Searcharxiv⌕ Search

arXiv subjects

B. I. Bantysh

Publications and source records attributed to B. I. Bantysh.

At least 19 recordsLinked to original sources

Experimental characterization of the Toffoli gate via channel spectrum benchmarking

Channel spectrum benchmarking (CSB) provides a robust framework for characterizing quantum gate fidelities while remaining insensitive to state preparation and measurement (SPAM) errors. Yet, current CSB implementations encounter fundamental challenges when reconstructing noisy eigenvalues, particularly in the presence of spectral degeneracies and off-diagonal noise components in the target gate's eigenbasis. These issues become especially pronounced in the strong noise regime for gates with fidelities around $90\%$. To address these limitations, we introduce an extended CSB model together with a fidelity estimate interval (FEI) -- an interval-valued estimate of the target gate fidelity. Numerical simulation demonstrates that FEI remains sufficiently narrow, with its midpoint reliably approximating the true fidelity. We further validate the protocol on a trapped-ion quantum processor by benchmarking two implementations of the three-qubit Toffoli gate. The results reveal a clear advantage of the qutrit-based implementation over its qubit-based counterpart.

quant-ph↗

Fast reconstruction of programmable interferometers with intensity-only measurements

Programmable linear optical interferometers are promising for classical and quantum applications. Their integrated design makes it possible to create more scalable and stable devices. To use them in practice, one has to reconstruct the whole device model taking the manufacturing errors into account. The inability to address individual interferometer elements complicates the reconstruction problem. A naive approach is to train the model via some complex optimization procedure. A faster optimization-free algorithm has been recently proposed [Opt. Express 31, 16729 (2023)]. However, it requires the full transfer matrix tomography while a more practical setup measures only the fields intensities at the interferometer output. In this paper, we propose the modification of the fast algorithm, which uses additional set of interferometer configurations in order to reconstruct the model in the case of intensity-only measurements. We show that it performs slightly worse than the original fast algorithm but it is more practical and still does not require intensive numerical optimization.

quant-ph↗

Entropic property of randomized QAOA circuits

Quantum approximate optimization algorithm (QAOA) aims to solve discrete optimization problems by sampling bitstrings using a parameterized quantum circuit. The circuit parameters (angles) are optimized in the way that minimizes the cost Hamiltonian expectation value. Recently, general statistical properties of QAOA output probability distributions have begun to be studied. In contrast to the conventional approach, we analyse QAOA circuits with random angles. We provide analytical equations for probabilities and the numerical evidence that for unweighted Max-Cut problems on connected graphs such sampling always gives higher entropy of energy distribution than uniform random sampling of bitstrings. We also analyse the probability to obtain the global optima, which appears to be higher on average than for random sampling.

quant-ph↗

Fast reconstruction of programmable integrated interferometers

Programmable linear optical interferometers are important for classical and quantum information technologies, as well as for building hardware-accelerated artificial neural networks. Recent results showed the possibility of constructing optical interferometers that could implement arbitrary transformations of input fields even in the case of high manufacturing errors. The building of detailed models of such devices drastically increases the efficiency of their practical use. The integral design of interferometers complicates its reconstruction since the internal elements are hard to address. This problem can be approached by using optimization algorithms [Opt. Express 29, 38429 (2021)]. In this paper, we present a novel efficient algorithm based on linear algebra only, which does not use computationally expensive optimization procedures. We show that this approach makes it possible to perform fast and accurate characterization of high-dimensional programmable integrated interferometers. Moreover, the method provides access to the physical characteristics of individual interferometer layers.

physics.optics↗

High-precision tomography of ion qubits based on registration of fluorescent photons

We develop a new method for high-precision tomography of ion qubit registers under conditions of limited distinguishability of its logical states. It is not always possible to achieve low error rates during the readout of the quantum states of ion qubits due to the finite lifetime of excited levels, photon scattering, dark noise, low numerical aperture, etc. However, the model of fuzzy quantum measurements makes it possible to ensure precise tomography of quantum states. To do this, we developed a fuzzy measurement model based on counting the number of fluorescent photons. A statistically adequate algorithm for the reconstruction of quantum states of ion qubit registers based on fuzzy measurement operators is proposed. The algorithm uses the complete information available in the experiment and makes it possible to account for systematic measurement errors associated with the limited distinguishability of the logical states of ion qubits. We show that the developed model, although computationally more complex, contains significantly more information about the state of the qubit and provides a higher accuracy of state reconstruction compared to the model based on the threshold algorithm.

quant-ph↗

Quantum tomography for quantum systems optimization

Debugging quantum states transformations is an important task of modern quantum computing. The use of quantum tomography for these purposes significantly expands the range of possibilities. However, the presence of preparation and measurement errors complicates the practical use of this procedure. In this work, we investigate the possibility of estimating these errors from experiment. These estimates are subsequently used to build a robust quantum tomography model. The model allows one to accurately reconstruct unitary errors of single-qubit gates. We show that, having such imperfect single-qubit gates with pre-estimated errors, one can obtain transformations close to ideal ones. A similar approach can also significantly mitigate single-qubit gates cross-talk.

quant-ph↗

High-fidelity tomography of fluorescent ion qubits under conditions of limited discrimination between bright and dark levels

The present work is devoted to the development of a method for high-precision tomography of ion qubit registers under conditions of limited distinguishability of the states of a logical value 0 and a logical value 1. In the considered ion qubits, the identification of the quantum state is achieved by measuring the fluorescence of the ion by repeated excitation of the cyclic transition, which includes only the lower energy state that sets a logical value 0 and becomes bright, but does not include the upper metastable state that remains dark and sets logical value 1. It is important to note that it is not always possible to achieve low levels of registration errors due to the finite lifetime of excited levels, photon scattering, dark noise, low numerical aperture values, etc. However, even under such conditions, with use of the model of fuzzy quantum measurements, it is possible to provide precise control of quantum states. We show that a model that is characterized by relatively high levels of errors under conditions, where we have a reliable statistical model of their occurrence, is more accurate than the case when the considered errors are small, but we do not have an adequate statistical model for the occurrence of these errors. In the given illustrative examples, we show that the factor of reducing the loss of accuracy with the use of the model of fuzzy measurements can reach values of the order of 1000 or more in comparison with standard measurements. The obtained results are essential for the development of high-precision methods for controlling the technology of quantum computing on the ion platform.

quant-ph↗

Comparative analysis of various protocols for high-precision tomography of qudits

Quantum tomography is an important tool for obtaining information about the quantum state from experimental data. In this study, we conduct a comparative analysis of various quantum tomography protocols, including protocols based on highly symmetric sets of state vectors, on mutually unbiased bases (MUB), and two-level transformations. Using the universal distribution for the fidelity of quantum state tomography, we estimate the fidelity and efficiency of quantum measurements for qudits of various dimensions as applied to a set of random states uniformly distributed over the Haar measure.

quant-ph↗

Measurement of polarization quantum states under chromatic aberration conditions

The wave plate is a basic device for transforming and measuring the polarization states of light. It is known that the transformation of light by means of two wave plates makes it possible to measure the state of polarization in an arbitrary basis. The finite spectral width of the light, however, leads to a chromatic aberration of the polarization quantum transformation caused by the parasitic dispersion of the birefringence of the plate material. This causes systematic errors in the tomography of quantum polarization states and significantly reduces its accuracy. This study is a development of our work1, in which an adequate model for quantum measurements of polarization qubits under chromatic aberration was first formulated. This work includes a generalization of the results obtained earlier for the cases of two-qubit states. Along with examples of random states those uniformly distributed over the Haar measure are considered. Using a matrix of complete information, it is quantitatively traced how the presence of chromatic aberrations under conditions of a finite spectral width of light leads to the loss of information in quantum measurements. It is shown that the use of the developed model of fuzzy measurements instead of the model of standard projection measurements makes it possible to suppress systematic errors of quantum tomography even when using high-order wave plates. It turns out that the fuzzy measurement model can give a significant increase in the reconstruction accuracy compared to the standard measurement model.

quant-ph↗

Quantum tomography benchmarking

Recent advances in quantum computers and simulators are steadily leading us towards full-scale quantum computing devices. Due to the fact that debugging is necessary to create any computing device, quantum tomography (QT) is a critical milestone on this path. In practice, the choice between different QT methods faces the lack of comparison methodology. Modern research provides a wide range of QT methods, which differ in their application areas, as well as experimental and computational complexity. Testing such methods is also being made under different conditions, and various efficiency measures are being applied. Moreover, many methods have complex programming implementations; thus, comparison becomes extremely difficult. In this study, we have developed a general methodology for comparing quantum state tomography methods. The methodology is based on an estimate of the resources needed to achieve the required accuracy. We have developed a software library (in MATLAB and Python) that makes it easy to analyze any QT method implementation through a series of numerical experiments. The conditions for such a simulation are set by the number of tests corresponding to real physical experiments. As a validation of the proposed methodology and software, we analyzed and compared a set of QT methods. The analysis revealed some method-specific features and provided estimates of the relative efficiency of the methods.

quant-ph↗

Statistical parameter estimation of multimode multiphoton subtracted thermal states of light

Thermal states of light are widely used in quantum optics for various quantum phenomena testing. Particularly, they can be utilized for characterization of photon creation and photon annihilation operations. During the last decade the problem of photon subtraction from multimode quantum states become of much significance. Therefore, in this work we present a technique for statistical parameter estimation of multimode multiphoton subtracted thermal states of light, which can be used for multimode photon annihilation test.

quant-ph↗

Quantum tomography of noisy ion-based qudits

Quantum tomography makes it possible to obtain comprehensive information about certain logical elements of a quantum computer. In this regard, it is a promising tool for debugging quantum computers. The practical application of tomography, however, is still limited by systematic measurement errors. Their main source are errors in the quantum state preparation and measurement procedures. In this work, we investigate the possibility of suppressing these errors in the case of ion-based qudits. First, we will show that one can construct a quantum measurement protocol that contains no more than a single quantum operation in each measurement circuit. Such a protocol is more robust to errors than the measurements in mutually unbiased bases, where the number of operations increases in proportion to the square of the qudit dimension. After that, we will demonstrate the possibility of determining and accounting for the state initialization and readout errors. Together, the measures described can significantly improve the accuracy of quantum tomography of real ion-based qudits.

quant-ph↗

Precise tomography of optical polarization qubits under conditions of chromatic aberration of quantum transformations

In this work we present an algorithm of building an adequate model of polarizing quantum state measurement. This model takes into account chromatic aberration of the basis change transformation caused by the parasitic dispersion of the wave plates crystal and finite radiation spectral bandwidth. We show that the chromatic aberration reduces the amount of information in the measurements results. Using the information matrix approach we estimate the impact of this effect on the qubit state reconstruction fidelity for different values of sample size and spectral bandwidth. We also demonstrate that our model outperforms the standard model of projective measurements as it could suppress systematic errors of quantum tomography even when one performs the measurements using wave plates of high order.

quant-ph↗

Machine learning methods in quantum computing theory

Classical machine learning theory and theory of quantum computations are among of the most rapidly developing scientific areas in our days. In recent years, researchers investigated if quantum computing can help to improve classical machine learning algorithms. The quantum machine learning includes hybrid methods that involve both classical and quantum algorithms. Quantum approaches can be used to analyze quantum states instead of classical data. On other side, quantum algorithms can exponentially improve classical data science algorithm. Here, we show basic ideas of quantum machine learning. We present several new methods that combine classical machine learning algorithms and quantum computing methods. We demonstrate multiclass tree tensor network algorithm, and its approbation on IBM quantum processor. Also, we introduce neural networks approach to quantum tomography problem. Our tomography method allows us to predict quantum state excluding noise influence. Such classical-quantum approach can be applied in various experiments to reveal latent dependence between input data and output measurement results.

quant-ph↗

The concept of weak measurements and the super-efficiency of quantum tomography

The quantum measurement procedure based on the Lorentz transformation formalism and weak perturbation of the system is considered. In the simple case of a single-qubit it turns out that one can perform 4-dimension pseudo-rotation along with ordinary 3-dimension rotations on the Bloch sphere. These pseudo-rotations are similar to the Lorentz transformation in special relativity theory. The extension of the Lorentz transformation for many-qubit systems is also considered. The quantum measurement protocols based on the Lorentz transformation are proposed. It has been shown that these protocols cease to form the decomposition of unity and could be superefficient providing the fidelity higher than any POVM-measurement protocol. However, one can perform the complement of the Lorentz protocol to POVM-protocol by an additional measurement operator. If the initial mixed state is close to the pure one this operator corresponds to weak perturbation of the state while the original Lorentz protocol sets the strong perturbations. As the result, the feedback provides an effective control of a quantum system introducing weak perturbations to the quantum state. The results of this research are essential for the development of methods for the control of quantum information technologies.

quant-ph↗

Quantum tomography based on principles of completeness, adequacy and fidelity

In this report we present a general approach for estimating quantum circuits by means of measurements. We apply the developed general approach for estimating the quality of superconducting and optical quantum chips. Using the methods of quantum states and processes tomography developed in our previous works, we have defined the adequate models of the states and processes under consideration.

quant-ph↗

High-fidelity quantum tomography with imperfect measurements

In the current work we address the problem of quantum process tomography (QPT) in the case of imperfect preparation and measurement of the states which are used for QPT. The fuzzy measurements approach which helps us to efficiently take these imperfections into account is considered. However, to implement such a procedure one should have a detailed information about the errors. An approach for obtaining the partial information about them is proposed. It is based on the tomography of the ideal identity gate. This gate could be implemented by performing the measurement right after the initial state preparation. By using the result of the identity gate tomography we were able to significantly improve further QPT procedures. The proposed approach has been tested experimentally on the IBM superconducting quantum processor. As a result, we have obtained an increase in fidelity from 89% to 98% for Hadamard transformation and from 77% to 95% for CNOT gate.

quant-ph↗

The influence of quantum noise on the Grover algorithm and quantum Fourier transform: quantum operations theory approach

The method of noisy multiqubit quantum circuits modeling is proposed. The analytical formulas for the dependence of quantum algorithms accuracy on qubits count and noise level are obtained for Grover algorithm and quantum Fourier transform. It is shown that the proposed approach is very much in line with results obtained by Monte Carlo statistical modeling method. The developed theory makes it possible to predict the influence of quantum noise on the accuracy of the forward-looking multiqubit quantum systems under development.

quant-ph↗