arXiv subjects

Ayami Hiramoto

Publications and source records attributed to Ayami Hiramoto.

6 recordsLinked to original sources

arXiv2026

A cryogenic buffer gas beam source with in-situ ablation target replacement

The design and performance of a cryogenic buffer gas beam (CBGB) source with a load-lock system is presented. The ACME III electron electric dipole moment (eEDM) search experiment uses this source to produce a beam of cold, slow thorium monoxide (ThO) molecules. A key feature of the apparatus is its capability to replace ablation targets without interrupting vacuum or cryogenic conditions, increasing the average signal in the eEDM search. The source produces approximately $1.3 \times 10^{11}$ ground-state ThO molecules per pulse, with a rotational temperature of $4.8$ K, molecular beam solid angle of $0.31$ sr, and forward velocity of $200$ m/s. These parameters match the performance of traditional sources that require time-consuming thermal cycles for target replacement. A long-term yield improvement of about 40% is achieved when the load-lock system is used to replace targets biweekly.

physics.atom-ph↗

arXiv2022

High-resolution spectroscopy of buffer-gas-cooled phthalocyanine

For over five decades, studies in the field of chemical physics and physical chemistry have primarily aimed to understand the quantum properties of molecules. However, high-resolution rovibronic spectroscopy has been limited to relatively small and simple systems because translationally and rotationally cold samples have not been prepared in sufficiently large quantities for large and complex systems. In this study, we present high-resolution rovibronic spectroscopy results for large gas-phase molecules, namely, free-base phthalocyanine (FBPc). The findings suggest that buffer-gas cooling may be effective for large molecules introduced via laser ablation. High-resolution electronic spectroscopy, combined with other experimental and theoretical studies, will be useful in understanding the quantum properties of molecules. These findings also serve as a guide for quantum chemical calculations of large molecules.

physics.chem-ph↗

arXiv2022

Measurement of Doppler effects in cryogenic buffer-gas cell

Buffer-gas cooling is a universal cooling technique for molecules and used for various purposes. One of its applications is using molecules inside a buffer-gas cell for low-temperature spectroscopy. Although a high-intensity signal is expected in the cell, complex molecular dynamics is a drawback for precise spectroscopy. In this study, we performed high-resolution absorption spectroscopy of low-J transitions in the $\tilde{A}^2Π(0,0,0)-\tilde{X}^2Σ^+(0,0,0)$ band of calcium monohydroxide (CaOH). CaOH molecules were produced by laser ablation in a copper cell and cooled to $\sim$5\,K using helium buffer gas. We probed the Doppler effects in a buffer-gas cell by injecting counter-propagating lasers inside the cell. The time evolutions of the Doppler width and shift were simulated using a dedicated Monte Carlo simulation and compared with data.

physics.chem-ph↗

arXiv2022

High-sensitivity low-noise photodetector using large-area silicon photomultiplier

The application of silicon photomultiplier (SiPM) technology for weak-light detection at a single photon level has expanded thanks to its better photon detection efficiency in comparison to a conventional photomultiplier tube (PMT). SiPMs with large detection area have recently become commercially available, enabling applications where the photon flux is low both temporarily and spatially. On the other hand, several drawbacks exist in the usage of SiPMs such as a higher dark count rate, many readout channels, slow response time, and optical crosstalk; therefore, users need to carefully consider the trade-offs. This work presents a SiPM-embedded compact large-area photon detection module. Various techniques are adopted to overcome the disadvantages of SiPMs so that it can be generally utilized as an upgrade from a PMT. A simple cooling component and recently developed optical crosstalk suppression method are adopted to reduce the noise which is more serious for larger-area SiPMs. A dedicated readout circuit increases the response frequency and reduces the number of readout channels. We favorably compare this design with a conventional PMT and obtain both higher photon detection efficiency and larger-area acceptance.

physics.ins-det↗

arXiv2022

Low-$J$ transitions in $\tilde{A}^2Π(0,0,0)-\tilde{X}^2Σ^+(0,0,0)$ band of buffer-gas-cooled CaOH

Calcium monohydroxide radical (CaOH) is receiving an increasing amount of attention from the astrophysics community as it is expected to be present in the atmospheres of hot rocky super-Earth exoplanets as well as interstellar and circumstellar environments. Here, we report the high-resolution laboratory absorption spectroscopy on low-$J$ transitions in $\tilde{A}^2Π(0,0,0)-\tilde{X}^2Σ^+(0,0,0)$ band of buffer-gas-cooled CaOH. In total, 40 transitions out of the low-$J$ states were assigned, including 27 transitions which have not been reported in previous literature. The determined rotational constants for both ground and excited states are in excellent agreement with previous literature, and the measurement uncertainty for the absolute transition frequencies was improved by more than a factor of three. This will aid future interstellar, circumstellar, and atmospheric identifications of CaOH. The buffer-gas-cooling method employed here is a particularly powerful method to probe low-$J$ transitions and is easily applicable to other astrophysical molecules.

astro-ph.IM↗

arXiv2022

Design and performance of a scintillation tracker for track matching in nuclear-emulsion-based neutrino interaction measurement

Precise measurement of neutrino-nucleus interactions with an accelerator neutrino beam is highly important for current and future neutrino oscillation experiments. To measure muon-neutrino charged-current interactions with nuclear-emulsion-based hybrid detector, muon track matching among the detectors are essential. We describe the design and performance of a newly developed scintillation tracker for the muon track matching in the neutrino-nucleus interaction measurement with nuclear emulsion detectors. The muon tracks are reconstructed using the scintillation tracker and another detector called Baby MIND, then, they are matched with the tracks in nuclear emulsion detectors. The scintillation tracker consists of four layers of horizontally and vertically aligned scintillator bars, covering an area of $1\,\mathrm{m} \times 1\,\mathrm{m}$. In the layer, 24 mm-wide plastic scintillator bars are specially arranged with deliberate gaps between each other. By recognizing the hit pattern of the four layers, a precise positional resolution of 2.5 mm is achieved while keeping the number of readout channels as small as 256. The efficiency of the track matching is evaluated to be more than 97% for forward-going muons, and the positional and angular resolutions of the scintillation tracker are 2.5 mm and 20-40 mrad respectively. The results demonstrate the usefulness of the design of the scintillation tracker for the muon track matching in the nuclear-emulsion-based neutrino-nucleus interaction measurements.

physics.ins-det↗