Searcharxiv⌕ Search

arXiv subjects

B. N. J. Persson

Publications and source records attributed to B. N. J. Persson.

At least 73 records · Page 4Linked to original sources
arXiv2014

Comment on "Fully covariant radiation force on a polarizable particle"

Recently Pieplow and Henkel (PH) (NJP \textbf{15} (2013) 023027) presented a new fully covariant theory of the Casimir friction force acting on small neutral particle moving parallel to flat surface. We compare results of this theory with results which follow from a fully relativistic theory of friction in plate-plate configurations in the limit when one plate is considered as sufficiently rarefied. We show that there is the agreement between these theories.

cond-mat.other↗
arXiv2013

Atomistic modelling of friction of Cu and Au nanoparticles adsorbed on graphene

We present classical molecular dynamics calculations of the behavior of copper and gold nanoparticles on a graphene sheet, sheared with a constant applied force $F_{\rm a}$. The force $F_{\rm s}$ acting on the particle from the substrate depends on the material of the nanoparticles (Au or Cu), and exhibits a sawtooth dependency on time, which we attribute to local commensurability between the metal nanoparticle surface atomic positions with the graphene lattice. The time-averaged value of $F_{\rm s}$ (the friction force) acting on Au nanoparticles increases linearly with the contact area, having slopes close to the experimentally observable ones. A qualitative model is proposed to explain the observed results.

cond-mat.mes-hall↗
arXiv2013

Contact electrification and the work of adhesion

We present a general theory for the contribution from contact electrification to the work necessary to separate two solid bodies. The theory depends on the surface charge density correlation function, which we deduce from Kelvin Force Microscopy (KFM) maps of the surface electrostatic potential. For silicon rubber (polydimethylsiloxane, PDMS) we discuss in detail the relative importance of the different contributions to the observed work of adhesion.

cond-mat.soft↗
arXiv2012

Effective Viscosity of Confined Hydrocarbons

We present molecular dynamics friction calculations for confined hydrocarbon films with molecular lengths from 20 to 1400 carbon atoms. We find that the logarithm of the effective viscosity μeff for nanometer-thin films depends linearly on the logarithm of the shear rate: log(effective viscosity) = C - n log (shear rate), where n varies from 1 (solidlike friction) at very low temperatures to 0 (Newtonian liquid) at very high temperatures, following an inverse sigmoidal curve. Only the shortest chain molecules melt, whereas the longer ones only show a softening in the studied temperature interval 0 < T < 900 K. The results are important for the frictional properties of very thin (nanometer) films and to estimate their thermal durability.

cond-mat.mtrl-sci↗
arXiv2011

Adhesion between elastic solids with randomly rough surfaces: comparison of analytical theory with molecular dynamics simulations

The adhesive contact between elastic solids with randomly rough, self affine fractal surfaces is studied by molecular dynamics (MD) simulations. The interfacial binding energy obtained from the simulations of nominally flat and curved surfaces is compared with the predictions of the contact mechanics theory by Persson. Theoretical and simulation results agree rather well, and most of the differences observed can be attributed to finite size effects and to the long-range nature of the interaction between the atoms in the block and the substrate in the MD model, as compared to the analytical theory which is for an infinite system with interfacial contact interaction. For curved surfaces (JKR-type of problem) the effective interfacial energy exhibit a weak hysteresis which may be due to the influence of local irreversible detachment processes in the vicinity of the opening crack tip during pull-off.

cond-mat.soft↗
arXiv2011

Interfacial separation between elastic solids with randomly rough surfaces: comparison between theory and numerical techniques

We study the distribution of interfacial separations P(u) at the contact region between two elastic solids with randomly rough surfaces. An analytical expression is derived for P(u) using Persson's theory of contact mechanics, and is compared to numerical solutions obtained using (a) a half-space method based on the Boussinesq equation, (b) a Green's function molecular dynamics technique and (c) smart-block classical molecular dynamics. Overall, we find good agreement between all the different approaches.

cond-mat.soft↗
arXiv2011

Fluid squeeze-out between rough surfaces: comparison of theory with experiment

We study the time dependency of the (average) interfacial separation between an elastic solid with a flat surface and a rigid solid with a randomly rough surface, squeezed together in a fluid. We use an analytical theory describing the fluid flow factors, based on the Persson contact mechanics theory and the Bruggeman effective medium theory, to calculate the removal of the fluid from the contacting interface of the two solids. In order to test this approach, we have performed simple squeeze-out experiments. The experimental results are compared to the theory predictions.

cond-mat.soft↗
arXiv2011

Theory of Inelastic Tunneling Current-Driven Motions of Single Adsorbates (Review Article)

The theory of inelastic electron tunneling spectroscopy (IETS) and motions of single adsorbed atoms and molecules on metal surfaces induced by vibrational excitation with a scanning tunneling microscope (STM) is reviewed. The theory of STM-IETS is described using the adsorbate-induced resonance model. Elementary processes of how an adsorbate overcomes the potential barrier along the reaction coordinate (RC) by inelastic tunneling current are described with a focus on direct excitation of the RC mode by coherent and incoherent vibrational ladder climbing and an indirect one through anharmonic coupling to a mode excited by tunneling electrons. Action spectroscopy of single molecule motions is also discussed. The latter allows a direct access to the vibrational density of states, which can not be otherwise observed in the STM-IETS because of a competition between the elastic and inelastic tunneling currents.

cond-mat.mes-hall↗
arXiv2010

Near-field radiative heat transfer and van der Waals friction between closely spaced graphene and amorphous SiO$_2$

We study the radiative heat transfer and the van der Waals friction between graphene and an amorphous SiO$_2$ substrate. We study the surface phonon-polaritons contribution to the low-field mobility as a function of temperature and of carrier density. We find that the electric current saturate at a high electric field, in agreement with experiment. The saturation current depends weakly on the temperature, which we attribute to the "quantum" friction between the graphene carriers and the substrate optical phonons. We calculate the frictional drag between two graphene sheets caused by van der Waals friction, and find that this drag can induce a high enough voltage which can be easily measured experimentally. We find that for nonsuspended graphene the near-field radiative heat transfer, and the heat transfer due to direct phononic coupling, are of the same order of magnitude at low electric field. The phononic contribution to the heat transfer dominates at high field. For large separation between graphene and the substrate the heat transfer is dominated by the near-field radiative heat transfer.

cond-mat.mes-hall↗
arXiv2010

Heat Transfer between Weakly Coupled Systems

We study the heat transfer between weakly coupled systems with flat interface. We present simple analytical results which can be used to estimate the heat transfer coefficient. As applications we consider the heat transfer across solid-solid contacts, and between a membrane (graphene) and a solid substrate (amorphous SiO2). For the latter system the calculated value of the heat transfer coefficient is in good agreement with the value deduced from experimental data.

cond-mat.mtrl-sci↗
arXiv2010

Rolling friction for hard cylinder and sphere on viscoelastic solid

We calculate the friction force acting on a hard cylinder or spherical ball rolling on a flat surface of a viscoelastic solid. The rolling friction coefficient depends non-linearly on the normal load and the rolling velocity. For a cylinder rolling on a viscoelastic solid characterized by a single relaxation time Hunter has obtained an exact result for the rolling friction, and our result is in very good agreement with his result for this limiting case. The theoretical results are also in good agreement with experiments of Greenwood and Tabor. We suggest that measurements of rolling friction over a wide range of rolling velocities and temperatures may constitute an useful way to determine the viscoelastic modulus of rubber-like materials.

cond-mat.soft↗
arXiv2010

Heat Transfer between Graphene and Amorphous SiO2

We study the heat transfer between graphene and amorphous SiO2. We include both the heat transfer from the area of real contact, and between the surfaces in the non-contact region. We consider the radiative heat transfer associated with the evanescent electromagnetic waves which exist outside of all bodies, and the heat transfer by the gas in the non-contact region. We find that the dominant contribution to the heat transfer result from the area of real contact, and the calculated value of the heat transfer coefficient is in good agreement with the value deduced from experimental data.

cond-mat.soft↗
arXiv2010

Heat transfer between weakly coupled systems: Graphene on a-SiO2

We study the heat transfer between weakly coupled systems with flat interface. We present a simple analytical result which can be used to estimate the heat transfer coefficient. As an application we consider the heat transfer between graphene and amorphous SiO2. The calculated value of the heat transfer coefficient is in good agreement with the value deduced from experimental data.

cond-mat.mtrl-sci↗
arXiv2010

Rubber friction and tire dynamics

We propose a simple rubber friction law, which can be used, e.g., in models of tire (and vehicle) dynamics. The friction law is tested by comparing numerical results to the full rubber friction theory (B.N.J. Persson, J. Phys.: Condensed Matter 18, 7789 (2006)). Good agreement is found between the two theories. We describe a two-dimensional (2D) tire model which combines the rubber friction model with a simple mass-spring description of the tire body. The tire model is very flexible and can be used to calculate accurate mu-slip (and the self-aligning torque) curves for braking and cornering or combined motion (e.g., braking during cornering). We present numerical results which illustrate the theory. Simulations of Anti-Blocking System (ABS) braking are performed using two simple control algorithms.

cond-mat.soft↗
arXiv2010

Surface roughness induced electric field enhancement and triboluminescence

The separation of solids in adhesive contact, or the fracture of solid bodies, often results in the emission of high energy photons, e.g., visible light and X-rays. This is believed to be related to charge separation. We propose that the emission of high energy photons involves surface roughness and surface diffusion of ions or electrons, resulting in the concentration of charge at the tips of high asperities, and to electric field enhancement, which facilitate the discharging process which result in the high energy photons. If the surface diffusion is too fast, or the separation of the solid surfaces too slow, discharging start at small interfacial separation resulting in low energy photons.

cond-mat.soft↗
arXiv2010

Theory of the interaction forces and the heat transfer between moving bodies mediated by the fluctuating electromagnetic field

Within the framework of unified approach we study the Casimir-Lifshitz interaction, the van der Waals friction force and the radiative heat transfer at nonequilibrium conditions, when the interacting bodies are at different temperatures, and they move relative to each other with the arbitrary velocity $V$. The analysis is focused on the surface-surface and surface-particle configuration. Our approach is based on the exact solution of electromagnetic problem about the determination of the fluctuating electromagnetic field in the vacuum gap between two flat parallel surfaces moving relative to each other with the arbitrary velocity $V$. The velocity dependence of the considered phenomena is determined by Doppler shift and can be strong for resonant photon tunneling between surface modes. We show that relativistic effects give rise to a mixing of the contributions from the electromagnetic waves with different polarization to the heat transfer and the interaction forces. We find that these effects are of the order $(V/c)^2$. The limiting case when one of the bodies is sufficiently rarefied gives the heat transfer and the interaction forces between a moving small particle and a surface. We also calculate the friction force acting on a particle moving with an arbitrary velocity relative to the black body radiation.

cond-mat.other↗
arXiv2010

Fluid squeeze-out between solids with rough surfaces

We study the fluid squeeze-out from the interface between an elastic solid with a flat surface and a rigid solid with a randomly rough surface. As an application we discuss fluid squeeze-out between a tire tread block and a road surface. Some implications for the leakage of seals are discussed, and experimental data are presented to test the theory.

cond-mat.soft↗