arXiv subjects

B. Pégourié

Publications and source records attributed to B. Pégourié.

4 recordsLinked to original sources

arXiv2026

Integrated full pulse modeling for pellet injection in tokamaks: HPI2 model improvement and validation in WEST

Reliable modeling and control of core density is essential for reactor-relevant magnetic confinement fusion operation, motivating cryogenic pellet injection as a primary fueling actuator and the need for predictive pellet source models in integrated modeling. Here we present an upgrade of the physics-based pellet code HPI2 in which the plasmoid release spatial step is determined self-consistently from ablation physics, $dx_{var}=v_{\mathrm{pel}}\,t_{\mathrm{exit}}$ (optionally rescaled to trade accuracy for computational cost), removing an ad-hoc discretization parameter and improving numerical robustness across injection conditions. The upgraded model is first validated in stand-alone against a high-field-side pellet-fueled, ohmic, WEST discharge (#58656) by comparing synthetic and measured interferometry line-integrated density increments, obtaining a mean error of $\sim 10\%$. We then perform full-radius, time-dependent integrated modeling validation by coupling the new HPI2 within the High Fidelity Pulse Simulator (HFPS) workflow (JINTRAC/IMAS), combining JETTO with SANCO for the impurity/radiation evolution and TGLF-SAT2 for the turbulent transport. The coupled simulations reproduce the main density rise and relaxation after pellet injection and the associated electron-temperature transient, while taking into account the strong influence of tungsten radiation in WEST, supporting the consistency of HPI2 as a predictive pellet particle source in integrated modeling frameworks. Ultimately, this validation study supports the use of pellet modeling tools in integrated modeling studies for larger devices such as ITER.

physics.plasm-ph↗

arXiv2015

Thermal stability and long term hydrogen/deuterium release from soft to hard amorphous carbon layers analyzed using in-situ Raman spectroscopy. Comparison with Tore Supra deposits

The thermal stability of 200 nm thick plasma enhanced chemical vapor deposited a-C:H and a-C:D layers ranging from soft to hard layers has been studied and compared to that of deposits collected on the Tore Supra tokamak plasma facing components by means of in-situ Raman spectroscopy. Linear ramp heating and long term isotherms (from several minutes to 21 days) have been performed and correlations between spectrometric parameters have been found. The information obtained on the sp 2 clustering has been investigated by comparing the G band shift and the 514 nm photon absorption evolution due to the thermal treatment of the layer. The effects of isotopic substitution have also been investigated.

physics.chem-ph↗

arXiv2013

Long Term H-Release from Amorphous Carbon Evidenced by in Situ Raman Microscopy under Isothermal Heating

We study the kinetics of the H release from plasma-deposited hydrogenated amorphous carbon films under isothermal heating at 450, 500 and 600 {\degree}C for long times up to several days using in situ Raman microscopy. Four Raman parameters are analyzed. They allow the identification of different processes such as the carbon network reorganization and the H release from sp3 or sp2 carbon atoms and the corresponding timescales. Carbon reorganization with aromatization and loss of sp3 hybridization occurs first in 100 minutes at 500 {\degree}C. The final organization is similar at all investigated temperatures. Full H release from sp3 carbon occurs on a longer timescale of about 10 hours while H release from sp2 carbon atoms is only partial, even after several days. All these processes occur more rapidly with higher initial H content, in agreement with what is known about the stability of these types of films. A quantitative analysis of these kinetics studies gives valuable information about the microscopic processes at the origin of the H release through the determination of activation energies.

cond-mat.mtrl-sci↗

arXiv2013

Raman study of CFC tiles extracted from the toroidal pump limiter of Tore Supra

The structure of six tiles extracted from the erosion and deposition zones (thin and thick deposition) of the Tore Supra toroidal pump limiter (TPL) have been analysed in the framework of the DITS campaign using micro-Raman spectroscopy. This post-mortem analysis gives information on both carbon structure and D content. We have found that the carbon structure is most often similar to that of plasma-deposited hard amorphous carbon layers. The role of the surface temperature during the discharge in the D content is investigated: in all locations where the temperature does not reach more than 500{\degree}C the D content seems to be roughly uniform with D/D+C \approx 20%.

cond-mat.mtrl-sci↗