Searcharxiv⌕ Search

arXiv subjects

B. Cros

Publications and source records attributed to B. Cros.

At least 19 recordsLinked to original sources
arXiv2026

Combined tools for Particle-In-Cell simulations performed with transversely asymmetric chirped lasers

We introduce the Asymmetric Chirped Electric field reconstruction (ACE) toolbox, a suite of algorithms enabling the reconstruction of a laser transverse distribution coupled to a chirped temporal profile. This suite includes the implementation of the reconstructed distribution in Particle In-Cell simulations in cylindrical and Cartesian geometry. Under the assumption of negligible spatio-temporal couplings, the ACE toolbox extends a previously established method for realistic simulations of the transverse distribution by adding spectral chirping to the modal decomposition of the electric field. The relevance of the ACE toolbox is demonstrated through the modelling of a Laser Wakefield Acceleration experiment where the produced electron bunch was optimized via spectral chirping of the laser pulse.

physics.plasm-ph↗
arXiv2026

Plasma dechirper and lens for electron beams from laser wakefield acceleration in a tailored density profile

Achieving high-quality electron beams from laser wakefield accelerators critically relies on density tailoring to control electron dynamics during injection, acceleration, and extraction. We report on the experimental observation of electron beam acceleration and shaping, in transverse momentum and longitudinal phase space, controlled by plasma density tailoring in a gas cell. Electron beams with a FWHM charge of 40 pC at an energy of 190 MeV, 3.4\% energy spread and an rms divergence of 0.46 mrad, corresponding to a transverse momentum spread of 0.2 $m_e c$, have been measured. These beams have a peak spectral brightness of up to 8 pC/MeV/mrad. Simulations using experimental parameters as input show that acceleration in the plasma plateau leads to chirped electron beams which then undergo transverse momentum spread reduction in a plasma down-ramp followed by dechirping in a 10~mm long plasma tail, leading to the measured peaked spectra. %\textcolor{blue}{A control experiment with and without the LPT confirms these results.} The comparison of experimental results with and without long plasma tail confirms this analysis.

physics.plasm-ph↗
arXiv2025

Observation of laser plasma accelerated electrons with transverse momentum spread below the thermal level

Achieving high-quality electron beams from laser-plasma accelerators critically relies on density tailoring to control electron dynamics during injection, acceleration, and extraction. We report on the experimental observation of electron beam acceleration and 3D shaping, in transverse momentum and longitudinal phase space, controlled by plasma density tailoring in a gas cell. It leads to relativistic electron beams with a transverse momentum spread of 0.2 mec, below the thermal level imprinted by the process of ionization injection in a laser-driven wakefield accelerator. These beams have a charge of 40 pC at an energy of 190 MeV with 1.9% energy spread and an rms divergence of 0.54 mrad, resulting in single-peak spectra with a brightness of up to 8 pC/MeV/mrad. Using numerical simulations, we show that the decrease in transverse momentum spread starts in the downramp and continues in a 10 mm long plasma tail at the exit of the gas cell, where it is accompanied by energy dechirping.

physics.plasm-ph↗
arXiv2025

Contribution of ALEGRO to the Update of the European Strategy on Particle Physics

Advanced and novel accelerators (ANAs), driven a by laser pulse or a relativistic particle bunch, have made remarkable progress over the last decades. They accelerated electrons by 10GeV in 30cm (laser driven) and by 42GeV in 85cm (particle bunch driven). Rapid progress continues with lasers, plasma sources, computational methods, and more. In this document we highlight the main contributions made by the various major collaborations, facilities, and experiments that develop ANAs for applications to particle and high-energy physics. These include: ALiVE, ANL-AWA, AWAKE, BNL-ATF, CEPC Injector, DESY-KALDERA, ELI ERIC, EuPRAXIA, HALHF, LBNL-BELLA, LBNL-kBELLA, LCvison, PETRA IV Injector, 10TeV Collider design, SLAC-FACET II, as well as the development of structures, lasers and plasma sources, and sustainability, and demonstrate the intense activities in the field. ANAs can have, and already have, applications to particle and high-energy physics as subsystems, the so-called intermediate applications: injectors, lower energy experiments, beam dump experiments, test beds for detectors, etc. Additionally, an ANA could be an upgrade for any Higgs factory based on a linear accelerator, as proposed in the LCvison project. ANAs have advantages over other concepts for reaching multi-TeV energies: lower geographical and environmental footprints, higher luminosity to power ratio, and are thus more sustainable than other accelerators. However, ANAs must still meet a number of challenges before they can produce bunches with parameters and the luminosity required for a linear collider at the energy frontier. It is therefore extremely important to strongly support vigorous R&D of ANAs, because they are, at this time, the most sustainable acceleration scheme to reach very high energies with a linear accelerator.

physics.acc-ph↗
arXiv2024

Technical Status Report on Plasma Components and Systems in the context of EuPRAXIA

The EuPRAXIA project aims to construct two state-of-the-art accelerator facilities based on plasma accelerator technology. Plasma-based accelerators offer the possibility of a significant reduction in facility size and cost savings over current radio frequency (RF) accelerators. The two facilities - one laser-driven one a beam-driven - are envisioned to provide electron beams with an energy in the range of 1-5 GeV and beam quality comparable to existing RF machines. This will enable a versatile portfolio of applications from compact free-electron laser (FEL) drivers to sources for medical and industrial imaging. At the heart of both facilities is the use of plasma-based accelerator components and systems which encompass not only the accelerating medium itself, but also a range of auxiliary systems such as plasma-based electron beam optics and plasma-based mirrors for high-intensity lasers. From a technical standpoint, a high-degree of control over these plasma devices will be essential for EuPRAXIA to achieve its target performance goals. The ability to diagnose and characterize these plasma devices and to simulate their operation will be further essential success factors. Additionally, compatibility with extended operation at high-repetition rates and integration into the accelerator beamline will also prove crucial. In this work, we aim to review the current status of plasma components and related systems for both laser-driven and beam-driven plasma accelerators and to assess challenges to be addressed regarding implementation at future EuPRAXIA facilities.

physics.plasm-ph↗
arXiv2024

Report on the Advanced Linear Collider Study Group (ALEGRO) Workshop 2024

The workshop focused on the application of ANAs to particle physics keeping in mind the ultimate goal of a collider at the energy frontier (10\,TeV, e$^+$/e$^-$, e$^-$/e$^-$, or $\gamma\gamma$). The development of ANAs is conducted at universities and national laboratories worldwide. The community is thematically broad and diverse, in particular since lasers suitable for ANA research (multi-hundred-terawatt peak power, a few tens of femtosecond-long pulses) and acceleration of electrons to hundreds of mega electron volts to multi giga electron volts became commercially available. The community spans several continents (Europe, America, Asia), including more than 62 laboratories in more than 20 countries. It is among the missions of the ICFA-ANA panel to feature the amazing progress made with ANAs, to provide international coordination and to foster international collaborations towards a future HEP collider. The scope of this edition of the workshop was to discuss the recent progress and necessary steps towards realizing a linear collider for particle physics based on novel-accelerator technologies (laser or beam driven in plasma or structures). Updates on the relevant aspects of the European Strategy for Particle Physics (ESPP) Roadmap Process as well as of the P5 (in the US) were presented, and ample time was dedicated to discussions. The major outcome of the workshop is the decision for ALEGRO to coordinate efforts in Europe, in the US, and in Asia towards a pre-CDR for an ANA-based, 10\,TeV CM collider. This goal of this coordination is to lead to a funding proposal to be submitted to both EU and EU/US funding agencies. This document presents a summary of the workshop, as seen by the co-chairs, as well as short 'one-pagers' written by the presenters at the workshop.

physics.acc-ph↗
arXiv2023

Experimental characterisation of a single-shot spectrometer for high-flux, GeV-scale gamma-ray beams

We report on the first experimental characterisation of a gamma-ray spectrometer designed to spectrally resolve high-flux photon beams with energies in the GeV range. The spectrometer has been experimentally characterised using a bremsstrahlung source obtained at the Apollon laser facility during the interaction of laser-wakefield accelerated electron beams (maximum energy of 1.7 GeV and overall charge of 207$\pm$62 pC) with a 1 mm thick tantalum target. Experimental data confirms the possibility of performing single-shot measurements, without the need for accumulation, with a high signal to noise ratio. Scaling the results to photons in the multi-GeV range suggests the possibility of achieving percent-level energy resolution, as required, for instance, by the next generation of experiments in strong-field quantum electrodynamics.

physics.ins-det↗
arXiv2023

Plasma density profile reconstruction of a gas cell for Ionization Induced Laser Wakefield Acceleration

Laser-driven plasma wakefields can provide hundreds of MeV electron beam in mm-range distances potentially shrinking the dimension of the actual particle accelerators. The plasma density plays a fundamental role in the control and stability of the acceleration process, which is a key development for the future electron injector proposed by EuPRAXIA. A gas cell was designed by LPGP and LIDYL teams, with variable length and backing pressure, to confine the gas and tailor the gas density profile before the arrival of the laser. This cell was used during an experimental campaign with the multi TW-class laser at the Lund Laser Centre. Ionization assisted injection in a tailored density profile is used to tune the electron beam properties. During the experiment, we filled the gas cell with hydrogen mixed with different concentration of nitrogen. We also varied the backing pressure of the gas and the geometrical length of the gas cell. We used a transverse probe to acquire shadowgraphic images of the plasma and to measure the plasma electron density. Methods and results of the analysis with comparisons between shadowgraphic and interferometric images will be discussed.

physics.plasm-ph↗
arXiv2022

Mechanisms to control laser-plasma coupling in laser wakefield electron acceleration

Experimental results, supported by precise modelling, demonstrate optimisation of a plasma-based injector with intermediate laser pulse energy ($<1$ J), corresponding to a normalised vector potential $a_0 = 2.15$, using ionisation injection in a tailored plasma density profile. An increase in electron bunch quality and energy is achieved experimentally with the extension of the density downramp at the plasma exit. Optimisation of the focal position of the laser pulse in the tailored plasma density profile is shown to efficiently reduce electron bunch angular deviation, leading to a better alignment of the electron bunch with the laser axis. Single peak electron spectra are produced in a previously unexplored regime by combining an early focal position and adaptive optic control of the laser wavefront through optimising the symmetry of the pre-focal laser energy distribution. Experimental results have been validated through particle-in-cell simulations using realistic laser energy, phase distribution, and temporal envelope, allowing for accurate predictions of difficult to model parameters, such as total charge and spatial properties of the electron bunches, opening the way for more accurate modelling for the design of plasma-based accelerators.

physics.plasm-ph↗
arXiv2022

European Strategy for Particle Physics -- Accelerator R&D Roadmap

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.

physics.acc-ph↗
arXiv2019

ALEGRO input for the 2020 update of the European Strategy

Advanced and Novel Accelerators (ANAs) can provide acceleration gradients orders of magnitude greater than conventional accelerator technologies, and hence they have the potential to provide a new generation of more compact, high-energy machines. In view of the great promise of ANAs, and the substantial effort worldwide to develop them, the Advanced LinEar collider study GROup, ALEGRO, was formed at the initiative of the ICFA ANA panel. ALEGRO aims to foster studies on accelerators based on ANAs for applications to high-energy physics, with the ambition of proposing a machine that would address the future goals of particle physics. This document summarizes the current view of the international community on this topic. It proposes a list of priorities that the community would like to invest effort in over the next five to ten years.

physics.acc-ph↗
arXiv2018

Investigation of the dynamics of ionization induced injected electrons under the influence of beam loading effects

In laser-driven wakefield, ionization induced injection is an efficient way to inject electrons in the plasma wave. A detailed study on the beam dynamics under the influence of beam loading effects, which can be controlled by the concentration of nitrogen impurity introduced in the hydrogen gas was conducted. For a specific value of this percentage, the final energy of the high-energy electron bunch becomes nearly independent of the trapped positions, thus leading to a small energy dispersion. We also show that the final beam emittance is mainly determined by the injection process.

physics.plasm-ph↗
arXiv2018

Gas cell density characterization for laser wakefield acceleration

In the design of laser plasma electron injectors for multi-stage laser driven wakefield accelerators, the control of plasma density is a key element to stabilize the acceleration process. A cell with variable parameters is used to confine the gas and tailor the density profile. The gas filling process was characterized both experimentally and by fluid simulations. Results show a good agreement between experiments and simulations. Simulations were also used to study the effect of each of the gas cell parameters on the density distribution and show the possibility to finely control the density profile.

physics.acc-ph↗
arXiv2017

Optimization of laser-plasma injector via beam loading effects using ionization-induced injection

Simulations of ionization induced injection in a laser driven plasma wakefield show that high-quality electron injectors in the 50-200 MeV range can be achieved in a gas cell with a tailored density profile. Using the PIC code Warp with parameters close to existing experimental conditions, we show that the concentration of $\mathrm{N_2}$ in a hydrogen plasma with a tailored density profile is an efficient parameter to tune electron beam properties through the control of the interplay between beam loading effects and varying accelerating field in the density profile. For a given laser plasma configuration, with moderate normalized laser amplitude, $a_0=1.6$ and maximum electron plasma density, $n_{e0}=4\times 10^{18}\,\mathrm{cm^{-3}}$, the optimum concentration results in a robust configuration to generate electrons at 150~MeV with a rms energy spread of 4\% and a spectral charge density of 1.8~pC/MeV.

physics.plasm-ph↗
arXiv2017

Laser-driven Plasma Wakefield: Propagation Effects

In the frame of laser-driven wakefield acceleration, the main characteristics oflaser propagation and plasma wave excitation are described, with an emphasis onthe role of propagation distance for electron acceleration. To optimizeinteraction length and maximize energy gain, operation at low plasma density isthe most promising regime for achieving ultra-relativistic energies. Among thepossible methods of extending propagation length at low plasma density, laserguiding by grazing incidence reflection at the wall of dielectric capillarytubes has several assets. The properties of laser guiding and the measurement ofplasma waves over long distances are presented.

physics.acc-ph↗