arXiv subjects

Atsushi Noguchi

Publications and source records attributed to Atsushi Noguchi.

At least 37 records · Page 2Linked to original sources

arXiv2022

Feasibility study on ground-state cooling and single-phonon readout of trapped electrons using hybrid quantum systems

Qubits of long coherence time and fast quantum operations are long-sought objectives towards the realization of high-fidelity quantum operations and their applications to the quantum technologies. An electron levitated in a vacuum by a Paul trap is expected to be a good candidate, for its light mass and hence the high secular frequency which allows for the faster gate operations than those in trapped ions. Controlling the motional state of the trapped electron is a crucial issue, for it mediates an interaction between electron spins, intrinsic qubits embedded in electrons, and its decoherence results in degraded fidelity of two-qubit gates. In addition, an efficient readout of the motional state is important, regarding the possibility of detecting spin state by using it. Despite of such an importance, how to achieve the motional ground state and how to efficiently detect it are not reported so far. Here we propose methods addressing these issues by utilizing hybrid quantum systems involving electron-superconducting circuit and electron-ion coupled systems and analyze the feasibility of our schemes. In both systems, we show that the ground-state cooling and the single-phonon readout of the motional state of the trapped electron are possible. Our work shed light on the way to precisely control the motional states of the trapped electrons, that provides an interesting playground for the development of quantum technologies.

quant-ph↗

arXiv2021

Deterministic loading of a single strontium ion into a surface electrode trap using pulsed laser ablation

Trapped-ion quantum technologies have been developed for decades toward applications such as precision measurement, quantum communication and quantum computation. Coherent manipulation of ions' oscillatory motions in an ion trap is important for quantum information processing by ions, however, unwanted decoherence caused by fluctuating electric-field environment often hinders stable and high-fidelity operations.. One way to avoid this is to adopt pulsed laser ablation for ion loading, a loading method with significantly reduced pollution and heat production. Despite the usefulness of the ablation loading such as the compatibility with cryogenic environment, randomness of the number of loaded ions is still problematic in realistic applications where definite number of ions are preferably loaded with high probability. In this paper, we demonstrate an efficient loading of a single strontium ion into a surface electrode trap generated by laser ablation and successive photoionization. The probability of single-ion loading into a surface electrode trap is measured to be 82\,\%, and such a deterministic single-ion loading allows for loading ions into the trap one-by-one. Our results open up a way to develop more functional ion-trap quantum devices by the clean, stable, and deterministic ion loading.

quant-ph↗

arXiv2021

Superconducting Acousto-optic Phase Modulator

We report the development of a superconducting acousto-optic phase modulator fabricated on a lithium niobate substrate. A titanium-diffused optical waveguide is placed in a surface acoustic wave resonator, where the electrodes for mirrors and an interdigitated transducer are made of a superconducting niobium titanium nitride thin film. The device performance is evaluated as a substitute for the current electro-optic modulators, with the same fiber coupling scheme and comparable device size. Operating the device at a cryogenic temperature (T=8K), we observe the length-half-wave-voltage (length-$V_π$) product of 1.78 V$\cdot$cm. Numerical simulation is conducted to reproduce and extrapolate the performance of the device. An optical cavity with mirror coating on the input/output facets of the optical waveguide is tested for further enhancement of the modulation efficiency. A simple extension of the current device is estimated to achieve an efficient modulation with $V_π=$ 0.27 V.

quant-ph↗

arXiv2021

The visualisation of two-dimensional dose distribution on X-ray CT using radiochromic film

X-ray CT dose measurement has mainly been performed using an ionization chamber dosimeter. Therefore, the dose distribution has not been sufficiently studied. We investigated the importance of evaluating the two or three-dimensional dose distributions for X-ray computed tomography (CT). To confirm this purpose, we investigated the effects of phantom size and exposure parameters on the phantom diameter. We performed 12 scans using XR-QA2 film and cylindrical acrylic phantoms of two lengths. The tube current and slice thicknesses were varied as exposure parameters. The dose distribution of the primary and scattered radiation was visu-alised using ImageJ. The results were evaluated using the profile curves, three-dimensional surface plots, and subtrac-tion dose images. We observed changes in the dose distributions for scans with and without phantoms. However, no significant differ-ence in the dose distribution was observed with changes in the lengths of the phantom. To visualise the dose distribution, three-dimensional surface plots and subtraction images were found helpful. We must confirm that the dose distribution does not change for phantoms with multiple diameters in future studies. For using a clinical application, accurate quantitative assessment of dose distribution requires improved accuracy of the calibration curve.

physics.med-ph↗

arXiv2020

Dissipation-based Quantum Sensing of Magnons with a Superconducting Qubit

Hybrid quantum devices expand the tools and techniques available for quantum sensing in various fields. Here, we experimentally demonstrate quantum sensing of the steady-state magnon population in a magnetostatic mode of a ferrimagnetic crystal. Dispersively coupling the magnetostatic mode to a superconducting qubit allows the detection of magnons using Ramsey interferometry with a sensitivity on the order of $10^{-3}$ $\text{magnons}/\sqrt{\text{Hz}}$. The protocol is based on dissipation as dephasing via fluctuations in the magnetostatic mode reduces the qubit coherence proportionally to the number of magnons.

quant-ph↗

arXiv2020

Fast parametric two-qubit gates with suppressed residual interaction using a parity-violated superconducting qubit

We demonstrate fast two-qubit gates using a parity-violated superconducting qubit consisting of a capacitively-shunted asymmetric Josephson-junction loop under a finite magnetic flux bias. The second-order nonlinearity manifesting in the qubit enables the interaction with a neighboring single-junction transmon qubit via first-order inter-qubit sideband transitions with Rabi frequencies up to 30~MHz. Simultaneously, the unwanted static longitudinal~(ZZ) interaction is eliminated with ac Stark shifts induced by a continuous microwave drive near-resonant to the sideband transitions. The average fidelities of the two-qubit gates are evaluated with randomized benchmarking as 0.967, 0.951, 0.956 for CZ, iSWAP and SWAP gates, respectively.

quant-ph↗

arXiv2020

Single-photon quantum regime of artificial radiation pressure on a surface acoustic wave resonator

Electromagnetic fields carry momentum, which upon reflection on matter gives rise to the radiation pressure of photons. The radiation pressure has recently been utilized in cavity optomechanics for controlling mechanical motions of macroscopic objects at the quantum limit. However, because of the weakness of the interaction, attempts so far had to use a strong coherent drive to reach the quantum limit Therefore, the single-photon quantum regime, where even the presence of a totally off-resonant single photon alters the quantum state of the mechanical mode significantly, is one of the next milestones in cavity optomechanics. Here we demonstrate an artificial realization of the radiation pressure of microwave photons acting on phonons in a surface acoustic wave resonator. The order-of-magnitude enhancement of the interaction strength originates in the well-tailored strong second-order nonlinearity of a superconducting Josephson-junction circuit. The synthetic radiation pressure interaction adds a key element to the quantum optomechanical toolbox and can be applied to quantum information interfaces between electromagnetic and mechanical degrees of freedom.

quant-ph↗

arXiv2020

Radio-Frequency-to-Optical Conversion using Acoustic and Optical Whispering Gallery Modes

Whispering gallery modes (WGMs), circulating modes near the surface of a spheroidal material, have been known to exhibit high quality factors for both acoustic and electromagnetic waves. Here, we report an electro-optomechanical system, where the overlapping WGMs of acoustic and optical waves along the equator of a dielectric sphere strongly couple to each other. The triple-resonance phase-matching condition provides a large enhancement of the Brillouin scattering only in a single sideband, and conversion from the input radio-frequency signal exciting the acoustic mode to the output optical signal is observed.

physics.optics↗

arXiv2020

Breaking the trade-off between fast control and long lifetime of a superconducting qubit

The rapid development in designs and fabrication techniques of superconducting qubits has helped making coherence times of qubits longer. In the near future, however, the radiative decay of a qubit into its control line will be a fundamental limitation, imposing a trade-off between fast control and long lifetime of the qubit. In this work, we successfully break this trade-off by strongly coupling another superconducting qubit along the control line. This second qubit, which we call a Josephson quantum filter (JQF), prevents the qubit from emitting microwave photons and thus suppresses its relaxation, while faithfully transmitting large-amplitude control microwave pulses due to the saturation of the quantum filter, enabling fast qubit control. We observe an improvement of the qubit relaxation time without a reduction of the Rabi frequency. This device could potentially help in the realization of a large-scale superconducting quantum information processor in terms of the heating of the qubit environments and the crosstalk between qubits.

quant-ph↗

arXiv2018

Electro-mechano-optical detection of nuclear magnetic resonance

Signal reception of nuclear magnetic resonance (NMR) usually relies on electrical amplification of the electromotive force caused by nuclear induction. Here, we report up-conversion of a radio-frequency NMR signal to an optical regime using a high-stress silicon nitride membrane that interfaces the electrical detection circuit and an optical cavity through the electro-mechanical and the opto-mechanical couplings. This enables optical NMR detection without sacrificing the versatility of the traditional nuclear induction approach. While the signal-to-noise ratio is currently limited by the Brownian motion of the membrane as well as additional technical noise, we find it can exceed that of the conventional electrical schemes by increasing the electro-mechanical coupling strength. The electro-mechano-optical NMR detection presented here opens the possibility of mechanical parametric amplification of NMR signals. Moreover, it can potentially be combined with the laser cooling technique applied to nuclear spins.

quant-ph↗

arXiv2017

Qubit-assisted transduction for a detection of surface acoustic waves near the quantum limit

We demonstrate ultra-sensitive measurement of fluctuations in a surface-acoustic-wave~(SAW) resonator using a hybrid quantum system consisting of the SAW resonator, a microwave (MW) resonator and a superconducting qubit. The nonlinearity of the driven qubit induces parametric coupling, which up-converts the excitation in the SAW resonator to that in the MW resonator. Thermal fluctuations of the SAW resonator near the quantum limit are observed in the noise spectroscopy in the MW domain.

quant-ph↗

arXiv2017

Cavity optomechanics with surface acoustic waves

We report a development of an electro-optomechanical system based on a surface acoustic wave (SAW), where a piezoelectric material with a large optoelastic susceptibility is used for the coupling of both a radio wave and optical light to the SAW. In the optical domain, we exploit a tensorial nature of the optoelastic effect to show a polarization dependence of the photon-SAW interaction. We discuss the construction of two-dimensional SAW focusing circuits for the coupling enhancement and the optical cavity enhanced photon-phonon scattering. We estimate an optomechanical coupling rate $g_0$ of the system and discuss the future direction for the improvement of the coupling strength.

quant-ph↗

arXiv2016

Resolving magnon number states in quantum magnonics

Collective excitation modes in solid state systems play a central role in circuit quantum electrodynamics, cavity optomechanics, and quantum magnonics. In the latter, quanta of collective excitation modes in a ferromagnet, called magnons, interact with qubits to provide the nonlinearity necessary to access quantum phenomena in magnonics. A key ingredient for future quantum magnonics systems is the ability to probe magnon states. Here we observe individual magnons in a millimeter-sized ferromagnet coherently coupled to a superconducting qubit. Specifically, we resolve magnon number states in spectroscopic measurements of a transmon qubit with the hybrid system in the strong dispersive regime. This enables us to detect a change in the magnetic dipole of the ferromagnet equivalent to a single spin flipped among more than $10^{19}$ spins. The strong dispersive regime of quantum magnonics opens up the possibility of encoding superconducting qubits into non-classical magnon states, potentially providing a coherent interface between a superconducting quantum processor and optical photons.

quant-ph↗

arXiv2016

Surface-electrode trap with an integrated permanent magnet for generating a magnetic-field gradient at trapped ions

We report on a surface-electrode trap with SmCo magnets arranged in a quadrupole configuration underneath the trap electrode. Because the distance between the magnets and the trapped ions can be as little as several hundred micrometers, a large magnetic field is produced without any heat management. The magnetic-field gradient was measured using the Zeeman splitting of a single trapped $^{40}$Ca$^+$ ion at several positions, and a field gradient of 36 T/m was obtained. Such a field gradient is useful for the generation of a state-dependent force, which is important for quantum simulation and/or quantum gate operation using radio-frequency or microwave radiation.

physics.atom-ph↗

arXiv2016

Bidirectional conversion between microwave and light via ferromagnetic magnons

Coherent conversion of microwave and optical photons in the single-quantum level can significantly expand our ability to process signals in various fields. Efficient up-conversion of a feeble signal in the microwave domain to the optical domain will lead to quantum-noise-limited microwave amplifiers. Coherent exchange between optical photons and microwave photons will also be a stepping stone to realize long-distance quantum communication. Here we demonstrate bidirectional and coherent conversion between microwave and light using collective spin excitations in a ferromagnet. The converter consists of two harmonic oscillator modes, a microwave cavity mode and a magnetostatic mode called Kittel mode, where microwave photons and magnons in the respective modes are strongly coupled and hybridized. An itinerant microwave field and a travelling optical field can be coupled through the hybrid system, where the microwave field is coupled to the hybrid system through the cavity mode, while the optical field addresses the hybrid system through the Kittel mode via Faraday and inverse Faraday effects. The conversion efficiency is theoretically analyzed and experimentally evaluated. The possible schemes for improving the efficiency are also discussed.

quant-ph↗

arXiv2016

Strong coupling in multimode quantum electromechanics

Cavity electro-(opto-)mechanics allows us to access not only single isolated but also multiple mechanical modes in a massive object. Here we develop a multi-mode electromechanical system in which a several membrane vibrational modes are coupled to a three-dimensional loop-gap superconducting microwave cavity. The tight confinement of the electric field across a mechanically-compliant narrow-gap capacitor brings the system into the quantum strong coupling regime under a red-sideband pump field. We demonstrate strong coupling between two mechanical modes, which is induced by two-tone parametric drives and mediated by a virtual photon in the cavity. The tunable inter-mechanical-mode coupling can be used to generate entanglement between the mechanical modes.

quant-ph↗

arXiv2015

Quantum magnonics: magnon meets superconducting qubit

The techniques of microwave quantum optics are applied to collective spin excitations in a macroscopic sphere of ferromagnetic insulator. We demonstrate, in the single-magnon limit, strong coupling between a magnetostatic mode in the sphere and a microwave cavity mode. Moreover, we introduce a superconducting qubit in the cavity and couple the qubit with the magnon excitation via the virtual photon excitation. We observe the magnon-vacuum-induced Rabi splitting. The hybrid quantum system enables generation and characterization of non-classical quantum states of magnons.

quant-ph↗

arXiv2015

Novel laser machining of optical fibers for long cavities with low birefringence

We present a novel method of machining optical fiber surfaces with a CO${}_2$ laser for use in Fiber-based Fabry-Perot Cavities (FFPCs). Previously FFPCs were prone to large birefringence and limited to relatively short cavity lengths ($\le$ 200 $μ$m). These characteristics hinder their use in some applications such as cavity quantum electrodynamics with trapped ions. We optimized the laser machining process to produce large, uniform surface structures. This enables the cavities to achieve high finesse even for long cavity lengths. By rotating the fibers around their axis during the laser machining process the asymmetry resulting from the laser's transverse mode profile is eliminated. Consequently we are able to fabricate fiber mirrors with a high degree of rotational symmetry, leading to remarkably low birefringence. Through measurements of the cavity finesse over a range of cavity lengths and the polarization dependence of the cavity linewidth, we confirmed the quality of the produced fiber mirrors for use in low-birefringence FFPCs.

physics.optics↗