arXiv subjects

Ashwin K. Iyer

Publications and source records attributed to Ashwin K. Iyer.

8 recordsLinked to original sources

arXiv2020

A Strongly Miniaturized and Inherently Matched Folded Dipole Antenna for Narrowband Applications

A novel miniaturized printed folded dipole antenna has been designed for narrowband sensing applications. It is shown that the antenna may be systematically engineered to achieve matching to a practical source impedance at frequencies well below its half-wavelength resonance using series-LC loading and asymmetrical arm widths. This approach is used to design an inherently well-matched antenna that does not require an external matching network and demonstrates approximately 75% miniaturization, excellent co- to cross-polarization separation, over 24 dB higher realized gain, and strongly improved radiation efficiency relative to an unloaded folded dipole of the same electrically small size. Experimental validation of a fabricated prototype demonstrates excellent agreement with simulations.

physics.app-ph↗

arXiv2017

Strongly Enhanced Sensitivity in Planar Microwave Sensors Based on Metamaterial coupling

Limited sensitivity and sensing range are arguably the greatest challenges in microwave sensor design. Recent attempts to improve these properties have relied on metamaterial- (MTM-) inspired open-loop resonators (OLRs) coupled to transmission lines (TLs). Although the strongly resonant properties of the OLR sensitively reflect small changes in the environment through a shift in its resonance frequency, the resulting sensitivities remain ultimately limited by the level of coupling between the OLR and the TL. This work introduces a novel solution to this problem that employs negative-refractiveindex TL (NRI-TL) MTMs to substantially improve this coupling so as to fully exploit its resonant properties. A MTM-infused planar microwave sensor is designed for operation at 2.5 GHz, and is shown to exhibit a significant improvement in sensitivity and linearity. A rigorous signal-flow analysis (SFA) of the sensor is proposed and shown to provide a fully analytical description of all salient features of both the conventional and MTM-infused sensors. Full-wave simulations confirm the analytical predictions, and all data demonstrate excellent agreement with measurements of a fabricated prototype. The proposed device is shown to be especially useful in the characterization of commonly-available high-permittivity liquids as well as in sensitively distinguishing concentrations of ethanol/methanol in water.

physics.app-ph↗

arXiv2017

On the Unique Determination of Modal Multiconductor Transmission-Line Properties

Some modal (or decoupled) transmission-line properties such as per-unit-length impedance, admittance, or characteristic impedance have long been held to be, in general, non-unique. This ambiguity arises from the nature of the similarity transformations used to relate the terminal and modal domains, for which the voltage transformation matrix has been shown to be only loosely related to the corresponding current transformation matrix. Modern methods have attempted to relate the two, but these relations typically rely on arbitrary normalizations, leading to strictly incorrect and/or non-unique results. This work introduces relations between the two transformations, derived from the physical equivalence of total power and currents between the two domains, by which the transformation matrices can be unambiguously related to each other, and the modal properties uniquely solved. This technique allows for the correct extraction of the modal transmission-line properties for any arbitrary system of conductors. Multiple examples are studied to validate the proposed solution process.

physics.class-ph↗

arXiv2017

Anisotropic Metamaterial Optical Fibers

Internal physical structure can drastically modify the properties of waveguides: photonic crystal fibers are able to confine light inside a hollow air core by Bragg scattering from a periodic array of holes, while metamaterial loaded waveguides for microwaves can support propagation at frequencies well below cutoff. Anisotropic metamaterials assembled into cylindrically symmetric geometries constitute light-guiding structures that support new kinds of exotic modes. A microtube of anodized nanoporous alumina, with nanopores radially emanating from the inner wall to the outer surface, is a manifestation of such an anisotropic metamaterial optical fiber. The nanopores, when filled with a plasmonic metal such as silver or gold, greatly increase the electromagnetic anisotropy. The modal solutions in anisotropic circular waveguides can be uncommon Bessel functions with imaginary orders.

physics.optics↗

arXiv2015

Experimental Verification of Below-Cutoff Propagation in Miniaturized Circular Waveguides Using Anisotropic ENNZ Metamaterial Liners

This paper presents experimental verification of below-cutoff transmission through miniaturized waveguides whose interior is coated with a thin anisotropic metamaterial liner possessing epsilon-negative and near-zero (ENNZ) properties. These liners are realized using a simple, printed-circuit implementation based on inductively loaded wires, and introduce an HE$_{11}$ mode well below the natural cutoff frequency. The inclusion of the liner is shown to substantially improve the transmission between two embedded shielded-loop sources. A homogenization scheme is developed to characterize the liner's anisotropic effective-medium parameters, which is shown to accurately describe a set of frequency-reduced cutoffs. The fabrication of the lined waveguide is discussed, and the experimental and simulated transmission results are shown to be in agreement.

physics.optics↗

arXiv2014

Miniaturized Circular-Waveguide Probe Antennas Using Metamaterial Liners

This work presents the radiation performance of open-ended circular-waveguide probe antennas that have been miniaturized by the introduction of thin metamaterial liners. The liners introduce an HE$_{11}$ mode well below the natural cutoff frequency, which provides substantial gain improvements over a similarly sized waveguide probe. A new feeding arrangement employing a shielded-loop source embedded inside the miniaturized waveguide is developed to efficiently excite the HE$_{11}$ mode and avoid the excitation of other modes across the frequency reduced band while maintaining the antenna's compactness. A metamaterial-lined circular-waveguide probe antenna operating over 42% below its natural cutoff frequency is designed to provide a radiation efficiency of up to 28.8%. A simple, printed-circuit implementation of the metamaterial liner based on inductively loaded wires is proposed and its dispersion features are discussed.

physics.optics↗

arXiv2013

Below-Cutoff Propagation in Metamaterial-Lined Circular Waveguides

This paper investigates the propagation characteristics of circular waveguides whose interior surface is coated with a thin metamaterial liner possessing dispersive, negative, and near-zero permittivity. A field analysis of this system produces the dispersion of complex modes, and reveals in detail intriguing phenomena such as backward-wave propagation below the unlined waveguide's fundamental-mode cutoff, resonant tunneling of power, field collimation, and miniaturization. It is shown how the waveguide geometry and metamaterial parameters may be selected to engineer the lined waveguide's spectral response. Theoretical dispersion and transmission results are closely validated by full-wave simulations.

physics.optics↗

arXiv2008

Free-Space Imaging Beyond the Diffraction Limit Using a Veselago-Pendry Transmission-Line Superlens

Focusing using conventional lenses relies on the collection and interference of propagating waves, but discounts the evanescent waves that decay rapidly from the source. Since these evanescent waves contain the finest details of the source, the image suffers a loss of resolution and is referred to as 'diffraction-limited'. Superlensing is the ability to create an image with fine features beyond the diffraction limit, and can be achieved with a 'Veselago-Pendry' lens made from a metamaterial. Such a Veselago-Pendry superlens for imaging in free space must be stringently designed to restore both propagating and evanescent waves, but meeting these design conditions (isotropic n = epsilon_r = mu_r = -1) has proven difficult and has made its realization elusive. We demonstrate free-space imaging with a resolution over three times better than the diffraction limit at microwave frequencies using a Veselago-Pendry metamaterial superlens based on the negative-refractive-index transmission-line (NRI-TL) approach, which affords precise control over its electromagnetic properties and is also less susceptible to losses than other approaches. A microwave superlens can be particularly useful for illumination and discrimination of closely spaced buried objects over practical distances by way of back-scattering, e.g. in tumour or landmine detection, or for targeted irradiation/hyperthermia.

physics.optics↗