arXiv subjects

Barbara Previtali

Publications and source records attributed to Barbara Previtali.

5 recordsLinked to original sources

arXiv2021

Time-resolved quantification of plasma accumulation induced by multi-pulse laser ablation using self-mixing interferometry

In this work a method based on self-mixing interferometry (SMI) is presented for probing the concentration of plasma plumes induced by multi-pulse laser ablation. An analytical model is developed to interpret the single-arm interferometric signal in terms of plasma electron number density. Its time dependence follows a power-law scaling which is determined by concurrent effects of plume accumulation and propagation. The model has been applied for the experimental study of plume formation at variable laser pulse frequencies on different materials. The plume expansion dynamics has been observed with high-speed imaging, and the SMI measurements allowed for a time-resolved estimation of the electron number density. The intrinsic advantages of the SMI technique in terms of robustness and low intrusiveness would allow for its usage as a fast diagnostic tool for the dynamical scaling of laser-induced plumes. Moreover it can be easily applied in laser-based manufacturing technologies where plasma concentration monitoring and control is important.

physics.plasm-ph↗

arXiv2021

Interplay between powder catchment efficiency and layer height in self-stabilized laser metal deposition

In laser metal deposition (LMD) the height of the deposited track can vary within and between layers, causing significant deviations during the process evolution. Previous works have shown that in certain conditions a self-stabilizing mechanism occurs, maintaining a regular height growth and a constant standoff distance between the part and the deposition nozzle. Here we analyze the link between the powder catchment efficiency and the deposition height stability. To this purpose, a monitoring system was developed to study the deposition in different process conditions, using inline measurements of the specimen weight in combination with the layer height information obtained with coaxial optical triangulation. An analytical model was used to estimate the deposition efficiency in real-time from the height monitoring and the process parameters, which was verified by the direct mass measurements. The results show that the track height stabilization is associated to a reduction of the powder catchment efficiency, which is governed by the melt pool relative position with respect to the powder cone and the laser beam. For a given set of parameters, the standoff distance can be estimated to achieve the highest powder catchment efficiency and a regular height through the build direction.

physics.app-ph↗

arXiv2019

Plasticity and damage mechanisms in Ti-6Al-4V printed with selective laser melting

The ability to create complex geometries with tailored material properties has brought interest in using additive manufacturing (AM) techniques in various industrial applications. However, the complex relationship between AM process parameters, microstructure, and resultant properties of metals needs to be fully understood for the widespread use of metal AM. In this study, selective laser melting is used to print Ti-6Al-4V. In-situ tensile tests with concurrent detailed microstructural analysis using electron backscatter diffraction, electron channeling contrast imaging, and digital image correlation are performed to understand the damage mechanism and its relation to the microstructure. Our results show that the as-printed part develops a hierarchical microstructures, consisting of primary, secondary, and tertiary α^' martensite. This hierarchical structure is formed as a result of cyclic heat treatment during the course of selective laser melting. Upon deformation, strain localization within primary α^' martensite results in microscopic ductile micro-void formation and coalescence, as well as macroscopic brittle fracture. In addition to localization inside primary α^', surface steps at the boundaries of these high aspect ratio grains are formed which reveal the contribution of interfacial plasticity to the overall deformation of the material.

physics.app-ph↗

arXiv2018

Probing multipulse laser ablation by means of self-mixing interferometry

In this work, self-mixing interferometry (SMI) is implemented inline to a laser microdrilling system to monitor the machining process by probing the ablation-induced plume. An analytical model based on the Sedov-Taylor blast wave equation is developed for the expansion of the process plume under multiple-pulse laser percussion drilling conditions. Signals were acquired during laser microdrilling of blind holes on stainless steel, copper alloy, pure titanium, and titanium nitride ceramic coating. The maximum optical path difference was measured from the signals to estimate the refractive index changes. An amplitude coefficient was derived by fitting the analytical model to the measured optical path differences. The morphology of the drilled holes was investigated in terms of maximum hole depth and dross height. The results indicate that the SMI signal rises when the ablation process is dominated by vaporization, changing the refractive index of the processing zone significantly. Such ablation conditions correspond to limited formation of dross. The results imply that SMI can be used as a nonintrusive tool in laser micromachining applications for monitoring the process quality in an indirect way.

physics.app-ph↗

arXiv2018

Monitoring of laser metal deposition height by means of coaxial laser triangulation

Laser metal deposition (LMD) is an additive manufacturing technique, whose performances can be influenced by several factors and parameters. Monitoring their evolution allows for a better comprehension and control of the process, hence enhancing the deposition quality. In particular, the deposition height is an important variable that, if it does not match the process growth, can bring to defects and geometrical inaccuracies in the deposited structures. The current work presents a system based on optical triangulation for the height monitoring, implemented on a LMD setup composed of a fiber laser, a deposition head, and an anthropomorphic robot. Its coaxial and non-intrusive configuration allows for flexibility in the deposition strategy and direction. A measurement laser beam is launched through the powder nozzle and hits the melt pool. A coaxial camera acquires the probe spot, whose position is converted to relative height. The device has been demonstrated for monitoring the deposition of a stainless steel cylinder. The measurements allowed to reconstruct a spatial map of the height variation, highlighting a transient in the deposition growth which can be explained in terms of a self-regulating mechanism for the layer thickness.

physics.ins-det↗