arXiv subjects

Baptiste Gault

Publications and source records attributed to Baptiste Gault.

At least 37 records · Page 2Linked to original sources

arXiv2025

Direct observation of nanoscale pinning centers in Ce(Co0.8Cu0.2)5.4 permanent magnets

Permanent magnets containing rare earth elements are essential components for the electrification of society. Ce(Co1-xCux)5 permanent magnets are a model system known for their substantial coercivity, yet the underlying mechanism remains unclear. Here, we investigate Ce(Co0.8Cu0.2)5.4 magnets with a coercivity of ~1 T. Using transmission electron microscopy (TEM) and atom probe tomography (APT), we identify a nanoscale cellular structure formed by spinodal decomposition. Cu-poor cylindrical cells (~5-10 nm in diameter, ~20 nm long) have a disordered CeCo5-type structure and a composition Ce(Co0.9Cu0.1)5.3. Cu-rich cell boundaries are ~ 5 nm thick and exhibit a modified CeCo5 structure, with Cu ordered on the Co sites and a composition Ce(Co0.7Cu0.3)5.0. Micromagnetic simulations demonstrate that the intrinsic Cu concentration gradients up to 12 at.% Cu/nm lead to a spatial variation in magnetocrystalline anisotropy and domain wall energy, resulting in effective pinning and high coercivity. Compared to Sm2Co17-type magnets, Ce(Co0.8Cu0.2)5.4 displays a finer-scale variation of conventional pinning with lower structural and chemical contrast in its underlying nanostructure. The identification of nanoscale chemical segregation in nearly single-phase Ce(Co0.8Cu0.2)5.4 magnets provides a microstructural basis for the long-standing phenomenon of "giant intrinsic magnetic hardness" in systems such as SmCo5-xMx, highlighting avenues for designing rare-earth-lean permanent magnets via controlled nanoscale segregation.

cond-mat.mtrl-sci↗

arXiv2025

Spatially resolving superconductivity in type-II superconductors

Superconductivity is identified by the emergence of a macroscopic zero-resistance state, typically inferred from a vanishing four-probe voltage at finite current. That inference assumes spatially uniform conduction-e.g., at least one continuous superconducting path between the current leads and voltage electrodes that sample a finite potential gradient-and can fail if the drive current bypasses the electrodes or if narrow filaments short the current contacts. Here we introduce a methodology to test these assumptions in superconductors, by using spatially resolved measurements of local variations in dc using cryogenic conductive atomic-force microscopy (cAFM). Using Fe(Se,Te) as a model system, we find that despite bulk measurements consistent with a homogeneous superconducting state, the material exhibits a heterogeneous conducting landscape: micrometre-scale superconducting regions coexist with relatively insulating areas. We further show that cAFM resolves conductance fluctuations at 20 K (> TC) that vary between repeated scans, consistent with expectations for short-lived, pre-formed Cooper pairs in the BCS-BEC crossover regime. These results establish cAFM as a practical tool to validate assumptions underlying four-probe transport and underscore the need for direct spatial probes in materials whose macroscopic response can conceal nanoscale inhomogeneity. Accurate identification of macroscopic properties is critical for materials classes like superconductors that are defined by their macroscopic properties.

cond-mat.supr-con↗

arXiv2025

Electrochemically-driven formation of Intermetallic Cu3ZnLi2 alters Li-transport in nanostructured bimetallic battery anode

The role of Li-based batteries in the electrification of society cannot be understated, however their operational lifetime is often limited by the formation of dendrites, i.e. the localised deposition of Li that can cause shorts between the two electrodes leading to the failure of the battery. Nanocrystalline bimetallic current collectors can be used for anode-free Li-metal batteries, with improved Li plating and limited or suppressed formation of dendrites. Here, we demonstrate that the microstructure of an alpha-Brass current collector, Cu 63% Zn 37%, used in an anode-free Li-metal battery evolves during cycling. It initially had a nanocrystalline deformation layer approximately 80 nm in thickness after polishing. After 100 cycles, the initial deformed brass layer was partially converted to a ternary Laves phase Cu3ZnLi2 within a nanocrystalline brass matrix that grew to 200 - 250 nm in thickness. Upon Li stripping, the phase partially decomposes electrochemically, but what remains can sequester Li thus forming "dead Li" thereby contributing to capacity loss. We propose a mechanism for the microstructural evolution including dynamic recrystallization and phase formation. Since this ternary Laves phase emerges during electrochemical cycling alone, binary alloy current collectors must be assessed for metastable ternary phase formation under different cycling conditions to either stabilize and exploit such phases or electrochemically fully strip them.

cond-mat.mtrl-sci↗

arXiv2025

Vacuum Dealloyed Brass as Li-Metal Battery Current Collector: Effect of Zinc and Porosity

"Anode-free" lithium-metal batteries promise significantly higher energy density than conventional graphite-based lithium-ion batteries; however, lithium dendrite growth can lead to internal short circuits with associated safety risks. While porous current collectors can suppress dendrite growth, optimal porosity and composition remain unknown. Here, we show that the temperature during vapor phase dealloying (VPD) of alpha-brass (Cu63Zn37) controls the surface Zn concentration, decreasing from 8 percent to below 1 percent from 500 to 800 degrees C. The surface composition is controlled by the temperature-dependent diffusion. A battery cell maintains greater than 90 percent Coulombic efficiency (CE) over 100 cycles when the Zn content is the lowest, whereas the higher-Zn samples degraded to approximately 70 percent CE. The difference in surface composition has hence dramatic effects on battery performance, and our results demonstrate how precise compositional control enables stable lithium-metal battery operation, establishing about 1 atomic percent surface Zn as optimal for preventing capacity fading and uniform lithium plating, while establishing predictive relationships between processing temperature and surface composition. This work provides design rules for multifunctional current collectors and demonstrates scalable VPD production for next-generation batteries.

cond-mat.mtrl-sci↗

arXiv2025

Atom probe tomography of hydrated biomacromolecules: preliminary results

The folding and structure of biomacromolecules depend on the 3D distributions of their constituents, which ultimately controls their functionalities and interactions with other biomacromolecules. Atom probe tomography (APT) with its unparalleled compositional sensitivity at nanoscale spatial resolution, could provide complementary information to cryo-electron microscopy, yet routine APT analysis of biomacromolecules in their native state remains challenging. Here, a ferritin solution was used as a model system. Following plunge freezing in liquid nitrogen, cryogenic lift-out and cryo-APT analysis were performed. Elements from the ferritin core and shell are detected yet particles seem destroyed. We hence demonstrate the feasibility of preparing and analyzing bulk hydrated biological samples using APT, however, the cooling was too slow to vitrify the solution. This caused irrecoverable damage to the protein shell surrounding the ferritin particles due to ice crystal formation. We report on preliminary data from high-pressure frozen (HPF) deionized (DI) water, demonstrating a proof-ofprinciple experiments that intact biomacromolecules could be analyzed through a similar workflow in the future. We report on many trials (and errors) on the use of different materials for substrates and different substrate geometries, and provide a perspective on the challenges we faced to facilitate future studies across the community.

physics.bio-ph↗

arXiv2025

Degradation and SEI Evolution in Alloy Anodes Revealed by Correlative Liquid-Cell Electrochemistry and Cryogenic Microscopy

Understanding solid liquid interfaces at high spatial and chemical resolution is crucial for advancing electrochemical energy storage technologies, yet this remains a persistent challenge due to the lack of characterisation techniques that can capture dynamic processes and preserve fragile interfacial chemistries. In lithium ion batteries, interfacial phenomena such as lithium alloying, solid electrolyte interphase formation, and electrode degradation play a decisive role in capacity retention and failure mechanisms but are difficult to observe in their native state due to high mobility, reactivity, and low atomic number of lithium. Here, we use a recently introduced correlative operando characterisation approach that integrates electrochemical liquid cell transmission electron microscopy with cryogenic atom probe tomography to resolve the evolution of a platinum alloy anode at the solid liquid interface during electrochemical cycling. This correlative, cryo enabled workflow reveals spatially heterogeneous SEI formation, the presence of lithium carbonate rich inner SEI layers, and the retention of elemental lithium within the platinum electrode, most likely trapped along grain boundaries. Additionally, we observe the formation of mossy lithium structures and irreversible lithium loss through dead lithium accumulation. Our results provide direct mechanistic insight into lithium alloying and degradation pathways in alloy based anodes and establish a generalised platform for probing dynamic electrochemical interfaces with complementary structural and chemical sensitivity. The methodology is broadly applicable to next generation electrode materials and electrochemical devices where interfacial dynamics dictate performance and stability.

cond-mat.mtrl-sci↗

arXiv2025

Kinetically controlling surface atom arrangements in thermally robust, amorphous high-entropy alloy nanoparticles by solvent selection

The ability to tailor nanoscale surface atom arrangements through multi-elemental compositional control provides high-entropy nanoalloys with promising functional properties. Developing a fundamental understanding of nanoalloy formation mechanisms during synthesis is therefore essential for effectively engineering the surface composition and resulting functional properties. Using the Cantor alloy (CrMnFeCoNi) as a model system, we investigate how solvent selection during reactive, nanosecond-pulsed laser synthesis influences carbon doping and the resulting changes in nanoparticle morphology, structure, and composition. Supersaturated carbon incorporation, partitioned from the organic solvent molecules, produces amorphous nanoparticles with distinctive carbon shells, thermally stable up to 350 °C. We propose kinetically controlled particle formation mechanisms and rationalize the criticality of the time scales between the competing reactions of carbon doping, carbon shell formation, and coalescence of metallic fragments, ruling compositional and morphological characteristics. This work demonstrates effective solvent-driven surface-compositional control in amorphous high-entropy nanoalloys. It introduces a novel synthesis approach for tailoring surface atom arrangements through carbon incorporation via reactive, pulsed laser synthesis.

cond-mat.mtrl-sci↗

arXiv2025

A Workflow for Correlative in-situ Nano-chip Liquid Cell Transmission Electron Microscopy and Atom Probe Tomography Enabled by Cryogenic Plasma Focused Ion Beam

Operando/in-situ liquid cell transmission electron microscopy (LCTEM) allows for real time imaging of dynamic nanoscale liquid-based processes. However, due to the thick liquid cell of traditional LCTEM holders and thus scattering of the electron beam passing through the cell, the achievable spatial and chemical resolution is limited. Cryogenic atom probe tomography (cryo-APT) overcomes these limitations by offering (near-)atomic scale compositional analysis of frozen liquid-solid interfaces. However, APT provides limited structural analysis and has no capacity for dynamic or operando liquid cell studies. This work presents a novel workflow for site-specific cryo-APT sample preparation of liquid-solid interfaces from in-situ electrochemical LCTEM Micro-Electro-Mechanical Systems (MEMS) chips. Using cryogenic inert gas transfer suitcase and a cryogenic plasma-focused ion beam (PFIB), a MEMs nanochip containing a Li electrolyte from an electrochemistry LCTEM holder was successfully frozen, transferred to the cryo stage of a PFIB and prepared into APT needle samples containing the electrolyte-electrode interface at cryogenic temperatures, followed by cryogenic transfer to an atom probe for nanoscale compositional analysis. This correlative approach provides dynamic nanoscale imaging and near atomic scale compositional analysis of liquid-solid interfaces. This method enables reliable and reproducible APT sample preparation of these frozen interfaces from MEMs based nanochips and can hence be used across materials systems and energy-conversion or storage devices.

cond-mat.mtrl-sci↗

arXiv2025

Machine learning enhanced atom probe tomography analysis: a snapshot review

Atom probe tomography (APT) is a burgeoning characterization technique that provides compositional mapping of materials in three-dimensions at near-atomic scale. Since its significant expansion in the past 30 years, we estimate that one million APT datasets have been collected, each containing millions to billions of individual ions. Their analysis and the extraction of microstructural information has largely relied upon individual users whose varied level of expertise causes clear and documented bias. Current practices hinder efficient data processing, and make challenging standardization and the deployment of data analysis workflows that would be compliant with FAIR data principles. Over the past decade, building upon the long-standing expertise of the APT community in the development of advanced data processing or data mining techniques, there has been a surge of novel machine learning (ML) approaches aiming for user-independence, and that are efficient, reproducible, and robust from a statistics perspective. Here, we provide a snapshot review of this rapidly evolving field. We begin with a brief introduction to APT and the nature of the APT data. This is followed by an overview of relevant ML algorithms and a comprehensive review of their applications to APT. We also discuss how ML can enable discoveries beyond human capability, offering new insights into the mechanisms within materials. Finally, we provide guidance for future directions in this domain.

cond-mat.mtrl-sci↗

arXiv2025

Unraveling the thermodynamics and mechanism behind the lowering of reduction temperatures in oxide mixtures

Hydrogen-based direct reduction offers a sustainable pathway to decarbonize the metal production industry. However, stable metal oxides, like Cr$_2$O$_3$, are notoriously difficult to reduce, requiring extremely high temperatures (above 1300 $^\circ$C). Herein, we show how reducing mixed oxides can be leveraged to lower hydrogen-based reduction temperatures of stable oxides and produce alloys in a single process. Using a newly developed thermodynamic framework, we predict the precise conditions (oxygen partial pressure, temperature, and oxide composition) needed for co-reduction. We showcase this approach by reducing Cr$_2$O$_3$ mixed with Fe$_2$O$_3$ at 1100 $^\circ$C, significantly lowering reduction temperatures (by $\geq$200 $^\circ$C). Our model and post-reduction atom probe tomography analysis elucidate that the temperature-lowering effect is driven by the lower chemical activity of Cr in the metallic phase. This strategy achieves low-temperature co-reduction of mixed oxides, dramatically reducing energy consumption and CO$_2$ emissions, while unlocking transformative pathways toward sustainable alloy design.

cond-mat.mtrl-sci↗

arXiv2025

Temperature and misorientation-dependent austenite nucleation at ferrite grain boundaries in a medium manganese steel: role of misorientation-dependent grain boundary segregation

In the current work, we study the role of grain boundary (GB) misorientation-dependent segregation on austenite nucleation in a 50% cold rolled intercritically annealed 10Mn-0.05C-1.5Al (wt. %) medium Mn steel. During intercritical annealing at 500°C, austenite nucleates predominantly at high-angle GBs. At 600°C, austenite nucleates additionally at low-angle GBs, exhibiting a temperature dependance. Correlative transmission Kikuchi diffraction /atom probe tomography reveals a misorientation-dependent segregation. While GB segregation has been reported to assist austenite nucleation in medium manganese steels (3-12 wt.% Mn), an understanding of the temperature and misorientation dependance is lacking, which is the aim of current work. Since artifacts of atom probe can cause a broadening of the segregation width, we combined experiments with results from density functional theory (DFT) calculations that reveal that the Mn segregation is not limited to the GB plane but confined to a region in the range of approximately 1 nm. Consequently, GB segregation alters both the GB interface energy and the free energy per unit volume corresponding to the transformation. We estimate the local driving force for austenite nucleation accounting for the segregation width of ~ 1 nm. Based on classical nucleation theory, we clarify the effect of GB segregation on the critical radius and activation energy barrier for confined austenite nucleation at the GB.

cond-mat.mtrl-sci↗

arXiv2025

Advancing atom probe tomography capabilities to understand bone microstructures at the near-atomic scale

Bone structure is generally hierarchically organized into organic (collagen, proteins,...), inorganic (hydroxyapatite (HAP)) components. However, many fundamental mechanisms of the biomineralization processes such as HAP formation, the influence of trace elements, the mineral-collagen arrangement, etc., are not clearly understood. This is partly due to the analytical challenge of simultaneously characterizing the three-dimensional (3D) structure and chemical composition of biominerals in general at the nanometer scale, which can, in principle be achieved by atom probe tomography (APT). Yet, the hierarchical structures of bone represent a critical hurdle for APT analysis in terms of sample yield and analytical resolution, particularly for trace elements, and organic components from the collagen appear to systematically get lost from the analysis. Here, we applied in-situ metallic coating of APT specimens within the focused ion beam (FIB) used for preparing specimens, and demonstrate that the sample yield and chemical sensitivity are tremendously improved, allowing the analysis of individual collagen fibrils and trace elements such as Mg and Na. We explored a range of measurement parameters with and without coating, in terms of analytical resolution performance and determined the best practice parameters for analyzing bone samples in APT. To decipher the complex mass spectra of the bone specimens, reference spectra from pure HAP and collagen were acquired to unambiguously identify the signals, allowing us to analyze entire collagen fibrils and interfaces at the near-atomic scale. Our results open new possibilities for understanding the hierarchical structure and chemical heterogeneity of bone structures at the near-atomic level and demonstrate the potential of this new method to provide new, unexplored insights into biomineralization processes in the future.

cond-mat.mtrl-sci↗

arXiv2025

Kinetics and direct imaging of electrochemically formed palladium hydride for efficient hydrogen evolution reaction

Active and reliable electrocatalysts are fundamental to renewable energy technologies. PdCoO2 has recently been recognized as a promising catalyst template for the hydrogen evolution reaction (HER) in acidic media thanks to the formation of active PdHx. In this article, we monitor the transformation of single PdCoO2 particles during HER, and confirm their almost complete transformation to PdHx with sub-millimeter depths and cracks throughout the particles. Using operando mass spectrometry, Co dissolution is observed under reductive potentials, leading to PdHx formation, whereas the dissolution partial current is found to be 0.1 % of the HER current. The formation of PdHx is confirmed through secondary ion mass spectrometry and quantitatively analyzed by atom probe tomography, enabled by isotope labelling of hydrogen using heavy water. Despite dry storage and high vacuum during sample preparations, an overall composition of PdD0.28 is measured for the PdHx sample, with separation between alpha- (D-poor) and beta- (D-rich) PdHx phases. The PdHx phase formed on PdCoO2 particles is stable for a wide electrochemical potential window, until Pd dissolution is observed at open circuit potentials. Our findings highlight the critical role of a templated growth method in obtaining stabilized PdHx, enabling efficient HER without the commonly slow activation processes observed in Pd. This offers insights into the design of more efficient electrocatalysts for renewable energy technologies.

physics.chem-ph↗

arXiv2025

Atomic-Scale Investigation of an Asymmetric SrTiO$_{3}$ Grain Boundary

Grain boundaries (GBs) in oxide perovskites significantly influence their functional properties. This study examines the atomic-scale structure and composition of a faceted asymmetric grain boundary in strontium titanate (SrTiO$_3$) using scanning transmission electron microscopy (STEM), atom probe tomography (APT), and density functional theory (DFT). STEM and APT reveal an atomically sharp boundary with asymmetric and symmetric facets, marked by strong Sr depletion over a width of less than 1 nm. STEM-EELS shows Ti concentration variations of up to 20% between facets, while APT constrains this variation to less than 10%. DFT$+U$ calculations of a symmetric $Σ$5 facet confirm that Sr depletion minimizes boundary energy while maintaining Ti content. The variation in Ti suggests cation mobility that enables local energy minimization. Differences in facet surface energies likely drive Ti redistribution, offering strategies for GB structure control. This combined experimental-theoretical approach provides key insights into the structure and energy landscape of GBs in SrTiO$_3$, aiding in the prediction of their impact on ionic and electronic transport.

cond-mat.mtrl-sci↗

arXiv2025

Effect of Ag nano-additivation on microstructure formation in Nd-Fe-B magnets built by laser powder bed fusion

Laser powder bed fusion (PBF-LB/M) enables the near-net shape production of permanent magnets with complex geometry while reducing material waste. However, controlling the microstructure and optimizing magnetic properties remain challenging due to rapid solidification and intrinsic heat treatment effects occurring during both inter-layer and intra-layer processing. Surface additivation of the feedstock powder with Ag nanoparticles (NPs) is a concept that has been shown to increase the coercivity of PBF-LB/M-produced Nd-Fe-B magnets. Using atom probe tomography (APT) and transmission electron microscopy (TEM), we reveal that Ag nano-additivation promotes heterogeneous nucleation of the Nd2Fe14B phase, leading to refined, equiaxed grains and increased stability of the Ti-Zr-B-rich intergranular phase. The intrinsic heat treatment, influenced by layer-wise processing, further affects the distribution of Ag-rich regions, impacting grain growth and intergranular phase composition across different regions of the melt pool. Compared to the unadditivated sample, the Ag-additivated sample exhibits a significantly finer grain structure and a changed intergranular phase, which contribute to enhanced domain wall pinning and coercivity. These microstructural changes directly modify the magnetic domain structure, as evidenced by Lorentz transmission electron microscopy (TEM). Our results highlight that the interplay between nano-additivation and in-process heat treatment provides a novel pathway for tailoring the microstructure and enhancing the magnetic performance of permanent magnets.

cond-mat.mtrl-sci↗

arXiv2025

Electric Field-Induced Formation of a 2D Adatom Gas on Cryogenic Li Surfaces

Intense electrostatic fields, such as those able to break bonds and cause field-ion emission, can fundamentally alter the behaviour of atoms at and on the surface. Using density functional theory (DFT) calculations on the Li (110) surface under high electrostatic fields, we identify a critical field strength at which surface atoms occupying a kink site become thermodynamically unstable against adatom formation. This mechanism leads to the formation of a highly concentrated two-dimensional (2D) adatom gas on the surface. Moreover, the applied field reverses the stability of preferred adsorption sites, enabling barrierless diffusion of lithium atoms even well below the threshold required for field evaporation. The here identified mechanisms offer a unified explanation for experimental observations in atom probe tomography and for understanding high electric field phenomena in systems such as battery interfaces and electrochemical environments.

cond-mat.mtrl-sci↗

arXiv2024

Understanding High Coercivity in ThMn12-Type Sm-Zr-Fe-Co-Ti Permanent Magnet Powders through Nanoscale Analysis

ThMn12-type (Sm,Zr)1(Fe,Co,Ti)12 compounds show great potential for permanent magnets. Magnetically hard anisotropic powders prepared via reduction-diffusion exhibit a significant increase in coercivity from 0.45 T to 1.26 T as the processing temperature is raised from 990°C to 1220°C. Structural and microchemical analyses at high-resolution reveal that high-temperature processing annihilates grain boundaries (GBs) and reduces the density of twin boundaries (TBs), which are defects acting as weak links limiting the coercivity in the 1:12 system. Ostwald ripening is proposed as the mechanism behind the reduction of GB and TB densities at higher temperature, driven by the reduction in interfacial energy and enhancing atomic structural uniformity.

cond-mat.mtrl-sci↗

arXiv2024

Formation of cellular/lamellar nanostructure in Sm$_2$Co$_{17}$-type binary and ternary Sm-Co-Zr magnets

2:17 SmCo magnets with a quinary composition of Sm(Co,Cu,Fe,Zr)$_{7+δ}$ are industrially relevant hard magnets used in high temperature and corrosive environments. Their complex cellular/lamellar nanostructure, consisting of ordered 2:17 phase cells, 1:5 phase cell boundaries and Z-phase (Zr-rich) lamellae, is essential for their high coercivity. However, the system's complexity makes it challenging to determine the contribution of each element or microstructural feature to coercivity. To disentangle the microstructure-property relationships, we simplified the system to binary and ternary SmCo$_{7.7-x}$Zr$_x$ (with $x = 0$ and 0.1) magnets and conducted detailed micro- to atomic-scale analyses. Only Zr-containing magnets formed a cellular/lamellar nanostructure akin to industrial magnets, in Zr-rich regions with at least 1 at.% Zr, but without achieving high coercivity due to low elemental gradients in absence of Cu across cell boundaries. Data from Zr-poor areas of SmCo$_{7.6}$Zr$_{0.1}$ suggests that 2:17 phase twin boundaries facilitate cellular nanostructure formation by providing inhomogeneities for heterogeneous nucleation.

cond-mat.mtrl-sci↗