arXiv subjects

B. Lindberg

Publications and source records attributed to B. Lindberg.

3 recordsLinked to original sources

arXiv2026

Operating the Fabry-P\'erot systems of the European Solar Telescope in multi-aperture mode

We discuss how to optimise the science output of the European Solar Telescope (EST), when used without the wide-field compensation for high-altitude seeing that the EST multi conjugate adaptive optics (MCAO) will offer. This will be the mode of operating EST during its first year(s). Without MCAO, the spatial resolution of a much smaller telescope could surpass that of EST. We therefore propose to operate EST in multi-aperture mode, by optically segmenting the 4.2 m aperture into six 1.4 m subapertures, until MCAO is operational. Operating at smaller aperture diameter pushes down the root mean square wavefront errors from the high altitude seeing to levels that can more reliably be compensated for in restored images using post processing methods. This will significantly improve image quality. In particular, the multi-aperture mode will provide the sustained stable high image quality needed for obtaining time sequences of spectropolarimetric data. The multi-aperture mode is implemented with low-cost modifications of the camera lenses of the three Fabry-Perot systems that will be used to cover the wavelength range 380--860~nm. Switching between the full-aperture and multi-aperture modes can be done quickly and independently for the three FPI systems. This allows flexible optimisation of EST, taking into account that the seeing is much better at long wavelengths than at short wavelengths, without any impact on the EST primary or secondary optical systems or on the actual FPI systems. The multi-aperture addition to EST provides a powerful and flexible option that has the potential of significantly improving the quality and amount of its science data before MCAO is operational. In this publication, we perform simulations and image reconstructions of simulated data to demonstrate the benefits of the multi-aperture option, and provide a simple optical design to demonstrate its feasibility.

astro-ph.IM↗

arXiv2025

The making of robust and highly performing imaging spectropolarimeters for large solar telescopes

We discuss the requirements, concepts, simulations, implementation, and calibration of two dual Fabry-Perot based imaging spectropolarimeters, CRISP and CHROMIS, at the Swedish 1-meter Solar Telescope, and CRISP2 that is under construction. These instruments use a combination of a high-resolution and a low-resolution etalon together with an order-sorting prefilter to define the bandpass. The overall design is made robust and stable by tailoring the low-resolution etalon reflectivity to accommodate expected cavity errors from both etalons, and by using a compact optical design that eliminates the need for folding mirrors. By using a telecentric design based on lenses rather than mirrors, image degradation by the FPI system is negligible, as shown in a previous publication, and the throughput of the system is maximised. Initial alignment, and maintaining that alignment over time, is greatly simplified. The telecentric design allows full calibration and/or modelling of essential system parameters to be carried out without interfering with the optical setup. We also discuss briefly the polarimeters developed for CRISP and CHROMIS. The high performance of CRISP and CHROMIS has been demonstrated in an earlier publication through measurements of the granulation contrast and comparisons with similar measurements simultaneously made through broadband continuum filters. Here, we focus on the aspects of the design that are central to enabling high performance and robustness, but also discuss the calibration and processing of the data, and use a few examples of processed data to demonstrate the achievable image and data quality. We put forward a proposal for a similar conceptual design for the European Solar Telescope and conclude by discussing potential problems of the proposed approach to designs of this type. Some aspects of these FPI systems may be of interest also outside the solar community.

astro-ph.IM↗

arXiv2023

The 85-electrode AO system of the Swedish 1-m Solar Telescope

We discuss the chosen concepts, detailed design, implementation and calibration of the 85-electrode adaptive optics (AO) system of the Swedish 1-meter Solar Telescope (SST), which was installed in 2013. The AO system is unusual by using a combination of a monomorph mirror with a Shack-Hartmann (SH) wavefront sensor (WFS), and by using a second high-resolution SH microlens array to aid the DM characterization, calibration, and modal control. An Intel PC workstation performs the heavy image processing associated with cross correlations and real-time control at 2 kHz update rate with very low latency. The computer and software continue the successful implementation since 1995 of earlier generations of correlation tracker and AO systems at SST and its predecessor SVST by relying entirely on work station technology and an extremely efficient algorithm for implementing cross correlations with the large field-of-view of the WFS. We describe critical aspects of the design, calibrations, software and functioning of the AO system. The exceptionally high performance is testified through the highest Strehl ratio (inferred from the measured granulation contrast) of existing meter-class solar telescopes, as demonstrated here at wavelengths shorter than 400 nm and discussed in more detail in a separate publication by Scharmer et al. We expect that some aspects of this AO system may be of interest also outside the solar community.

astro-ph.IM↗