arXiv subjects

Bastian Leykauf

Publications and source records attributed to Bastian Leykauf.

9 recordsLinked to original sources

arXiv2026

Estimating subsurface water mass changes with ground-based gravimetry

Gravitational force is proportional to the mass of an attracting body; therefore, changes in subsurface mass can be detected using gravimetry. In the near subsurface, mass variations are primarily driven by changes in water storage, meaning that gravity measurements provide direct information on variations in water mass. Traditionally, groundwater and soil water dynamics are monitored using point-scale instruments that require direct installation into the subsurface. In contrast, gravimetry is a non-invasive method that integrates signals over a larger spatial extent. Recent advancements in gravimeter technology have significantly improved measurement accuracy and long-term stability under field conditions, thereby expanding their potential for hydrological applications. This review summarizes recent developments in gravimetric instrumentation and provides essential background on gravimeters used for ground-based measurements and their application in hydrology, aiming to facilitate their broader use. In addition, it presents an overview of studies in hydrology and hydrogeology that have successfully applied gravimetry to quantify subsurface water storage changes, estimate hydrological parameters, and constrain numerical models. A perspective on future advancement in gravimetry and resulting potential applications is given.

physics.geo-ph↗

arXiv2025

Comparison of laser system designs for quantum technologies: BECCAL flight system vs. BECCAL ground test bed

We present the design of laser systems for the Bose-Einstein Condensate and Cold Atom Laboratory (BECCAL) payload, enabling numerous quantum technological experiments onboard the International Space Station (ISS), in particular dual species 87Rb and 41K Bose-Einstein condensates. A flight model (FM) and a commercial off the shelf (COTS) based model are shown, both of which meet the BECCAL requirements in terms of functionality, but have differing size, weight and power (SWaP) and environmental requirements. The capabilities of both models are discussed and characteristics compared. The flight model of BECCAL uses specifically developed and qualified custom components to create a compact and robust system suitable for long-term remote operation onboard the ISS. This system is based on ECDL-MOPA lasers and free-space optical benches made of Zerodur, as well as commercial fibre components. The COTS-based system utilizes entirely commercial parts to create a functionally equivalent system for operation in a standard laboratory, without the strict SWaP and environmental constraints of the flight model.

physics.atom-ph↗

arXiv2024

Additively manufactured ceramics for compact quantum technologies

Quantum technologies are advancing from fundamental research in specialized laboratories to practical applications in the field, driving the demand for robust, scalable, and reproducible system integration techniques. Ceramic components can be pivotal thanks to high stiffness, low thermal expansion, and excellent dimensional stability under thermal stress. We explore lithography-based additive manufacturing of technical ceramics especially for miniaturized physics packages and electro-optical systems. This approach enables functional systems with precisely manufactured, intricate structures and high mechanical stability while minimizing size and weight. It facilitates rapid prototyping, simplifies fabrication and leads to highly integrated, reliable devices. As an electrical insulator with low outgassing and high temperature stability, printed technical ceramics such as Al2O3 and AlN bridge a technology gap in quantum technology and offer advantages over other printable materials. We demonstrate this potential with CerAMRef, a micro-integrated rubidium D2 line optical frequency reference on a printed Al2O3 micro-optical bench and housing. The frequency instability of the reference is comparable to laboratory setups while the volume of the integrated spectroscopy setup is only 6 ml. We identify potential for future applications in compact atomic magnetometers, miniaturized optical atom traps, and vacuum system integration.

physics.atom-ph↗

arXiv2022

Light-Pulse Atom Interferometric Test of Continuous Spontaneous Localization

We investigate the effect of the Continuous Spontaneous Localization (CSL) model on light-pulse atom interferometry. Using a path-integral approach with an additional stochastic potential accounting for CSL, we derive an exponential loss of the contrast that scales linearly with the interferometer time $T$ if both interferometer arms are spatially separated. We compare our theoretical results with measurements from a cold rubidium atom interferometer based on counter-propagating two-photon transitions with pulse separation times up to $T$ = 260 ms and obtain the corresponding bounds on the CSL parameters.

quant-ph↗

arXiv2022

Linien: A versatile, user-friendly, open-source FPGA-based tool for frequency stabilization and spectroscopy parameter optimization

We present a user-friendly and versatile tool for laser frequency stabilization. Its main focus is spectroscopy locking, but the software is suitable for lock-in techniques in general as well as bare PID operation. Besides allowing for sinusoidal modulation (up to 50 MHz), triangular ramp scanning, IQ demodulation (1 $f$ to 5 $f$), IIR and PID filtering, Linien features two different algorithms for automatic lock point selection; one of them performs time-critical tasks completely on FPGA. Linien is capable of autonomously optimizing spectroscopy parameters by means of machine learning and can measure the error signal's power spectral density. The software is built in a modular way, providing both a graphical user interface as well as a Python scripting interface. It is based on the RedPitaya STEMLab platform but may be ported to different systems.

physics.ins-det↗

arXiv2018

Mapping the absolute magnetic field and evaluating the quadratic Zeeman effect induced systematic error in an atom interferometer gravimeter

Precisely evaluating the systematic error induced by the quadratic Zeeman effect is important for developing atom interferometer gravimeters aiming at an accuracy in the regime ( ). This paper reports on the experimental investigation of Raman spectroscopy-based magnetic field measurements and the evaluation of the systematic error in the Gravimetric Atom Interferometer (GAIN) due to quadratic Zeeman effect. We discuss Raman duration and frequency step size dependent magnetic field measurement uncertainty, present vector light shift (VLS) and tensor light shift (TLS) induced magnetic field measurement offset, and map the absolute magnetic field inside the interferometer chamber of GAIN with an uncertainty of 0.72 nT and a spatial resolution of 12.8 mm. We evaluate the quadratic Zeeman effect induced gravity measurement error in GAIN as . The methods shown in this paper are important for precisely mapping the absolute magnetic field in vacuum and reducing the quadratic Zeeman effect induced systematic error in Raman transition-based precision measurements, such as atomic interferometer gravimeters.

physics.app-ph↗

arXiv2018

Observation of vector and tensor light shifts in 87Rb using near-resonant, stimulated Raman spectroscopy

We present the derivation of the frequency dependent scalar, vector, and tensor dynamical polarizabilities for the two hyperfine levels of the 87Rb atom 5s ground state. Based on the characterization of the dynamical polarizabilities, we analyze and measure the differential vector and tensor light shift between the 5s ground state sub-levels with near-resonant, stimulated Raman transitions. These results clarify that the tensor polarizabilities for the ground states of alkali atoms are absent when the light field is far-detuned from the atomic resonance and the total electronic angular momentum J is a good quantum number. In the near resonant case, the light shifts are non-trivial and the determination of the frequency dependent vector and tensor dynamic polarizabilities will help to achieve higher fidelities for applications of neutral atoms in quantum information and precision measurements.

physics.atm-clus↗

arXiv2015

Mobile quantum gravity sensor with unprecedented stability

Changes of surface gravity on Earth are of great interest in geodesy, earth sciences and natural resource exploration. They are indicative of Earth system's mass redistributions and vertical surface motion, and are usually measured with falling corner-cube- and superconducting gravimeters (FCCG and SCG). Here we report on absolute gravity measurements with a mobile quantum gravimeter based on atom interferometry. The measurements were conducted in Germany and Sweden over periods of several days with simultaneous SCG and FCCG comparisons. They show the best-reported performance of mobile atomic gravimeters to date with an accuracy of $\mathrm{39\,nm/s^2}$ and long-term stability of $\mathrm{0.5\,nm/s^2}$ short-term noise of $96\,\mathrm{nm/s^2/\sqrt{Hz}}$. These measurements highlight the unique properties of atomic sensors. The achieved level of performance in a transportable instrument enables new applications in geodesy and related fields, such as continuous absolute gravity monitoring with a single instrument under rough environmental conditions.

physics.atom-ph↗

arXiv2015

The effect of wavefront aberrations in atom interferometry

Wavefront aberrations are one of the largest uncertainty factors in present atom interferometers. We present a detailed numerical and experimental analysis of this effect based on measured aberrations from optical windows. By placing windows into the Raman beam path of our atomic gravimeter, we verify for the first time the induced bias in very good agreement with theory. Our method can be used to reduce the uncertainty in atomic gravimeters by one order of magnitude resulting in an error of less than $3\times 10^{-10}\,g$ and it is suitable in a wide variety of atom interferometers with thermal or ultra cold atoms. We discuss the limitations of our method, potential improvements and its role in future generation experiments.

physics.atom-ph↗