Searcharxiv⌕ Search

arXiv subjects

B. Darquié

Publications and source records attributed to B. Darquié.

14 recordsLinked to original sources

Fault-tolerant hyper-Ramsey spectroscopy of ultra-narrow clock transitions with dynamical decoupling

A probe laser field that interrogates an atomic transition also shifts it. Although Hyper-Ramsey (HR) spectroscopy was developed to mitigate these light-induced frequency shifts, the technique remains sensitive to probe intensity fluctuations. In this work, we introduce a novel class of dynamically decoupled hyper-Ramsey (DDHR) sequences that utilize a modified refocusing pulse to effectively eliminate this residual sensitivity. This three-pulse interferometric protocol significantly enhances the contrast of quantum interference fringes while providing robust immunity against probe-induced frequency shifts, even in the presence of external field inhomogeneities. We experimentally validate both HR and DDHR protocols on the NQCH and \textcolor{blue}{IQM} superconducting quantum processor, demonstrating an error scaling that is rigorously consistent with theoretical simulations of the optical clock regime. DDHR spectroscopy yields superior suppression of residual probe-induced frequency shifts compared to the standard HR scheme under probe amplitude fluctuation and decoherence. Furthermore, we demonstrate that the implementation of composite refocusing pulses, derived from a Pascal binomial tree architecture, gives substantial resilience against technical pulse area imperfections. Ultimately, fault-tolerant, dynamically decoupled hyper-clocks will offer a promising experimental platform for the evaluation of advanced, NMR-inspired DDHR sequences of multiple refocusing pulses holding significant potential for high-precision matter/antimatter quantum sensing and rigorous tests of fundamental physics within harsh electromagnetic environments.

physics.atom-ph↗

Wavelength modulation laser spectroscopy of N$_2$O at 17 $μ$m

Using a mid-infrared quantum cascade laser and wavelength modulation absorption spectroscopy, we measure the frequencies of ro-vibrational transitions of N$_2$O in the 17 $μ$m region with uncertainties below 5 MHz. These lines, corresponding to the bending mode of the molecule, can be used for calibration of spectrometers in this spectral region. We present a model for the lineshapes of absorption features in wavelength modulation spectroscopy that takes into account Doppler broadening, collisional broadening, saturation of the absorption, and lineshape distortion due to frequency and intensity modulation. Combining our data with previous measurements, we provide a set of spectroscopic parameters for several vibrational states of N$_2$O. The lines measured here fall in the same spectral region as a mid-infrared frequency reference that we are currently developing using trapped, ultracold molecules. With such a frequency reference, the spectroscopic methods demonstrated here have the potential to improve frequency calibration in this part of the spectrum.

physics.atom-ph↗

Highly coherent phase-lock of an 8.1 $μ$m quantum cascade laser to a turn-key mid-IR frequency comb

A continuous-wave Fabry-Perot quantum cascade laser (QCL) emitting at 8.1 $μ$m operating in the single mode regime has been coherently phase locked to a turn-key low-noise commercial mid-Infrared (mid-IR) optical frequency comb. The stability of the comb used as a reference is transferred to the QCL resulting in an integrated residual phase error of 0.4 rad. The laser linewidth is narrowed by more than two orders of magnitude reaching sub-kHz level at 1 ms observation time, limited by the spectral purity of the mid-IR comb. Our experiment is an important step toward the development of both powerful and metrology-grade QCLs and fully stabilized QCL frequency comb and opens perspectives for precision measurements and frequency metrology in the mid-IR.

physics.optics↗

Linear probing of molecules at micrometric distances from a surface with sub-Doppler frequency resolution

We report on precision spectroscopy of sub-wavelength confined molecular gases. This was obtained by rovibrational selective reflection of $\mathrm{NH_3}$ and $\mathrm{SF_6}$ gases using a quantum cascade laser at $λ\approx 10.6 μm$. Our technique probes molecules at micrometric distances ($\approx λ/2π$) from the window of a macroscopic cell with sub-MHz resolution, allowing molecule-surface interaction spectroscopy. We exploit the linearity and high-resolution of our technique to gain novel spectroscopic information on the $\mathrm{SF_6}$ greenhouse gas, useful for enriching molecular databases. The natural extension of our work to thin-cells will allow compact frequency references and improved measurements of the Casimir-Polder interaction with molecules.

physics.optics↗

Lamb-dips and Lamb-peaks in the saturation spectrum of HD

The saturation spectrum of the R(1) transition in the (2-0) band in HD is found to exhibit a composite line shape, involving a Lamb-dip and a Lamb-peak. We propose an explanation for such behavior based on the effects of cross-over resonances in the hyperfine substructure, which is made quantitative in a density-matrix calculation. This resolves an outstanding discrepancy on the rovibrational R(1) transition frequency, which is now determined at 217 105 181 901 (50) kHz and in agreement with current theoretical calculations.

physics.atom-ph↗

A new experiment to test parity symmetry in cold chiral molecules using vibrational spectroscopy

We present a brief review of our progress towards measuring parity violation in heavy-metal chiral complexes using mid-infrared Ramsey interferometry. We discuss our progress addressing the main challenges, including the development of buffer-gas sources of slow, cold polyatomic molecules, and the frequency-stabilisation of quantum cascade lasers calibrated using primary frequency standards. We report investigations on achiral test species of which promising chiral derivatives have been synthesized.

physics.atom-ph↗

High-precision methanol spectroscopy with a widely tunable SI-traceable frequency-comb-based mid-infrared QCL

There is an increasing demand for precise molecular spectroscopy, in particular in the mid-infrared fingerprint window that hosts a considerable number of vibrational signatures, whether it be for modeling our atmosphere, interpreting astrophysical spectra or testing fundamental physics. We present a high-resolution mid-infrared spectrometer traceable to primary frequency standards. It combines a widely tunable ultra-narrow Quantum Cascade Laser (QCL), an optical frequency comb and a compact multipass cell. The QCL frequency is stabilized onto a comb controlled with a remote near-infrared ultra-stable laser, transferred through a fiber link. The resulting QCL frequency stability is below 10-15 from 0.1 to 10s and its frequency uncertainty of 4x10-14 is given by the remote frequency standards. Continuous tuning over ~400 MHz is reported. We use the apparatus to perform saturated absorption spectroscopy of methanol in the low-pressure multipass cell and demonstrate a statistical uncertainty at the kHz level on transition center frequencies, confirming its potential for driving the next generation technology required for precise spectroscopic measurements.

physics.atom-ph↗

Studying fundamental physics using quantum enabled technologies with trapped molecular ions

The text below was written during two visits that Daniel Segal made at Universit{é} Paris 13. Danny stayed at Laboratoire de Physique des Lasers the summers of 2008 and 2009 to participate in the exploration of a novel lead in the field of ultra-high resolution spectroscopy. Our idea was to probe trapped molecular ions using Quantum Logic Spectroscopy (QLS) in order to advance our understanding of a variety of fundamental processes in nature. At that time, QLS, a ground-breaking spectroscopic technique, had only been demonstrated with atomic ions. Our ultimategoals were new approaches to the observation of parity violation in chiral molecules and tests of time variations of the fundamental constants. This text is the original research proposal written eight years ago. We have added a series of notes to revisit it in the light of what has been since realized in the field.

physics.atom-ph↗

Measuring the Boltzmann constant by mid-infrared laser spectroscopy of ammonia

We report on our ongoing effort to measure the Boltzmann constant, $k_B,$ using the Doppler broadening technique on ammonia. This paper presents some of the improvements made to the mid-infrared spectrometer including the use of a phase-stabilized quantum cascade laser, a lineshape analysis based on a refined physical model and an improved fitting program 2 increasing the confidence in our estimates of the relevant molecular parameters, and a first evaluation of the saturation parameter and its impact on the measurement of k B. A summary of the systematic effects contributing to the measurement is given and the optimal experimental conditions for mitigating those effects in order to reach a competitive measurement of $k_B$ at a part per million accuracy level are outlined.

physics.atom-ph↗

Shaking-induced dynamics of cold atoms in magnetic traps

We describe an experiment in which cold rubidium atoms, confined in an elongated magnetic trap, are excited by transverse oscillation of the trap centre. The temperature after excitation exhibits resonance as a function of the driving frequency. We measure these resonances at several different trap frequencies. In order to interpret the experiments, we develop a simple model that incorporates both collisions between atoms and the anharmonicity of the real three-dimensional trapping potential. As well as providing a precise connection between the transverse harmonic oscillation frequency and the temperature resonance frequency, this model gives insight into the heating and loss mechanisms, and into the dynamics of driven clouds of cold trapped atoms.

physics.atom-ph↗

Progress in atom chips and the integration of optical microcavities

We review recent progress at the Centre for Cold Matter in developing atom chips. An important advantage of miniaturizing atom traps on a chip is the possibility of obtaining very tight trapping structures with the capability of manipulating atoms on the micron length scale. We recall some of the pros and cons of bringing atoms close to the chip surface, as is required in order to make small static structures, and we discuss the relative merits of metallic, dielectric and superconducting chip surfaces. We point out that the addition of integrated optical devices on the chip can enhance its capability through single atom detection and controlled photon production. Finally, we review the status of integrated microcavities that have recently been demonstrated at our Centre and discuss their prospects for future development.

quant-ph↗

Atom detection and photon production in a scalable, open, optical microcavity

A microfabricated Fabry-Perot optical resonator has been used for atom detection and photon production with less than 1 atom on average in the cavity mode. Our cavity design combines the intrinsic scalability of microfabrication processes with direct coupling of the cavity field to single-mode optical waveguides or fibers. The presence of the atom is seen through changes in both the intensity and the noise characteristics of probe light reflected from the cavity input mirror. An excitation laser passing transversely through the cavity triggers photon emission into the cavity mode and hence into the single-mode fiber. These are first steps towards building an optical microcavity network on an atom chip for applications in quantum information processing.

quant-ph↗

Recent progress on the manipulation of single atoms in optical tweezers for quantum computing

This paper summarizes our recent progress towards using single rubidium atoms trapped in an optical tweezer to encode quantum information. We demonstrate single qubit rotations on this system and measure the coherence of the qubit. We move the quantum bit over distances of tens of microns and show that the coherence is reserved. We also transfer a qubit atom between two tweezers and show no loss of coherence. Finally, we describe our progress towards conditional entanglement of two atoms by photon emission and two-photon interferences.

quant-ph↗

The effect of self-affine fractal roughness of wires on atom chips

Atom chips use current flowing in lithographically patterned wires to produce microscopic magnetic traps for atoms. The density distribution of a trapped cold atom cloud reveals disorder in the trapping potential, which results from meandering current flow in the wire. Roughness in the edges of the wire is usually the main cause of this behaviour. Here, we point out that the edges of microfabricated wires normally exhibit self-affine roughness. We investigate the consequences of this for disorder in atom traps. In particular, we consider how closely the trap can approach the wire when there is a maximum allowable strength of the disorder. We comment on the role of roughness in future atom--surface interaction experiments.

quant-ph↗