv2020

A universal frequency engineering tool for microcavity nonlinear optics: multiple selective mode splitting of whispering-gallery resonances

Whispering-gallery microcavities have been used to realize a variety of efficient parametric nonlinear optical processes through the enhanced light-matter interaction brought about by supporting multiple high quality factor and small modal volume resonances. Critical to such studies is the ability to control the relative frequencies of the cavity modes, so that frequency matching is achieved to satisfy energy conservation. Typically this is done by tailoring the resonator cross-section. Doing so modifies the frequencies of all of the cavity modes, that is, the global dispersion profile, which may be undesired, for example, in introducing competing nonlinear processes.Here, we demonstrate a frequency engineering tool, termed multiple selective mode splitting (MSMS), that is independent of the global dispersion and instead allows targeted and independent control of the frequencies of multiple cavity modes. In particular, we show controllable frequency shifts up to 0.8 nm, independent control of the splitting of up to five cavity modes with optical quality factors $\gtrsim 10^5$, and strongly suppressed frequency shifts for untargeted modes. The MSMS technique can be broadly applied to a wide variety of nonlinear optical processes across different material platforms, and can be used to both selectively enhance processes of interestand suppress competing unwanted processes.

physics.optics↗

arXiv2020

Dissipative Kerr Solitons in a III-V Microresonator

We demonstrate stable microresonator Kerr soliton frequency combs in a III-V platform (AlGaAs on SiO$_2$) through quenching of thermorefractive effects by cryogenic cooling to temperatures between 4~K and 20~K. This cooling reduces the resonator's thermorefractive coefficient, whose room-temperature value is an order of magnitude larger than that of other microcomb platforms like Si$_3$N$_4$, SiO$_2$, and AlN, by more than two orders of magnitude, and makes soliton states adiabatically accessible. Realizing such phase-stable soliton operation is critical for applications that fully exploit the ultra-high effective nonlinearity and high optical quality factors exhibited by this platform.

physics.optics↗

arXiv2020

Efficient photo-induced second harmonic generation in silicon photonics

Silicon photonics lacks a second-order nonlinear optical response in general because the typical constituent materials are centro-symmetric and lack inversion symmetry, which prohibits second-order nonlinear processes such as second harmonic generation (SHG). Here, for the first time, we realize efficient SHG in a silicon-based optical microresonator by combining a strong photo-induced effective second-order nonlinearity with resonant enhancement and perfect-phase matching. We show a record-high conversion efficiency of 2,500 %/W, which is 2 to 4 orders of magnitude larger than previous works. In particular, our devices realize mW-level SHG output powers with > 20 % power conversion efficiency. This demonstration is a major breakthrough in realizing efficient second-order nonlinear processes in silicon photonics, and paves the way for integrated self-referencing of Kerr frequency combs for compact optical frequency synthesis and optical clock technologies.

physics.optics↗

arXiv2020

On-chip optical parametric oscillation into the visible: generating red, orange, yellow, and green from a near-infrared pump

Optical parametric oscillation (OPO) in a microresonator is promising as an efficient and scalable approach to on-chip coherent visible light generation. However, so far only red light at < 420 THz (near the edge of the visible band) has been reported. In this work, we demonstrate on-chip OPO covering > 130 THz of the visible spectrum, including red, orange, yellow, and green wavelengths. In particular, using a pump laser that is scanned 5 THz in the near-infrared from 386 THz to 391 THz, the signal is tuned from the near-infrared at 395 THz to the visible at 528 THz, while the idler is tuned from the near-infrared at 378 THz to the infrared at 254 THz. The widest signal-idler separation we demonstrate of 274 THz corresponds to more than an octave span and is the widest demonstrated for a nanophotonic OPO to date. Our work is a clear demonstration of how nonlinear nanophotonics can transform light from readily accessible compact near-infrared lasers to targeted visible wavelengths of interest, which is crucial for field-level deployment of spectroscopy and metrology systems.

physics.optics↗

arXiv2019

Kerr Microresonator Soliton Frequency Combs at Cryogenic Temperatures

We present measurements of silicon nitride nonlinear microresonators and frequency comb generation at cryogenic temperatures as low as 7~K. The resulting two orders of magnitude reduction in the thermo-refractive coefficient relative to room-temperature enables direct access to single bright Kerr soliton states through adiabatic frequency tuning of the pump laser while remaining in thermal equilibrium. Our experimental results, supported by theoretical modeling, show that single solitons are easily accessible at temperatures below 60~K for the microresonator device under study. We further demonstrate that the cryogenic temperature primarily impacts the thermo-refractive coefficient. Other parameters critical to the generation of solitons, such as quality factor, dispersion, and effective nonlinearity, are unaltered. Finally, we discuss the potential improvement in thermo-refractive noise resulting from cryogenic operation. The results of this study open up new directions in advancing chip-scale frequency comb optical clocks and metrology at cryogenic temperatures.

physics.optics↗

arXiv2019

Broadband Resonator-Waveguide Coupling for Efficient Extraction of Octave Spanning Microcombs

Frequency combs spanning over an octave have been successfully demonstrated in Kerr nonlinear microresonators on-chip. These micro-combs rely on both engineered dispersion, to enable generation of frequency components across the octave, and on engineered coupling, to efficiently extract the generated light into an access waveguide while maintaining a close to critically-coupled pump. The latter is challenging as the spatial overlap between the access waveguide and the ring modes decays with frequency. This leads to strong coupling variation across the octave, with poor extraction at short wavelengths. Here, we investigate how a waveguide wrapped around a portion of the resonator, in a pulley scheme, can improve extraction of octave-spanning microcombs, in particular at short wavelengths. We use coupled mode theory to predict the performance of the pulley couplers, and demonstrate good agreement with experimental measurements. Using an optimal pulley coupling design, we demonstrate a 20~dB improvement in extraction at short wavelengths compared to straight waveguide coupling.

physics.optics↗

arXiv2019

Milliwatt-threshold visible-telecom optical parametric oscillation using silicon nanophotonics

The on-chip creation of coherent light at visible wavelengths is crucial to field-level deployment of spectroscopy and metrology systems. Although on-chip lasers have been implemented in specific cases, a general solution that is not restricted by limitations of specific gain media has not been reported. Here, we propose creating visible light from an infrared pump by widely-separated optical parametric oscillation (OPO) using silicon nanophotonics. The OPO creates signal and idler light in the 700 nm and 1300 nm bands, respectively, with a 900 nm pump. It operates at a threshold power of (0.9 +/- 0.1) mW, over 50x smaller than other widely-separated microcavity OPO works, which have only been reported in the infrared. This low threshold enables direct pumping without need of an intermediate optical amplifier. We further show how the device design can be modified to generate 780 nm and 1500 nm light with a similar power efficiency. Our nanophotonic OPO shows distinct advantages in power efficiency, operation stability, and device scalability, and is a major advance towards flexible on-chip generation of coherent visible light.

physics.optics↗

arXiv2019

Efficient telecom-to-visible spectral translation through ultra-low power nonlinear nanophotonics

The ability to spectrally translate lightwave signals in a compact, low-power platform is at the heart of the promise of nonlinear nanophotonic technologies. For example, a device to link the telecommunications band with visible and short near-infrared wavelengths can enable a connection between high-performance chip-integrated lasers based on scalable nanofabrication technology with atomic systems used for time and frequency metrology. While second-order nonlinear (χ^(2)) systems are the natural approach for bridging such large spectral gaps, here we show that third-order nonlinear (chi^(3)) systems, despite their typically much weaker nonlinear response, can realize spectral translation with unprecedented performance. By combining resonant enhancement with nanophotonic mode engineering in a silicon nitride microring resonator, we demonstrate efficient spectral translation of a continuous-wave signal from the telecom band (~ 1550 nm) to the visible band (~ 650 nm) through cavity-enhanced four-wave mixing. We achieve such translation over a wide spectral range >250 THz with a translation efficiency of (30.1 +/- 2.8) % and using an ultra-low pump power of (329 +/- 13) uW. The translation efficiency projects to (274 +/- 28) % at 1 mW and is more than an order of magnitude larger than what has been achieved in current nanophotonic devices.

physics.optics↗

arXiv2017

Topographically anisotropic photonics for broadband integrated polarization diversity

Integrated polarimetric receivers have the potential to define a new generation of lightweight, high-performance instrumentation for remote sensing. To date, on-chip polarization-selective devices such as polarizing beam-splitters have yet to even approach the necessary performance, due to fundamental design limitations. Here, we propose, simulate and experimentally demonstrate a method for realizing spatially-mapped birefringence onto integrated photonic circuits, deemed topographically anisotropic photonics. With this robust and widely tolerant approach, devices can be constructed with strongly polarization-dependent modal properties and minimal wavelength dependence. An integrated polarizing beam-splitter (PBS) is realized with unprecedented performance: a record 0.52 octaves of fractional bandwidth (116 THz), maximum insertion loss of 1.4 +/- 0.8 dB, and a minimum extinction ratio of 16 +/- 3 dB, pushing it into the realm of wideband spectroscopy and imaging applications. Additionally, novel photonic structures such as polarization-selective beam-taps and polarization-selective microring resonators are demonstrated, enabling new on-chip polarimetric receiver architectures.

physics.optics↗

arXiv2016

Second-harmonic generation in single-mode integrated waveguides through mode-shape modulation

A simple and flexible technique for achieving quasi-phase-matching in integrated photonic waveguides without periodic poling is proposed and experimentally demonstrated, referred to as mode-shape-modulation (MSM). It employs a periodic variation of waveguide width to modulate the intensity of the pump wave, effectively suppressing out-of-phase light generation. This technique is applied to the case of second-harmonic generation in thin-film lithium niobate ridge waveguides. MSM waveguides are fabricated and characterized with pulsed-pumping in the near-infrared, showing harmonic generation at a signal wavelength of 784 nm.

physics.optics↗

arXiv2016

Second-harmonic generation in periodically-poled thin film lithium niobate wafer-bonded on silicon

Second-order optical nonlinear effects (second-harmonic and sum-frequency generation) are demonstrated in the telecommunication band by periodic poling of thin films of lithium niobate wafer-bonded on silicon substrates and rib-loaded with silicon nitride channels to attain ridge waveguide with cross-sections of ~ 2 μm2. The compactness of the waveguides results in efficient second-order nonlinear devices. A nonlinear conversion of 8% is obtained with a pulsed input in 4 mm long waveguides. The choice of silicon substrate makes the platform potentially compatible with silicon photonics, and therefore may pave the path towards on-chip nonlinear and quantum-optic applications.

physics.optics↗