SearcharxivSearch

arXiv subjects

B. Bugeat

Publications and source records attributed to B. Bugeat.

4 recordsLinked to original sources

Instability in strongly stratified plane Couette flow with application to supercritical fluids

This paper addresses the stability of plane Couette flow in the presence of strong density and viscosity stratifications. It demonstrates the existence of a generalised inflection point that satisfies the generalised Fjortoft's criterion of instability when a minimum of kinematic viscosity is present in the base flow. The characteristic scales associated with this minimum are identified as the primary controlling parameters of the associated instability, regardless of the type of stratification. To support this finding, analytical stability models are derived in the long wave approximation using piecewise linear base flows. Numerical stability calculations are carried out to validate these models and to provide further information on the production of disturbance vorticity. All instabilities are interpreted as arising from the interaction between two vorticity waves. Depending on the type of stratification, these two waves are produced by different physical mechanisms. When both strong density and viscosity stratifications are present, we show that they result from the concurrent action of shear and inertial baroclinic effects. The stability models developed for simple fluid models ultimately shed light on a recently observed unstable mode in supercritical fluids (Ren et al., J. Fluid Mech., vol. 871, 2019, pp. 831-864), providing a quantitative prediction of the stability diagram and identifying the dominant mechanisms at play. Furthermore, our study suggests that the minimum of kinematic viscosity reached at the Widom line in these fluids is the leading cause of their instability. The existence of similar instabilities in different fluids and flows (e.g., miscible fluids) is finally discussed.

physics.flu-dyn

Acoustic resolvent analysis of turbulent jets

We perform a resolvent analysis of a compressible turbulent jet, where the optimisation domain of the response modes is located in the acoustic field, excluding the hydrodynamic region, in order to promote acoustically efficient modes. We examine the properties of the acoustic resolvent and assess its potential for jet-noise modelling, focusing on the subsonic regime. Resolvent forcing modes, consistent with previous studies, are found to contain supersonic waves associated with Mach wave radiation in the response modes. This differs from the standard resolvent in which hydrodynamic instabilities dominate. We compare resolvent modes with SPOD modes educed from LES data. Acoustic resolvent response modes generally have better alignment with acoustic SPOD modes than standard resolvent response modes. For the optimal mode, the angle of the acoustic beam is close to that found in SPOD modes for moderate frequencies. However, there is no significant separation between the singular values of the leading and sub-optimal modes. Some suboptimal modes are furthermore shown to contain irrelevant structure for jet noise. Thus, even though it contains essential acoustic features absent from the standard resolvent approach, the SVD of the acoustic resolvent alone is insufficient to educe a low-rank model for jet noise. But because it identifies the prevailing mechanisms of jet noise, it provides valuable guidelines in the search of a forcing model (Karban \textit{et al.} An empirical model of noise sources in subsonic jets. \textit{Journal of Fluid Mechanics} (2023): A18).

physics.flu-dyn

Low-frequency resolvent analysis of the laminar oblique shock wave / boundary layer interaction

Resolvent analysis is used to study the low-frequency behaviour of the laminar oblique shock wave / boundary layer interaction (SWBLI). It is shown that the computed optimal gain, which can be seen as a transfer function of the system, follows a first-order low-pass filter equation, recovering the results of Touber and Sandham (JFM, 2011). This behaviour is understood as proceeding from the excitation of a single stable, steady global mode whose damping rate sets the time scale of the filter. Different Mach and Reynolds numbers are studied, covering different recirculation lengths $L$. This damping rate is found to scale as $1/L$, leading to a constant Strouhal number $St_L$ as observed in the literature. It is associated with a breathing motion of the recirculation bubble. This analysis furthermore supports the idea that the low-frequency dynamics of the SWBLI is a forced dynamics, in which background perturbations continuously excite the flow. The investigation is then carried out for 3D perturbations for which two regimes are identified. At low wave numbers of the order of $L$, a modal mechanism similar to that of 2D perturbations is found and exhibits larger values of the optimal gain. At larger wave numbers of the order of the boundary layer thickness, the growth of streaks, which results from a non-modal mechanism, is detected. No interaction with the recirculation region is observed. Based on these results, the potential prevalence of 3D effects in the low-frequency dynamics of the SWBLI is discussed.

physics.flu-dyn

Ambiguity in mean-flow-based linear analysis

Linearisation of the Navier-Stokes equations about the mean of a turbulent flow forms the foundation of popular models for energy amplification and coherent structures, including resolvent analysis. While the Navier-Stokes equations can be equivalently written using many different sets of dependent variables, we show that the properties of the linear operator obtained via linearisation about the mean depend on the variables in which the equations are written prior to linearisation. For example, we show that using primitive and conservative variables leads to differences in the singular values and modes of the resolvent operator for turbulent jets, and that the differences become more severe as variable-density effects increase. This lack of uniqueness of mean-flow-based linear analysis provides new opportunities for optimizing models by specific choice of variables while also highlighting the importance of carefully accounting for the nonlinear terms that act as a forcing on the resolvent operator.

physics.flu-dyn