SearcharxivSearch

arXiv subjects

Bailing Tian

Publications and source records attributed to Bailing Tian.

7 recordsLinked to original sources

Some Modifications to Our End-to-End UAV Planner

The one-stage planner YOPO maps a single depth image and the robot state directly to a set of candidate trajectories, trained by backpropagating through differentiable trajectory costs. This yields dense, geometrically informative supervision, but inherits the pathologies of soft-constrained optimization: the safety cost competes with the smoothness and goal-reaching terms, is non-convex across homotopy classes, and the single-piece polynomial is limited in expressiveness. In this report, we summarize several effective modifications. We adopt a two-piece MINCO parameterization, trading time for smoothness without altering the trajectory's spatial profile. We further lift YOPO's multi-modal prediction to span distinct homotopy classes, treating each motion primitive as a homotopy anchor that confines the trajectory to a feasible basin - without explicit safe-flight-corridor construction or front-end search. For dynamic feasibility, we impose barrier penalties on velocity and acceleration together with a curvature-dependent speed limit whose gradient acts only on the velocity, producing an adaptive-speed behavior that decelerates in cluttered regions or sharp turns. We replace score regression with a ranking loss, preventing small score errors from reordering the candidate set. These yield richer trajectory representations, safer obstacle avoidance, and more direct flight paths.

cs.RO

ParaMaP: Parallel Mapping and Collision-free Motion Planning for Reactive Robot Manipulation

Real-time and collision-free motion planning remains challenging for robotic manipulation in unknown environments due to continuous perception updates and the need for frequent online replanning. To address these challenges, we propose a parallel mapping and motion planning framework that tightly integrates Euclidean Distance Transform (EDT)-based environment representation with a sampling-based model predictive control (SMPC) planner. On the mapping side, a dense distance-field-based representation is constructed using a GPU-based EDT and augmented with a robot-masked update mechanism to prevent false self-collision detections during online perception. On the planning side, motion generation is formulated as a stochastic optimization problem with a unified objective function and efficiently solved by evaluating large batches of candidate rollouts in parallel within a SMPC framework, in which a geometrically consistent pose tracking metric defined on SE(3) is incorporated to ensure fast and accurate convergence to the target pose. The entire mapping and planning pipeline is implemented on the GPU to support high-frequency replanning. The effectiveness of the proposed framework is validated through extensive simulations and real-world experiments on a 7-DoF robotic manipulator. More details are available at: https://zxw610.github.io/ParaMaP.

cs.RO

YOPO-Rally: A Sim-to-Real Single-Stage Planner for Off-Road Terrain

Off-road navigation remains challenging for autonomous robots due to the harsh terrain and clustered obstacles. In this letter, we extend the YOPO (You Only Plan Once) end-to-end navigation framework to off-road environments, explicitly focusing on forest terrains, consisting of a high-performance, multi-sensor supported off-road simulator YOPO-Sim, a zero-shot transfer sim-to-real planner YOPO-Rally, and an MPC controller. Built on the Unity engine, the simulator can generate randomized forest environments and export depth images and point cloud maps for expert demonstrations, providing competitive performance with mainstream simulators. Terrain Traversability Analysis (TTA) processes cost maps, generating expert trajectories represented as non-uniform cubic Hermite curves. The planner integrates TTA and the pathfinding into a single neural network that inputs the depth image, current velocity, and the goal vector, and outputs multiple trajectory candidates with costs. The planner is trained by behavior cloning in the simulator and deployed directly into the real-world without fine-tuning. Finally, a series of simulated and real-world experiments is conducted to validate the performance of the proposed framework.

cs.RO

YOPOv2-Tracker: An End-to-End Agile Tracking and Navigation Framework from Perception to Action

Traditional target tracking pipelines including detection, mapping, navigation, and control are comprehensive but introduce high latency, limitting the agility of quadrotors. On the contrary, we follow the design principle of "less is more", striving to simplify the process while maintaining effectiveness. In this work, we propose an end-to-end agile tracking and navigation framework for quadrotors that directly maps the sensory observations to control commands. Importantly, leveraging the multimodal nature of navigation and detection tasks, our network maintains interpretability by explicitly integrating the independent modules of the traditional pipeline, rather than a crude action regression. In detail, we adopt a set of motion primitives as anchors to cover the searching space regarding the feasible region and potential target. Then we reformulate the trajectory optimization as regression of primitive offsets and associated costs considering the safety, smoothness, and other metrics. For tracking task, the trajectories are expected to approach the target and additional objectness scores are predicted. Subsequently, the predictions, after compensation for the estimated lumped disturbance, are transformed into thrust and attitude as control commands for swift response. During training, we seamlessly integrate traditional motion planning with deep learning by directly back-propagating the gradients of trajectory costs to the network, eliminating the need for expert demonstration in imitation learning and providing more direct guidance than reinforcement learning. Finally, we deploy the algorithm on a compact quadrotor and conduct real-world validations in both forest and building environments to demonstrate the efficiency of the proposed method.

cs.RO

Fixed-time Disturbance Observer-Based MPC Robust Trajectory Tracking Control of Quadrotor

In this paper, a fixed-time disturbance observerbased model predictive control algorithm is proposed for trajectory tracking of quadrotor in the presence of disturbances. First, a novel multivariable fixed-time disturbance observer is proposed to estimate the lumped disturbances. The bi-limit homogeneity and Lyapunov techniques are employed to ensure the convergence of estimation error within a fixed convergence time, independent of the initial estimation error. Then, an observerbased model predictive control strategy is formulated to achieve robust trajectory tracking of quadrotor, attenuating the lumped disturbances and model uncertainties. Finally, simulations and real-world experiments are provided to illustrate the effectiveness of the proposed method.

eess.SY

CTE-MLO: Continuous-time and Efficient Multi-LiDAR Odometry with Localizability-aware Point Cloud Sampling

In recent years, LiDAR-based localization and mapping methods have achieved significant progress thanks to their reliable and real-time localization capability. Considering single LiDAR odometry often faces hardware failures and degeneracy in practical scenarios, Multi-LiDAR Odometry (MLO), as an emerging technology, is studied to enhance the performance of LiDAR-based localization and mapping systems. However, MLO can suffer from high computational complexity introduced by dense point clouds that are fused from multiple LiDARs, and the continuous-time measurement characteristic is constantly neglected by existing LiDAR odometry. This motivates us to develop a Continuous-Time and Efficient MLO, namely CTE-MLO, which can achieve accurate and real-time estimation using multi-LiDAR measurements through a continuous-time perspective. In this paper, the Gaussian process estimation is naturally combined with the Kalman filter, which enables each LiDAR point in a point stream to query the corresponding continuous-time trajectory using its time instants. A decentralized multi-LiDAR synchronization scheme is also devised to combine points from separate LiDARs into a single point cloud without the primary LiDAR assignment. Moreover, with the aim of improving the real-time performance of MLO without sacrificing robustness, a point cloud sampling strategy is designed with the consideration of localizability. To this end, CTE-MLO integrates synchronization, localizability-aware sampling, continuous-time estimation, and voxel map management within a Kalman filter framework, which can achieve high accuracy and robust continuous-time estimation within only a few linear iterations. The effectiveness of the proposed method is demonstrated through various scenarios, including public datasets and real-world applications. The code is available at https://github.com/shenhm516/CTE-MLO to benefit the community.

cs.RO

Sampling-Based Hierarchical Trajectory Planning for Formation Flight

Formation flight of unmanned aerial vehicles (UAVs) poses significant challenges in terms of safety and formation keeping, particularly in cluttered environments. However, existing methods often struggle to simultaneously satisfy these two critical requirements. To address this issue, this paper proposes a sampling-based trajectory planning method with a hierarchical structure for formation flight in dense obstacle environments. To ensure reliable local sensing information sharing among UAVs, each UAV generates a safe flight corridor (SFC), which is transmitted to the leader UAV. Subsequently, a sampling-based formation guidance path generation method is designed as the front-end strategy, steering the formation to fly in the desired shape safely with the formation connectivity provided by the SFCs. Furthermore, a model predictive path integral (MPPI) based distributed trajectory optimization method is developed as the back-end part, which ensures the smoothness, safety and dynamics feasibility of the executable trajectory. To validate the efficiency of the developed algorithm, comprehensive simulation comparisons are conducted. The supplementary simulation video can be seen at https://www.youtube.com/watch?v=xSxbUN0tn1M.

cs.RO