arXiv subjects

B. J. Kooi

Publications and source records attributed to B. J. Kooi.

8 recordsLinked to original sources

arXiv2022

Ultrathin, sputter-deposited, amorphous alloy films of ruthenium and molybdenum

Microscopy and diffraction measurements are presented of ultrathin binary alloy films of ruthenium and molybdenum that are obtained by standard sputter deposition. For compositions close to Ru50Mo50, we find the films to be amorphous. The amorphicity of the films is accompanied by a significant reduction of the roughness with respect to the roughness of equally thick films of either ruthenium or molybdenum. We ascribe this to the absence of the grain structure that is characteristic of the polycrystalline films of the separate elements.

cond-mat.mtrl-sci↗

arXiv2013

Sensitivity of micromechanical actuation on amorphous to crystalline phase transformations under the influence of Casimir forces

Amorphous to crystalline phase transitions in phase change materials (PCM) can have strong influence on the actuation of microelectromechanical systems under the influence of Casimir forces. Indeed, the bifurcation curves of the stationary equilibrium points and the corresponding phase portraits of the actuation dynamics between gold and AIST PCM, where an increase of the Casimir force of up ~25% has been measured upon crystallization, show strong sensitivity to changes of the Casimir force as the stiffness of the actuating component decreases and/or the effective interaction area of the Casimir force increases, which can also lead to stiction. However, introduction of intrinsic energy dissipation (associated with a finite quality factor of the actuating system) can prevent stiction by driving the system to attenuated motion towards stable equilibrium depending on the PCM state and the system quality factor.

cond-mat.mtrl-sci↗

arXiv2010

Influence of random roughness on cantilever curvature sensitivity

In this work we explore the influence of random surface roughness on the cantilever sensitivity to respond to curvature changes induced by changes in surface stress. The roughness is characterized by the out-of-plane roughness amplitude w, the lateral correlation length x, and the roughness or Hurst exponent H (0<H<1). The cantilever sensitivity is found to decrease with increasing roughness (decreasing H and/or increasing ratio w/x) or equivalently increasing local surface slope. Finally, analytic expressions of the cantilever sensitivity as a function of the parameters w, x, and H are derived in order to allow direct implementation in sensing systems.

cond-mat.mes-hall↗

arXiv2009

Mg/Ti multilayers: structural, optical and hydrogen absorption properties

Mg-Ti alloys have uncommon optical and hydrogen absorbing properties, originating from a "spinodal-like" microstructure with a small degree of chemical short-range order in the atoms distribution. In the present study we artificially engineer short-range order by depositing Pd-capped Mg/Ti multilayers with different periodicities and characterize them both structurally and optically. Notwithstanding the large lattice parameter mismatch between Mg and Ti, the as-deposited metallic multilayers show good structural coherence. Upon exposure to H2 gas a two-step hydrogenation process occurs, with the Ti layers forming the hydride before Mg. From in-situ measurements of the bilayer thickness L at different hydrogen pressures, we observe large out-of-plane expansions of the Mg and Ti layers upon hydrogenation, indicating strong plastic deformations in the films and a consequent shortening of the coherence length. Upon unloading at room temperature in air, hydrogen atoms remain trapped in the Ti layers due to kinetic constraints. Such loading/unloading sequence can be explained in terms of the different thermodynamic properties of hydrogen in Mg and Ti, as shown by diffusion calculations on a model multilayered systems. Absorption isotherms measured by hydrogenography can be interpreted as a result of the elastic clamping arising from strongly bonded Mg/Pd and broken Mg/Ti interfaces.

cond-mat.mtrl-sci↗

arXiv2009

Tuning the atomic and domain structure of epitaxial films of multiferroic BiFeO3

Recent works have shown that the domain walls of room-temperature multiferroic BiFeO3 (BFO) thin films can display distinct and promising functionalities. It is thus important to understand the mechanisms underlying domain formation in these films. High-resolution x-ray diffraction and piezo-force microscopy, combined with first-principles simulations, have allowed us to characterize both the atomic and domain structure of BFO films grown under compressive strain on (001)-SrTiO3, as a function of thickness. We derive a twining model that describes the experimental observations and explains why the 71o domain walls are the ones commonly observed in these films. This understanding provides us with a new degree of freedom to control the structure and, thus, the properties of BiFeO3 thin films.

cond-mat.mtrl-sci↗

arXiv2009

Epitaxial TbMnO3 thin films on SrTiO3 substrates: A structural study

TbMnO$_{3}$ films have been grown under compressive strain on (001)-oriented SrTiO$_{3}$ crystals. They have an orthorhombic structure and display the (001) orientation. With increasing thickness, the structure evolves from a more symmetric (tetragonal) to a less symmetric (bulk-like orthorhombic) structure, while keeping constant the in-plane compression thereby leaving the out-of-plane lattice spacing unchanged. The domain microstructure of the films is also revealed, showing an increasing number of orthorhombic domains as the thickness is decreased: we directly observe ferroelastic domains as narrow as 4nm. The high density of domain walls may explain the induced ferromagnetism observed in the films, while both the decreased anisotropy and the small size of the domains could account for the absence of a ferroelectric spin spiral phase.

cond-mat.mtrl-sci↗

arXiv2008

The annealing mechanism of AuGe/Ni/Au ohmic contacts to a two-dimensional electron gas in GaAs/AlGaAs heterostructures

Ohmic contacts to a two-dimensional electron gas (2DEG) in GaAs/AlGaAs heterostructures are often realized by annealing of AuGe/Ni/Au that is deposited on its surface. We studied how the quality of this type of ohmic contact depends on the annealing time and temperature, and how optimal parameters depend on the depth of the 2DEG below the surface. Combined with transmission electron microscopy and energy-dispersive X-ray spectrometry studies of the annealed contacts, our results allow for identifying the annealing mechanism and proposing a model that can predict optimal annealing parameters for a certain heterostructure.

cond-mat.mtrl-sci↗

arXiv2008

Magnetic and dielectric properties of YbMnO3 perovskite thin films

Metastable manganite perovskites displaying the antiferromagnetic so-called E-phase are predicted to be multiferroic. Due to the need of high-pressures for the synthesis of this phase, this prediction has only been confirmed in bulk HoMnO3. Here we report on the growth and characterization of YbMnO3 perovskite thin films grown under epitaxial strain. Highly-oriented thin films, with thickness down to ~30nm, can be obtained showing magneto-dielectric coupling and magnetic responses as those expected for the E-phase. We observe that the magnetic properties depart from the bulk behavior only in the case of ultrathin films (d< 30nm), which display a glassy magnetic behavior. We show that strain effects alone cannot account for this difference and that the film morphology plays, instead, a crucial role.

cond-mat.mtrl-sci↗