arXiv subjects

Banafsheh Beheshtipour

Publications and source records attributed to Banafsheh Beheshtipour.

12 recordsLinked to original sources

arXiv2024

Deep Einstein@Home search for Continuous Gravitational Waves from the Central Compact Objects in the Supernova Remnants Vela Jr. and G347.3-0.5 using LIGO public data

We perform a search for continuous nearly monochromatic gravitational waves from the central compact objects associated with the supernova remnants Vela Jr. and G347.3 using LIGO O2 and O3 public data. Over $10^{18}$ different waveforms are considered, covering signal frequencies between 20-1300 Hz (20-400 Hz) for G347.3-0.5 (Vela Jr) and a very broad range of frequency derivatives. Thousands of volunteers donating compute cycles through the computing project Einstein@Home have made this endeavour possible. Following the Einstein@Home search, we perform multi-stage follow-ups of over 5 million waveforms. The selection threshold is set so that a signal could be confirmed using the first half of the LIGO O3 data. We find no significant signal candidate for either targets. Based on this null result, for G347.3-0.5, we set the most constraining upper limits to date on the amplitude of gravitational wave signals, corresponding to deformations below $10^{-6}$ in a large part of the search band. At the frequency of best strain sensitivity, near $161$ Hz, we set 90\%\ confidence upper limits on the gravitational wave intrinsic amplitude of $h_0^{90\%}\approx 6.2\times10^{-26}$. Over most of the frequency range our upper limits are a factor of 10 smaller than the indirect age-based upper limit. For Vela Jr., near $163$ Hz, we set $h_0^{90\%}\approx 6.4\times10^{-26}$. Over most of the frequency range our upper limits are a factor of 15 smaller than the indirect age-based upper limit. The Vela Jr. upper limits presented here are slightly less constraining than the most recent upper limits of \cite{ligo_o3a_c_v} but they apply to a broader set of signals.

gr-qc↗

arXiv2024

X-ray Polarization of the Black Hole X-ray Binary 4U 1630-47 Challenges Standard Thin Accretion Disk Scenario

Large energy-dependent X-ray polarization degree is detected by the Imaging X-ray Polarimetry Explorer ({IXPE}) in the high-soft emission state of the black hole X-ray binary 4U 1630--47. The highly significant detection (at $\approx50σ$ confidence level) of an unexpectedly high polarization, rising from $\sim6\%$ at $2$ keV to $\sim10\%$ at $8$ keV, cannot be easily reconciled with standard models of thin accretion discs. In this work we compare the predictions of different theoretical models with the {IXPE} data and conclude that the observed polarization properties are compatible with a scenario in which matter accretes onto the black hole through a thin disc, covered by a partially-ionized atmosphere flowing away at mildly relativistic velocities.

astro-ph.HE↗

arXiv2022

New Constraints on the Spin of the Black Hole Cygnus X-1 and the Physical Properties of its Accretion Disk Corona

We present a new analysis of NuSTAR and Suzaku observations of the black hole Cygnus X-1 in the intermediate state. The analysis uses kerrC, a new model for analyzing spectral and spectropolarimetric X-ray observations of black holes. kerrC builds on a large library of simulated black holes in X-ray binaries. The model accounts for the X-ray emission from a geometrically thin, optically thick accretion disk, the propagation of the X-rays through the curved black hole spacetime, the reflection off the accretion disk, and the Comptonization of photons in coronae of different 3-D shapes and physical properties before and after the reflection. We present the results from using kerrC for the analysis of archival NuSTAR and Suzaku observations taken on May 27-28, 2015. The best wedge-shaped corona gives a better fit than the cone-shaped corona. Although we included cone-shaped coronae in the funnel regions above and below the black hole to resemble to some degree the common assumption of a compact lamppost corona hovering above and/or below the black hole, the fit chooses a very large version of this corona that makes it possible to Comptonize a sufficiently large fraction of the accretion disk photons to explain the observed power law emission. The analysis indicates a dimensionless black hole spin parameter a between 0.86 and 0.92. The kerrC model provides new insights about the radial distribution of the energy flux of returning and coronal emission irradiating the accretion disk. kerrC furthermore predicts small polarization fractions around 1% in the 2-8 keV energy range of the recently launched Imaging X-ray Polarimetry Explorer.

astro-ph.HE↗

arXiv2022

Performance of the X-Calibur Hard X-Ray Polarimetry Mission during its 2018/19 Long-Duration Balloon Flight

X-Calibur is a balloon-borne telescope that measures the polarization of high-energy X-rays in the 15--50keV energy range. The instrument makes use of the fact that X-rays scatter preferentially perpendicular to the polarization direction. A beryllium scattering element surrounded by pixellated CZT detectors is located at the focal point of the InFOCμS hard X-ray mirror. The instrument was launched for a long-duration balloon (LDB) flight from McMurdo (Antarctica) on December 29, 2018, and obtained the first constraints of the hard X-ray polarization of an accretion-powered pulsar. Here, we describe the characterization and calibration of the instrument on the ground and its performance during the flight, as well as simulations of particle backgrounds and a comparison to measured rates. The pointing system and polarimeter achieved the excellent projected performance. The energy detection threshold for the anticoincidence system was found to be higher than expected and it exhibited unanticipated dead time. Both issues will be remedied for future flights. Overall, the mission performance was nominal, and results will inform the design of the follow-up mission XL-Calibur, which is scheduled to be launched in summer 2022.

astro-ph.IM↗

arXiv2021

New searches for continuous gravitational waves from seven fast pulsars

We conduct searches for continuous gravitational waves from seven pulsars, that have not been targeted in continuous wave searches of Advanced LIGO data before. We target emission at exactly twice the rotation frequency of the pulsars and in a small band around such frequency. The former search assumes that the gravitational wave quadrupole is changing phase-locked with the rotation of the pulsar. The search over a range of frequencies allows for differential rotation between the component emitting the radio signal and the component emitting the gravitational waves, for example the crust or magnetosphere versus the core. Timing solutions derived from the Arecibo 327-MHz Drift-Scan Pulsar Survey (AO327) observations are used. No evidence of a signal is found and upper limits are set on the gravitational wave amplitude. For one of the pulsars we probe gravitational wave intrinsic amplitudes just a factor of 3.8 higher than the spin-down limit, assuming a canonical moment of inertia of $10^{38}$ kg m$^2$. Our tightest ellipticity constraint is $1.5 \times 10^{-8}$, which is a value well within the range of what a neutron star crust could support.

astro-ph.HE↗

arXiv2021

Deep learning for clustering of continuous gravitational wave candidates II: identification of low-SNR candidates

Broad searches for continuous gravitational wave signals rely on hierarchies of follow-up stages for candidates above a given significance threshold. An important step to simplify these follow-ups and reduce the computational cost is to bundle together in a single follow-up nearby candidates. This step is called clustering and we investigate carrying it out with a deep learning network. In our first paper [1], we implemented a deep learning clustering network capable of correctly identifying clusters due to large signals. In this paper, a network is implemented that can detect clusters due to much fainter signals. These two networks are complementary and we show that a cascade of the two networks achieves an excellent detection efficiency across a wide range of signal strengths, with a false alarm rate comparable/lower than that of methods currently in use.

gr-qc↗

arXiv2020

Deep learning for clustering of continuous gravitational wave candidates

In searching for continuous gravitational waves over very many ($\approx 10^{17}$) templates , clustering is a powerful tool which increases the search sensitivity by identifying and bundling together candidates that are due to the same root cause. We implement a deep learning network that identifies clusters of signal candidates in the output of continuous gravitational wave searches and assess its performance. For loud signals our network achieves a detection efficiency higher than 97\% with a very low false alarm rate, and maintains a reasonable detection efficiency for signals with lower amplitudes, i.e. at $\lesssim$ current upper limit values.

gr-qc↗

arXiv2017

The X-ray Polarization of the Accretion Disk Coronae of Active Galactic Nuclei

Hard X-rays observed in Active Galactic Nuclei (AGNs) are thought to originate from the Comptonization of the optical/UV accretion disk photons in a hot corona. Polarization studies of these photons can help to constrain the corona geometry and the plasma properties. We have developed a ray-tracing code that simulates the Comptonization of accretion disk photons in coronae of arbitrary shape, and use it here to study the polarization of the X-ray emission from wedge and spherical coronae. We study the predicted polarization signatures for the fully relativistic and various approximate treatments of the elemental Compton scattering processes. We furthermore use the code to evaluate the impact of non-thermal electrons and cyclo-synchrotron photons on the polarization properties. Finally, we model the NuSTAR observations of the Seyfert I galaxy Mrk 335 and predict the associated polarization signal. Our studies show that X-ray polarimetry missions such as NASA's Imaging X-ray Polarimetry Explorer (IXPE) and the X-ray Imaging Polarimetry Explorer (XIPE) proposed to ESA will provide valuable new information about the physical properties of the plasma close to the event horizon of AGN black holes.

astro-ph.HE↗

arXiv2017

Design of the telescope truss and gondola for the balloon-borne X-ray polarimeter X-Calibur

X-ray polarimetry has seen a growing interest in recent years. Improvements in detector technology and focusing X-ray optics now enable sensitive astrophysical X-ray polarization measurements. These measurements will provide new insights into the processes at work in accreting black holes, the emission of X-rays from neutron stars and magnetars, and the structure of AGN jets. X-Calibur is a balloon-borne hard X-ray scattering polarimeter. An X-ray mirror with a focal length of 8 m focuses X-rays onto the detector, which consists of a plastic scattering element surrounded by Cadmium-Zinc-Telluride detectors, which absorb and record the scattered X-rays. Since X-rays preferentially scatter perpendicular to their polarization direction, the polarization properties of an X-ray beam can be inferred from the azimuthal distribution of scattered X-rays. A close alignment of the X-ray focal spot with the center of the detector is required in order to reduce systematic uncertainties and to maintain a high photon detection efficiency. This places stringent requirements on the mechanical and thermal stability of the telescope structure. During the flight on a stratospheric balloon, X-Calibur makes use of the Wallops Arc-Second Pointer (WASP) to point the telescope at astrophysical sources. In this paper, we describe the design, construction, and test of the telescope structure, as well as its performance during a 25-hour flight from Ft. Sumner, New Mexico. The carbon fiber-aluminum composite structure met the requirements set by X-Calibur and its design can easily be adapted for other types of experiments, such as X-ray imaging or spectroscopic telescopes.

astro-ph.IM↗

arXiv2016

Studies of the Origin of High-Frequency Quasi-Periodic Oscillations of Mass Accreting Black Holes in X-ray Binaries with Next-Generation X-ray Telescopes

Observations with RXTE (Rossi X-ray Timing Explorer) revealed the presence of High Frequency Quasi-Periodic Oscillations (HFQPOs) of the X-ray flux from several accreting stellar mass Black Holes. HFQPOs (and their counterparts at lower frequencies) may allow us to study general relativity in the strong gravity regime. However, the observational evidence today does not yet allow us to distinguish between different HFQPO models. In this paper we use a general relativistic ray-tracing code to investigate X-ray timing-spectroscopy and polarization properties of HFQPOs in the orbiting Hotspot model. We study observational signatures for the particular case of the 166 Hz quasi-periodic oscillation (QPO) in the galactic binary GRS 1915+105. We conclude with a discussion of the observability of spectral signatures with a timing-spectroscopy experiment like the LOFT (Large Observatory for X-ray Timing) and polarization signatures with space-borne X-ray polarimeters such as IXPE (Imaging X-ray Polarimetry Explorer), PolSTAR (Polarization Spectroscopic Telescope Array), PRAXyS (Polarimetry of Relativistic X-ray Sources), or XIPE (X-ray Imaging Polarimetry Explorer). A high count-rate mission like LOFT would make it possible to get a QPO phase for each photon, enabling the study of the QPO-phase-resolved spectral shape and the correlation between this and the flux level. Owing to the short periods of the HFQPOs, first-generation X-ray polarimeters would not be able to assign a QPO phase to each photon. The study of QPO-phase-resolved polarization energy spectra would thus require simultaneous observations with a first-generation X-ray polarimeter and a LOFT-type mission.

astro-ph.HE↗

arXiv2016

Testing General Relativity's No-Hair Theorem with X-Ray Observations of Black Holes

Despite its success in the weak gravity regime, General Relativity (GR) has yet to be verified in the regime of strong gravity. In this paper, we present the results of detailed ray tracing simulations aiming at clarifying if the combined information from X-ray spectroscopy, timing, and polarization observations of stellar mass and supermassive black holes can be used to test GR's no-hair theorem. The latter states that stationary astrophysical black holes are described by the Kerr-family of metrics with the black hole mass and spin being the only free parameters. We use four "non-Kerr metrics", some phenomenological in nature and others motivated by alternative theories of gravity, and study the observational signatures of deviations from the Kerr metric. Particular attention is given to the case when all the metrics are set to give the same Innermost Stable Circular Orbit (ISCO) in quasi-Boyer Lindquist coordinates. We give a detailed discussion of similarities and differences of the observational signatures predicted for BHs in the Kerr metric and the non-Kerr metrics. We emphasize that even though some regions of the parameter space are nearly degenerate even when combining the information from all observational channels, X-ray observations of very rapidly spinning black holes can be used to exclude large regions of the parameter space of the alternative metrics. Although it proves difficult to distinguish between the Kerr and non-Kerr metrics for some portions of the parameter space, the observations of very rapidly spinning black holes like Cyg X-1 can be used to rule out large regions for several black hole metrics.

astro-ph.HE↗

arXiv2015

X-Ray Polarimetry with the Polarization Spectroscopic Telescope Array (PolSTAR)

This paper describes the Polarization Spectroscopic Telescope Array (PolSTAR), a mission proposed to NASA's 2014 Small Explorer (SMEX) announcement of opportunity. PolSTAR measures the linear polarization of 3-50 keV (requirement; goal: 2.5-70 keV) X-rays probing the behavior of matter, radiation and the very fabric of spacetime under the extreme conditions close to the event horizons of black holes, as well as in and around magnetars and neutron stars. The PolSTAR design is based on the technology developed for the Nuclear Spectroscopic Telescope Array (NuSTAR) mission launched in June 2012. In particular, it uses the same X-ray optics, extendable telescope boom, optical bench, and CdZnTe detectors as NuSTAR. The mission has the sensitivity to measure ~1% linear polarization fractions for X-ray sources with fluxes down to ~5 mCrab. This paper describes the PolSTAR design as well as the science drivers and the potential science return.

astro-ph.IM↗