arXiv subjects

B. Mosser

Publications and source records attributed to B. Mosser.

At least 145 records · Page 8Linked to original sources

arXiv2010

Asteroseismology of red giants from the first four months of Kepler data: Global oscillation parameters for 800 stars

We have studied solar-like oscillations in ~800 red-giant stars using Kepler long-cadence photometry. The sample includes stars ranging in evolution from the lower part of the red-giant branch to the Helium main sequence. We investigate the relation between the large frequency separation (Delta nu) and the frequency of maximum power (nu_max) and show that it is different for red giants than for main-sequence stars, which is consistent with evolutionary models and scaling relations. The distributions of nu_max and Delta nu are in qualitative agreement with a simple stellar population model of the Kepler field, including the first evidence for a secondary clump population characterized by M ~> 2 M_sun and nu_max ~ 40-110 muHz. We measured the small frequency separations delta nu_02 and delta nu_01 in over 400 stars and delta nu_03 in over 40. We present C-D diagrams for l=1, 2 and 3 and show that the frequency separation ratios delta nu_02/Delta nu and delta nu_01/Delta nu have opposite trends as a function of Delta nu. The data show a narrowing of the l=1 ridge towards lower nu_max, in agreement with models predicting more efficient mode trapping in stars with higher luminosity. We investigate the offset epsilon in the asymptotic relation and find a clear correlation with Delta nu, demonstrating that it is related to fundamental stellar parameters. Finally, we present the first amplitude-nu_max relation for Kepler red giants. We observe a lack of low-amplitude stars for nu_max ~> 110 muHz and find that, for a given nu_max between 40-110 muHz, stars with lower Delta nu (and consequently higher mass) tend to show lower amplitudes than stars with higher Delta nu.

astro-ph.SR↗

arXiv2010

Evidence for a sharp structure variation inside a red-giant star

The availability of precisely determined frequencies of radial and non-radial oscillation modes in red giants is finally paving the way for detailed studies of the internal structure of these stars. We look for the seismic signature of regions of sharp structure variation in the internal structure of the CoRoT target HR7349. We analyse the frequency dependence of the large frequency separation and second frequency differences, as well as the behaviour of the large frequency separation obtained with the envelope auto-correlation function. We find evidence for a periodic component in the oscillation frequencies, i.e. the seismic signature of a sharp structure variation in HR7349. In a comparison with stellar models we interpret this feature as caused by a local depression of the sound speed that occurs in the helium second-ionization region. Using solely seismic constraints this allows us to estimate the mass (M=1.2^{+0.6}_{-0.4} Msun) and radius (R=12.2^{+2.1}_{-1.8} Rsun) of HR7349, which agrees with the location of the star in an HR diagram.

astro-ph.SR↗

arXiv2010

Solar-like oscillations in red giants observed with Kepler: comparison of global oscillation parameters from different methods

The large number of stars for which uninterrupted high-precision photometric timeseries data are being collected with \textit{Kepler} and CoRoT initiated the development of automated methods to analyse the stochastically excited oscillations in main-sequence, subgiant and red-giant stars. Aims: We investigate the differences in results for global oscillation parameters of G and K red-giant stars due to different methods and definitions. We also investigate uncertainties originating from the stochastic nature of the oscillations. Methods: For this investigation we use Kepler data obtained during the first four months of operation. These data have been analysed by different groups using already published methods and the results are compared. We also performed simulations to investigate the uncertainty on the resulting parameters due to different realizations of the stochastic signal. Results: We obtain results for the frequency of maximum oscillation power (nu_max) and the mean large separation ( ) from different methods for over one thousand red-giant stars. The results for these parameters agree within a few percent and seem therefore robust to the different analysis methods and definitions used here. The uncertainties for nu_max and due to differences in realization noise are not negligible and should be taken into account when using these results for stellar modelling.

astro-ph.SR↗

arXiv2010

Asteroseismology of Solar-type Stars with Kepler I: Data Analysis

We report on the first asteroseismic analysis of solar-type stars observed by Kepler. Observations of three G-type stars, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation can clearly be distinguished in each star. We discuss the appearance of the oscillation spectra, including the presence of a possible signature of faculae, and the presence of mixed modes in one of the three stars.

astro-ph.SR↗

arXiv2010

Inpainting: A powerful interpolation technique for helio- and asteroseismic data

In Helio- and asteroseismology, it is important to have continuous, uninterrupted, data sets. However, seismic observations usually contain gaps and we need to take them into account. In particular, if the gaps are not randomly distributed, they will produce a peak and a series of harmonics in the periodogram that will destroy the stellar information. An interpolation of the data can be good solution for this problem. In this paper we have studied an interpolation method based on the so-called 'inpainting' algorithms. To check the algorithm, we used both VIRGO and CoRoT satellite data to which we applied a realistic artificial window of a real CoRoT observing run to introduce gaps. Next we compared the results with the original, non-windowed data. Therefore, we were able to optimize the algorithm by minimizing the difference between the power spectrum density of the data with gaps and the complete time series. In general, we find that the power spectrum of the inpainted time series is very similar to the original, unperturbed one. Seismic inferences obtained after interpolating the data are the same as in the original case.

astro-ph.SR↗

arXiv2010

The solar-like CoRoT target HD 170987: spectroscopic and seismic observations

The CoRoT mission is in its third year of observation and the data from the second long run in the galactic centre direction are being analysed. The solar-like oscillating stars that have been observed up to now have given some interesting results, specially concerning the amplitudes that are lower than predicted. We present here the results from the analysis of the star HD 170987.The goal of this research work is to characterise the global parameters of HD 170987. We look for global seismic parameters such as the mean large separation, maximum amplitude of the modes, and surface rotation because the signal-to-noise ratio in the observations do not allow us to measure individual modes. We also want to retrieve the stellar parameters of the star and its chemical composition.We have studied the chemical composition of the star using ground-based observations performed with the NARVAL spectrograph. We have used several methods to calculate the global parameters from the acoustic oscillations based on CoRoT data. The light curve of the star has been interpolated using inpainting algorithms to reduce the effect of data gaps. We find power excess related to p modes in the range [400 - 1200]muHz with a mean large separation of 55.2+-0.8muHz with a probability above 95% that increases to 55.9 +-0.2muHz in a higher frequency range [500 - 1250] muHz and a rejection level of 1%. A hint of the variation of this quantity with frequency is also found. The rotation period of the star is estimated to be around 4.3 days with an inclination axis of i=50 deg +20/-13. We measure a bolometric amplitude per radial mode in a range [2.4 - 2.9] ppm around 1000 muHz. Finally, using a grid of models, we estimate the stellar mass, M=1.43+-0.05 Msun, the radius, R=1.96+-0.046 Rsun, and the age ~2.4 Gyr.

astro-ph.SR↗

arXiv2010

Red-giant seismic properties analyzed with CoRoT

The CoRoT 5-month long observation runs give us the opportunity to analyze a large variety of red-giant stars and to derive fundamental stellar parameters from their asteroseismic properties. We perform an analysis of more than 4\,600 CoRoT light curves to extract as much information as possible. We take into account the characteristics of the star sample and of the method in order to provide asteroseismic results as unbiased as possible. We also study and compare the properties of red giants of two opposite regions of the Galaxy. We analyze the time series with the envelope autocorrelation function in order to extract precise asteroseismic parameters with reliable error bars. We examine first the mean large frequency separation of solar-like oscillations and the frequency of maximum seismic amplitude, then the parameters of the excess power envelope. With the additional information of the effective temperature, we derive the stellar mass and radius. We have identified more than 1\,800 red giants among the 4\,600 light curves and have obtained accurate distributions of the stellar parameters for about 930 targets. We were able to reliably measure the mass and radius of several hundred red giants. We have derived precise information on the stellar population distribution and on the red clump. Comparison between the stars observed in two different fields shows that the stellar asteroseismic properties are globally similar, but with different characteristics for red-clump stars. This study shows the efficiency of statistical asteroseismology: validating scaling relations allows us to infer fundamental stellar parameters, to derive precise information on the red-giant evolution and interior structure and to analyze and compare stellar populations from different fields.

astro-ph.SR↗

arXiv2010

Seismic and spectroscopic characterization of the solar-like pulsating CoRoT target HD 49385

The star HD 49385 is the first G-type solar-like pulsator observed in the seismology field of the space telescope CoRoT. The satellite collected 137 days of high-precision photometric data on this star, confirming that it presents solar-like oscillations. HD 49385 was also observed in spectroscopy with the NARVAL spectrograph in January 2009. Our goal is to characterize HD 49385 using both spectroscopic and seismic data. The fundamental stellar parameters of HD 49385 are derived with the semi-automatic software VWA, and the projected rotational velocity is estimated by fitting synthetic profiles to isolated lines in the observed spectrum. A maximum likelihood estimation is used to determine the parameters of the observed p modes. We perform a global fit, in which modes are fitted simultaneously over nine radial orders, with degrees ranging from l=0 to l=3 (36 individual modes). Precise estimates of the atmospheric parameters (Teff, [M/H], log g) and of the vsini of HD 49385 are obtained. The seismic analysis of the star leads to a clear identification of the modes for degrees l=0,1,2. Around the maximum of the signal (nu=1013 microHz), some peaks are found significant and compatible with the expected characteristics of l=3 modes. Our fit yields robust estimates of the frequencies, linewidths and amplitudes of the modes. We find amplitudes of about 5.6 +/- 0.8 ppm for radial modes at the maximum of the signal. The lifetimes of the modes range from one day (at high frequency) to a bit more than two days (at low frequency). Significant peaks are found outside the identified ridges and are fitted. They are attributed to mixed modes.

astro-ph.SR↗

arXiv2010

A multi-site campaign to measure solar-like oscillations in Procyon. II. Mode frequencies

We have analyzed data from a multi-site campaign to observe oscillations in the F5 star Procyon. The data consist of high-precision velocities that we obtained over more than three weeks with eleven telescopes. A new method for adjusting the data weights allows us to suppress the sidelobes in the power spectrum. Stacking the power spectrum in a so-called echelle diagram reveals two clear ridges that we identify with even and odd values of the angular degree (l=0 and 2, and l=1 and 3, respectively). We interpret a strong, narrow peak at 446 muHz that lies close to the l=1 ridge as a mode with mixed character. We show that the frequencies of the ridge centroids and their separations are useful diagnostics for asteroseismology. In particular, variations in the large separation appear to indicate a glitch in the sound-speed profile at an acoustic depth of about 1000 s. We list frequencies for 55 modes extracted from the data spanning 20 radial orders, a range comparable to the best solar data, which will provide valuable constraints for theoretical models. A preliminary comparison with published models shows that the offset between observed and calculated frequencies for the radial modes is very different for Procyon than for the Sun and other cool stars. We find the mean lifetime of the modes in Procyon to be 1.29 +0.55/-0.49 days, which is significantly shorter than the 2-4 days seen in the Sun.

astro-ph.SR↗

arXiv2010

Survival of a convective core in low-mass solar-like pulsator HD 203608

A 5-night asteroseismic observation of the F8V star HD 203608 was conducted in August 2006 with HARPS, followed by an analysis of the data, and a preliminary modeling of the star (Mosser et al. 2008). The stellar parameters were significantly constrained, but the behavior of one of the seismic indexes (the small spacing d01) could not be fitted with the observed one, even with the best considered models. We study the possibility of improving the agreement between models and observations by changing the physical properties of the inner parts of the star (to which d01 is sensitive). We show that, in spite of its low mass, it is possible to produce models of HD 203608 with a convective core. No such model was considered in the preliminary modeling. In practice, we obtain these models here by assuming some extra mixing at the edge of the early convective core. We optimize the model parameters using the Levenberg-Marquardt algorithm. The agreement between the new best model with a convective core and the observations is much better than for the models without. All the observational parameters are fitted within 1-sigma observational error bars. This is the first observational evidence of a convective core in an old and low-mass star such as HD 203608. In standard models of low-mass stars, the core withdraws shortly after the ZAMS. The survival of the core until the present age of HD 203608 provides very strong constraints on the size of the mixed zone associated to the convective core. Using overshooting as a proxy to model the processes of transport at the edge of the core, we find that to reproduce both global and seismic observations, we must have alpha_ov = 0.17 +/- 0.03 Hp for HD 203608. We revisit the process of the extension of the core lifetime due to overshooting in the particular case of HD 203608.

astro-ph.SR↗

arXiv2010

Solar-like oscillations in low-luminosity red giants: first results from Kepler

We have measured solar-like oscillations in red giants using time-series photometry from the first 34 days of science operations of the Kepler Mission. The light curves, obtained with 30-minute sampling, reveal clear oscillations in a large sample of G and K giants, extending in luminosity from the red clump down to the bottom of the giant branch. We confirm a strong correlation between the large separation of the oscillations (Delta nu) and the frequency of maximum power (nu_max). We focus on a sample of 50 low-luminosity stars (nu_max > 100 muHz, L <~ 30 L_sun) having high signal-to-noise ratios and showing the unambiguous signature of solar-like oscillations. These are H-shell-burning stars, whose oscillations should be valuable for testing models of stellar evolution and for constraining the star-formation rate in the local disk. We use a new technique to compare stars on a single echelle diagram by scaling their frequencies and find well-defined ridges corresponding to radial and non-radial oscillations, including clear evidence for modes with angular degree l=3. Measuring the small separation between l=0 and l=2 allows us to plot the so-called C-D diagram of delta nu_02 versus Delta nu. The small separation delta nu_01 of l=1 from the midpoint of adjacent l=0 modes is negative, contrary to the Sun and solar-type stars. The ridge for l=1 is notably broadened, which we attribute to mixed modes, confirming theoretical predictions for low-luminosity giants. Overall, the results demonstrate the tremendous potential of Kepler data for asteroseismology of red giants.

astro-ph.SR↗

arXiv2010

The asteroseismic potential of Kepler: first results for solar-type stars

We present preliminary asteroseismic results from Kepler on three G-type stars. The observations, made at one-minute cadence during the first 33.5d of science operations, reveal high signal-to-noise solar-like oscillation spectra in all three stars: About 20 modes of oscillation may be clearly distinguished in each star. We discuss the appearance of the oscillation spectra, use the frequencies and frequency separations to provide first results on the radii, masses and ages of the stars, and comment in the light of these results on prospects for inference on other solar-type stars that Kepler will observe.

astro-ph.SR↗

arXiv2009

The CoRoT target HD 49933: 2- Comparison of theoretical mode amplitudes with observations

From the seismic data obtained by CoRoT for the star HD 49933 it is possible, as for the Sun, to constrain models of the excitation of acoustic modes by turbulent convection. We compare a stochastic excitation model described in Paper I (arXiv:0910.4027) with the asteroseismology data for HD 49933, a star that is rather metal poor and significantly hotter than the Sun. Using the mode linewidths measured by CoRoT for HD 49933 and the theoretical mode excitation rates computed in Paper I, we derive the expected surface velocity amplitudes of the acoustic modes detected in HD 49933. Using a calibrated quasi-adiabatic approximation relating the mode amplitudes in intensity to those in velocity, we derive the expected values of the mode amplitude in intensity. Our amplitude calculations are within 1-sigma error bars of the mode surface velocity spectrum derived with the HARPS spectrograph. The same is found with the mode amplitudes in intensity derived for HD 49933 from the CoRoT data. On the other hand, at high frequency, our calculations significantly depart from the CoRoT and HARPS measurements. We show that assuming a solar metal abundance rather than the actual metal abundance of the star would result in a larger discrepancy with the seismic data. Furthermore, calculations that assume the ``new'' solar chemical mixture are in better agreement with the seismic data than those that assume the ``old'' solar chemical mixture. These results validate, in the case of a star significantly hotter than the Sun and Alpha Cen A, the main assumptions in the model of stochastic excitation. However, the discrepancies seen at high frequency highlight some deficiencies of the modelling, whose origin remains to be understood.

astro-ph.SR↗

arXiv2009

On detecting the large separation in the autocorrelation of stellar oscillation times series

The observations carried out by the space missions CoRoT and Kepler provide a large set of asteroseismic data. Their analysis requires an efficient procedure first to determine if the star is reliably showing solar-like oscillations, second to measure the so-called large separation, third to estimate the asteroseismic information that can be retrieved from the Fourier spectrum. We develop in this paper a procedure, based on the autocorrelation of the seismic Fourier spectrum. We have searched for criteria able to predict the output that one can expect from the analysis by autocorrelation of a seismic time series. First, the autocorrelation is properly scaled for taking into account the contribution of white noise. Then, we use the null hypothesis H0 test to assess the reliability of the autocorrelation analysis. Calculations based on solar and CoRoT times series are performed in order to quantify the performance as a function of the amplitude of the autocorrelation signal. We propose an automated determination of the large separation, whose reliability is quantified by the H0 test. We apply this method to analyze a large set of red giants observed by CoRoT. We estimate the expected performance for photometric time series of the Kepler mission. Finally, we demonstrate that the method makes it possible to distinguish l=0 from l=1 modes. The envelope autocorrelation function has proven to be very powerful for the determination of the large separation in noisy asteroseismic data, since it enables us to quantify the precision of the performance of different measurements: mean large separation, variation of the large separation with frequency, small separation and degree identification.

astro-ph.SR↗

arXiv2009

A fresh look at the seismic spectrum of HD49933: analysis of 180 days of CoRoT photometry

Solar-like oscillations have now been observed in several stars, thanks to ground-based spectroscopic observations and space-borne photometry. CoRoT, which has been in orbit since December 2006, has observed the star HD49933 twice. The oscillation spectrum of this star has proven difficult to interpret. Thanks to a new timeseries provided by CoRoT, we aim to provide a robust description of the oscillations in HD49933, i.e., to identify the degrees of the observed modes, and to measure mode frequencies, widths, amplitudes and the average rotational splitting. Several methods were used to model the Fourier spectrum: Maximum Likelihood Estimators and Bayesian analysis using Markov Chain Monte-Carlo techniques. The different methods yield consistent result, and allow us to make a robust identification of the modes and to extract precise mode parameters. Only the rotational splitting remains difficult to estimate precisely, but is clearly relatively large (several microHz in size).

astro-ph.SR↗

arXiv2009

The CoRoT target HD175726: an active star with weak solar-like oscillations

Context. The CoRoT short runs give us the opportunity to observe a large variety of late-type stars through their solar-like oscillations. We report observations of the star HD175726 that lasted for 27 days during the first short run of the mission. The time series reveals a high-activity signal and the power spectrum presents an excess due to solar-like oscillations with a low signal-to-noise ratio. Aims. Our aim is to identify the most efficient tools to extract as much information as possible from the power density spectrum. Methods. The most productive method appears to be the autocorrelation of the time series, calculated as the spectrum of the filtered spectrum. This method is efficient, very rapid computationally, and will be useful for the analysis of other targets, observed with CoRoT or with forthcoming missions such as Kepler and Plato. Results. The mean large separation has been measured to be 97.2+-0.5 microHz, slightly below the expected value determined from solar scaling laws.We also show strong evidence for variation of the large separation with frequency. The bolometric mode amplitude is only 1.7+-0.25 ppm for radial modes, which is 1.7 times less than expected. Due to the low signal-to-noise ratio, mode identification is not possible for the available data set of HD175726. Conclusions. This study shows the possibility of extracting a seismic signal despite a signal-to-noise ratio of only 0.37. The observation of such a target shows the efficiency of the CoRoT data, and the potential benefit of longer observing runs.

astro-ph.SR↗

arXiv2009

Short-lived spots in solar-like stars as observed by CoRoT

Context. CoRoT light curves have an unprecedented photometric quality, having simultaneously a high signal-to-noise ratio, a long time span and a nearly continuous duty-cycle. Aims. We analyse the light-curves of four bright targets observed in the seismology field and study short-lived small spots in solar-like stars. Methods. We present a simple spot modeling by iterative analysis. Its ability to extract relevant parameters is ensured by implementing relaxation steps to avoid convergence to local minima of the sum of the residuals between observations and modeling. The use of Monte-Carlo simulations allows us to estimate the performance of the fits. Results. Our starspot modeling gives a representation of the spots on these stars in agreement with other well tested methods. Within this framework, parameters such as rigid-body rotation and spot lifetimes seem to be precisely determined. Then, the lifetime/rotation period ratios are in the range 0.5 - 2, and there is clear evidence for differential rotation.

astro-ph.SR↗

arXiv2009

Solar-like oscillations with low amplitude in the CoRoT target HD 181906

Context: The F8 star HD 181906 (effective temperature ~6300K) was observed for 156 days by the CoRoT satellite during the first long run in the centre direction. Analysis of the data reveals a spectrum of solar-like acoustic oscillations. However, the faintness of the target (m_v=7.65) means the signal-to-noise (S/N) in the acoustic modes is quite low, and this low S/N leads to complications in the analysis. Aims: To extract global variables of the star as well as key parameters of the p modes observed in the power spectrum of the lightcurve. Methods: The power spectrum of the lightcurve, a wavelet transform and spot fitting have been used to obtain the average rotation rate of the star and its inclination angle. Then, the autocorrelation of the power spectrum and the power spectrum of the power spectrum were used to properly determine the large separation. Finally, estimations of the mode parameters have been done by maximizing the likelihood of a global fit, where several modes were fit simultaneously. Results: We have been able to infer the mean surface rotation rate of the star (~4 microHz) with indications of the presence of surface differential rotation, the large separation of the p modes (~87 microHz), and therefore also the ridges corresponding to overtones of the acoustic modes.

astro-ph.SR↗