SearcharxivSearch

arXiv subjects

B. Hong

Publications and source records attributed to B. Hong.

At least 19 recordsLinked to original sources

Measurement of the forward angle $^{12}$C+$^{12}$C fragmentation differential cross sections at 62 MeV/nucleon

The present work reports on high-precision measurements of forward-angle fragmentation differential cross sections for the [12]C +[12] C reaction at 62 MeV/nucleon using the FAZIA array. Angular distributions for fragments from Z = 1 to 6 were extracted in the range 2 <= theta_lab <= 8 degrees. Particle identification was achieved by combining the Delta E - E technique with Pulse Shape Analysis, and precise energy calibrations were performed. The results show that for heavier fragments, the angular distributions are better described by the Van Bibber formulation than by the Goldhaber model, consistent with the dominance of a wide component from dissipative processes in the measured angular range. Notably, alpha particles exhibit an anomalously narrow angular distribution, likely originating from the intrinsic cluster structure of [12]C. Comparisons with existing data at the same incident energy show very good agreement, with a more complete set of species reported here, while a kinematic scaling is proposed to compare our data with previous experimental data at 50 and 95 MeV/nucleon.

nucl-ex

Fast Microwave-free State Preparation and Measurement of Superconducting Qubits

Fast, high-fidelity, scalable state preparation and measurement is critical to the realization of a quantum computing system. The state-of-the-art methods for preparation and readout of superconducting qubits require finely tuned microwave signals and ~100 ns of measurement time, which are major obstacles to the scalability and performance of superconducting quantum computers. Here, we have demonstrated novel, microwave-free methods for both preparation and readout of superconducting qubits with >99% fidelity in only 10 ns for either operation while maintaining qubit coherence. This technology is compatible with scalable superconducting digital control systems, and using quantum flux parametrons for amplification, we demonstrated full quantum-to-digital conversion in only 15 ns, which is an order of magnitude faster than state-of-the-art microwave-based techniques.

quant-ph

Femtoscopy Measurement with S$\pi$RIT TPC in Radioactive BeamHeavy-ion Collisions

Femtoscopy is a powerful tool for exploring the dynamic emitting structure in heavy-ion collisions, while radioactive beam heavy-ion collisions enable the investigation of nuclear matter under extreme isospin conditions. Here, we successfully perform femtoscopy measurements using the S$\pi$RIT Time Projection Chamber (TPC). A dedicated correction scheme for track merging and splitting is proposed, which is well applicable to rectangular TPCs housed inside dipole magnets and effectively improves the reconstructed correlation functions at small relative momenta. Focusing on the proton-proton (p-p) correlation function in the 270 MeV/u $^{132}\text{Sn}+^{124}\text{Sn}$ system, we successfully apply the track merging and splitting correction; additionally, the TPC angular acceptance exhibits a negligible impact on the correlation function. A systematic uncertainty quantification framework is established. The experimental results of the p-p correlation function confirm the feasibility of the S$\pi$RIT TPC for femtoscopy measurements and provide technical support for high-precision femtoscopy studies using rectangular TPCs in radioactive beam heavy-ion collisions.

physics.ins-det

Measurement of isolated prompt photon production in $p$+$p$ collisions at $\sqrt{s} = 200$ GeV with the sPHENIX detector

The differential cross section of isolated prompt photon production is measured as a function of photon transverse energy ($E_{\mathrm{T}}^{\gamma}$) in proton--proton ($p$+$p$) collisions at $\sqrt{s} = 200$ GeV. The data were recorded in $2024$ with the sPHENIX detector at the Relativistic Heavy Ion Collider. Photons are reconstructed in $|\eta^{\gamma}| < 0.7$ and $12 < E_{\mathrm{T}}^{\gamma} < 32$ GeV using the electromagnetic calorimeter, and an isolation requirement is imposed using both the electromagnetic and hadronic calorimeters. The measured cross section is compared with the PYTHIA Monte Carlo event generator and perturbative quantum chromodynamics (pQCD) calculations at next-to-leading and next-to-next-to-leading order. The pQCD calculations are consistent with the result within the quoted uncertainties. This measurement provides a test of pQCD calculations for a process with sensitivity to the gluon parton distribution function of the proton and establishes the $p$+$p$ baseline for forthcoming sPHENIX measurements of isolated prompt photons in heavy-ion collisions.

nucl-ex

Large amplification of the isospin-dependence of proton emitting source size in radioactive heavy-ion collisions: a signal of n-p correlation

We report proton-proton correlation function measurements in central $^{132}$Sn+$^{124}$Sn and $^{108}$Sn+$^{112}$Sn collisions at 270 MeV/nucleon. The proton emitting source sizes are extracted for the systems by using femtoscopic imaging technique. The fast dynamic core radius for the neutron-rich system is found to be $2.22 \pm 0.13\ \text{(stat.)} \pm 0.07\ \text{(syst.)}$ fm, which is approximately 24\% larger than that for the neutron-deficient system, $1.74 \pm 0.08\ \text{(stat.)} \pm 0.05\ \text{(syst.)}$ fm. This difference is an order of magnitude larger than the $\sim$3\% difference in the ground-state charge radii of the projectile nuclei. Transport model simulations based on mean-field dynamics cannot reproduce this amplification. The observation reveals a beyond-mean-field mechanism associated to short-range neutron-proton correlations, which dynamically enhance the proton emitting source in the neutron-rich environment. Our results demonstrate that heavy-ion collisions induced by radioactive beam, combined with femtoscopic precision, provide a new hadronic probe of short-range correlation, and that careful treatment of the beyond-mean-field interactions are required in modeling such processes.

nucl-ex

Impact of the in-medium cross section on cluster spectra in ${}^{40,48}\mathrm{Ca}+{}^{58,64}\mathrm{Ni}$ collisions at $56$ and $140$ $\mathbf{\mathrm{MeV}}/\mathrm{\mathbf{nucleon}}$

Although significant efforts have been made to investigate the density dependence of the nuclear symmetry energy, the influence of the in-medium cross section on particle production in transport models is not well constrained. The in-medium cross section reflects the dynamic situation of the medium such as a nontrivial phase space distribution. In this study, we analyze the transverse momentum spectra of $p$, $d$, $t$, ${}^3{\mathrm{He}}$ and $\alpha$ particles emitted near mid-rapidity in central $^{40,48}\mathrm{Ca}$ + $^{58, 64}\mathrm{Ni}$ reactions at $56$ and $140$ $\mathrm{MeV}/\mathrm{nucleon}$. The Antisymmetrized Molecular Dynamics ($\mathrm{AMD}$) model is chosen as the transport model for data comparison. Central events are selected based on charged-particle multiplicity in both the experimental data and AMD calculations after applying an experimental filter. Our results show that the in-medium nucleon-nucleon scattering cross-sections are more strongly reduced at $56$ $\mathrm{MeV}/\mathrm{nucleon}$ than at $140$ $\mathrm{MeV}/\mathrm{nucleon}$ incident energy.

nucl-th

CMS RPC Non-Physics Event Data Automation Ideology

This paper presents a streamlined framework for real-time processing and analysis of condition data from the CMS experiment Resistive Plate Chambers (RPC). Leveraging data streaming, it uncovers correlations between RPC performance metrics, like currents and rates, and LHC luminosity or environmental conditions. The Java-based framework automates data handling and predictive modeling, integrating extensive datasets into synchronized, query-optimized tables. By segmenting LHC operations and analyzing larger virtual detector objects, the automation enhances monitoring precision, accelerates visualization, and provides predictive insights, revolutionizing RPC performance evaluation and future behavior modeling.

hep-ex

The Ladder and Readout Cables of Intermediate Silicon Strip Detector for sPHENIX

A new silicon-strip-type detector was developed for precise charged-particle tracking in the central rapidity region of heavy ion collisions. A new detector and collaboration at the Relativistic Heavy Ion Collider at Brookhaven National Laboratory is sPHENIX, which is a major upgrade of the PHENIX detector. The intermediate tracker (INTT) is part of the advanced tracking system of the sPHENIX detector complex together with a CMOS monolithic-active-pixel-sensor based silicon-pixel vertex detector, a time-projection chamber, and a micromegas-based detector. The INTT detector is barrel shaped and comprises 56 silicon ladders. Two different types of strip sensors of 78~$\mu m$ pitch and 320~$\mu m$ thick are mounted on each half of a silicon ladder. Each strip sensor is segmented into 8$\times$2 and 5$\times$2 blocks with lengths of 16 and 20 mm. Strips are read out with a silicon strip-readout (FPHX) chip. In order to transmit massive data from the FPHX to the down stream readout electronics card (ROC), a series of long and high speed readout cables were developed. This document focuses on the silicon ladder, the readout cables, and the ROC of the INTT. The radiation hardness is studied for some parts of the INTT devices in the last part of this document, since the INTT employed some materials from the technology frontier of the industry whose radiation hardness is not necessarily well known.

physics.ins-det

A Compact Low-level RF Control System for Advanced Concept Compact Electron Linear Accelerator

A compact low-level RF (LLRF) control system based on RF system-on-chip (RFSoC) technology has been designed for the Advanced Concept Compact Electron Linear-accelerator (ACCEL) program, which has challenging requirements in both RF performance and size, weight and power consumption (SWaP). The compact LLRF solution employs the direct RF sampling technique of RFSoC, which samples the RF signals directly without any analogue up and down conversion. Compared with the conventional heterodyne based architecture used for LLRF system of linear accelerator (LINAC), the elimination of analogue mixers can significantly reduce the size and weight of the system, especially with LINAC requires a larger number of RF channels. Based on the requirements of ACCEL, a prototype LLRF platform has been developed, and the control schemes have been proposed. The prototype LLRF system demonstrated magnitude and phase fluctuation levels below 1% and 1 degree, on the flat top of a 2 microseconds RF pulse. The LLRF control schemes proposed for ACCEL are implemented with a prototype hardware platform. This paper will introduce the new compact LLRF solution and summarize a selection of experimental test results of the prototype itself and with the accelerating structure cavities designed for ACCEL.

physics.acc-ph

Model-independent measurement of isospin diffusion in Ni-Ni systems at intermediate energy

In this work we provide a model-independent experimental evaluation of the degree of isospin equilibration taking place in $^{58,64}$Ni+$^{58,64}$Ni collisions at 32 MeV/nucleon across varying reaction centralities. This result has been obtained by combining the complementary information provided by two different datasets, sharing common characteristics. The first dataset has been acquired with the INDRA setup and has been used to implement a model-independent reconstruction of the impact parameter. The second dataset has been acquired in the first experimental campaign of the coupled INDRA-FAZIA apparatus at GANIL. The neutron-to-proton content of the quasiprojectile remnant measured by FAZIA has been employed as isospin observable. The effect of isospin diffusion has been evidenced by means of the isospin transport ratio, reported as a function of the impact parameter of the collision. The evolution towards isospin equilibration from semiperipheral to more central collisions is clearly extracted. This experimental result, expanding our previous works (Phys. Rev. C 106, 024603 (2022) and Phys. Rev. C 108, 054611 (2023)), can be compared with the predictions of any transport model, and can thus be used to set constraints on the behavior of the symmetry energy term of the nuclear Equation of State at sub- to saturation densities.

nucl-ex

Performance of the prototype beam drift chamber for LAMPS at RAON with proton and Carbon-12 beams

Beam Drift Chamber (BDC) is designed to reconstruct the trajectories of incident rare isotope beams provided by RAON (Rare isotope Accelerator complex for ON-line experiments) into the experimental target of LAMPS (Large Acceptance Multi-Purpose Spectrometer). To conduct the performance test of the BDC, the prototype BDC (pBDC) is manufactured and evaluated with the high energy ion beams from HIMAC (Heavy Ion Medical Accelerator in Chiba) facility in Japan. Two kinds of ion beams, 100 MeV proton, and 200 MeV/u $^{12}$C, have been utilized for this evaluation, and the track reconstruction efficiency and position resolution have been measured as the function of applied high voltage. This paper introduces the construction details and presents the track reconstruction efficiency and position resolution of pBDC.

physics.ins-det

neuSIM4: A comprehensive GEANT4 based neutron simulation code

A new neutron SIMulation program based on the versatile GEANT4 toolkit, neuSIM4, has been developed to describe interactions of neutrons in the NE213 liquid scintillator from 0.1 to 3000 MeV. neuSIM4 is designed to accommodate complicated modern detector geometry setups with multiple scintillator detectors, each of which can be outfitted with more than one photo-multiplier. To address a broad spectrum of neutron energies, two new neutron interaction physics models, KSCIN and NxQMD, have been implemented in GEANT4. For neutrons with energy below 110 MeV, we incorporate a total of eleven neutron induced reaction channels on hydrogen and carbon nuclei, including nine carbon inelastic reaction channels, into KSCIN. Beyond 110 MeV, we implement a neutron induced reaction model, NxQMD, in GEANT4. We use its results as reference to evaluate other neutron-interaction physics models in GEANT4. We find that results from an existing cascade physics model (INCL) in GEANT4 agree very well with the results from NxQMD, and results from both codes agree with new and existing light response data. To connect KSCIN to NxQMD or INCL, we introduce a transition region where the contribution of neuSIM4 linearly decreases with corresponding increased contributions from NxQMD or INCL. To demonstrate the application of the new code, we simulate the light response and performance of a 2 x 2 m2 neutron detector wall array consisting of 25 2m-long scintillation bars. We are able to compare the predicted light response functions to the shape of the experimental response functions and calculate the efficiency of the neutron detector array for neutron energies up to 200 MeV. These simulation results will be pivotal for understanding the performance of modern neutron arrays with intricate geometries, especially in the measurements of neutron energy spectra in heavy-ion reactions.

physics.ins-det

Direct RF Sampling based LLRF Control System for C-band Linear Accelerator

Low Level RF (LLRF) control systems of linear accelerators (LINACs) are typically implemented with heterodyne based architectures, which have complex analog RF mixers for up and down conversion. The Gen 3 Radio Frequency System-on-Chip (RFSoC) device from AMD Xilinx integrates data converters with maximum RF frequency of 6~GHz. This enables direct RF sampling of C-band LLRF signal typically operated at 5.712 GHz without any analogue mixers, which can significantly simplify the system architecture. The data converters sample RF signals in higher order Nyquist zones and then up or down convert digitally by the integrated data path in RFSoC. The closed-loop feedback control firmware implemented in FPGA integrated in RFSoC can process the base-band signal from the ADC data path and calculate the updated phase and amplitude to be up-mixed by the DAC data path. We have developed a C-band LLRF control RFSoC platform with direct RF sampling, which targets Cool Copper Collider (C3) and other C or S band LINAC research and development projects. In this paper, the architecture of the platform will be described. We have optimized the configuration of the data converter and characterized performance of them with RF pulses. The test results for some of the key performance parameters for the LLRF platform with our custom solid-state amplifier, such as phase and amplitude stability, will be discussed in this paper.

physics.acc-ph

Study of quasi-projectile properties at Fermi energies in 48Ca projectile systems

The emission of the pre-equilibrium particles during nuclear collisions at moderate beam energies is still an open question. This influences the properties of the compound nucleus but also changes the interpretation of the quasi-fission process. A systematic analysis of the data obtained by the FAZIA collaboration during a recent experiment with a neutron rich projectile is presented. The full range of charged particles detected in the experiment is within the limit of isotopic resolution of the FAZIA detector. Quasi-projectile (QP) fragments were detected in majority thanks to the forward angular acceptance of the experimental setup which was confirmed by introducing cuts based on the HIPSE event generator calculations. The main goal was to compare the experimental results with the HIPSE simulations after introducing these cuts to investigate the influence of the n-rich entrance channel on the QP fragment properties. More specifically, the lowering of N/Z of QP fragments with beam energy was found to be present since the initial phase of the reaction. Thus, pre-equilibrium emissions might be a possible candidate to explain such an effect.

nucl-ex

Constraining nucleon effective masses with flow and stopping observables from the S$\pi$RIT experiment

Properties of the nuclear equation of state (EoS) can be probed by measuring the dynamical properties of nucleus-nucleus collisions. In this study, we present the directed flow ($v_1$), elliptic flow ($v_2$) and stopping (VarXZ) measured in fixed target Sn + Sn collisions at 270 AMeV with the S$\pi$RIT Time Projection Chamber. We perform Bayesian analyses in which EoS parameters are varied simultaneously within the Improved Quantum Molecular Dynamics-Skyrme (ImQMD-Sky) transport code to obtain a multivariate correlated constraint. The varied parameters include symmetry energy, $S_0$, and slope of the symmetry energy, $L$, at saturation density, isoscalar effective mass, $m_{s}^*/m_{N}$, isovector effective mass, $m_{v}^{*}/m_{N}$ and the in-medium cross-section enhancement factor $\eta$. We find that the flow and VarXZ observables are sensitive to the splitting of proton and neutron effective masses and the in-medium cross-section. Comparisons of ImQMD-Sky predictions to the S$\pi$RIT data suggest a narrow range of preferred values for $m_{s}^*/m_{N}$, $m_{v}^{*}/m_{N}$ and $\eta$.

nucl-ex

Drift Observations and Mitigation in LCLS-II RF

The LCLS-II RF system physically spans ~700m and has strict requirements -- on the order of 20 fs -- on the phase stability of the accelerating RF fields in its SRF linac. While each LLRF rack is crudely temperature-stabilized, the weather inside the service building as a whole is usually compared to a tin shack in the California sun. A phase-averaging reference line is the primary system deployed in support of the phase stability goals. There are other, secondary subsystems (SEL phase offset, and determination of cavity detuning) that are also sensitive to RF phase drift. We present measurements of phase shifts observed in the overall RF system, and how diagnostics are able to sense and correct for them during beam operations.

physics.acc-ph

Measurement of the transverse single-spin asymmetry for forward neutron production in a wide $p_T$ range in polarized $p+p$ collisions at $\sqrt{s} = 510$ GeV

Transverse single-spin asymmetries $A_{\textrm{N}}$ of forward neutrons at pseudorapidities larger than 6 had only been studied in the transverse momentum range of $p_{\textrm{T}} < 0.4$ GeV/$c$. The RHICf Collaboration has extended the previous measurements up to 1.0 GeV/$c$ in polarized $p+p$ collisions at $\sqrt{s}~=~510$GeV, using an electromagnetic calorimeter installed in the zero-degree area of the STAR detector at the Relativistic Heavy Ion Collider. The resulting $A_{\textrm{N}}$s increase in magnitude with $p_{\textrm{T}}$ in the high longitudinal momentum fraction $x_{\textrm{F}}$ range, but reach a plateau at lower $p_{\textrm{T}}$ for lower $x_{\textrm{F}}$. For low transverse momenta the $A_{\textrm{N}}$s show little $x_{\textrm{F}}$ dependence and level off from intermediate values. For higher transverse momenta the $A_{\textrm{N}}$s show also an indication to reach a plateau at increased magnitudes. The results are consistent with previous measurements at lower collision energies, suggesting no $\sqrt{s}$ dependence of the neutron asymmetries. A theoretical model based on the interference of $\pi$ and $a_1$ exchange between two protons could partially reproduce the current results, however an additional mechanism is necessary to describe the neutron $A_{\textrm{N}}$s over the whole kinematic region measured.

nucl-ex

LLRF System Considerations for a Compact, Commercial C-band Accelerator using the AMD Xilinx RF-SoC

This work describes the LLRF and control system in use for a novel accelerator structure developed for a compact design operating in C-band developed by SLAC, with collaboration from RadiaBeam and RadiaSoft. This design is a pulsed RF/pulsed beam system that only provides minimal monitoring for control of each two-cavity pair. Available signals include only a forward and reflected signal for each pair; such a design requires careful consideration of calibration and power-on routines, as well an understanding of how to correct for disturbances caused by the entire RF signal chain, including a new SSA, klystron, and distribution system. An AMD Xilinx RF-SoC with a separate supervisory computer is the LLRF system core, with on-board pulse-to-pulse feedback corrections. This work presents the current status of the project, as well as obstacles and manufacturing plans from the viewpoint of developing for larger-volume manufacturing. This material is based upon work supported by the Defense Advanced Research Projects Agency under Contract Numbers 140D0423C0006 and 140D0423C0007. The views, opinions, and/or findings expressed are those of the author(s) and should not be interpreted as representing the official views or policies of the Department of Defense or the U.S. Government.

physics.acc-ph