arXiv subjects

Baohong Guo

Publications and source records attributed to Baohong Guo.

11 recordsLinked to original sources

arXiv2025

Research on trigger technology of MRPC TOF-PET system and imaging results of $^{22}$Na radioactive source

This study focuses on developing a self-triggered data acquisition system and a noise reduction algorithm for the Multi-gap Resistive Plate Chamber (MRPC) Time-of-Flight Positron Emission Tomography (TOF-PET) system. The system integrates a fast front-end amplifier, a waveform digitization module based on the DRS4 chip, and an efficient noise reduction algorithm to address challenges such as high noise trigger rates and precise gamma-ray detection. The proposed self-triggered system, through threshold discrimination, coincidence logic, and continuous oscillation check, reduces the noise trigger rate to 0.004 Hz. Experimental results show that the system accurately localizes and images the $^{22}$Na radioactive source, and has a good time resolution of 162 ps FWHM for 0.511 MeV gamma rays.

physics.ins-det↗

arXiv2025

Positive streamer discharge simulations in humid air: uncertainty in input data and sensitivity analysis

We study how the choice of input data affects simulations of positive streamers in humid air, focusing on H2O cross sections, photoionization models, and chemistry sets. Simulations are performed in air with a mole fraction of 0%, 3% or 10% H2O using an axisymmetric fluid model. Five H2O cross section sets are considered, which lead to significant differences in the resulting electron attachment coefficient. As a result, the streamer velocity can vary by up to about 50% with 10% H2O. We compare results with three photoionization models: the Naidis model for humid air, the Aints model for humid air, and the standard Zheleznyak model for dry air. With the Naidis and in particular the Aints model, there is a significant reduction in photoionization with higher humidities. This results in higher streamer velocities and maximal electric fields, and it can also cause streamer branching in our axisymmetric simulations. Three humid air chemistry sets are considered. Differences between these sets, particularly in the formation of water clusters around positive ions, cause the streamer velocity to vary by up to about 50% with 10% H2O. A sensitivity analysis is performed to identify the most important chemical reactions in these chemistries.

physics.plasm-ph↗

arXiv2023

3D particle-in-cell simulations of negative and positive streamers in C4F7N-CO2 mixtures

We investigate negative and positive streamers in C4F7N-CO2 mixtures through simulations. These mixtures are considered to be more environmentally friendly than the insulating gas SF6 that is widely used in high voltage technology. Simulations are performed using a 3D particle-in-cell model. Negative streamers can propagate when the background field is close to the critical field. We relate this to their short conductive channels, due to rapid electron attachment, which limits their field enhancement. Positive streamers also require a background field close to the critical field, and in addition a source of free electrons ahead of them. In our simulations these electrons are provided through an artificial stochastic background ionization process as no efficient photoionization process is known for these gases. In 3D, we can only simulate the early inception stage of positive discharges, due to the extremely high electric fields and electron densities that occur. Qualitative 2D Cartesian simulations show that the growth of these discharges is highly irregular, resulting from incoming negative streamers that connect to existing channels. The inclusion of a stochastic background ionization process also has an interesting effect on negative discharges: new streamers can be generated behind previous ones, thereby forming a chain of negative streamers.

physics.plasm-ph↗

arXiv2023

3D modeling of positive streamers in air with inhomogeneous density

We study the effect of an inhomogeneous gas density on positive streamer discharges in air using a 3D fluid model with stochastic photoionization, generalizing earlier work with a 2D axisymmetric model by Starikovskiy and Aleksandrov (2019 Plasma Sources Sci. Technol. 28 095022). We consider various types of planar and (hemi)spherical gas density gradients. Streamers propagate from a region of density n0 towards a region of higher or lower gas density n1, where n0 corresponds to 300 K and 1 bar. We observe that streamers can always propagate into a region with a lower gas density. When streamers enter a region with a higher gas density, branching can occur at the density gradient, with branches growing in a flower-like pattern over the gradient surface. Depending on the gas density ratio, the gradient width and other factors, narrow branches are able to propagate into the higher-density gas. In a planar geometry, we find that such propagation is possible up to a gas density slope of 3.5n0/mm, although this value depends on a number of conditions, such as the gradient angle. Surprisingly, a higher applied voltage makes it more difficult for streamers to penetrate into the high-density region, due to an increase of the primary streamer's radius.

physics.plasm-ph↗

arXiv2023

A computational study of accelerating, steady and fading negative streamers in ambient air

We study negative streamers in ambient air using a 2D axisymmetric fluid model. Depending on the background electric field, we observe accelerating, steady and fading negative streamers. Fading occurs in low background fields, when negative streamers lose their field enhancement and when their velocities become comparable to their maximal electron drift velocities. Our focus is on the steady propagation mode, during which streamer properties like radius and velocity hardly change. However, this mode is unstable, in the sense that a small change in conditions leads to acceleration or deceleration. We observe steady negative streamers in background fields ranging from 9.19 kV/cm to 15.75 kV/cm, indicating that there is no unique steady propagation field (or stability field). Another finding is that steady negative streamers are able to keep propagating over tens of centimeters, with only a finite conductive length behind their heads, similar to steady positive streamers. Approximately linear relationships are observed between the optical diameter and properties like the streamer velocity and the streamer head potential. From these linear relations, we obtain rough lower bounds of about 0.27 mm to 0.35 mm for the minimal optical diameter of steady negative streamers. The lowest background field in which a steady negative streamer could be obtained is 9.19 kV/cm. In contrast, steady positive streamers have recently been obtained in a background field as low as 4.05 kV/cm. We find that the properties of steady negative and positive streamers differ significantly. For example, for steady negative streamers the ratio between streamer velocity and maximal electron drift velocity ranges from about 2 to 4.5, whereas for steady positive streamers this ratio ranges from about 0.05 to 0.26.

physics.plasm-ph↗

arXiv2023

A computational study on the energy efficiency of species production by single-pulse streamers in air

We study the energy efficiency of species production by streamer discharges with a single voltage pulse in atmospheric dry air, using a 2D axisymmetric fluid model. Sixty different positive streamers are simulated by varying the electrode length, the pulse duration and the applied voltage. Between these cases, the streamer radius and velocity vary by about an order of magnitude, but the variation in the maximal electric field is significantly smaller, about 30%. We find that G-values for the production of N(4S), O(3P), NO and N2O, which have relatively high activation energies, vary by about 30% to 55%. This variation is mainly caused by two factors: differences in the fraction of energy deposited in the streamer head region, and differences in the maximal electric field at the streamer head. When accounting for both factors, our computed G-values are in good agreement with an analytic estimate proposed by Naidis (2012 Plasma Sources Sci. Technol. 21 042001). We also simulate negative streamers and find that their production of N(4S), O(3P) and NO is less energy efficient. The results suggest that energy efficiency can be increased by reducing Joule heating in the streamer channel and by increasing the maximal electric field at the streamer head, for example by using short voltage pulses with a high applied voltage.

physics.plasm-ph↗

arXiv2022

A computational study of steady and stagnating positive streamers in N2-O2 mixtures

In this paper, we address two main topics: steady propagation fields for positive streamers in air and streamer deceleration in fields below the steady propagation field. We generate constant-velocity positive streamers in air with an axisymmetric fluid model, by initially adjusting the applied voltage based on the streamer velocity. After an initial transient, we observe steady propagation for velocities of $3\times10^4$ m/s to $1.2\times10^5$ m/s, during which streamer properties and the background field do not change. This propagation mode is not fully stable, in the sense that a small change in streamer properties or background field eventually leads to acceleration or deceleration. An important finding is that faster streamers are able to propagate in significantly lower background fields than slower ones, indicating that there is no unique stability field. We relate the streamer radius, velocity, maximal electric field and background electric field to a characteristic time scale for the loss of conductivity. This relation is qualitatively confirmed by studying streamers in N2-O2 mixtures with less oxygen than air. In such mixtures, steady streamers require lower background fields, due to a reduction in the attachment and recombination rates. We also study the deceleration of streamers, which is important to predict how far they can propagate in a low field. Stagnating streamers are simulated by applying a constant applied voltage. We show how the properties of these streamers relate to the steady cases, and present a phenomenological model with fitted coefficients that describes the evolution of the velocity and radius. Finally, we compare the lengths of the stagnated streamers with predictions based on the conventional stability field.

physics.plasm-ph↗

arXiv2018

The study of a new time reconstruction method for MRPC read out by waveform digitizer

The measurement of the $K^{\pm}$ production in the Semi-Inclusive Deep Inelastic Scattering (SIDIS) can provide further knowledge about the structure of nucleon, and thus it is purposed in the Solenoidal Large Intensity Device(SoLID) at Jefferson Lab(JLab). In this experiment, the identification of the kaons is planed to be accomplished with the Multi-gap Resistive Plate Chambers(MRPC), and the requirement for the time resolution is around 20 $\rm ps$. This is very challenging for the present MRPC systems (typical resolution 60 $\rm ps$), while in this paper, it is proved that the performance can be improved largely if the signal waveform is obtained and analyzed with a neural network method. In a cosmic ray experiment, the time resolution of a 6-gap 0.25$\rm mm$-thick MRPC reaches 36 $\rm ps$ with this method, and a even better performance is expected with a thinner MRPC.

physics.ins-det↗

arXiv2018

A standalone simulation framework of the MRPC detector read out in waveforms

Dedicated detector simulations are very important for the success of high energy physics experiments. They not only bring benefits to the optimization of the detectors, but can also improve the precision of the physics results. To design a Multi-gap Resistive Plate Chamber (MRPC) with a very good time resolution, a detailed monte-carlo simulation of the detector is needed and described in this paper. The simulation can produce detector signal waveforms which contain a complete information about the events. The detector performance filled with different gas mixtures is studied, and comparison between simulation and experimental results show a good agreement.

physics.ins-det↗

arXiv2018

A neural network based algorithm for MRPC time reconstruction

Multi-gap Resistive Plate Chamber(MRPC) is a widely used timing detector with a typical time resolution of about 60 ps. This makes MRPC an optimal choice for the time of flight(ToF) system in many large physics experiments. The prior work on improving the time resolution is mainly focused on altering the detector geometry, and therefore the improvement of the data analysis algorithm has not been fully explored. This paper proposes a new time reconstruction algorithm based on the deep neural networks(NN) and improves the MRPC time resolution by about 10 ps. Since the development of the high energy physics experiments has pushed the timing requirements for the MRPC to a higher level, this algorithm could become a potential substitution of the time over threshold(ToT) method to achieve a time resolution below 30 ps.

physics.ins-det↗

arXiv2015

Online aging study of high rate MRPC

With the constant increase of accelerator luminosity, the rate requirements of the MRPC detectors become important. In the same time, aging problem of the detector has to be studied meticulously. An online aging test system is set up in our Lab. The setup of the system is described and the purpose is to study the performance stability during the long time running under high luminosity environment. The high rate MRPC has been irradiated by X-ray for 36 days and accumulated charge density reached 0.1C/cm2. No obvious performance degradation is observed for the detector.

physics.ins-det↗