arXiv subjects

Aziz Benamrouche

Publications and source records attributed to Aziz Benamrouche.

9 recordsLinked to original sources

arXiv2026

Broadband on-chip Half Maxwell Fisheye

In this article, we report on the design and the experimental evidence of a Half Maxwell Fish Eye (HMFE), for Silicon Photonics and working at telecommunication wavelength. It is designed by implementing a Graded Photonic Crystal operating in the non-resonant metamaterial regime. The results of 3D Finite-Difference Time-Domain simulations (FDTD) show an excellent broadband focusing capacity. It has been urther fabricated via the Silicon On Insulator (SOI) platform for its compatibility with CMOS technology. Experimentally, its performances are firstly investigated by the means of a fan-shaped set output waveguides. Next, Scanning Near-Field Optical Microscopy (SNOM) characterisation confirms the wavefront curving inside the HMFE lens. Quantitative analysis of the SNOM results demonstrates its excellent focusing performances: the Full Width Half Maximum (FWHM) is $0.466\lambda_0$ at $\lambda_0=1550$nm, while the thickness of the lens is $3.18\lambda_0$.

physics.optics↗

arXiv2026

All-optical programming of polarization singularities in a photonic-crystal laser

Singular optics has emerged as an important research area with diverse applications, yet controlling optical singularities in nanophotonic emitters remains largely constrained by the fixed subwavelength geometry of optical resonators. Here, we circumvent this limitation and demonstrate all-optical programming of real-space polarization singularities in a photonic-crystal laser, while preserving a momentum-space vortex inherited from a symmetry-protected bound state in the continuum. The principle is to use a shaped optical pump to create a smooth mesoscopic potential, whose spatial variations are slow compared with the lattice period. This potential localizes a negative-mass Bloch band into trapped lasing states whose envelope functions, and therefore far-field singularity textures, are defined by the pump geometry. Using a honeycomb photonic crystal supporting a symmetry-protected bound state in the continuum, we achieve room-temperature telecom-band lasing with real-space polarization singularities pinned to the critical points of the envelope function, where its gradient vanishes, and reconfigurable in number and position by pump shaping, while the intrinsic momentum-space singularity at the $\Gamma$ point remains fixed. The experimental observations agree quantitatively with an analytical framework combining the Bloch mode of the photonic crystal with envelope-function theory, establishing optical envelope engineering as a route to programmable structured emission from active photonic lattices.

physics.optics↗

arXiv2026

Multi-wavelength UV Upconversion in Lanthanides assisted by Photonic Crystals

Upconversion luminescence consists of the absorption of low-energies photons followed by the emission of a higher energy photon. The process has mainly been studied in lanthanides to upconvert monochromatic near-infrared excitation to near-infrared or visible light, and has been exploited only to a limited extent to upconvert broad excitations to ultra-violet. In addition, upconverting near-infrared and visible light to ultra-violet is crucial for applications such as solar-to-fuel conversion or environmental remediation. However, upconversion luminescence is limited by the low absorption cross-sections of lanthanides. In this work, we engineered Bloch modes in a photonic crystal to assist a multi-wavelength upconversion mechanism and demonstrated a 28-fold enhancement of ultra-violet upconversion luminescence of Yb3+-Tm3+ doped thin films. Materials were selected and optimized to design nanostructures without parasitic absorption losses. The geometric parameters of the photonic crystals were scanned to match a slow-light resonance with an excited-state transition of Tm3+ and thus enhance incident visible light absorption. Ultra-violet light extraction was also enhanced by photonic crystal Bloch modes. Each of these two contributions were quantified and the measured photonic band structures were well reproduced by electromagnetic simulations.

physics.optics↗

arXiv2025

Homogeneous All-Inorganic Perovskite Films via High-Pressure Recrystallization

Metal halide perovskites are promising materials for optoelectronic applications owing to their outstanding optical and electronic properties. Among them, all-inorganic perovskites such as CsPbBr$_3$ offer superior thermal and chemical stability. However, obtaining high-quality CsPbBr$_3$ thin films via solution processing remains challenging due to the precursor's low solubility, and current additive or solvent engineering strategies are often complex and poorly reproducible. High-pressure recrystallization has recently emerged as a promising route to improve film quality, yet its impact on film properties remains insufficiently explored. Here, we systematically investigate the morphological, structural, and optical properties of CsPbBr$_3$ thin films prepared by high-pressure recrystallization, in comparison with standard non-recrystallized films. Optimized recrystallization at 300 bar produces smooth, pinhole-free, single-phase 3D perovskite layers with sub-nanometer roughness, while the film thickness is precisely tunable via precursor concentration. The process enhances both grain and crystallite sizes, leading to amplified spontaneous emission with a reduced excitation threshold and improved photostability. Temperature-dependent X-ray diffraction further reveals the orthorhombic--tetragonal--cubic phase transition, consistent with single-crystal behavior. This study provides fundamental insights into pressure-driven recrystallization and establishes a reproducible, scalable approach for fabricating high-quality CsPbBr$_3$ films for optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2025

Tailoring Flatband Dispersion in Bilayer Moir\'e Photonic Crystals

In this study, we experimentally investigate the photonic dispersion in one-dimensional moir\'e structures formed by stacking two photonic crystal slabs with slightly different periods, separated by a carefully controlled subwavelength optical spacer. Angle-resolved reflectivity measurements reveal moir\'e bands arising from the interplay between intra- and inter-layer coupling mechanisms of guided modes mediated by the moir\'e superlattice corrugation. By precisely adjusting the refractive index contrast through the filling factor of the photonic crystals, we continuously tune intralayer coupling while keeping interlayer coupling constant. Consequently, we experimentally demonstrate the evolution of moir\'e minibands into flatbands characterized by minimal dispersion bandwidth. All experimental results show good agreement with numerical simulations. Our findings not only confirm theoretical predictions but also provide a practical approach for realizing photonic flatbands in silicon-based moir\'e superlattices operating in the telecom wavelength range. This work paves the way toward harnessing flatband physics in advanced optoelectronic applications such as lasers and optical sensors.

physics.optics↗

arXiv2024

Erbium doped yttrium oxide thin films grown by chemical vapour deposition for quantum technologies

The obtention of quantum-grade rare-earth doped oxide thin films that can be integrated with optical cavities and microwave resonators is of great interest for the development of scalable quantum devices. Among the different growth methods, Chemical Vapour Deposition (CVD) offers high flexibility and has demonstrated the ability to produce oxide films hosting rare-earth ions with narrow linewidths. However, growing epitaxial films directly on silicon is challenging by CVD due to a native amorphous oxide layer formation at the interface. In this manuscript, we investigate the CVD growth of erbium-doped yttrium oxide (Er:Y2O3) thin films on different substrates, including silicon, sapphire, quartz or yttria stabilized zirconia (YSZ). Alternatively, growth was also attempted on an epitaxial Y2O3 template layer on Si (111) prepared by molecular beam epitaxy (MBE) in order to circumvent the issue of the amorphous interlayer. We found that the substrate impacts the film morphology and the crystalline orientations, with different textures observed for the CVD film on the MBE-oxide/Si template (111) and epitaxial growth on YSZ (001). In terms of optical properties, Er3+ ions exhibit visible and IR emission features that are comparable for all samples, indicating a high-quality local crystalline environment regardless of the substrate. Our approach opens interesting prospects to integrate such films into scalable devices for optical quantum technologies.

cond-mat.mtrl-sci↗

arXiv2024

Reversible single-pulse laser-induced phase change of Sb$_2$S$_3$ thin films: multi-physics modeling and experimental demonstrations

Phase change materials (PCMs) have gained a tremendous interest as a means to actively tune nanophotonic devices through the large optical modulation produced by their amorphous to crystalline reversible transition. Recently, materials such as Sb$_2$S$_3$ emerged as particularly promising low loss PCMs, with both large refractive index modulations and transparency in the visible and NIR. Controlling the local and reversible phase transition in this material is of major importance for future applications, and an appealing method to do so is to exploit pulsed lasers. Yet, the physics and limits involved in the optical switching of Sb$_2$S$_3$ are not yet well understood. Here, we investigate the reversible laser-induced phase transition of Sb$_2$S$_3$, focusing specifically on the mechanisms that drive the optically induced amorphization, with multi-physics considerations including the optical and thermal properties of the PCM and its environment. We theoretically and experimentally determine the laser energy threshold for reversibly changing the phase of the PCM, not only between fully amorphous and crystalline states but also between partially recrystallized states. We then reveal the non-negligible impact of the material's polycrystallinity and anisotropy on the power thresholds for optical switching. Finally, we address the challenges related to laser amorphization of thick Sb$_2$S$_3$ layers, as well as strategies to overcome them. These results enable a qualitative and quantitative understanding of the physics behind the optically-induced reversible change of phase in Sb$_2$S$_3$ layers.

physics.app-ph↗

arXiv2019

Early stages of GaAs nanowires VLS self-catalyzed growth on silica-terminated silicon substrate: A photoemission study

In this paper the early stages of the self-catalyzed Vapor-Liquid-Solid (VLS) growth of GaAs nanowires on epi-ready Si substrates by Molecular Beam Epitaxy (MBE) are studied. The interaction of Ga nano-droplets (NDs) with the silica overlayer is investigated by X-ray Photoemission Spectroscopy (XPS) and Atomic Force Microscopy (AFM). We show how Ga NDs drill the silica overlayer and make contact with bulk Si to allow GaAs nanowires (NWs) epitaxial growth by studying each of the three steps of the NW growth process sequentially: Ga NDs pre-deposition, post-deposition annealing to reach the NW growth temperature, and finally NW growth itself. The pre-deposition temperature allows to control the density and morphology of the NDs. A high enough annealing temperature enhances the reduction of SiOx by Ga oxidation and leads to the formation of holes which is seen by a new component in XPS spectra, assumed to be the consequence of the Ga-Si interaction. Finally, these nano-holes act as nucleation sites for the epitaxial GaAs VLS growth. During the GaAs growth, three different chemical environments of Ga are identified in Ga2p core level: metallic Ga due to the droplets at the top of the NWs, Ga oxide in contact with the SiOx overlayer and Ga arsenide from NWs.

cond-mat.mtrl-sci↗

arXiv2014

Optical characterization of active photon cages

Recently, we developed a new family of 3D photonic hollow resonators which theoretically allow tight confinement of light in a fluid (gaz or liquid): the photon cages. These new resonators could be ideal for sensing applications since they not only localize the electromagnetic energy in a small mode volume but also enforce maximal overlap between this localized field and the environment (i.e. a potential volume of nano-particles). In this work, we will present numerical and experimental studies of the interaction of a photon cage optical mode with nano-emitters. For this, PbS quantum dot emitters in a PDMS host matrix have been introduced in photon cages designed to have optimal confinement properties when containing a PDMS-based active medium. Photoluminescence measurements have been performed and the presence of quantum dot emitters in the photon cages has been demonstrated.

physics.optics↗