arXiv subjects

Aurelien Chalumeau

Publications and source records attributed to Aurelien Chalumeau.

6 recordsLinked to original sources

arXiv2026

JUG: JAX-based Unified pulsar timinG

We present JUG (JAX-based Unified pulsar timinG), a JAX-based, fully independent pulsar timing package emphasising speed and ease of use, designed to confidently handle the increasingly large and complex pulsar timing array datasets that are being created in the pulsar timing field. JUG implements the entire pulsar timing pipeline itself, from data handling and clock corrections through to the timing model and fitting, without relying on other timing software. It enables Pythonic programming at the speed of compiled code, is GPU-capable, and can be operated via a Python API or an interactive GUI. A user of JUG can interactively explore data, fit timing models with complex stochastic noise, model deterministic signals such as continuous gravitational waves, and obtain accurate point estimates of the parameters of the stochastic processes present, thereby bridging frequentist timing and Bayesian noise analysis. JUG is faster than PINT by more than fifty times and is comparably fast to Tempo2, can handle millions of arrival times, agrees with PINT at the picosecond level, and can reliably recover known timing model and noise parameter values. In this paper we describe its design, performance, and validation, and demonstrate its advantages for pulsar timing data analysis.

astro-ph.IM↗

arXiv2025

The SKAO Pulsar Timing Array

Pulsar timing arrays (PTAs) are ensembles of millisecond pulsars observed for years to decades. The primary goal of PTAs is to study gravitational-wave astronomy at nanohertz frequencies, with secondary goals of undertaking other fundamental tests of physics and astronomy. Recently, compelling evidence has emerged in established PTA experiments for the presence of a gravitational-wave background. To accelerate a confident detection of such a signal and then study gravitational-wave emitting sources, it is necessary to observe a larger number of millisecond pulsars to greater timing precision. The SKAO telescopes, which will be a factor of three to four greater in sensitivity compared to any other southern hemisphere facility, are poised to make such an impact. In this chapter, we motivate an SKAO pulsar timing array (SKAO PTA) experiment. We discuss the classes of gravitational waves present in PTA observations and how an SKAO PTA can detect and study them. We then describe the sources that can produce these signals. We discuss the astrophysical noise sources that must be mitigated to undertake the most sensitive searches. We then describe a realistic PTA experiment implemented with the SKA and place it in context alongside other PTA experiments likely ongoing in the 2030s. We describe the techniques necessary to search for gravitational waves in the SKAO PTA and motivate how very long baseline interferometry can improve the sensitivity of an SKAO PTA. The SKAO PTA will provide a view of the Universe complementary to those of the other large facilities of the 2030s.

astro-ph.HE↗

arXiv2025

Dissecting the nanoHz gravitational wave sky: frequency-correlated anisotropy induced by eccentric supermassive black hole binaries

Revealing the nature of the nanoHz gravitational wave (GW) signal recently reported by Pulsar Timing Arrays (PTAs) collaborations around the world is the next goal of low-frequency GW astronomy. The signal likely originates from the incoherent superposition of GWs emitted by a cosmological population of supermassive black hole binaries (SMBHBs). Those binaries can be highly eccentric and/or strongly coupled to their nuclear environment, resulting in an attenuation of the overall GW signal at low frequencies. In this paper, we propose to use the correlation properties of the distributed GW power in the sky across the frequency spectrum as a smoking gun for eccentric SMBHBs thus allowing to break the spectral degeneracy between eccentricity and environmental effect. The simple underlying idea is that, contrary to circular binaries, eccentric ones emit a broadband spectrum thus resulting in similar sky maps at different frequencies. We first demonstrate the applicability of this simple concept on sky maps constructed directly from the theoretical sky distribution of the GWB power induced by realistic populations of SMBHBs. We then demonstrate the viability of this analysis on simulated SKA-like PTA data. By statistically comparing sky maps reconstructed from hundreds injected circular and highly eccentric SMBHB populations, we find that eccentricity can be detected at $3\sigma$ in more than $50\%$ of cases.

astro-ph.GA↗

arXiv2024

Impact of the observation frequency coverage on the significance of a gravitational wave background detection in PTA data

Pulsar Timing Array (PTA) collaborations gather high-precision timing measurements of pulsars with the aim of detecting gravitational wave (GW) signals. A major challenge lies in the identification and characterization of the different sources of noise that may hamper their sensitivity to GWs. The presence of time-correlated noise that resembles the target signal might give rise to degeneracies that can directly impact the detection statistics. In this work, we focus on the covariance that exists between a "chromatic" dispersion measure (DM) noise and an "achromatic" stochastic gravitational wave background (GWB). "Chromatic" associated to the DM noise means that its amplitude depends on the frequency of the incoming pulsar photons measured by the radio-telescope. Several frequency channels are then required to accurately characterise its chromatic features and when the coverage of incoming frequency is poor, it becomes impossible to disentangle chromatic and achromatic noise contributions. In this paper, we explore this situation by injecting realistic GWB into 100 realizations of two mock versions of the second data release (DR2) of the European PTA (EPTA), characterized by different frequency coverage. The first dataset is a faithful copy of DR2, in which the first half of the data is dominated by only one frequency channel of observation; the second one is identical except for a more homogeneous frequency coverage across the full dataset. We show that for 91% of the injections, a better frequency coverage leads to an improved statistical significance (~1.3dex higher log Bayes factor on average) of the GWB and a better characterization of its properties. We propose a metric to quantify the degeneracy between DM and GWB parameters and show that it is correlated with a loss of significance for the recovered GWB and an increase in the GWB bias towards a higher and flatter spectral shape.

astro-ph.HE↗

arXiv2024

Separating deterministic and stochastic gravitational wave signals in realistic pulsar timing array datasets

Recent observations by pulsar timing arrays indicate the presence of gravitational wave signals, likely from supermassive black hole binaries. These binaries can produce two types of signals: a stochastic gravitational wave background (GWB) or deterministic continuous gravitational waves (CGW). Correctly separating these signals is essential for accurate signal recovery and interpretation. This paper investigates the interaction between GWB and CGW signals within current analysis pipelines, focusing on misinterpretations and biases in parameter estimation when these signals are analyzed separately or together. We conducted several simulations based on the European PTA 24.8-year dataset. First, we injected either a GWB or a CGW. We compared parameter estimation using different search models, including Earth term only, combined Earth and pulsar term CGW templates, and correlated (HD) or uncorrelated (CURN) power law GWB templates. Our findings show that, when searched independently, the GWB and CGW signals can be misinterpreted as each other, and only a combined search can recover the true signal present. For datasets containing both a GWB and a CGW, failure to account for the CGW biases the recovery of the GWB. However, a combined search allows for the recovery of both GWB and CGW parameters without significant bias. Care must be taken with the method used to perform combined searches on these multi-component datasets, as the CGW pulsar term can be misinterpreted as a CURN. This can be avoided by direct searches for an HD correlated GWB plus a CGW. Our study underscores the importance of combined searches to ensure unbiased recovery of GWB parameters in the presence of strong CGWs, which is crucial for interpreting signals recently found in PTA data and represents a step toward a robust framework for disentangling stochastic and deterministic GW signals in future, more sensitive datasets.

astro-ph.HE↗

arXiv2024

The NANOGrav 15 yr Data Set: Chromatic Gaussian Process Noise Models for Six Pulsars

Pulsar timing arrays (PTAs) are designed to detect low-frequency gravitational waves (GWs). GWs induce achromatic signals in PTA data, meaning that the timing delays do not depend on radio-frequency. However, pulse arrival times are also affected by radio-frequency dependent "chromatic" noise from sources such as dispersion measure (DM) and scattering delay variations. Furthermore, the characterization of GW signals may be influenced by the choice of chromatic noise model for each pulsar. To better understand this effect, we assess if and how different chromatic noise models affect achromatic noise properties in each pulsar. The models we compare include existing DM models used by NANOGrav and noise models used for the European PTA Data Release 2 (EPTA DR2). We perform this comparison using a subsample of six pulsars from the NANOGrav 15 yr data set, selecting the same six pulsars as from the EPTA DR2 six-pulsar dataset. We find that the choice of chromatic noise model noticeably affects the achromatic noise properties of several pulsars. This is most dramatic for PSR J1713+0747, where the amplitude of its achromatic red noise lowers from $\log_{10}A_{\text{RN}} = -14.1^{+0.1}_{-0.1}$ to $-14.7^{+0.3}_{-0.5}$, and the spectral index broadens from $γ_{\text{RN}} = 2.6^{+0.5}_{-0.4}$ to $γ_{\text{RN}} = 3.5^{+1.2}_{-0.9}$. We also compare each pulsar's noise properties with those inferred from the EPTA DR2, using the same models. From the discrepancies, we identify potential areas where the noise models could be improved. These results highlight the potential for custom chromatic noise models to improve PTA sensitivity to GWs.

astro-ph.HE↗