arXiv subjects

Aydin Sezgin

Publications and source records attributed to Aydin Sezgin.

At least 91 records · Page 5Linked to original sources

arXiv2022

Full-Duplex meets Reconfigurable Surfaces: RIS-assisted SIC for Full-Duplex Radios

Reconfigurable intelligent surfaces (RIS) are a key enabler of various new applications in 6G smart radio environments. By utilizing an RIS prototype system, this paper aims to enhance self-interference (SI) cancellation for in-band full-duplex (FD) communication systems. SI suppression is a crucial requirement for FD communication as the SI severely limits the performance of a node by shadowing the received signal from a distant node with its own transmit signal. To this end, we propose to assist SI cancellation by exploiting an RIS to form a suitable cancellation signal in the analog domain. Building upon a 256-element RIS prototype, we present results of RIS-assisted SI cancellation from a practical testbed. Given an initial analog isolation of 44 dB provided by the antenna design, we are able to cancel the leaked signal by an additional 59 dB in the narrowband case, resulting in an overall SI suppression of 103 dB without additional digital cancellation. The presented case study shows promising performance to build an FD communication system on this foundation.

eess.SP↗

arXiv2022

Defect Detection by MIMO Wireless Sensing based on Weighted Low-Rank plus Sparse Recovery

We present a compressive sensing based defect detection by multiple input multiple output (MIMO) wireless radar. Here, defects are inside a layered material structure, therefore, due to reflections from the surface of the layered material structure the defect detection is challenging. By utilizing a low-rank nature of the reflections of the layered material structure and sparse nature of the defects, we propose a method based on rank minimization and sparse recovery. To improve the accuracy in the recovery of low-rank and sparse components, we propose a non-convex approach based on the iteratively reweighted nuclear norm and iteratively reweighted $\ell_1-$norm algorithm. Our numerical results show that the proposed method is able to demix and recover the signalling responses of the defects and layered structure successfully from substantially reduced number of observations. Further, the proposed approach outperforms the state-of-the-art clutter reduction approaches

eess.SP↗

arXiv2022

Energy Efficiency in Rate-Splitting Multiple Access with Mixed Criticality

Future sixth generation (6G) wireless communication networks face the need to similarly meet unprecedented quality of service (QoS) demands while also providing a larger energy efficiency (EE) to minimize their carbon footprint. Moreover, due to the diverseness of network participants, mixed criticality QoS levels are assigned to the users of such networks. In this work, with a focus on a cloud-radio access network (C-RAN), the fulfillment of desired QoS and minimized transmit power use is optimized jointly within a rate-splitting paradigm. Thereby, the optimization problem is non-convex. Hence, a low-complexity algorithm is proposed based on fractional programming. Numerical results validate that there is a trade-off between the QoS fulfillment and power minimization. Moreover, the energy efficiency of the proposed rate-splitting algorithm is larger than in comparative schemes, especially with mixed criticality.

cs.IT↗

arXiv2021

Deep Unfolding of Iteratively Reweighted ADMM for Wireless RF Sensing

We address the detection of material defects, which are inside a layered material structure using compressive sensing based multiple-input and multiple-output (MIMO) wireless radar. Here, the strong clutter due to the reflection of the layered structure's surface often makes the detection of the defects challenging. Thus, sophisticated signal separation methods are required for improved defect detection. In many scenarios, the number of defects that we are interested in is limited and the signaling response of the layered structure can be modeled as a low-rank structure. Therefore, we propose joint rank and sparsity minimization for defect detection. In particular, we propose a non-convex approach based on the iteratively reweighted nuclear and $\ell_1-$norm (a double-reweighted approach) to obtain a higher accuracy compared to the conventional nuclear norm and $\ell_1-$norm minimization. To this end, an iterative algorithm is designed to estimate the low-rank and sparse contributions. Further, we propose deep learning to learn the parameters of the algorithm (i.e., algorithm unfolding) to improve the accuracy and the speed of convergence of the algorithm. Our numerical results show that the proposed approach outperforms the conventional approaches in terms of mean square errors of the recovered low-rank and sparse components and the speed of convergence.

eess.SP↗

arXiv2021

Distributed Resource Management in Downlink Cache-Enabled Multi-Cloud Radio Access Networks

In light of the premises of beyond fifth generation (B5G) networks, the need for better exploiting the capabilities of cloud-enabled networks arises, so as to cope with the large-scale interference resulting from the massive increase of data-hungry systems. A compound of several clouds, jointly managing inter-cloud and intra-cloud interference, constitutes a practical solution to account for the requirements of B5G networks. This paper considers a multi-cloud radio access network model (MC-RAN), where each cloud is connected to a distinct set of base stations (BSs) via limited capacity fronthaul links. The BSs are equipped with local cache storage and baseband processing capabilities, as a means to alleviate the fronthaul congestion problem. The paper then investigates the problem of jointly assigning users to clouds and determining their beamforming vectors so as to maximize the network-wide energy efficiency (EE) subject to fronthaul capacity and transmit power constraints. This paper solves such a mixed discrete-continuous, non-convex optimization problem using fractional programming (FP) and successive inner-convex approximation (SICA) techniques to deal with the non-convexity of the continuous part of the problem, and $l_0$-norm approximation to account for the binary association part. A highlight of the proposed algorithm is its capability of being implemented in a distributed fashion across the network's multiple clouds through a reasonable amount of information exchange. The numerical simulations illustrate the pronounced role the proposed algorithm plays in alleviating the interference of large-scale MC-RANs, especially in dense networks.

cs.IT↗

arXiv2021

On the Impact of Oscillator Phase Noise in an IRS-assisted MISO TDD System

In this work, we study the impact of the multiplicative phase noise in an IRS-assisted system. We consider an IRS-assisted system with multiplicative phase noise both at the BS and user. A novel channel estimation algorithm is proposed considering the phase noise. By utilizing the proposed channel estimates we investigate the system performance in the downlink, more specifically, we derive the ergodic capacity in closed form. Simulation results verify the correctness of the closed-form expression. We observe that the system becomes more robust against the phase noise as the number of reflective elements increases. Moreover, the influence of the additive channel noise in uplink vanishes as the number of reflecting elements grows asymptotically large.

eess.SP↗

arXiv2021

Keys from the Sky: A First Exploration of Physical-Layer Security Using Satellite Links

In this paper, we investigate physical-layer security (PLS) methods for proximity-based group-key establishment and proof of location. Fields of application include secure car-to-car communication, privacy-preserving and secure distance evidence for healthcare or location-based feature activation. Existing technologies do not solve the problem satisfactorily, due to communication restrictions, e.g., ultra-wide band (UWB) based time of flight measurements, or trusted hardware, e.g., using global navigation satellite system (GNSS) positioning data. We introduce PLS as a solution candidate. It is information theoretically secure, which also means post-quantum resistant, and has the potential to run on resource constrained devices with low latency. Furthermore, we use wireless channel properties of satellite-to-Earth links, demonstrate the first feasibility study using off-the-shelf hardware testbeds and present first evaluation results and future directions for research.

cs.CR↗

arXiv2021

Rate-Splitting Multiple Access in Cache-Aided Cloud-Radio Access Networks

Rate-splitting multiple access (RSMA) has been recognized as a promising physical layer strategy for 6G. Motivated by ever increasing popularity of cache-enabled content delivery in wireless communications, this paper proposes an innovative multigroup multicast transmission scheme based on RSMA for cache-aided cloud-radio access networks (C-RAN). Our proposed scheme not only exploits the properties of content-centric communications and local caching at the base stations (BSs), but also incorporates RSMA to better manage interference in multigroup multicast transmission with statistical channel state information (CSI) known at the central processor (CP) and the BSs. At the RSMA-enabled cloud CP, the message of each multicast group is split into a private and a common part with the former private part being decoded by all users in the respective group and the latter common part being decoded by multiple users from other multicast groups. Common message decoding is done for the purpose of mitigating the interference. In this work, we jointly optimize the clustering of BSs and the precoding with the aim of maximizing the minimum rate among all multicast groups to guarantee fairness serving all groups. The problem is a mixed-integer non-linear stochastic program (MINLSP), which is solved by a practical algorithm we proposed including a heuristic clustering algorithm for assigning a set of BSs to serve each user followed by an efficient iterative algorithm that combines the sample average approximation (SAA) and weighted minimum mean square error (WMMSE) to solve the stochastic non-convex sub-problem of precoder design. Numerical results show the explicit max-min rate gain of our proposed transmission scheme compared to the state-of-the-art trivial interference processing methods. Therefore, we conclude that RSMA is a promising technique for cache-aided C-RAN.

cs.IT↗

arXiv2021

Synergistic Benefits in IRS- and RS-enabled C-RAN with Energy-Efficient Clustering

The potential of intelligent reflecting surfaces (IRSs) is investigated as a promising technique for enhancing the energy efficiency of wireless networks. Specifically, the IRS enables passive beamsteering by employing many low-cost individually controllable reflect elements. The resulting change of the channel state, however, increases both, signal quality and interference at the users. To counteract this negative side effect, we employ rate splitting (RS), which inherently is able to mitigate the impact of interference. We facilitate practical implementation by considering a Cloud Radio Access Network (C-RAN) at the cost of finite fronthaul-link capacities, which necessitate the allocation of sensible user-centric clusters to ensure energy-efficient transmissions. Dynamic methods for RS and the user clustering are proposed to account for the interdependencies of the individual techniques. Numerical results show that the dynamic RS method establishes synergistic benefits between RS and the IRS. Additionally, the dynamic user clustering and the IRS cooperate synergistically, with a gain of up to 88% when compared to the static scheme. Interestingly, with an increasing fronthaul capacity, the gain of the dynamic user clustering decreases, while the gain of the dynamic RS method increases. Around the resulting intersection, both methods affect the system concurrently, improving the energy efficiency drastically.

eess.SP↗

arXiv2021

Kalman filter based MIMO CSI phase recovery for COTS WiFi devices

Recently channel state information (CSI) measurements from commercial multi input multi output (MIMO) WiFi systems have been ubiquitously used for different wireless sensing applications. However, the phase of the CSI realizations is usually distorted severely by phase errors due to the hardware impairments, which significantly reduce the sensing performance. In this paper, we directly utilize the modeling of the phase distortions caused by the hardware impairments and propose an adaptive CSI estimation approach based on Kalman filter (KF) with maximum a posteriori (MAP) estimation that considers the CSI from the previous time. The performance of the proposed algorithm is compared against the Cramer Rao lower bound (CRLB). Simulation and experimental results demonstrate that our approach can track the channel variations while eliminating the phase errors accurately.

eess.SP↗

arXiv2021

Deep Learning for DOA Estimation in MIMO Radar Systems via Emulation of Large Antenna Arrays

We present a MUSIC-based Direction of Arrival (DOA) estimation strategy using small antenna arrays, via employing deep learning for reconstructing the signals of a virtual large antenna array. Not only does the proposed strategy deliver significantly better performance than simply plugging the incoming signals into MUSIC, but surprisingly, the performance is also better than directly using an actual large antenna array with MUSIC for high angle ranges and low test SNR values. We further analyze the best choice for the training SNR as a function of the test SNR, and observe dramatic changes in the behavior of this function for different angle ranges.

eess.SP↗

arXiv2021

A Reinforcement Learning based approach for Multi-target Detection in Massive MIMO radar

This paper considers the problem of multi-target detection for massive multiple input multiple output (MMIMO) cognitive radar (CR). The concept of CR is based on the perception-action cycle that senses and intelligently adapts to the dynamic environment in order to optimally satisfy a specific mission. However, this usually requires a priori knowledge of the environmental model, which is not available in most cases. We propose a reinforcement learning (RL) based algorithm for cognitive multi-target detection in the presence of unknown disturbance statistics. The radar acts as an agent that continuously senses the unknown environment (i.e., targets and disturbance) and consequently optimizes transmitted waveforms in order to maximize the probability of detection ($P_\mathsf{D}$) by focusing the energy in specific range-angle cells (i.e., beamforming). Furthermore, we propose a solution to the beamforming optimization problem with less complexity than the existing methods. Numerical simulations are performed to assess the performance of the proposed RL-based algorithm in both stationary and dynamic environments. The RL based beamforming is compared to the conventional omnidirectional approach with equal power allocation and to adaptive beamforming with no RL. As highlighted by the proposed numerical results, our RL-based beamformer outperforms both approaches in terms of target detection performance. The performance improvement is even particularly remarkable under environmentally harsh conditions such as low SNR, heavy-tailed disturbance and rapidly changing scenarios.

eess.SP↗

arXiv2021

Spoofing attack detection in dynamic channels with imperfect CSI

Recently, channel state information (CSI) at the physical-layer has been utilized to detect spoofing attacks in wireless communications. However, due to hardware impairments and communication noise, the CSI cannot be estimated accurately, which significantly degrades the attack detection performance. Besides, the reliability of CSI based detection schemes is challenged by time-varying scenarios. To address these issues, we propose an adaptive Kalman based detection scheme. By utilizing the knowledge of the predicted channel we eliminate the channel estimation error, especially the random phase error which occurs due to the lack of synchronization between transmitter and receiver. Furthermore, we define a Kalman residual based test statistic for attack detection. Simulation results show that our proposed scheme makes the detection more robust at low signal-to-noise ratio (SNR) and in dynamic scenarios.

eess.SP↗

arXiv2020

Localization Attack by Precoder Feedback Overhearing in 5G Networks and Countermeasures

In fifth-generation (5G) cellular networks, users feed back to the base station the index of the precoder (from a codebook) to be used for downlink transmission. The precoder is strongly related to the user channel and in turn to the user position within the cell. We propose a method by which an external attacker determines the user position by passively overhearing this unencrypted layer-2 feedback signal. The attacker first builds a map of fed back precoder indices in the cell. Then, by overhearing the precoder index fed back by the victim user, the attacker finds its position on the map. We focus on the type-I single-panel codebook, which today is the only mandatory solution in the 3GPP standard. We analyze the attack and assess the obtained localization accuracy against various parameters. We analyze the localization error of a simplified precoder feedback model and describe its asymptotic localization precision. We also propose a mitigation against our attack, wherein the user randomly selects the precoder among those providing the highest rate. Simulations confirm that the attack can achieve a high localization accuracy, which is significantly reduced when the mitigation solution is adopted, at the cost of a negligible rate degradation.

cs.IT↗

arXiv2020

On Synergistic Benefits of Rate Splitting in IRS-assisted Cloud Radio Access Networks

The concept of intelligent reflecting surfaces (IRSs) is considered as a promising technology for increasing the efficiency of mobile wireless networks. This is achieved by employing a vast amount of low-cost individually adjustable passive reflect elements, that are able to apply changes to the reflected signal. To this end, the IRS makes the environment realtime controllable and can be adjusted to significantly increase the received signal quality at the users by passive beamsteering. However, the changes to the reflected signals have an effect on all users near the IRS, which makes it impossible to optimize the changes to positively influence every transmission, affected by the reflections. This results in some users not only experiencing better signal quality, but also an increase in received interference. To mitigate this negative side effect of the IRS, this paper utilizes the rate splitting (RS) technique, which enables the mitigation of interference within the network in such a way that it also mitigates the increased interference caused by the IRS. To investigate the effects on the overall power savings, that can be achieved by combining both techniques, we minimize the required transmit power, needed to satisfy per-user quality-of-service (QoS) constraints. Numerical results show the improved power savings, that can be gained by utilizing the IRS and the RS technique simultaneously. In fact, the concurrent use of both techniques yields power savings, which are beyond the cumulative power savings of using each technique separately.

cs.NI↗

arXiv2020

Rate Splitting Multiple Access in C-RAN: A Scalable and Robust Design

Cloud radio access networks (C-RAN) enable a network platform for beyond the fifth generation of communication networks (B5G), which incorporates the advances in cloud computing technologies to modern radio access networks. Recently, rate splitting multiple access (RSMA), relying on multi-antenna rate-splitting (RS) at the transmitter and successive interference cancellation (SIC) at the receivers, has been shown to manage the interference in multi-antenna communication networks efficiently. This paper considers applying RSMA in C-RAN. We address the practical challenge of a transmitter that only knows the statistical channel state (CSI) information of the users. To this end, the paper investigates the problem of stochastic coordinated beamforming (SCB) optimization to maximize the ergodic sum-rate (ESR) in the network. Furthermore, we propose a scalable and robust RS scheme where the number of the common streams to be decoded at each user scales linearly with the number of users, and the common stream selection only depends on the statistical CSI. The setup leads to a challenging stochastic and non-convex optimization problem. A sample average approximation (SAA) and weighted minimum mean square error (WMMSE) based algorithm is adopted to tackle the intractable stochastic non-convex optimization and guarantee convergence to a stationary point asymptotically. The numerical simulations demonstrate the efficiency of the proposed RS strategy and show a gain up to 27\% in the achievable ESR compared with state-of-the-art schemes, namely treating interference as noise (TIN) and non-orthogonal multiple access (NOMA) schemes.

cs.IT↗

arXiv2020

Characterization of Dielectric Materials by Sparse Signal Processing with Iterative Dictionary Updates

Estimating parameters and properties of various materials without causing damage to the material under test (MUT) is important in many applications. Thus, in this letter, we address this by wireless sensing. Here, the accuracy of the estimation depends on the accurate estimation of the properties of the reflected signal from the MUT (e.g., number of reflections, their amplitudes and time delays). For a layered MUT, there are multiple reflections and, due to the limited bandwidth at the receiver, these reflections superimpose each other. Since the number of reflections coming from the MUT is limited, we propose sparse signal processing (SSP) to decompose the reflected signal. In SSP, a so called dictionary is required to obtain a sparse representation of the signal. Here, instead of a fixed dictionary, a dictionary update technique is proposed to improve the estimation of the reflected signal. To validate the proposed method, a vector network analyzer (VNA) based measurement setup is used. It turns out that the estimated dielectric constants are in close agreement with the dielectric constants of the MUTs reported in literature. Further, the proposed approach outperforms the state-of-the-art model-based curve-fitting approach in thickness estimation.

eess.SP↗

arXiv2020

Supervised Learning Based Super-Resolution DoA Estimation Utilizing Antenna Array Extrapolation

In this paper, we introduce a novel algorithm that can dramatically reduce the number of antenna elements needed to accurately predict the direction of arrival (DOA) for multiple input multiple output (MIMO) radar. The new proposed algorithm predicts the received signal of a large antenna setup using reduced number of antenna by using coupled dictionary learning. Hence, this enables the MIMO radar to resolve more paths, which could not be resolved by the fewer antennas. Specifically, we overcome the problem of inaccurate DOA estimation due to a small virtual array setup. For example, we can use dictionary learning to predict 100 virtual array elements using only 25. To evaluate our algorithm, we used multiple signal classification (MUSIC) as a DOA estimation technique to estimate the DOA for non coherent multiple targets. The results show that using the predicted received signal, the proposed algorithm could resolve all the targets in the scene, which could not been resolved using only the received signal from the reduced antenna setup.

eess.SP↗