SearcharxivSearch

arXiv subjects

B. Martinez

Publications and source records attributed to B. Martinez.

16 recordsLinked to original sources

A hole spin resilient to dipole-induced thermal effects

Recent advances in scaling up spin-based quantum processors have revealed unanticipated issues related to thermal effects. Microwave pulses required to manipulate and read the qubits are found to overheat the spins environment, which unexpectedly induces Larmor frequency shifts, reducing thereby gate fidelities. In this study, we shine light on these elusive thermal effects, by experimentally characterizing the temperature dependence of the Larmor frequency for a single hole spin in silicon. Our results unambiguously reveal an electrical origin underlying the thermal susceptibility, stemming from the spin-orbit-induced electric susceptibility. We perform an accurate modeling of the spin electrostatic environment and gyromagnetic properties, allowing us to pinpoint electric dipoles which unfreeze as the temperature increases, as responsible for these frequency shifts. Surprisingly, we find that the thermal susceptibility can be tuned with the magnetic field angle and can even cancel out, unveiling a sweet spot where the hole spin is rendered immune to thermal effects. These findings reveal the microscopic origin of longitudinal thermal susceptibility, providing key insight for the design of thermally robust semiconductor qubits.

cond-mat.mes-hall

Direct laser acceleration: A model for the electron injection from the walls of a cylindrical guiding structure

We use analytical methods and particle-in-cell simulation to investigate the origin of electrons accelerated by the process of direct laser acceleration driven by high-power laser pulses in preformed narrow cylindrical plasma channels. The simulation shows that the majority of accelerated electrons are originally located along the interface between the channel wall and the channel interior. The analytical model based on the electron hydrodynamics illustrates the underlying physical mechanism of the release of electrons from the channel wall when irradiated by an intense laser, the subsequent electron dynamics, and the corresponding evolution of the channel density profile. The quantitative predictions of the total charge of released electrons and the average electron density inside the channel are validated by comparison with the simulation results.

physics.plasm-ph

Creation and direct laser acceleration of positrons in a single stage

Relativistic positron beams are required for fundamental research in nonlinear strong field QED, plasma physics, and laboratory astrophysics. Positrons are difficult to create and manipulate due to their short lifetime, and their energy gain is limited by the accelerator size in conventional facilities. Alternative compact accelerator concepts in plasmas are becoming more and more mature for electrons, but positron generation and acceleration remain an outstanding challenge. Here we propose a new setup where we can generate, inject and accelerate them in a single stage during the propagation of an intense laser in a plasma channel. The positrons are created from a laser-electron collision at 90 degrees, where the injection and guiding are made possible by an 800 nC electron beam loading which reverses the sign of the background electrostatic field. We obtain a 20 fC positron beam, with GeV-level central energy within 0.5 mm of plasma.

physics.plasm-ph

Numerical investigation of spallation neutrons generated from petawatt-scale laser-driven proton beams

Due to their high cost of acquisition and operation, there are still a limited number of high-yield, high-flux neutron source facilities worldwide. In this context, laser-driven neutron sources offer a promising, cheaper alternative to those based on large-scale accelerators, with, in addition, the potential of generating compact neutron beams of high brightness and ultra-short duration. In particular, the predicted capability of next-generation petawatt (PW)-class lasers to accelerate protons beyond the 100 MeV range should unlock efficient neutron generation through spallation reactions. In this paper, this scenario is investigated numerically through particle-in-cell and Monte Carlo simulations, modeling, respectively, the laser acceleration of protons from thin-foil targets and their subsequent conversion into neutrons in secondary heavy-ion targets. Laser parameters relevant to the 1 PW LMJ-PETAL and 1-10 PW Apollon systems are considered. Under such conditions, neutron fluxes exceeding $10^{23}\,\rm n\,cm^{-2}\,s^{-1}$ are predicted, opening up attractive fundamental and applicative prospects.

physics.acc-ph

Self-assembled line network in BiFeO3 thin films

In this work we report on the controlled fabrication of a self-assembled line network in highly epitaxial BiFeO3 thin films on top of LaAlO3 in the kinetically limited grown region by RF sputtering. As previously shown in the case of manganite thin films, the remarkable degree of ordering is achieved using vicinal substrates with well-defined step-terrace morphology. Nanostructured BiFeO3 thin films show mixed-phase morphology. Besides typical formation following (100) and (010) axes, some mixed phase nanodomains are detected also in-between the regular line network. These particular microstructures open a playground for future applications in multiferroic nanomaterials.

cond-mat.mtrl-sci

High-Energy Radiation and Pair Production by Coulomb Processes in Particle-In-Cell Simulations

We present a Monte Carlo implementation of the Bremsstrahlung, Bethe-Heitler and Coulomb Trident processes into the particle-in-cell (PIC) simulation framework. In order to address photon and electron-positron pair production in a wide range of physical conditions, we derive Bremsstrahlung and Bethe-Heitler cross sections taking account of screening effects in arbitrarily ionized plasmas. Our calculations are based on a simple model for the atomic Coulomb potential that describes shielding due to both bound electrons, free electrons and ions. We then describe a pairwise particle interaction algorithm suited to weighted PIC plasma simulations, for which we perform several validation tests. Finally, we carry out a parametric study of photon and pair production during high-energy electron transport through micrometric solid foils. Compared to the zero-dimensional model of J. Myatt et al. [Phys. Rev. E 76, 066409 (2009)], our integrated one-dimensional simulations pinpoint the importance of the electron energy losses resulting from the plasma expansion.

physics.plasm-ph

Synchrotron emission from nanowire-array targets irradiated by ultraintense laser pulses

We present a numerical study, based on two-dimensional particle-in-cell simulations, of the synchrotron emission induced during the interaction of femtosecond laser pulses of intensities $I=10^{21}-10^{23}\,\mathrm{Wcm}^{-2}$ with nanowire arrays. Through an extensive parametric scan on the target parameters, we identify and characterize several dominant radiation mechanisms, mainly depending on the transparency or opacity of the plasma produced by the wire expansion. At $I=10^{22}\,\mathrm{Wcm}^{-2}$, the emission of high-energy ($>10\,\mathrm{keV}$) photons attains a maximum conversion efficiency of $\sim 10\%$ for $36-50\,\mathrm{nm}$ wire widths and $1\,μ\mathrm{m}$ interspacing. This maximum radiation yield is similar to that achieved in uniform plasma of same average (sub-solid) density, but nanowire arrays provide efficient radiation sources over a broader parameter range. We examine the variations of the photon spectra with the laser intensity and the wire material. Finally, we demonstrate that the radiation efficiency can be further enhanced by adding a plasma mirror at the backside of the nanowire array.

physics.plasm-ph

Baby MIND: A magnetized segmented neutrino detector for the WAGASCI experiment

T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280~m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295~km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper.

physics.ins-det

Baby MIND Experiment Construction Status

Baby MIND is a magnetized iron neutrino detector, with novel design features, and is planned to serve as a downstream magnetized muon spectrometer for the WAGASCI experiment on the T2K neutrino beam line in Japan. One of the main goals of this experiment is to reduce systematic uncertainties relevant to CP-violation searches, by measuring the neutrino contamination in the anti-neutrino beam mode of T2K. Baby MIND is currently being constructed at CERN, and is planned to be operational in Japan in October 2017.

physics.ins-det

Baby MIND: A magnetised spectrometer for the WAGASCI experiment

The WAGASCI experiment being built at the J-PARC neutrino beam line will measure the difference in cross sections from neutrinos interacting with a water and scintillator targets, in order to constrain neutrino cross sections, essential for the T2K neutrino oscillation measurements. A prototype Magnetised Iron Neutrino Detector (MIND), called Baby MIND, is being constructed at CERN to act as a magnetic spectrometer behind the main WAGASCI target to be able to measure the charge and momentum of the outgoing muon from neutrino charged current interactions.

physics.ins-det

Mn valence instability in La2/3Ca1/3MnO3 thin films

A Mn valence instability on La2/3Ca1/3MnO3 thin films, grown on LaAlO3 (001)substrates is observed by x-ray absorption spectroscopy at the Mn L-edge and O K-edge. As-grown samples, in situ annealed at 800 C in oxygen, exhibit a Curie temperature well below that of the bulk material. Upon air exposure a reduction of the saturation magnetization, MS, of the films is detected. Simultaneously a Mn2+ spectral signature develops, in addition to the expected Mn3+ and Mn4+ contributions, which increases with time. The similarity of the spectral results obtained by total electron yield and fluorescence yield spectroscopy indicates that the location of the Mn valence anomalies is not confined to a narrow surface region of the film, but can extend throughout the whole thickness of the sample. High temperature annealing at 1000 C in air, immediately after growth, improves the magnetic and transport properties of such films towards the bulk values and the Mn2+ signature in the spectra does not appear. The Mn valence is then stable even to prolonged air exposure. We propose a mechanism for the Mn2+ ions formation and discuss the importance of these observations with respect to previous findings and production of thin films devices.

cond-mat.mtrl-sci

Exchange bias in laterally oxidized Au/Co/Au nanopillars

Au/Co/Au nanopillars fabricated by colloidal lithography of continuous trilayers exhibit and enhanced coercive field and the appearance of an exchange bias field with respect to the continuous layers. This is attributed to the lateral oxidation of the Co interlayer that appears upon disc fabrication. The dependence of the exchange bias field on the Co nanodots size and on the oxidation degree is analyzed and its microscopic origin clarified by means of Monte Carlo simulations based on a model of a cylindrical dot with lateral core/shell structure.

cond-mat.mtrl-sci

Magnetic dead layers in La2/3Ca1/3MnO3 thin films probed by X-ray magnetic circular dichroism in reflection

Surface magnetic properties of perovskite manganites have been a recurrent topic during last years since they play a major role in the implementation of magnetoelectronic devices. Magneto-optical techniques, such as X-ray magnetic circular dichroism, turn out to be a very efficient tool to study surface magnetism due to their sensitivity to magnetic and chemical variations across the sample depth. Nevertheless, the application of the sum rules for the determination of the spin magnetic moment might lead to uncertainties as large as 40% in case of Mn ions. To overcome this problem we present an alternative approach consisting of using X-ray magnetic circular dichroism in reflection geometry. Fit of the data by using a computer code based in a 4X4 matrix formalism leads to realistic results. In particular, we show that surface and interface roughness are of major relevance for a proper description of the experimental data and a correct interpretation of the results. By using such an approach we demonstrate the presence of a narrow surface region with strongly depressed magnetic properties in La2/3Ca1/3MnO3 thin films.

cond-mat.mtrl-sci

Formation of Mn2+ in La2/3Ca1/3MnO3 Thin Films due to Air Exposure

We report on the chemical stability of La2/3Ca1/3MnO3 thin films. X-ray absorption spectroscopy at the Mn L-edge and O K-edge makes evident deviations from the nominally expected (2/3-1/3) Mn3+/Mn4+ ratio after the growth of thin films on LaAlO3 substrates. As-grown thin films, exhibiting Curie temperature, TC, well below that of the LCMO bulk material, develop an unexpected Mn2+ contribution after a few days of air exposure which increases with time. Moreover, a reduction of the saturation magnetization, MS, is also detected. The similarity of the results obtained by electron yield and fluorescence yield demonstrates that the location of the Mn valence anomalies are not confined to a narrow surface region of the film but can extend throughout the film thickness in case of granular films. High temperature annealing not only improves the magnetic and transport properties of such as-grown films but also recovers the expected 2/3-1/3 Mn3+/Mn4+ ratio, which thereafter is stable to air exposure. Similar results on La2/3Ca1/3MnO3 films grown on SrTiO3 and NdGaO3 substrates demonstrate that there is no direct relation between the observed Mn valence instability and the strain state of the films due to their lattice mismatch with the substrate. A mechanism for the formation of Mn2+ ions formation is discussed.

cond-mat.mtrl-sci

Evidence of strong antiferromagnetic coupling between localized and itinerant electrons in ferromagnetic Sr2FeMoO6

Magnetic dc susceptibility ($χ$) and electron spin resonance (ESR) measurements in the paramagnetic regime, are presented. We found a Curie-Weiss (CW) behavior for $χ$(T) with a ferromagnetic $Θ= 446(5)$ K and $μ_{eff} = 4.72(9) μ_{B}/f.u.$, this being lower than that expected for either $Fe^{3+}(5.9μ_{B})$ or $Fe^{2+}(4.9μ_{B})$ ions. The ESR g-factor $g = 2.01(2)$, is associated with $Fe^{3+}$. We obtained an excellent description of the experiments in terms of two interacting sublattices: the localized $Fe^{3+}$ ($3d^{5}$) cores and the delocalized electrons. The coupled equations were solved in a mean-field approximation, assuming for the itinerant electrons a bare susceptibility independent on $T$. We obtained $χ_{e}^{0} = 3.7$ $10^{-4}$ emu/mol. We show that the reduction of $μ_{eff}$ for $Fe^{3+}$ arises from the strong antiferromagnetic (AFM) interaction between the two sublattices. At variance with classical ferrimagnets, we found that $Θ$ is ferromagnetic. Within the same model, we show that the ESR spectrum can be described by Bloch-Hasegawa type equations. Bottleneck is evidenced by the absence of a $g$-shift. Surprisingly, as observed in CMR manganites, no narrowing effects of the ESR linewidth is detected in spite of the presence of the strong magnetic coupling. These results provide evidence that the magnetic order in $Sr_{2}FeMoO_{6}$ does not originates in superexchange interactions, but from a novel mechanism recently proposed for double perovskites.

cond-mat.mtrl-sci

Cationic ordering control of magnetization in Sr2FeMoO6 double perovskite

The role of the synthesis conditions on the cationic Fe/Mo ordering in Sr2FeMoO6 double perovskite is addressed. It is shown that this ordering can be controlled and varied systematically. The Fe/Mo ordering has a profound impact on the saturation magnetization of the material. Using the appropriate synthesis protocol a record value of 3.7muB/f.u. has been obtained. Mossbauer analysis reveals the existence of two distinguishable Fe sites in agreement with the P4/mmm symmetry and a charge density at the Fe(m+) ions significantly larger than (+3) suggesting a Fe contribution to the spin-down conduction band. The implications of these findings for the synthesis of Sr2FeMoO6 having optimal magnetoresistance response are discussed.

cond-mat