arXiv subjects

Baptiste Jadot

Publications and source records attributed to Baptiste Jadot.

17 recordsLinked to original sources

arXiv2026

Multiplexed cryo-CMOS control of an isolated double quantum dot

Scalable spin-based quantum computing demands precise and stable control of a large number of gate-defined quantum dots while minimizing wiring complexity and thermal load. Control architectures based on sample-and-hold (SH) multiplexing techniques offer a promising solution by enabling sequential programming of several gate voltages using a limited number of input lines. However, the compatibility of such dynamic voltage refreshing with the stringent stability, noise, and speed requirements of quantum dot operation is an active subject of study. Here we experimentally demonstrate that a multiplexing cryo-CMOS circuit can reliably bias a silicon double quantum dot (DQD) at 0.5K. Exploiting the isolated regime, we show deterministic loading and isolation of four electrons and stable access to all five charge configurations from (4,0) to (0,4), despite the sequential voltage refreshing. We further demonstrate rapid voltage pulsing across an inter-dot transition, resolving single-electron tunneling events and stochastic switching at the (1,3)-(0,4) transition. These results confirm that SH-based multiplexed control is compatible with both static biasing and pulsing of isolated quantum dots, representing an important milestone toward scalable cryogenic control architectures for large-scale spin-qubit processors.

cond-mat.mes-hall↗

arXiv2025

Electron qubits surfing on acoustic waves: review of recent progress

The displacement of a single electron enables exciting avenues for nanotechnology with vast application potential in quantum metrology, quantum communication and quantum computation. Surface acoustic waves (SAW) have proven itself as a surprisingly useful solution to perform this task over large distance with outstanding precision and reliability. Over the last decade, important milestones have been achieved bringing SAW-driven single-electron transport from first proof-of-principle demonstrations to accurate, highly-controlled implementations, such as coherent spin transport, charge-to-photon conversion, or antibunching of charge states. Beyond the well-established piezoelectric gallium-arsenide platform, first realisations of acousto-electronic transport have also been carried out on the surface of liquid helium that promises unique stability and coherence. In this review article, we aim to keep track of this remarkable progress in SAW-driven transport of electron qubits by explaining these recent achievements from basic principles, with an outlook on follow-up experiments and near-term applications.

cond-mat.mes-hall↗

arXiv2024

Compact frequency multiplexed readout of silicon quantum dots in monolithic FDSOI 28nm technology

This paper demonstrates the first on-chip frequency multiplexed readout of two co-integrated single-electron transistors without the need for bulky resonators. We characterize single electron dynamics in both single electron transistors at 4.2K before validating their simultaneous readout within 2.2μs, achieving a 99.9% fidelity with a 1MHz frequency spacing. This experimental demonstration paves the way towards resonator-free large-scale quantum-classical architectures that would be required for future universal and reprogrammable quantum computers.

cond-mat.mes-hall↗

arXiv2023

Electrical manipulation of a single electron spin in CMOS with micromagnet and spin-valley coupling

For semiconductor spin qubits, complementary-metal-oxide-semiconductor (CMOS) technology is the ideal candidate for reliable and scalable fabrication. Making the direct leap from academic fabrication to qubits fabricated fully by industrial CMOS standards is difficult without intermediate solutions. With a flexible back-end-of-line (BEOL) new functionalities such as micromagnets or superconducting circuits can be added in a post-CMOS process to study the physics of these devices or achieve proof of concepts. Once the process is established it can be incorporated in the foundry-compatible process flow. Here, we study a single electron spin qubit in a CMOS device with a micromagnet integrated in the flexible BEOL. We exploit the synthetic spin orbit coupling (SOC) to control the qubit via electric field and we investigate the spin-valley physics in the presence of SOC where we show an enhancement of the Rabi frequency at the spin-valley hotspot. Finally, we probe the high frequency noise in the system using dynamical decoupling pulse sequences and demonstrate that charge noise dominates the qubit decoherence in this range.

cond-mat.mes-hall↗

arXiv2022

Superconducting routing platform for large-scale integration of quantum technologies

To reach large-scale quantum computing, three-dimensional integration of scalable qubit arrays and their control electronics in multi-chip assemblies is promising. Within these assemblies, the use of superconducting interconnections, as routing layers, offers interesting perspective in terms of (1) thermal management to protect the qubits from control electronics self-heating, (2) passive device performance with significant increase of quality factors and (3) density rise of low and high frequency signals thanks to minimal dispersion. We report on the fabrication, using 200 mm silicon wafer technologies, of a multi-layer routing platform designed for the hybridization of spin qubit and control electronics chips. A routing level couples the qubits and the control circuits through one layer of Al0.995Cu0.005 and superconducting layers of TiN, Nb or NbN, connected between them by W-based vias. Wafer-level parametric tests at 300 K validate the yield of these technologies and low temperature electrical measurements in cryostat are used to extract the superconducting properties of the routing layers. Preliminary low temperature radio-frequency characterizations of superconducting passive elements, embedded in these routing levels, are presented.

cond-mat.mes-hall↗

arXiv2022

Probing charge noise in few electron CMOS quantum dots

Charge noise is one of the main sources of environmental decoherence for spin qubits in silicon, presenting a major obstacle in the path towards highly scalable and reproducible qubit fabrication. Here we demonstrate in-depth characterization of the charge noise environment experienced by a quantum dot in a CMOS-fabricated silicon nanowire. We probe the charge noise for different quantum dot configurations, finding that it is possible to tune the charge noise over two orders of magnitude, ranging from 1 ueV^2 to 100 ueV^2. In particular, we show that the top interface and the reservoirs are the main sources of charge noise and their effect can be mitigated by controlling the quantum dot extension. Additionally, we demonstrate a novel method for the measurement of the charge noise experienced by a quantum dot in the few electron regime. We measure a comparatively higher charge noise value of 40 ueV^2 at the first electron, and demonstrate that the charge noise is highly dependent on the electron occupancy of the quantum dot.

cond-mat.mes-hall↗

arXiv2022

Complete readout of two-electron spin states in a double quantum dot

We propose and demonstrate complete spin state readout of a two-electron system in a double quantum dot probed by an electrometer. The protocol is based on repetitive single shot measurements using Pauli spin blockade and our ability to tune on fast timescales the detuning and the interdot tunnel coupling between the GHz and sub-Hz regime. A sequence of three distinct manipulations and measurements allows establishing if the spins are in S, Tzero, Tplus or Tminus state. This work points at a procedure to reduce the overhead for spin readout, an important challenge for scaling up spin qubit platforms.

cond-mat.mes-hall↗

arXiv2022

Generation of a single-cycle acoustic pulse: a scalable solution for transport in single-electron circuits

The synthesis of single-cycle, compressed optical and microwave pulses sparked novel areas of fundamental research. In the field of acoustics, however, such a generation has not been introduced yet. For numerous applications, the large spatial extent of surface acoustic waves (SAW) causes unwanted perturbations and limits the accuracy of physical manipulations. Particularly, this restriction applies to SAW-driven quantum experiments with single flying electrons, where extra modulation renders the exact position of the transported electron ambiguous and leads to undesired spin mixing. Here, we address this challenge by demonstrating single-shot chirp synthesis of a strongly compressed acoustic pulse. Employing this solitary SAW pulse to transport a single electron between distant quantum dots with an efficiency exceeding 99%, we show that chirp synthesis is competitive with regular transduction approaches. Performing a time-resolved investigation of the SAW-driven sending process, we outline the potential of the chirped SAW pulse to synchronize single-electron transport from many quantum-dot sources. By superimposing multiple pulses, we further point out the capability of chirp synthesis to generate arbitrary acoustic waveforms tailorable to a variety of (opto)nanomechanical applications. Our results shift the paradigm of compressed pulses to the field of acoustic phonons and pave the way for a SAW-driven platform of single-electron transport that is precise, synchronized, and scalable.

cond-mat.mes-hall↗

arXiv2022

Parity and singlet-triplet high fidelity readout in a silicon double quantum dot at 0.5 K

We demonstrate singlet-triplet readout and parity readout allowing to distinguish T0 and the polarized triplet states. We achieve high fidelity spin readout with an average fidelity above $99.9\%$ for a readout time of $20~μ$s and $99\%$ for $4~μ$s at a temperature of $0.5~K$. We initialize a singlet state in a single dot with a fidelity higher than $99\%$ and separate the two electrons while keeping the same spin state with $a \approx 95.6\%$ fidelity.

cond-mat.mes-hall↗

arXiv2022

Controlled quantum dot array segmentation via a highly tunable interdot tunnel coupling

Recent demonstrations using electron spins stored in quantum dots array as qubits are promising for developing a scalable quantum computing platform. An ongoing effort is therefore aiming at the precise control of the quantum dots parameters in larger and larger arrays which represents a complex challenge. Partitioning of the system with the help of the inter-dot tunnel barriers can lead to a simplification for tuning and offers a protection against unwanted charge displacement. In a triple quantum dot system, we demonstrate a nanosecond control of the inter-dot tunnel rate permitting to reach the two extreme regimes, large GHz tunnel coupling and sub-Hz isolation between adjacent dots. We use this novel development to isolate a sub part of the array while performing charge displacement and readout in the rest of the system. The degree of control over the tunnel coupling achieved in a unit cell should motivate future protocol development for tuning, manipulation and readout including this capability.

cond-mat.mes-hall↗

arXiv2021

Spin-valley coupling anisotropy and noise in CMOS quantum dots

One of the main advantages of silicon spin qubits over other solid-state qubits is their inherent scalability and compatibility with the 300 mm CMOS fabrication technology that is already widely used in the semiconductor industry, whilst maintaining high readout and gate fidelities. We demonstrate detection of a single electron spin using energy-selective readout in a CMOS-fabricated nanowire device with an integrated charge detector. We measure a valley splitting of 0.3 meV and 0.16 meV in two similar devices. The anisotropy of the spin-valley mixing is measured and shown to follow the dependence expected from the symmetry of the local confinement, indicating low disorder in the region of the quantum dot. Finally the charge noise in the spin-valley coupling regime is investigated and found to induce fluctuations in the qubit energy in the range of $0.6GHz/\sqrt{Hz}$.

cond-mat.mes-hall↗

arXiv2021

In-flight distribution of an electron within a surface acoustic wave

Surface acoustic waves (SAW) have large potential to realize quantum-optics-like experiments with single flying electrons employing their spin or charge degree of freedom. For such quantum applications, highly efficient trapping of the electron in a specific moving quantum dot (QD) of a SAW train plays a key role. Probabilistic transport over multiple moving minima would cause uncertainty in synchronisation that is detrimental for coherence of entangled flying electrons and in-flight quantum operations. It is thus of central importance to identify the device parameters enabling electron transport within a single SAW minimum. A detailed experimental investigation of this aspect is so far missing. Here we fill this gap by demonstrating time-of-flight measurements for a single electron that is transported via a SAW train between distant stationary QDs. Our measurements reveal the in-flight distribution of the electron within the moving acousto-electric quantum dots of the SAW train. Increasing the acousto-electric amplitude, we observe the threshold necessary to confine the flying electron at a specific, deliberately chosen SAW minimum. Investigating the effect of a barrier along the transport channel, we also benchmark the robustness of SAW-driven electron transport against stationary potential variations. Our results pave the way for highly controlled transport of electron qubits in a SAW-driven platform for quantum experiments.

cond-mat.mes-hall↗

arXiv2021

Enhanced spin coherence while displacing electron in a 2D array of quantum dots

The ability to shuttle coherently individual electron spins in arrays of quantum dots is a key procedure for the development of scalable quantum information platforms. It allows the use of sparsely populated electron spin arrays, envisioned to efficiently tackle the one- and two-qubit gate challenges. When the electrons are displaced in an array, they are submitted to site-dependent environment interactions such as hyperfine coupling with substrate nuclear spins. Here, we demonstrate that the electron multi-directional displacement in a $3\times 3$ array of tunnel coupled quantum dots enhances the spin coherence time via the motional narrowing phenomenon. More specifically, up to 10 configurations are explored by the electrons to study the impact of the displacement on spin dynamics. An increase of the coherence time by a factor up to 10 is observed in case of fast and repetitive displacement. The physical mechanism responsible for the loss of coherence induced by displacement is quantitatively captured by a simple model and its implications on spin coherence properties during the electron displacement are discussed in the context of large-scale quantum circuits.

cond-mat.mes-hall↗

arXiv2020

Distant spin entanglement via fast and coherent electron shuttling

In the quest for large-scale quantum computing, networked quantum computers offer a natural path towards scalability. Now that nearest neighbor entanglement has been demonstrated for electron spin qubits in semiconductors, on-chip long distance entanglement brings versatility to connect quantum core units. Here we realize the controlled and coherent transfer of a pair of entangled electron spins, and demonstrate their remote entanglement when separated by a distance of 6 microns. Driven by coherent spin rotations induced by the electron displacement, high-contrast spin quantum interferences are observed and are a signature of the preservation of the entanglement all along the displacement procedure. This work opens the route towards fast on-chip deterministic interconnection of remote quantum bits in semiconductor quantum circuits.

cond-mat.mes-hall↗

arXiv2020

Charge detection in an array of CMOS quantum dots

The recent development of arrays of quantum dots in semiconductor nanostructures highlights the progress of quantum devices toward large scale. However, how to realize such arrays on a scalable platform such as silicon is still an open question. One of the main challenge resides in the detection of charges within the array. It is a prerequisite functionality to initialize a desired charge state and readout spins through spin-to-charge conversion mechanisms. In this paper, we use two methods based on either a single-lead charge detector, or a reprogrammable single electron transistor. Thanks to these methods, we study the charge dynamics and sensitivity by performing single shot detection of the charge. Finally, we can probe the charge stability at any node of a linear array and assess the Coulomb disorder in the structure. We find an electrochemical potential fluctuation induced by charge noise comparable to that reported in other silicon quantum dots.

cond-mat.mes-hall↗

arXiv2018

Gate-Based High Fidelity Spin Read-out in a CMOS Device

The engineering of electron spin qubits in a compact unit cell embedding all quantum functionalities is mandatory for large scale integration. In particular, the development of a high-fidelity and scalable spin readout method remains an open challenge. Here we demonstrate high-fidelity and robust spin readout based on gate reflectometry in a CMOS device comprising one qubit dot and one ancillary dot coupled to an electron reservoir to perform readout. This scalable method allows us to read out a spin with a fidelity above 99% for 1 ms integration time. To achieve such fidelity, we exploit a latched spin blockade mechanism that requires electron exchange between the ancillary dot and the reservoir. We show that the demonstrated high read-out fidelity is fully preserved up to 0.5 K. This results holds particular relevance for the future co-integration of spin qubits and classical control electronics.

cond-mat.mes-hall↗

arXiv2018

Coherent control of individual electron spins in a two dimensional array of quantum dots

The ability to manipulate coherently individual quantum objects organized in arrays is a prerequisite to any scalable quantum information platform. For electron spin qubits, it requires the fine tuning of large arrays of tunnel-coupled quantum dots. The cumulated efforts in linear dot arrays have permitted the recent realization of quantum simulators and multi-electron spin coherent manipulation. However, the two-dimensional scaling of such implementations remains undemonstrated while being compulsory to resolve complex quantum matter problems or process quantum information. Here, we demonstrate the two-dimensional coherent control of individual electron spins in a 3x3 array of tunnel-coupled quantum dots. More specifically, we focus on several key quantum functionalities of such control: charge deterministic displacement, local spin readout, local coherent exchange manipulation between two electron spins trapped in adjacent dots, and coherent multi-directional spin shuttling over distances of several microns. This work lays the foundations for exploiting a two-dimensional array of electron spins for quantum simulation and information processing.

cond-mat.mes-hall↗