Searcharxiv⌕ Search

arXiv subjects

Augustine O. Nwajana

Publications and source records attributed to Augustine O. Nwajana.

15 recordsLinked to original sources

Adaptive Hybrid Optical RF Transmission Based on Deep Reinforcement Learning for Ultra-Reliable Low Latency Communication

Ultra Reliable Low-Latency Communication (URLLC) demands submillisecond latency and reliability above 99.999%, which are difficult to guarantee under dynamic wireless and atmospheric conditions. Although free space optical (FSO) links provide high-capacity transmission, their performance degrades under turbulence and fog, while radiofrequency (RF) links offer robustness but limited bandwidth. This paper presents a reinforcement learning-based hybrid optical RF framework that adaptively selects transmission modes to satisfy stringent URLLC requirements. The hybrid decision process is modeled as a Markov Decision Process and optimized using a Deep Q Network (DQN) controller. Extensive simulations under varying attenuation and fading scenarios demonstrate up to 35% latency reduction and 25 to 30 % throughput improvement compared to RF-only and static hybrid schemes, while maintaining reliability above 99.999%. A laboratory-scale testbed operating at 1550 nm and 28 GHz further validates the approach, showing less than 6% deviation between simulated and measured results. The proposed framework demonstrates the practical feasibility of intelligent hybrid transmission for mission-critical next generation wireless networks.

eess.SP↗

Compact Microstrip Triplexer Using Square Open-Loop Resonators with High Isolation for 5G Sub-6 GHz Applications

The rapid proliferation of multi-standard 5G New Radio sub-6 GHz systems have intensified the demand for compact, high-isolation multiplexing components capable of simultaneously routing multiple frequency channels through a single shared antenna port without cross-band interference. This paper presents the design and full-wave electromagnetic simulation of a compact microstrip triplexer operating at 2.2, 2.6, and 3.0 GHz for 5G sub-6 GHz applications. The proposed triplexer employs square open-loop resonators arranged as three independent three-pole Chebyshev bandpass filter channels, yielding nine resonator poles in total. Each channel is synthesised from the standard normalised Chebyshev lowpass prototype. The three channels are integrated at a common input port via a T-junction, with connecting transmission line stubs dimensioned to enforce high inter-channel isolation. Full-wave EM simulation results demonstrate return losses of 21.1 dB, 23.1 dB, and 22.8 dB; insertion losses of 1.08 dB, 1.01 dB, and 0.98 dB; and inter-channel isolations of 45.7 dB, 45.2 dB, and 45.7 dB, respectively. The achieved inter-channel isolation exceeding 45 dB represents a significant improvement over the majority of recently reported microstrip triplexer designs.

eess.SP↗

Six-Pole Dual-band Bandpass Filter for WiMAX Applications

Recent advances in multi-band wireless communication systems have driven the increasing need for dual-band bandpass filters. These types of filters are capable of isolating a small section of the frequency spectrum within a broader spectrum. Over the years, coplanar waveguide, microstrip, slotline, stripline, and other planar transmission line technologies have been widely employed in the design of microwave circuits and systems. This work employs a Folded-Arms Square Open-Loop Resonator (FASOLR) microstrip planar structure, designed and simulated using PathWave Advanced Design System (ADS). A third order (three-pole) single bandpass filter is transformed into a sixth order (six-pole) dual-band bandpass filter. The proposed six-pole dual-band bandpass filter is centred at 2.3 GHz, with a fractional bandwidth of 7% and produces two passbands centred at approximately 2.2 GHz and 2.4 GHz. The design is implemented on a commercially available Rogers RT/Duroid 6010LM substrate with a dielectric constant of 10.7, a loss tangent of 0.0023, a substrate thickness of 1.27 mm, and 35 micro meter copper cladding on both sides. The overall filter component has a compact footprint of 30.56 mm by 20.56 mm. The design is validated through comparison of circuit-level and electromagnetic (EM) simulation results, which show good agreement. The EM simulation responses indicate a return loss better than 10 dB on the first band and better than 19 dB on the second, and an insertion loss better than 1.5 dB, demonstrating its suitability for WiMAX applications.

eess.SP↗

A Triple-Band Bandpass Filter Using Square Open-Loop Resonators

The rapid advancement of multi-band wireless communication systems has driven demand for compact, high-performance multi-band bandpass filters (BPFs) capable of isolating specific frequency bands within a wider spectrum. This paper reviews the current state-of-the-art in multi-band filter design and implementation techniques and presents the design, simulation, and characterisation of a prototype triple-band bandpass filter to validate one of the investigated techniques. A triple-band BPF operating at 2.1 GHz, 2.2 GHz, and 2.3 GHz is designed using Keysight ADS software and implemented on Rogers RT/Duroid 6010LM substrate (dielectric constant = 10.7, loss tangent = 0.0023, thickness = 1.27 mm). The design employs nine square open-loop resonators three per passband with a characteristic impedance of 50 Ω and a fractional bandwidth of 6%. Simulation results demonstrate insertion losses of 0.674 dB, 0.976 dB, and 1.314 dB, and return losses of 16.785 dB, 33.609 dB, and 17.162 dB across the three passbands respectively. The 2.2 GHz centre frequency is achieved with high precision, confirming the effectiveness of the square open-loop resonator transformation technique for compact multi-band filter design in modern wireless communication systems.

eess.SP↗

A Wideband Narrow Beam 1x6 Linear Antenna Array for Automotive Radar and 5G Millimetre-Wave Applications

This paper presents the design and performance analysis of a 1x6 linear microstrip patch antenna array tailored for automotive radar and 5G millimetre-wave (mm-wave) applications. The proposed antenna array comprises six rectangular radiating patches with the primary patch excited using a microstrip feedline, while the remaining patches are interconnected through narrow microstrip lines with a width of 0.1 mm, enabling effective power distribution along the array. Optimal inter-element spacing facilitates constructive and destructive interference, enabling the formation of a narrow beam with enhanced directivity and a wide operational bandwidth. The high-gain radiation characteristics are achieved through the combined effects of the six-element linear configuration and precise impedance matching. Key performance metrics including reflection coefficient, current distribution, and radiation patterns have been analysed. Results demonstrate a reflection coefficient better than 10 dB across the target frequency range and a narrow beamwidth with high directivity, making the array suitable for high-resolution automotive radar and 5G mm-wave communications. Potential applications include vehicle-to-vehicle (V2V) radar sensing, lane change detection, blind spot monitoring at 28 GHz, and high-capacity point-to-point wireless backhaul links. The design offers a promising solution for compact, high-performance beamforming antenna systems in intelligent transportation and next-generation wireless networks.

eess.SP↗

Process Automation Architecture Using RFID for Transparent Voting Systems

This paper presents the development of a process automation architecture leveraging Radio Frequency Identification (RFID) technology for secure, transparent and efficient voting systems. The proposed architecture automates the voting workflow through RFID-enabled voter identification, encrypted vote casting, and secure data transmission. Each eligible voter receives a smart RFID card containing a uniquely encrypted identifier, which is verified using an RC522 reader interfaced with a microcontroller. Upon successful verification, the voter interacts with a touchscreen interface to cast a vote, which is then encrypted using AES-128 and securely stored on a local SD card or transmitted via GSM to a central server. A tamper-proof monitoring mechanism records each session with time-stamped digital signatures, ensuring auditability and data integrity. The architecture is designed to function in both online and offline modes, with an automated batch synchronization mechanism that updates vote records once network connectivity is restored. System testing in simulated environments confirmed 100% voter authentication accuracy, minimized latency (average voting time of 11.5 seconds), and robustness against cloning, double voting, and data interception. The integration of real-time monitoring and secure process control modules enables electoral authorities to automate data logging, detect anomalies, and validate system integrity dynamically. This work demonstrates a scalable, automation-driven solution for voting infrastructure, offering enhanced transparency, resilience, and deployment flexibility, especially in environments where digital transformation of electoral processes is critically needed.

cs.CR↗

Integrating Trustworthy Artificial Intelligence with Energy-Efficient Robotic Arms for Waste Sorting

This paper presents a novel methodology that integrates trustworthy artificial intelligence (AI) with an energy-efficient robotic arm for intelligent waste classification and sorting. By utilizing a convolutional neural network (CNN) enhanced through transfer learning with MobileNetV2, the system accurately classifies waste into six categories: plastic, glass, metal, paper, cardboard, and trash. The model achieved a high training accuracy of 99.8% and a validation accuracy of 80.5%, demonstrating strong learning and generalization. A robotic arm simulator is implemented to perform virtual sorting, calculating the energy cost for each action using Euclidean distance to ensure optimal and efficient movement. The framework incorporates key elements of trustworthy AI, such as transparency, robustness, fairness, and safety, making it a reliable and scalable solution for smart waste management systems in urban settings.

cs.RO↗

Improving 5G/B5G Network Performance with RFID-Enabled Resource Management Systems

In the rapidly evolving landscape of 5G and B5G (beyond 5G) networks, efficient resource optimization is critical to addressing the escalating demands for high-speed, low-latency, and energy efficient communication. This study explores the integration of Radio Frequency Identification (RFID) technology as a novel approach to enhance resource management in 5G/B5G networks. The motivation behind this research lies in overcoming persistent challenges such as spectrum congestion, high latency, and inefficient load balancing, which impede the performance of traditional resource allocation methods. To achieve this, RFID tags were embedded in critical network components, including user devices, base stations, and Internet of Things (IoT) nodes, enabling the collection of real-time data on device status, location, and resource utilization. RFID readers strategically placed across the network continuously captured this data, which was processed by a centralized controller using a custom-designed optimization algorithm. This algorithm dynamically managed key network resources, including spectrum allocation, load balancing, and energy consumption, ensuring efficient operation under varying network conditions. Simulations were conducted to evaluate the performance of the RFID-based model against traditional 4G dynamic resource allocation techniques. The results demonstrated substantial improvements in key performance metrics.

cs.NI↗

Design of a compact low loss 2-way millimetre wave power divider for future communication

In this paper, a rectangular-shaped power divider has been presented operating at 27.9 GHz. The power divider has achieved acceptable results for important parameters such as S11, S12, S21, and S22. The substrate employed for the power divider is Roger 3003 which has a thickness of 1.6 mm. This power divider provides a reflection coefficient of -12.2 dB and an insertion loss of 3.1 dB at 28 GHz. This ka-band T-junction power divider covers 68% of the bandwidth. Dimensions of the ka-band T-junction power divider are 50x80 mm. Due to its dimensions and bandwidth this power divider is more suitable for millimetre wave applications like RADAR, beamforming, and 5G applications.

eess.SY↗

Asymmetric 4.77 Three-Way Unequal Filtering Power Divider/Combiner for Communication Systems Application

This study presents a novel three-way unequal filtering power divider/combiner, addressing challenges in unequal power distribution while incorporating filtering functions in communication systems. Wilkinson power divider (WPD) is the traditional power division approach using quarter-wavelength transmission lines [1]. This type of power divider is popularly used in communication systems due to its good electrical isolation and simple structure. The problem with WPD is that its operation requires the use of an externally connected bandpass filter (BPF) to achieve filtering functionality. This leads to increased footprint and increased loss coefficients in a system. In contrast to the traditional design approach involving a BPF, a matching transmission line, and a Wilkinson power divider as separate components, the proposed integrated filtering power divider (FPD) consolidates all three components into a single device, leading to lower footprint and lower loss coefficient in a system. Circuit modelling and electromagnetic (EM) simulations were conducted to ensure alignment between theoretical and practical results. The design demonstrates effective unequal power division at the three output ports while maintaining very good filtering performance. Results show a return loss better than 15 dB and a minimum insertion loss of 1.2 dB. The overall size of the device is 32.2 x 50.0 mm. This paper contributes to advancements in power divider design by addressing unequal power division challenges and integrating filtering functions. The findings offer a foundation for future developments in advanced power divider/combiner systems, with insights into potential challenges and areas for further improvements.

eess.SY↗

Detecting and Preventing Data Poisoning Attacks on AI Models

This paper investigates the critical issue of data poisoning attacks on AI models, a growing concern in the ever-evolving landscape of artificial intelligence and cybersecurity. As advanced technology systems become increasingly prevalent across various sectors, the need for robust defence mechanisms against adversarial attacks becomes paramount. The study aims to develop and evaluate novel techniques for detecting and preventing data poisoning attacks, focusing on both theoretical frameworks and practical applications. Through a comprehensive literature review, experimental validation using the CIFAR-10 and Insurance Claims datasets, and the development of innovative algorithms, this paper seeks to enhance the resilience of AI models against malicious data manipulation. The study explores various methods, including anomaly detection, robust optimization strategies, and ensemble learning, to identify and mitigate the effects of poisoned data during model training. Experimental results indicate that data poisoning significantly degrades model performance, reducing classification accuracy by up to 27% in image recognition tasks (CIFAR-10) and 22% in fraud detection models (Insurance Claims dataset). The proposed defence mechanisms, including statistical anomaly detection and adversarial training, successfully mitigated poisoning effects, improving model robustness and restoring accuracy levels by an average of 15-20%. The findings further demonstrate that ensemble learning techniques provide an additional layer of resilience, reducing false positives and false negatives caused by adversarial data injections.

cs.CR↗

Energy Consumption of Robotic Arm with the Local Reduction Method

Energy consumption in robotic arms is a significant concern in industrial automation due to rising operational costs and environmental impact. This study investigates the use of a local reduction method to optimize energy efficiency in robotic systems without compromising performance. The approach refines movement parameters, minimizing energy use while maintaining precision and operational reliability. A three-joint robotic arm model was tested using simulation over a 30-second period for various tasks, including pick-and-place and trajectory-following operations. The results revealed that the local reduction method reduced energy consumption by up to 25% compared to traditional techniques such as Model Predictive Control (MPC) and Genetic Algorithms (GA). Unlike MPC, which requires significant computational resources, and GA, which has slow convergence rates, the local reduction method demonstrated superior adaptability and computational efficiency in real-time applications. The study highlights the scalability and simplicity of the local reduction approach, making it an attractive option for industries seeking sustainable and cost-effective solutions. Additionally, this method can integrate seamlessly with emerging technologies like Artificial Intelligence (AI), further enhancing its application in dynamic and complex environments. This research underscores the potential of the local reduction method as a practical tool for optimizing robotic arm operations, reducing energy demands, and contributing to sustainability in industrial automation. Future work will focus on extending the approach to real-world scenarios and incorporating AI-driven adjustments for more dynamic adaptability.

cs.RO↗

Design of a Rectangular Linear Microstrip Patch Antenna Array for 5G Communication

This paper presents the design and characterization of a rectangular microstrip patch antenna array optimized for operation within the Ku-band frequency range. The antenna array is impedance-matched to 50 Ohms and utilizes a microstrip line feeding mechanism for excitation. The design maintains compact dimensions, with the overall antenna occupying an area of 29.5x7 mm. The antenna structure is modelled on an R03003 substrate material, featuring a dielectric constant of 3, a low-loss tangent of 0.0009, and a thickness of 1.574 mm. The substrate is backed by a conducting ground plane, and the array consists of six radiating patch elements positioned on top. Evaluation of the designed antenna array reveals a resonant frequency of 18GHz, with a -10 dB impedance bandwidth extending over 700MHz. The antenna demonstrates a high gain of 7.51dBi, making it well-suited for applications in 5G and future communication systems. Its compact form factor, cost-effectiveness, and broad impedance and radiation coverage further underscore its potential in these domains.

eess.SY↗

Dual-band bandpass filter derived from the transformation of a single-band bandpass filter

The recent proliferation of personal wireless communication devices is driving the need for multi-band frequency selective components including multiplexers and dual-band filters. This paper presents a simple technique for transforming a single-band bandpass filter (BPF) into a dual-band BPF. A second order (two-pole) single-band bandpass filter was chosen for this research, giving rise to a fourth order (four-pole) dual-band bandpass filter after the proposed filter transformation. Both filters were then implemented using the compact U-shaped microstrip resonator for improved device miniaturization. The proposed work features a centre frequency of 1.4 GHz for the single-band bandpass filter, with a span of 3.4% fractional bandwidth. The dual-band bandpass filter operates at 1.35 and 1.45 GHz. The design implementation employs the commercially available Rogers RT/Duroid 6010LM substrate, having a dissipation factor of 0.0023, dielectric constant of 10.7, diel thickness (h) of 1.27 mm, and top/bottom cladding of 35 microns. The results reported for the theoretical and practical designs show good agreement and improved performance when compared to similar research works in literature. The practical responses of the prototype dual-band BPF indicate a good return loss of better than 18 dB across both bands, and an insertion loss of better than 0.1 dB.

eess.SY↗

3-way equal filtering power divider using compact folded-arms square open-Loop resonator

Microstrip three-way (that is, 4.8 dB) integrated filtering power divider (FPD) is presented in this paper. The proposed FPD evenly distributes an input power signal into three equal output signals. The design incorporates balanced signal power division, and filtering technology for the removal of unwanted frequency elements and aimed at enhancing signal quality and efficiency in the radiofrequency (RF) front-end of communication systems. Microstrip folded-arms square open-loop resonator (FASOLR) is employed in the design implementation to achieve compact size. The proposed FPD features a 2.6 GHz centre frequency, with a 0.03 fractional bandwidth. The implementation is carried out on Rogers RT/Duroid 6010LM substrate with a dielectric constant of 10.7, a thickness of 1.27 mm and a loss tangent of 0.0023. The good agreement between the theoretical and practical results verifies the effectiveness of the FPD in delivering equal power outputs at the three output ports, and at the same time filtering out unwanted frequencies. The practical results of the prototype FPD indicate a good return loss of better than 15.5 dB and an insertion loss of better than 4.77+0.34 dB. The design prototype achieved compact size of 0.31 λg x 0.18 λg. λg is the guided wavelength for the microstrip line impedance at the centre frequency of the 3-way equal filtering power divider.

eess.SY↗