arXiv subjects

Bart Partoens

Publications and source records attributed to Bart Partoens.

At least 19 recordsLinked to original sources

arXiv2025

Gate-Tunable Resonances and 1D Channel in a Graphene Nanoslide

We present a theory of the graphene nanoslide, a fundamental device for graphene straintronics that realizes a single pseudogauge barrier. We solve the scattering problem in closed form and demonstrate that the nanoslide gives rise to a hybrid pseudogauge and electrostatic cavity in the bipolar regime, and hosts one-dimensional transverse channels. The latter can be tuned using a bottom gate between valley-chiral or counterpropagating modes, as well as one-dimensional flatbands. Hence, the local density of states near the barrier depends strongly on the gate voltage with a tunable sublattice and electron-hole asymmetry. In the presence of electron-electron interactions, the nanoslide allows for \textit{in-situ} tuning between a chiral and ordinary Tomonaga-Luttinger liquid.

cond-mat.mes-hall↗

arXiv2025

An accurate DFT-1/2 approach for shallow defect states: Efficient calculation of donor binding energies in silicon

Accurate prediction of shallow-donor electron binding energies is critical for device modeling, dopant activation, and donor-based quantum technologies. Traditional beyond-DFT approaches (e.g., hybrid functionals, GW) are prohibitively expensive for the large supercells needed to capture the extended, hydrogenic wavefunctions, while semi-local DFT underestimates band gaps and suffers from delocalization errors. We present a simple, practical protocol for shallow donors based on the DFT-1/2 approximate quasiparticle correction that maintains the computational cost of standard DFT and enables supercells up to thousands of atoms. This approach provides a straightforward and reproducible workflow that delivers reliable donor binding energies with minimal computational overhead. Applied to group-V donors in Si, Si:X (X= P, As, Sb, Bi), the method yields binding energies in close agreement with experiment. We found that, for Si:Bi, it is essential to include spin-orbit coupling to achieve near-experimental values with a difference of only $\sim$ 4 meV. For arsenic, the method yields excellent agreement with experiment, with a difference of only ~0.3 meV. For antimony, the results match experiment to within ~5 meV, and for phosphorus, the deviation is within ~8 meV. Beyond its high accuracy, DFT-1/2 offers a significant practical advantage, providing a straightforward, reproducible, and transferable workflow that is less demanding than hybrid functional approaches while remaining fully generalizable to other shallow impurities in semiconductors.

cond-mat.mtrl-sci↗

arXiv2025

The charge cycle of group IV vacancy centers in diamond: From DFT to rate equations

The silicon vacancy center in diamond is a promising system for quantum technologies due to its exceptional optical and spin properties. This has led to great interest in the silicon-vacancy center as well as in the other group IV vacancy centers. In this work, we model the charge cycle of the group IV vacancy centers from the $-2$ to $0$ charge state. As a first step, we compute the onset energies for all relevant one- and two-step ionization processes. Based on these results, we then derive the rate equations using Fermi's golden rule.

cond-mat.mtrl-sci↗

arXiv2024

The anti-distortive polaron : an alternative mechanism for lattice-mediated charge trapping

Polarons can naturally form in materials from the interaction of extra charge carriers with the atomic lattice. Ubiquitous, they are central to various topics and phenomena such as high-T$_c$ superconductivity, electrochromism, photovoltaics, photocatalysis or ion batteries. However, polaron formation remains poorly understood and mostly relies on few historical models such as Landau-Pekar, Fr\"olich, Holstein or Jahn-Teller polarons. Here, from advanced first-principles calculations, we show that the formation of intriguing medium-size polarons in WO$_3$ does not fit with traditional models but instead arises from the undoing of distortive atomic motions inherent to the pristine phase, which lowers the bandgap through dynamical covalency effects. We so introduce the innovative concept of {\it anti-distortive} polaron and rationalize it from a quantum-dot model. We demonstrate that anti-distortive polarons are generic to different families of compounds and clarify how this new concept opens concrete perspectives for a better control of the polaronic state and related properties.

cond-mat.mtrl-sci↗

arXiv2023

Comparative Analysis of Tight-Binding models for Transition Metal Dichalcogenides

We provide a comprehensive analysis of the prominent tight-binding (TB) models for transition metal dichalcogenides (TMDs) available in the literature. We inspect the construction of these TB models, discuss their parameterization used and conduct a thorough comparison of their effectiveness in capturing important electronic properties. Based on these insights, we propose a novel TB model for TMDs designed for enhanced computational efficiency. Utilizing $MoS_2$ as a representative case, we explain why specific models offer a more accurate description. Our primary aim is to assist researchers in choosing the most appropriate TB model for their calculations on TMDs.

cond-mat.mtrl-sci↗

arXiv2023

The decoupled DFT-$\frac{1}{2}$ method for defect excitation energies

The DFT-$\frac{1}{2}$ method is a band gap correction with GW precision at a DFT computational cost. The method was also extended to correct the gap between defect levels, allowing for the calculation of optical transitions. However, this method fails when the atomic character of the occupied and unoccupied defect levels are similar as we illustrate by two examples, the tetrahedral hydrogen interstitial and the negatively charged vacancy in diamond. We solve this problem by decoupling the effect of the occupied and unoccupied defect levels and call this the decoupled DFT-$\frac{1}{2}$ method for defects.

cond-mat.mtrl-sci↗

arXiv2019

Exploring possibilities of band gap measurement with off-axis EELS in TEM

A technique to measure the band gap of dielectric materials with high refractive index by means of energy electron loss spectroscopy (EELS) is presented. The technique relies on the use of a circular (Bessel) aperture and suppresses Cherenkov losses and surface-guided light modes by enforcing a momentum transfer selection. The technique also strongly suppresses the elastic zero loss peak, making the acquisition, interpretation and signal to noise ratio of low loss spectra considerably better, especially for excitations in the first few eV of the EELS spectrum. Simulations of the low loss inelastic electron scattering probabilities demonstrate the beneficial influence of the Bessel aperture in this setup even for high accelerating voltages. The importance of selecting the optimal experimental convergence and collection angles is highlighted. The effect of the created off-axis acquisition conditions on the selection of the transitions from valence to conduction bands is discussed in detail on a simplified isotropic two band model. This opens the opportunity for deliberately selecting certain transitions by carefully tuning the microscope parameters. The suggested approach is experimentally demonstrated and provides good signal to noise ratio and interpretable band gap signals on reference samples of diamond, GaN and AlN while offering spatial resolution in the nm range.

cond-mat.mtrl-sci↗

arXiv2018

Nature of the positron state in CdSe quantum dots

Previous studies have shown that positron-annihilation spectroscopy is a highly sensitive probe of the electronic structure and surface composition of ligand-capped semiconductor Quantum Dots (QDs) embedded in thin films. Nature of the associated positron state, however, whether the positron is confined inside the QDs or localized at their surfaces, has so far remained unresolved. Our positron-annihilation lifetime spectroscopy (PALS) studies of CdSe QDs reveal the presence of a strong lifetime component in the narrow range of 358-371 ps, indicating abundant trapping and annihilation of positrons at the surfaces of the QDs. Furthermore, our ab-initio calculations of the positron wave function and lifetime employing a recent formulation of the Weighted Density Approximation (WDA) demonstrate the presence of a positron surface state and predict positron lifetimes close to experimental values. Our study thus resolves the longstanding question regarding the nature of the positron state in semiconductor QDs, and opens the way to extract quantitative information on surface composition and ligand-surface interactions of colloidal semiconductor QDs through highly sensitive positron-annihilation techniques.

cond-mat.mes-hall↗

arXiv2018

The Anomalous Hall Effect in Magnetic Topological Insulators

The anomalous Hall effect (AHE) is studied on the surface of a 3D magnetic topological insulator. By applying a modified semi-classical framework, all three contributions to the AHE, the intrinsic Berry phase curvature effect, the side-jump effect and the skew scattering effects are systematically treated, and analytical expressions for the conductivities are obtained in terms of the Fermi level, the spatial orientation of the surface magnetization and the concentration of magnetic and non-magnetic impurities. We demonstrate that the AHE can change sign by altering the orientation of the surface magnetization, the concentration of the impurities and also the position of the chemical potential, in agreement with recent experimental observations. Hence, each contribution to the AHE, or even the whole AHE, can be turned off by properly adjusting the given parameters. For example, one can turn off the anomalous hall conductivity in a system with in-plane magnetization by pushing the system into the fully metallic regime.

cond-mat.mes-hall↗

arXiv2018

Crystalline topological states at a topological insulator junction

We consider an interface between two strong time-reversal invariant topological insulators having surface states with opposite spin chirality, or equivalently, opposite mirror Chern number. We show that such an interface supports gapless modes that are protected by mirror symmetry. The interface states are investigated with a continuum model for the Bi2Se3 class of topological insulators that takes into account terms up to third order in the crystal momentum, which ensures that the model has the correct symmetry. The model parameters are obtained from ab initio calculations. Finally, we consider the effect of rotational mismatch at the interface, which breaks the mirror symmetry and opens a gap in the interface spectrum.

cond-mat.mes-hall↗

arXiv2018

Advanced first-principles theory of superconductivity including both lattice vibrations and spin fluctuations: The case of FeB$_4$

We present an advanced method to study spin fluctuations in superconductors quantitatively, and entirely from first principles. This method can be generally applied to materials where electron-phonon coupling and spin fluctuations coexist. We employ it here to examine the recently synthesized superconductor iron tetraboride (FeB$_4$) with experimental $T_{\mathrm{c}}\sim 2.4$ K [H. Gou \textit{et al.}, Phys. Rev. Lett. \textbf{111}, 157002 (2013)]. We prove that FeB$_4$ is particularly prone to ferromagnetic spin fluctuations due to the presence of iron, resulting in a large Stoner interaction strength, $I=1.5$ eV, as calculated from first principles. The other important factor is its Fermi surface that consists of three separate sheets, among which two nested ellipsoids. The resulting susceptibility has a ferromagnetic peak around $\textbf{q}=0$, from which we calculated the repulsive interaction between Cooper pair electrons using the random phase approximation. Subsequently, we combined the electron-phonon interaction calculated from first principles with the spin fluctuation interaction in fully anisotropic Eliashberg theory calculations. We show that the resulting superconducting gap spectrum is conventional, yet very strongly depleted due to coupling to the spin fluctuations. The critical temperature decreases from $T_{\mathrm{c}}= 41$ K, if they are not taken into account, to $T_{\mathrm{c}}= 1.7$ K, in good agreement with the experimental value.

cond-mat.supr-con↗

arXiv2017

Exceeding the Shockley-Queisser limit within the detailed balance framework

The Shockley-Queisser limit is one of the most fundamental results in the field of photovoltaics. Based on the principle of detailed balance, it defines an upper limit for a single junction solar cell that uses an absorber material with a specific band gap. Although methods exist that allow a solar cell to exceed the Shockley-Queisser limit, here we show that it is possible to exceed the Shockley-Queisser limit without considering any of these additions. Merely by introducing an absorptivity that does not assume that every photon with an energy above the band gap is absorbed, efficiencies above the Shockley-Queisser limit are obtained. This is related to the fact that assuming optimal absorption properties also maximizes the recombination current within the detailed balance approach. We conclude that considering a finite thickness for the absorber layer allows the efficiency to exceed the Shockley-Queisser limit, and that this is more likely to occur for materials with small band gaps.

cond-mat.mtrl-sci↗

arXiv2017

Doping anatase TiO2 with group V-b and VI-b transition metal atoms: a hybrid functional first-principles study

We investigate the role of transition metal atoms of group V-b (V, Nb, and Ta) and VI-b (Cr, Mo, and W) as n- or p-type dopants in anatase TiO2 using thermodynamic principles and density functional theory with the Heyd-Scuseria-Ernzerhof HSE06 hybrid functional. The HSE06 functional provides a realistic value for the band gap, which ensures a correct classification of dopants as shallow or deep donors or acceptors. Defect formation energies and thermodynamic transition levels are calculated taking into account the constraints imposed by the stability of TiO2 and the solubility limit of the impurities. Nb, Ta, W and Mo are identified as shallow donors. Although W provides two electrons, Nb and Ta show a considerably lower formation energy, in particular under O-poor conditions. Mo donates in principle one electron, but under specific conditions can turn into a double donor. V impurities are deep donors and Cr shows up as an amphoteric defect, thereby acting as an electron trapping center in n-type TiO2 especially under O-rich conditions. A comparison with the available experimental data yields excellent agreement.

cond-mat.mtrl-sci↗

arXiv2017

Transmission in graphene-topological insulator heterostructures

We investigate scattering of the topological surface state of a three-dimensional time-reversal invariant topological insulator when graphene is deposited on the topological-insulator surface. Specifically, we consider the (111) surface of a Bi$_2$Se$_3$-like topological insulator. We present a low-energy model for the bulk graphene-topological insulator heterostructure and we calculate the transmission probability at zigzag and armchair edges of the deposited graphene, and the conductance through graphene nanoribbon barriers and show that its features can be understood from antiresonances in the transmission probability.

cond-mat.mes-hall↗

arXiv2016

Anisotropic type-I superconductivity and anomalous superfluid density in OsB 2

We present a microscopic study of superconductivity in OsB2 , and discuss the origin and characteristic length scales of the superconducting state. From first-principles we show that OsB2 is characterized by three different Fermi sheets, and we prove that this fermiology complies with recent quantum-oscillation experiments. Using the found microscopic properties, and experimental data from the literature, we employ Ginzburg-Landau relations to reveal that OsB2 is a distinctly type-I superconductor with very low Ginzburg-Landau parameter kappa - a rare property among compound materials. We show that the found coherence length and penetration depth corroborate the measured thermodynamic critical field. Moreover, our calculation of the superconducting gap structure using anisotropic Eliashberg theory and ab initio calculated electron-phonon interaction as input reveals a single but anisotropic gap. The calculated gap spectrum is shown to give an excellent account for the unconventional behavior of the superfluid density of OsB2 measured in experiments as a function of temperature. This reveals that gap anisotropy can explain such behavior, observed in several compounds, which was previously attributed solely to a two-gap nature of superconductivity.

cond-mat.supr-con↗

arXiv2016

Positron surface state as a spectroscopic probe for characterizing surfaces of topological insulator materials

Topological insulators are attracting considerable interest due to their potential for technological applications and as platforms for exploring wide-ranging fundamental science questions. In order to exploit, fine-tune, control and manipulate the topological surface states, spectroscopic tools which can effectively probe their properties are of key importance. Here, we demonstrate that positrons provide a sensitive probe for topological states, and that the associated annihilation spectrum provides a new technique for characterizing these states. Firm experimental evidence for the existence of a positron surface state near Bi$_2$Te$_2$Se with a binding energy of $E_b = 2.7 \pm 0.2 \, \text{eV}$ is presented, and is confirmed by first-principles calculations. Additionally, the simulations predict a significant signal originating from annihilation with the topological surface states and shows the feasibility to detect their spin-texture through the use of spin-polarized positron beams.

cond-mat.mtrl-sci↗

arXiv2016

First-principles analysis of the efficiency of photovoltaic layers for CuAu-like chalcogenides and silicon

Chalcopyrite semiconductors are of considerable interest for application as absorber layers in thin-film photovoltaic cells. When growing films of these compounds, however, they are often found to contain CuAu- like domains, a metastable phase of chalcopyrite. It has been reported that for CuInS2, the presence of the CuAu-like phase improves the short circuit current of the chalcopyrite-based photovoltaic cell. We investigate the thermodynamic stability of both phases for a selected list of I-III-VI2 materials using a first-principles density functional theory approach. For the CuIn-VI2 compounds, the difference in formation energy between the chalcopyrite and CuAu-like phase is found to be close to 2 meV/atom, indicating a high likelihood of the presence of CuAu-like domains. Next, we calculate the Spectroscopic Limited Maximum Efficiency (SLME) of the CuAu- like phase and compare the results with those of the corresponding chalcopyrite phase. We identify several candidates with a high efficiency, such as CuAu-like CuInS2, for which we obtain an SLME of 29% at a thickness of 500 nm. We observe that the SLME can have values above the Shockley-Queisser (SQ) limit, and show that this can occur because the SQ limit assumes the absorptivity to be a step function, thus overestimating the radiative recombination in the detailed balance approach. This means that it is possible to find higher theoretical efficiencies within this framework simply by calculating the J-V characteristic with an absorption spectrum. Finally, we expand our SLME analysis to indirect band gap absorbers by studying silicon, and find that the SLME quickly overestimates the reverse saturation current of indirect band gap materials, drastically lowering their calculated efficiency.

cond-mat.mtrl-sci↗

arXiv2016

Extended homologous series of Sn-O layered systems: a first-principles study

Apart from the most studied tin-oxide compounds, SnO and SnO2, intermediate states have been claimed to exist for more than a hundred years. In addition to the known homologous series (Seko et al., Phys. Rev. Lett. 100, 045702 (2008)), we here predict the existence of several new compounds with an O concentration between 50 % (SnO) and 67 % (SnO2). All these intermediate compounds are constructed from removing one or more (101) oxygen layers of SnO2. Since the van der Waals (vdW) interaction is known to be important for the Sn-Sn interlayer distances, we use a vdW-corrected functional, and compare these results with results obtained with PBE and hybrid functionals. We present the electronic properties of the intermediate structures and we observe a decrease of the band gap when (i) the O concentration increases and (ii) more SnO-like units are present for a given concentration. The contribution of the different atoms to the valence and conduction band is also investigated.

cond-mat.mtrl-sci↗