arXiv subjects

B. C. Khoo

Publications and source records attributed to B. C. Khoo.

7 recordsLinked to original sources

arXiv2023

Drag reduction study of naturally occurring oscillating axial flow induced by helical corrugated surface in Taylor Couette flow

This study investigates drag reduction capability of naturally-occurring-oscillating axial secondary flow(ASF) induced by helical-corrugated surface in Taylor Couette flow(TCFHelical) for three values of pitch to wavelength-ratios(P* =1,2,3) and amplitude to wavelength-ratio(A*) of 0.25. As reported in Razzak et al. (2020), emergence of naturally-occurring-oscillating ASF induced by longitudinal-corrugated surface in TCF(TCFLongitudinal) and increasing trend on its magnitude with Reynolds number (Re) results in the occurrence of drag reduction. This has motivated us to study the possibility of enhancing drag reduction by maintaining a consistently increasing trend with Re in the magnitude of naturally-occurring-oscillating ASF induced by the helical-corrugated surface on the stationary outer cylinder in TCF. From flow structures, steady ASF with non-zero mean is observed at Re=60 which suppresses the strength of azimuthal vorticities for Re>85 and contributed to occurrence of drag reduction. As Re is increased to 100,90 and 85 for P* =1,2, and 3, respectively, formation of periodic oscillating ASF with non-zero mean and its increasing trend in magnitude with Re suppresses azimuthal vorticities further which contributes to the maximum drag reduction of 13%. For Re>165,145 and 140 for P*=1,2 and 3, respectively, non-periodic oscillating ASF is observed, and its magnitude remains nearly unchanged or decreases slightly with Re which results in the suppression effect of azimuthal vortices to be weaker. This results in decrease in drag reduction. Oscillating ASF observed in TCFHelical is found to occur at earlier Re and it is stronger than that of TCFLongitudinal which contributes to occurrence of higher drag reduction in TCFHelical.

physics.flu-dyn↗

arXiv2023

A variational quantum algorithm-based numerical method for solving potential and Stokes flows

This paper presents a numerical method based on the variational quantum algorithm to solve potential and Stokes flow problems. In this method, the governing equations for potential and Stokes flows can be respectively written in the form of Laplace's equation and Stokes equations using velocity potential, stream function and vorticity formulations. Then the finite difference method and the generalised differential quadrature (GDQ) method are applied to discretize the governing equations. For the prescribed boundary conditions, the corresponding linear systems of equations can be obtained. These linear systems are solved by using the variational quantum linear solver (VQLS), which resolves the potential and Stokes flow problems equivalently. To the best of authors' knowledge, this is the first study that incorporates the GDQ method which is inherently a high-order discretization method with the VQLS algorithm. Since the GDQ method can utilize much fewer grid points than the finite difference method to approximate derivatives with a higher order of accuracy, the size of the input matrix for the VQLS algorithm can be smaller. In this way, the computational cost may be saved. The performance of the present method is comprehensively assessed by two representative examples, namely, the potential flow around a circular cylinder and Stokes flow in a lid-driven cavity. Numerical results validate the applicability and accuracy of the present VQLS-based method. Furthermore, its time complexity is evaluated by the heuristic scaling, which demonstrates that the present method scales efficiently in the number of qubits and the precision. This work brings quantum computing to the field of computational fluid dynamics. By virtue of quantum advantage over classical methods, promising advances in solving large-scale fluid mechanics problems of engineering interest may be prompted.

physics.flu-dyn↗

arXiv2021

Aeroelastic mode decomposition framework and mode selection mechanism in fluid-membrane interaction

In this study, we present a global Fourier mode decomposition framework for unsteady fluid-structure interaction. We apply the framework to isolate and extract the aeroelastic modes arising from a coupled three-dimensional fluid-membrane system. The proposed framework is employed to decompose the physical variables in the fluid and structural domains into frequency-ranked aeroelastic modes in a unified way. We observe the frequency synchronization between the vortex shedding and the structural vibration via mode decomposition analysis. We examine the role of flexibility in the aeroelastic mode selection and perform a systematic comparison of flow features among a rigid wing, a rigid cambered wing and a flexible membrane. With the aid of our mode decomposition technique, we find that the dominant structural mode exhibits a chordwise second and spanwise first mode at different angles of attack. The structural natural frequency corresponding to this mode is estimated using an approximate analytical formula. By examining the dominant frequency of the coupled system, we find that the dominant membrane vibrational mode is selected via the frequency lock-in between the dominant vortex shedding frequency and the structural natural frequency. From the fluid modes and the mode energy spectra at $α=20^\circ$ and $25^\circ$, the aeroelastic modes corresponding to the non-integer frequency components lower than the dominant frequency are found to be associated with the bluff body vortex shedding instability. The non-periodic aeroelastic response observed at higher angles of attack are related to the interaction between aeroelastic modes caused by the frequency lock-in and the bluff-body-like vortex shedding.

physics.flu-dyn↗

arXiv2019

Stokesian dynamics of pill-shaped Janus particles with stick and slip boundary conditions

We study the forces and torques experienced by pill-shaped Janus particles of different aspect ratios where half of the surface obeys the no-slip boundary condition and the other half obeys the Navier slip condition of varying slip lengths. Using a recently developed boundary integral formulation whereby the traditional singular behaviour of this approach is removed analytically, we quantify the strength of the forces and torques experienced by such particles in a uniform flow field in the Stokes regime. Depending on the aspect ratio and the slip length, the force transverse to the flow direction can change sign. This is a novel property unique to the Janus nature of the particles.

cond-mat.soft↗

arXiv2019

A robust and non-singular formulation of the boundary integral method for the potential problem

A non-singular formulation of the boundary integral method (BIM) is presented for the Laplace equation whereby the well-known singularities that arise from the fundamental solution are eliminated analytically. A key advantage of this approach is that numerical errors that arise due to the proximity of nodes located on osculating boundaries are suppressed. This is particularly relevant in multi-scale problems where high accuracy is required without undue increase in computational cost when the spacing between boundaries become much smaller than their characteristic dimensions. The elimination of the singularities means that standard quadrature can be used to evaluate the surface integrals and this results in about 60% savings in coding effort. The new formulation also affords a numerically robust way to calculate the potential close to the boundaries. Detailed implementations of this approach are illustrated with problems involving osculating boundaries, 2D domains with corners and a wave drag problem in a 3D semi-infinite domain. The explicit formulation of problems with axial symmetry is also given.

math.NA↗

arXiv2019

Boundary regularised integral equation formulation of the Helmholtz equation in acoustics

A boundary integral formulation for the solution of the Helmholtz equation is developed in which all traditional singular behaviour in the boundary integrals is removed analytically. The numerical precision of this approach is illustrated with calculation of the pressure field due to radiating bodies in acoustic wave problems. This method facilitates the use of higher order surface elements to represent boundaries, resulting in a significant reduction in the problem size with improved precision. Problems with extreme geometric aspect ratios can also be handled without diminished precision. When combined with the CHIEF method, uniqueness of the solution of the exterior acoustic problem is assured without the need to solve hypersingular integrals.

physics.comp-ph↗

arXiv2019

Boundary regularized integral equation formulation (BRIEF) of Stokes flow

Single-phase Stokes flow problems with prescribed boundary conditions can be formulated in terms of a boundary regularized integral equation that is completely free of singularities that exist in the traditional formulation. The usual mathematical singularities that arise from using the fundamental solution in the conventional boundary integral method are removed by subtracting a related auxiliary flow field, $\boldsymbol{w}$, that can be constructed from one of many known fundamental solutions of the Stokes equation. This approach is exact and does not require the introduction of additional cutoff parameters. The numerical implementation of this boundary regularized integral equation formulation affords considerable savings in coding effort with improved numerical accuracy. The high accuracy of this formulation is retained even in problems where parts of the boundaries may almost be in contact.

physics.comp-ph↗