arXiv subjects

B. Maffei

Publications and source records attributed to B. Maffei.

At least 19 recordsLinked to original sources

arXiv2026

Proof of concept of the COSMOCal project at the IRAM 30m telescope

This work reports on a test campaign conducted at the IRAM 30m telescope to validate the COSMOCal instrument, a novel concept for absolute calibration of polarization angle, beam properties, and instrumental efficiency. The development is motivated by the stringent calibration requirements of current and next-generation Cosmic Microwave Background (CMB) experiments, whose goal is the precise measurement of CMB polarization. Such measurements are essential to probe fundamental physics, including the possible imprint of primordial inflation. The COSMOCal concept is designed as a space-borne calibration reference intended to provide a stable and absolute polarized signal observable simultaneously by multiple large-aperture ground-based observatories. Prior to any space deployment, a terrestrial prototype was developed and characterized in the laboratory, as reported in Ritacco et al. 2024. The results presented here describe the first validation of the system coupled to an antenna, carried out at the IRAM 30m telescope in September 2024. This campaign aimed at assessing the performance of the full instrument under realistic observational conditions, including its ability to reconstruct polarization observables and interface with a state-of-the-art millimeter-wave polarimeter.

astro-ph.IM↗

arXiv2026

LiteBIRD Mission Overview after Mission Reformation

LiteBIRD is a JAXA-led space mission designed to produce all-sky microwave polarization maps. Its primary science goal is to test representative inflationary models by measuring the cosmic microwave background $B$-mode polarization generated by primordial gravitational waves, while also providing new insights into cosmology, particle physics, and astrophysics. The mission concept has been updated following the reformation activities initiated after the Mission Definition Review in 2024. The current concept preserves the central scientific objectives, while simplifying the payload configuration: a single telescope covers 12 frequency bands with band centers spanning 40 to 402~GHz, corresponding to an optical coverage of 34--448~GHz. The telescope is a cross-Dragone reflector with a 500~mm aperture diameter, cooled to approximately 5~K and coupled to transition-edge-sensor bolometer arrays operated at 0.1~K. LiteBIRD will observe from a Lissajous orbit around the Sun--Earth L2 point during a nominal 3-year survey. More specifically, the primary scientific objective is to achieve total uncertainty in the tensor-to-scalar ratio of $\delta r < 0.002$ (68\% C.L.), including contributions from foreground residuals, statistical uncertainties, instrumental systematics, and margin contingency. The corresponding map-noise requirements are specified separately for the low-, mid-, and high-frequency ranges over the reionization and recombination multipole ranges. This sensitivity makes LiteBIRD unique not only for inflationary science but also for a broad range of scientific investigations probing the history of both the early and late Universe, as well as for astrophysical processes, including Galactic science. This paper summarizes the scientific objectives, updated payload and instrument concepts, observation strategy, and ground segment plans.

astro-ph.IM↗

arXiv2026

Status of the COSmological Microwave Observations CALibrator

As the sensitivity of CMB telescopes increases, the need for precise calibration becomes critical. Started in 2022, the COSMOCal project aims to place an artificial polarized source in geostationary orbit, which will serve as a reference for CMB telescopes. This source will emit at 90, 150 and 270 GHz and will be linearly polarized with a highly precise orientation smaller than 0.1 deg. This proceeding presents the scientific motivations for the project, the current status of the development of the instrument and the results of a calibration campaign performed in March 2026 at the Institut d'Astrophysique Spatiale.

astro-ph.IM↗

arXiv2026

Effect of total dose proton irradiation on the performance of Kinetic Inductance Detectors for far-Infrared space observatory

Kinetic Inductance Detectors (KIDs) are a promising technology for future space missions, where exposure to high-energy particles may affect detector performance. In this work, we irradiated two types of KID arrays, absorber coupled and antenna coupled, with high-energy protons at 120 mK. We used a total dose equivalent to approximately 10 years of operation at the L2 Lagrange point. A comparison between pre-irradiation and post-irradiation measurements (24 hours after a 5.7 krad total dose) was done, while keeping the detectors at 120 mK. We find that there is no significant change in the quasi-particle lifetime {\tau}_qp and the dark responsivity d{\theta}/dPdark, but we do observe an increase in the noise and NEP that is tentatively attributed to limitations in the post radiation data analysis.

physics.ins-det↗

arXiv2025

TES Proton Irradiation Result Analysis for Future Space Applications

As observed on the signal of the Planck-HFI highly sensitive bolometers, the effect of cosmic rays on detectors is a major concern for future similar space missions. Their instruments will have a larger detection surface, increased sensitivity, and more stringent requirements on the suppression of systematic effects. To study the impact of cosmic rays on detector prototypes in operational conditions, IAS has designed a state-of-the-art cryogenic system to irradiate particles by coupling this facility to particle accelerators. An irradiation campaign has been carried out on LiteBIRD-HFT TES prototypes to study their response to particle hits. In this article, we present the results and the analysis of this first test campaign.

physics.ins-det↗

arXiv2025

First release of LiteBIRD simulations from an end-to-end pipeline

The LiteBIRD satellite mission aims at detecting Cosmic Microwave Background $B$ modes with unprecedented precision, targeting a total error on the tensor-to-scalar ratio $r$ of $\delta r \sim 0.001$. Operating from the L2 Lagrangian point of the Sun-Earth system, LiteBIRD will survey the full sky across 15 frequency bands (34 to 448 GHz) for 3 years.The current LiteBIRD baseline configuration employs 4508 detectors sampling at 19.1 Hz to achieve an effective polarization sensitivity of $ 2 \mu\mathrm{K-arcmin}$ and an angular resolution of 31 arcmin (at 140 GHz).We describe the first release of the official LiteBIRD simulations, realized with a new simulation pipeline developed using the LiteBIRD Simulation Framework, see https://github.com/litebird/litebird_sim . This pipeline generates 500 full-sky simulated maps at a Healpix resolution of nside=512. The simulations include also one year of Time Ordered Data for approximately one-third of LiteBIRD's total detectors.

astro-ph.IM↗

arXiv2025

A Simulation Framework for the LiteBIRD Instruments

LiteBIRD, the Lite (Light) satellite for the study of $B$-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission focused on primordial cosmology and fundamental physics. In this paper, we present the LiteBIRD Simulation Framework (LBS), a Python package designed for the implementation of pipelines that model the outputs of the data acquisition process from the three instruments on the LiteBIRD spacecraft: LFT (Low-Frequency Telescope), MFT (Mid-Frequency Telescope), and HFT (High-Frequency Telescope). LBS provides several modules to simulate the scanning strategy of the telescopes, the measurement of realistic polarized radiation coming from the sky (including the Cosmic Microwave Background itself, the Solar and Kinematic dipole, and the diffuse foregrounds emitted by the Galaxy), the generation of instrumental noise and the effect of systematic errors, like pointing wobbling, non-idealities in the Half-Wave Plate, et cetera. Additionally, we present the implementation of a simple but complete pipeline that showcases the main features of LBS. We also discuss how we ensured that LBS lets people develop pipelines whose results are accurate and reproducible. A full end-to-end pipeline has been developed using LBS to characterize the scientific performance of the LiteBIRD experiment. This pipeline and the results of the first simulation run are presented in Puglisi et al. (2025).

astro-ph.IM↗

arXiv2025

On the computational feasibility of Bayesian end-to-end analysis of LiteBIRD simulations within Cosmoglobe

We assess the computational feasibility of end-to-end Bayesian analysis of the JAXA-led LiteBIRD experiment by analysing simulated time ordered data (TOD) for a subset of detectors through the Cosmoglobe and Commander3 framework. The data volume for the simulated TOD is 1.55 TB, or 470 GB after Huffman compression. From this we estimate a total data volume of 238 TB for the full three year mission, or 70 TB after Huffman compression. We further estimate the running time for one Gibbs sample, from TOD to cosmological parameters, to be approximately 3000 CPU hours. The current simulations are based on an ideal instrument model, only including correlated 1/f noise. Future work will consider realistic systematics with full end-to-end error propagation. We conclude that these requirements are well within capabilities of future high-performance computing systems.

astro-ph.IM↗

arXiv2024

Multi-dimensional optimisation of the scanning strategy for the LiteBIRD space mission

Large angular scale surveys in the absence of atmosphere are essential for measuring the primordial $B$-mode power spectrum of the Cosmic Microwave Background (CMB). Since this proposed measurement is about three to four orders of magnitude fainter than the temperature anisotropies of the CMB, in-flight calibration of the instruments and active suppression of systematic effects are crucial. We investigate the effect of changing the parameters of the scanning strategy on the in-flight calibration effectiveness, the suppression of the systematic effects themselves, and the ability to distinguish systematic effects by null-tests. Next-generation missions such as LiteBIRD, modulated by a Half-Wave Plate (HWP), will be able to observe polarisation using a single detector, eliminating the need to combine several detectors to measure polarisation, as done in many previous experiments and hence avoiding the consequent systematic effects. While the HWP is expected to suppress many systematic effects, some of them will remain. We use an analytical approach to comprehensively address the mitigation of these systematic effects and identify the characteristics of scanning strategies that are the most effective for implementing a variety of calibration strategies in the multi-dimensional space of common spacecraft scan parameters. We also present Falcons, a fast spacecraft scanning simulator that we developed to investigate this scanning parameter space.

astro-ph.IM↗

arXiv2024

LiteBIRD Science Goals and Forecasts. Mapping the Hot Gas in the Universe

We assess the capabilities of the LiteBIRD mission to map the hot gas distribution in the Universe through the thermal Sunyaev-Zeldovich (SZ) effect. Our analysis relies on comprehensive simulations incorporating various sources of Galactic and extragalactic foreground emission, while accounting for specific instrumental characteristics of LiteBIRD, such as detector sensitivities, frequency-dependent beam convolution, inhomogeneous sky scanning, and $1/f$ noise. We implement a tailored component-separation pipeline to map the thermal SZ Compton $y$-parameter over 98% of the sky. Despite lower angular resolution for galaxy cluster science, LiteBIRD provides full-sky coverage and, compared to the Planck satellite, enhanced sensitivity, as well as more frequency bands to enable the construction of an all-sky $y$-map, with reduced foreground contamination at large and intermediate angular scales. By combining LiteBIRD and Planck channels in the component-separation pipeline, we obtain an optimal $y$-map that leverages the advantages of both experiments, with the higher angular resolution of the Planck channels enabling the recovery of compact clusters beyond the LiteBIRD beam limitations, and the numerous sensitive LiteBIRD channels further mitigating foregrounds. The added value of LiteBIRD is highlighted through the examination of maps, power spectra, and one-point statistics of the various sky components. After component separation, the $1/f$ noise from LiteBIRD is effectively mitigated below the thermal SZ signal at all multipoles. Cosmological constraints on $S_8=\sigma_8\left(\Omega_{\rm m}/0.3\right)^{0.5}$ obtained from the LiteBIRD-Planck combined $y$-map power spectrum exhibits a 15% reduction in uncertainty compared to constraints from Planck alone. This improvement can be attributed to the increased portion of uncontaminated sky available in the LiteBIRD-Planck combined $y$-map.

astro-ph.CO↗

arXiv2024

The LiteBIRD mission to explore cosmic inflation

LiteBIRD, the next-generation cosmic microwave background (CMB) experiment, aims for a launch in Japan's fiscal year 2032, marking a major advancement in the exploration of primordial cosmology and fundamental physics. Orbiting the Sun-Earth Lagrangian point L2, this JAXA-led strategic L-class mission will conduct a comprehensive mapping of the CMB polarization across the entire sky. During its 3-year mission, LiteBIRD will employ three telescopes within 15 unique frequency bands (ranging from 34 through 448 GHz), targeting a sensitivity of 2.2\,$\mu$K-arcmin and a resolution of 0.5$^\circ$ at 100\,GHz. Its primary goal is to measure the tensor-to-scalar ratio $r$ with an uncertainty $\delta r = 0.001$, including systematic errors and margin. If $r \geq 0.01$, LiteBIRD expects to achieve a $>5\sigma$ detection in the $\ell=$2-10 and $\ell=$11-200 ranges separately, providing crucial insight into the early Universe. We describe LiteBIRD's scientific objectives, the application of systems engineering to mission requirements, the anticipated scientific impact, and the operations and scanning strategies vital to minimizing systematic effects. We will also highlight LiteBIRD's synergies with concurrent CMB projects.

astro-ph.IM↗

arXiv2024

Absolute reference for microwave polarization experiments -- The COSMOCal project and its proof of concept

The cosmic microwave background (CMB), a remnant of the Big Bang, provides unparalleled insights into the primordial universe, its energy content, and the origin of cosmic structures. The success of forthcoming terrestrial and space experiments hinges on meticulously calibrated data. Specifically, the ability to achieve an absolute calibration of the polarization angles with a precision of < 0.1 deg is crucial to identify the signatures of primordial gravitational waves and cosmic birefringence within the CMB polarization. We introduce the COSMOCal project, designed to deploy a polarized source in space for calibrating microwave frequency observations. The project aims to integrate microwave polarization observations from small and large telescopes, ground-based and in space, into a unified scale, enhancing the effectiveness of each observatory and allowing robust combination of data. To demonstrate the feasibility and confirm the observational approach of our project, we developed a prototype instrument that operates in the atmospheric window centered at 260 GHz, specifically tailored for use with the NIKA2 camera at the IRAM 30 m telescope. We present the instrument components and their laboratory characterization. The results of tests performed with the fully assembled prototype using a KIDs-based instrument, similar concept of NIKA2, are also reported. This study paves the way for an observing campaign using the IRAM 30m telescope and contributes to the development of a space-based instrument.

astro-ph.CO↗

arXiv2023

LiteBIRD Science Goals and Forecasts: A full-sky measurement of gravitational lensing of the CMB

We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,\mu$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere.

astro-ph.CO↗

arXiv2023

LiteBIRD Science Goals and Forecasts: Improving Sensitivity to Inflationary Gravitational Waves with Multitracer Delensing

We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method.

astro-ph.CO↗

arXiv2023

Polarization angle accuracy for future CMB experiments. The COSMOCal project and its prototype in the 1mm band

The Cosmic Microwave Background (CMB) radiation offers a unique window into the early Universe, facilitating precise examinations of fundamental cosmological theories. However, the quest for detecting B-modes in the CMB, predicted by theoretical models of inflation, faces substantial challenges in terms of calibration and foreground modeling. The COSMOCal (COsmic Survey of Millimeter wavelengths Objects for CMB experiments Calibration) project aims at enhancing the accuracy of the absolute calibration of the polarization angle $\psi$ of current and future CMB experiments. The concept includes the build of a very well known artificial source emitting in the frequency range [20-350] GHz that would act as an absolute calibrator for several polarization facilities on Earth. A feasibility study to place the artificial source in geostationary orbit, in the far field for all the telescopes on Earth, is ongoing. In the meanwhile ongoing hardware work is dedicated to build a prototype to test the technology, the precision and the stability of the polarization recovering in the 1 mm band (220-300 GHz). High-resolution experiments as the NIKA2 camera at the IRAM 30m telescope will be deployed for such use. Once carefully calibrated ($\Delta\psi$ < 0.1 degrees) it will be used to observe astrophysical sources such as the Crab nebula, which is the best candidate in the sky for the absolute calibration of CMB experiments.

astro-ph.IM↗

arXiv2023

Measuring the CMB primordial B-modes with Bolometric Interferometry

The Q&U Bolometric Interferometer for Cosmology (QUBIC) is the first bolometric interferometer designed to measure the primordial B-mode polarization of the Cosmic Microwave Background (CMB). Bolometric interferometry is a novel technique that combines the sensitivity of bolometric detectors with the control of systematic effects that is typical of interferometry, both key features in the quest for the faint signal of the primordial B-modes. A unique feature is the so-called "spectral imaging", i.e., the ability to recover the sky signal in several sub-bands within the physical band during data analysis. This feature provides an in-band spectral resolution of \Delta{\nu}/{\nu} \sim 0.04 that is unattainable by a traditional imager. This is a key tool for controlling the Galactic foregrounds contamination. In this paper, we describe the principles of bolometric interferometry, the current status of the QUBIC experiment and future prospects.

astro-ph.CO↗

arXiv2023

Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations

LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $\delta r$, down to $\delta r<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $\chi^2$ sensitivity. (abridged)

astro-ph.CO↗

arXiv2022

Performance of the polarization leakage correction in the PILOT data

The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment that aims to measure the polarized emission of thermal dust at a wavelength of 240 um (1.2 THz). The PILOT experiment flew from Timmins, Ontario, Canada in 2015 and 2019 and from Alice Springs, Australia in April 2017. The in-flight performance of the instrument during the second flight was described in Mangilli et al. 2019. In this paper, we present data processing steps that were not presented in Mangilli et al. 2019 and that we have recently implemented to correct for several remaining instrumental effects. The additional data processing concerns corrections related to detector cross-talk and readout circuit memory effects, and leakage from total intensity to polarization. We illustrate the above effects and the performance of our corrections using data obtained during the third flight of PILOT, but the methods used to assess the impact of these effects on the final science-ready data, and our strategies for correcting them will be applied to all PILOT data. We show that the above corrections, and in particular that for the intensity to polarization leakage, which is most critical for accurate polarization measurements with PILOT, are accurate to better than 0.4 % as measured on Jupiter during flight#3.

astro-ph.IM↗