arXiv subjects

Bai Song

Publications and source records attributed to Bai Song.

28 records · Page 2Linked to original sources

arXiv2022

Strong suppression of near-field thermal transport between twisted bilayer graphene near the magic angle

Twisted bilayer graphene (TBLG) has recently emerged as a versatile platform for studying a variety of exotic transport phenomena. Here, we present a theoretical study of near-field thermal radiation between suspended TBLG with a focus on the magic angle. Within the chirally symmetric continuum model, we observe a suppressed heat flow when approaching the magic angle owing to a reduced Drude weight, with greater suppressions at lower temperatures and larger gap sizes. When the chemical potential lies in the energy gap near the charge neutrality point, more than 100-fold heat-flow variation can be achieved at 50 K within 0.25°of twist. By reducing the electron scattering rate, the radiation spectrum near the magic angle dramatically narrows, leading to over 10,000-fold of suppression. In addition, supported TBLG is briefly considered to facilitate experimental measurement. With rationally tailored substrates, the heat-flow contrast can still exceed 1000. We also discuss lattice relaxation effect in terms of the interlayer coupling energy, finding that a stronger coupling leads to a smaller heat-flow contrast and more prominent multiband transport. Our results highlight the great potential of magic-angle TBLG in thermal transport, especially for controlling thermal radiation.

cond-mat.mes-hall↗

arXiv2021

Giant radiative thermal rectification using an intrinsic semiconductor film

Rectification of heat flow via a thermal diode is not only of fundamental interest, but can also enable a range of novel applications in thermal management and energy conversion. However, despite decades of extensive research, large rectification ratios of practical importance have yet to be demonstrated. Here, we theoretically achieve giant rectification ratios (3 to almost 5 orders of magnitude) by leveraging near-field radiative thermal transport between two parallel planes. Guided by a rational design approach centering on the electromagnetic local density of states (LDOS), we employ a thin film of an intrinsic semiconductor-such as silicon-as one terminal of our radiative thermal diodes, which provides the necessary nonlinearity and a substantial LDOS contrast as the temperature bias is flipped. For the other terminal, we explore two kinds of materials which either serve as a narrowband or a broadband filter, both capable of converting the large LDOS contrast into giant thermal rectification. We further consider representative multilayer configurations in order to block backside radiation and improve mechanical stability. All the diodes perform well over a wide range of film thicknesses, gap sizes, and temperatures. Our work offers an opportunity for realizing thermal diodes with unprecedented rectification ratios.

cond-mat.mes-hall↗

arXiv2021

Radiative thermal diode via hyperbolic metamaterials

Hyperbolic metamaterials (HMMs) support propagating waves with arbitrarily large wavevectors over broad spectral ranges, and are uniquely valuable for engineering radiative thermal transport in the near field. Here, by employing a rational design approach based on the electromagnetic local density of states, we demonstrate the ability of HMMs to substantially rectify radiative heat flow. Our idea is to establish a forward-biased scenario where the two HMM-based terminals of a thermal diode feature overlapped hyperbolic bands which result in a large heat current, and suppress the reverse heat flow by creating spectrally mismatched density of states as the temperature bias is flipped. As an example, we present a few high-performance thermal diodes by pairing HMMs made of polar dielectrics and metal-to-insulator transition (MIT) materials in the form of periodic nanowire arrays, and considering three representative kinds of substrates. Upon optimization, we theoretically achieve a rectification ratio of 324 at a 100 nm gap, which remains greater than 148 for larger gap sizes up to 1 um over a wide temperature range. The maximum rectification represents an almost 1000-fold increase compared to a bulk diode using the same materials, and is twice that of state-of-the-art designs. Our work highlights the potential of HMMs for rectifying radiative heat flow, and may find applications in advanced thermal management and energy conversion systems.

physics.optics↗

arXiv2021

Thin-film radiative thermal diode with large rectification

We propose a mechanism to substantially rectify radiative heat flow by matching thin films of metal-to-insulator transition materials and polar dielectrics in the electromagnetic near field. By leveraging the distinct scaling behaviors of the local density of states with film thickness for metals and insulators, we theoretically achieve rectification ratios over 140-a 10-fold improvement over the state of the art-with nanofilms of vanadium dioxide and cubic boron nitride in the parallel-plane geometry at experimentally feasible gap sizes (~100 nm). Our rational design offers relative ease of fabrication, flexible choice of materials, and robustness against deviations from optimal film thicknesses. We expect this work to facilitate the application of thermal diodes in solid-state thermal circuits and energy conversion devices.

physics.app-ph↗

arXiv2021

Near-field thermal transport between twisted bilayer graphene

Active control of heat flow is of both fundamental and applied interest in thermal management and energy conversion. Here, we present a fluctuational electrodynamic study of thermal radiation between twisted bilayer graphene (TBLG), motivated by its unusual and highly tunable plasmonic properties. We show that near-field heat flow can vary by more than 10-fold over only a few degrees of twist, and identify special angles leading to heat flow extrema. These special angles are dictated by the Drude weight in the intraband optical conductivity of TBLG, and are roughly linear with the chemical potential. Further, we observe multiband thermal transport due to the increasing role of interband transitions as the twist angle decreases, in analogy to monolayer graphene in a magnetic field. Our findings are understood via the surface plasmons in TBLG, and highlight its potential for manipulating radiative heat flow.

cond-mat.mes-hall↗

arXiv2019

Optical properties of cubic boron arsenide

The ultrahigh thermal conductivity of boron arsenide makes it a promising material for next-generation electronics and optoelectronics. In this work, we report measured optical properties of cubic boron arsenide crystals including the complex dielectric function, refractive index, and absorption coefficient in the ultraviolet, visible, and near-infrared wavelength range. The data were collected at room temperature using spectroscopic ellipsometry as well as transmission and reflection spectroscopy. We further calculate the optical response using density functional and many-body perturbation theory, considering quasiparticle and excitonic corrections. The computed values for the direct and indirect band gaps (4.25 eV and 2.07 eV) agree well with the measured results (4.12 eV and 2.02 eV). Our findings contribute to the effort of using boron arsenide in novel electronic and optoelectronic applications that take advantage of its demonstrated ultrahigh thermal conductivity and predicted high ambipolar carrier mobility.

cond-mat.mtrl-sci↗

arXiv2019

Observation of second sound in graphite at temperatures above 100 K

Wavelike thermal transport in solids, referred to as second sound, has until now been an exotic phenomenon limited to a handful of materials at low temperatures. This has restricted interest in its occurrence and in its potential applications. Through time-resolved optical measurements of thermal transport on 5-20 μm length scales in graphite, we have made direct observations of second sound at temperatures above 100 K. The results are in qualitative agreement with ab initio calculations that predict wavelike phonon hydrodynamics on ~ 1-μm length scale up to almost room temperature. The results suggest an important role of second sound in microscale transient heat transport in two-dimensional and layered materials in a wide temperature range.

cond-mat.mes-hall↗

arXiv2018

Simultaneously high electron and hole mobilities in cubic boron-V compounds: BP, BAs and BSb

Through first-principles calculations, the phonon-limited transport properties of cubic boron-V compounds (BP, BAs and BSb) are studied. We find that the high optical phonon frequency in these compounds leads to the substantial suppression of polar scattering and the reduction of inter-valley transition mediated by large-wavevector optical phonons, both of which significantly facilitate charge transport. We also discover that BAs simultaneously has a high hole mobility (2110 cm2/V-s) and electron mobility (1400 cm2/V-s) at room temperature, which is rare in semiconductors. Our findings present a new insight in searching high mobility polar semiconductors, and point to BAs as a promising material for electronic and photovoltaic devices in addition to its predicted high thermal conductivity.

cond-mat.mtrl-sci↗

arXiv2017

Phonon Hydrodynamic Heat Conduction and Knudsen Minimum in Graphite

In the hydrodynamic regime, phonons drift with a nonzero collective velocity under a temperature gradient, reminiscent of viscous gas and fluid flow. The study of hydrodynamic phonon transport has spanned over half a century but has been mostly limited to cryogenic temperatures (~1 K) and more recently to low-dimensional materials. Here, we identify graphite as a three-dimensional material that supports phonon hydrodynamics at significantly higher temperatures (~100 K) based on first-principles calculations. In particular, by solving the Boltzmann equation for phonon transport in graphite ribbons, we predict that phonon Poiseuille flow and Knudsen minimum can be experimentally observed above liquid nitrogen temperature. Further, we reveal the microscopic origin of these intriguing phenomena in terms of the dependence of the effective boundary scattering rate on momentum-conserving phonon-phonon scattering processes and the collective motion of phonons. The significant hydrodynamic nature of phonon transport in graphite is attributed to its strong intralayer sp2 hybrid bonding and weak van der Waals interlayer interactions. As a boundary-sensitive transport regime, phonon hydrodynamics opens up new possibilities for thermal management and energy conversion.

cond-mat.mtrl-sci↗

arXiv2017

Nanostructured Polymer Films with Metal-like Thermal Conductivity

Thermally conductive polymers are of fundamental interest and can also be exploited in thermal management applications. Recent studies have shown stretched polymers can achieve high thermal conductivity. However, the transport mechanisms of heat in thermally conductive polymers have yet to be elucidated. Here we report a method for scalable fabrication of polyethylene films with a high thermal conductivity of 62 W/m-K. The achieved thermal conductivity is over two orders-of-magnitude greater than that of typical polymers (~0.1 W/m-K), and exceeds those of many metals and ceramics used as traditional heat conductors. Careful structural studies are carried out and reveal that the film consists of nanofibers with crystalline and amorphous regions. Contrary to conventional wisdom, we reveal the importance of the amorphous morphology in achieving such high thermal conductivity, rather than simply from enhancements in the degree of crystallinity and crystallite alignment. The amorphous phase reaches a remarkably high thermal conductivity of ~16 W/m-K. Even still, we identify that the presence of this amorphous phase is the dominant factor as the film thermal conductivity is still much lower than the predicted values for bulk single-crystal polyethylene (237 K/m-K). This work lays the foundation for the rational design and synthesis of thermally conductive polymers, and opens up new opportunities for advanced heat management, particularly when flexible, lightweight, chemically inert and electrically insulating thermal conductors are desired.

cond-mat.mtrl-sci↗