arXiv subjects

B. Steffen

Publications and source records attributed to B. Steffen.

8 recordsLinked to original sources

arXiv2019

Compact single-shot electro-optic detection system for THz pulses with femtosecond time resolution at MHz repetition rates

Electro-optical detection has proven to be a valuable technique to study temporal profiles of THz pulses with pulse durations down to femtoseconds. As the Coulomb field around a relativistic electron bunch resembles the current profile, electro-optical detection can be exploited for non-invasive bunch length measurements at accelerators. We have developed a very compact and robust electro-optical detection system based on spectral decoding for bunch length monitoring at the European XFEL with single-shot resolution better than 200~fs. Apart from the GaP crystal and the corresponding laser optics at the electron beamline, all components are housed in 19\" chassis for rack mount and remote operation inside the accelerator tunnel. An advanced laser synchronization scheme based on radio-frequency down-conversion has been developed for locking a custom-made Yb-fiber laser to the radio-frequency of the European XFEL accelerator. In order to cope with the high bunch repetition rate of the superconducting accelerator, a novel linear array detector (KALYPSO) has been employed for spectral measurements of the Yb-fiber laser pulses at frame rates of up to 2.26~MHz. In this paper, we describe all sub-systems of the electro-optical detection system as well as the measurement procedure in detail, and discuss first measurement results of longitudinal bunch profiles of around 400~fs (rms) with an arrival-time jitter of 35~fs (rms).

physics.ins-det↗

arXiv2016

Commissioning experience and beam physics measurements at the SwissFEL Injector Test Facility

The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and testbed for the development and realization of SwissFEL, the X-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including a transverse deflecting rf cavity. It delivered electron bunches of up to 200 pC charge and up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of an FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultra-low-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measurements performed during the operation of the test facility, including the results of the test of an in-vacuum undulator prototype generating radiation in the vacuum ultraviolet and optical range.

physics.acc-ph↗

arXiv2009

Modeling of pedestrian movement around 90 and 180 degree bends

For the planning of large pedestrian facilities, the movement of pedestrians in various situations has to be modelled. Many tools for pedestrian planning are based on cellular automata (CA), discrete in space and time, some use self driven pargticles (SDP), continuous in space and time. It is common experience that CA have problems with modelling sharp bends in wide corridors. They tend to move the pedestrians to the innermost lanes far too strongly, thereby reducing the capacity of the facility. With SDP, the problem seems to be less pronounced but still present. With CA, we compare the performance of two standard shortest distance based static floors on 90 and 180 degree bends with a newly defined one. For SDP, we demonstrate how variations in the modeling of the momentary destination of the agents influence trajectories and capacity.

physics.soc-ph↗

arXiv2009

A Modification of the Social Force Model by Foresight

The motion of pedestrian crowds (e.g. for simulation of an evacuation situation) can be modeled as a multi-body system of self driven particles with repulsive interaction. We use a few simple situations to determine the simplest allowed functional form of the force function. More complexity may be necessary to model more complex situations. There are many unknown parameters to such models, which have to be adjusted correctly. The parameters can be related to quantities that can be measured independently, like step length and frequency. The microscopic behavior is, however, only poorly reproduced in many situations, a person approaching a standing or slow obstacle will e.g. show oscillations in position, and the trajectories of two persons meeting in a corridor in opposite direction will be far from realistic and somewhat erratic. This is inpart due to the assumption of instantaneous reaction on the momentary situation. Obviously, persons react with a small time lag, while on the other hand they will anticipate changing situations for at least a short time. Thus basing the repulsive interaction on a (linear) extrapolation over a short time (e.g. 1 s) eliminates the oscillations at slowing down and smoothes the patterns of giving way to others to a more realistic behavior. A second problem is the additive combination of binary interactions. It is shown that combining only a few relevant interactions gives better model performance.

physics.soc-ph↗

arXiv2008

Enhanced empirical data for the fundamental diagram and the flow through bottlenecks

In recent years, several approaches for modelling pedestrian dynamics have been proposed and applied e.g. for design of egress routes. However, so far not much attention has been paid to their 'quantitative' validation. This unsatisfactory situation belongs amongst others on the uncertain and contradictory experimental data base. The fundamental diagram, i.e. the density-dependence of the flow or velocity, is probably the most important relation as it connects the basic parameter to describe the dynamic of crowds. But specifications in different handbooks as well as experimental measurements differ considerably. The same is true for the bottleneck flow. After a comprehensive review of the experimental data base we give an survey of a research project, including experiments with up to 250 persons performed under well controlled laboratory conditions. The trajectories of each person are measured in high precision to analyze the fundamental diagram and the flow through bottlenecks. The trajectories allow to study how the way of measurement influences the resulting relations. Surprisingly we found large deviation amongst the methods. These may be responsible for the deviation in the literature mentioned above. The results are of particular importance for the comparison of experimental data gained in different contexts and for the validation of models.

physics.soc-ph↗

arXiv2004

Surface Superconductivity in Niobium for Superconducting RF Cavities

A systematic study is presented on the superconductivity (sc) parameters of the ultrapure niobium used for the fabrication of the nine-cell 1.3 GHz cavities for the linear collider project TESLA. Cylindrical Nb samples have been subjected to the same surface treatments that are applied to the TESLA cavities: buffered chemical polishing (BCP), electrolytic polishing (EP), low-temperature bakeout (LTB). The magnetization curves and the complex magnetic susceptibility have been measured over a wide range of temperatures and dc magnetic fields, and also for di erent frequencies of the applied ac magnetic field. The bulk superconductivity parameters such as the critical temperature Tc = 9.26 K and the upper critical field Bc2(0) = 410 mT are found to be in good agreement with previous data. Evidence for surface superconductivity at fields above Bc2 is found in all samples. The critical surface field exceeds the Ginzburg-Landau field Bc3 = 1.695Bc2 by about 10% in BCP-treated samples and increases even further if EP or LTB are applied. From the field dependence of the susceptibility and a power-law analysis of the complex ac conductivity and resistivity the existence of two different phases of surface superconductivity can be established which resemble the Meissner and Abrikosov phases in the bulk: (1) coherent surface superconductivity, allowing sc shielding currents flowing around the entire cylindrical sample, for external fields B in the range between Bc2 and Bcohc3, and (2) incoherent surface superconductivity with disconnected sc domains between Bcohc3 and Bc3. The coherent critical surface field separating the two phases is found to be Bcoh c3 = 0.81Bc3 for all samples. The exponents in the power law analysis are different for BCP and EP samples, pointing to different surface topologies.

physics.acc-ph↗

arXiv2003

The Subgrid Problem of the Thermal Convection in the Earth's Liquid Core

The problem of the turbulent thermal convection in the Earth's liquid core is considered. Following assumptions on decreasing of the spatial scales due to the rapid rotation, we propose the subgrid model of the eddy diffusivity, which is used in the large-scale model. This approach makes it possible to model realistic regimes with small Ekman and Rossby numbers ($E\sim 10^{-14}$, $R_o \sim 10^{-8}$) and a sufficiently large Rayleigh number $R_a \sim 10^{12}$. The obtained estimate of the averaged kinetic energy is comparable with observations. The model includes rotation of the solid core due to the viscous torque.

physics.flu-dyn↗

arXiv2003

The shell model approach to the rotating turbulence

Applications of the shell model of turbulence to the case of rapidly rotating bodies are considered. Starting from the classical GOY model we introduce the Coriolis force and obtain a $\sim k^{-2}$ spectrum for 3D hydrodynamical turbulence for the free decay regime as well for the regime with external forcing. Additional modifications of the GOY model providing a realistic form of the helicity are proposed.

physics.flu-dyn↗