SearcharxivSearch

arXiv subjects

Beate Paulus

Publications and source records attributed to Beate Paulus.

At least 19 recordsLinked to original sources

Complementary Eigen-Zundel Interpretation Reconciles Thermodynamics and Spectroscopy of Excess Protons in Aqueous HF Solutions

Aqueous solutions of HF and HCl behave very differently at intermediate concentrations: HCl dissociates completely, whereas HF remains only partially dissociated and forms bifluoride (HF$_2^-$). This should lead to different excess-proton spectra in HF and HCl solutions, in contrast to experimental reports. Using ab initio molecular dynamics, we show that in HF the proton is not firmly bound to F$^-$, as suggested by textbook chemistry, but dynamically shared with a hydrating water molecule. This is rationalized by a modified Eigen-state description which also explains the formation of HF$_2^-$. The similar vibrational spectra of HF and HCl solutions are explained by a complementary Zundel picture in terms of almost identical excess proton transfer free-energy profiles for HF and HCl. These results reconcile thermodynamic and spectroscopic observations and provide a unified microscopic picture of excess protons in aqueous solution.

physics.chem-ph

Modification of the magnetic and electronic properties of the graphene-Ni(111) interface via halogens intercalation

Electronic decoupling of graphene from metallic and semiconducting substrates via intercalation of different species is one of the widely used approaches in studies of graphene. In the present work the modification of the electronic and magnetic properties of graphene on ferromagnetic Ni(111) layer via intercalation of halogen atoms (X = F, Cl, Br) is studied using the state-of-the-art density-functional theory approach. It is found that in all gr/X/Ni(111) intercalation systems a graphene layer is fully electronically decoupled from the ferromagnetic substrate; however, different kind (electron or hole) and level of doping can be achieved. Despite the extremely small magnetic moment of C-atoms in graphene observed after halogens intercalation, the sizeable spin-splitting up to $35$ meV for the linearly dispersing graphene $π$ bands is found. The obtained theoretical data bring new ideas on the formation of the graphene-ferromagnet interfaces where spin polarized free-standing graphene layer can be formed with the possible application of these systems in electronics and spintronics.

cond-mat.mtrl-sci

Graphene Layer Morphology as an Indicator of the Metals Alloy Formation at the Interface

The intercalation of different species in graphene-metal interfaces is widely used to stabilise the artificial phases of different materials. However, formation of the surface alloys upon the guest-metal intercalation is still an open question, which is very important for the fabrication of graphene-based interfaces with desired properties. Here, the widely studied interfaces of graphene with Ru(0001) and Ir(111) were modified using intercalation of a thin Mn layer and investigated by means of scanning tunnelling microscopy (STM) accompanied by density functional theory (DFT) calculations, which reproduce the observed experimental data. It is found that Mn forms a pseudomorphic layer on Ru(0001) under a strongly buckled graphene layer. In case of Mn intercalation in graphene/Ir(111), a buried thin layer of MnIr alloy is formed beneath the first Ir layer under a flat graphene layer. This unexpected observation is explained on the basis of phase diagram pictures for the Mn-Ru and Mn-Ir systems as well as via comparison of calculated total energies for the respective interfaces. Our results shed light on the understanding of mechanisms of the alloys formation at the graphene-metal interfaces and demonstrate their potential for the preparation of tailored interfaces for future graphene-based applications.

cond-mat.mtrl-sci

Synthesis of Multifunctional Charge Transfer Agents: Towards Single Walled Carbon Nanotubes with Defined Covalent Functionality and Preserved π System

The attachment of well-defined charge transfer agents to the surface of nanomaterials is an efficient strategy to control their charge density and also to tune their optical, electrical, and physicochemical properties. Particularly interesting are charge transfer agents that either donate or withdraw electrons depending on the arrangements of their building units and that promise a non-destructive attachment to delicate nanomaterials like sp$^2$ compounds. In this work, we rationally synthesize molecular moieties with versatile functionalities. A reactive anchor group allows to attach them to carbon nanotubes as defined charge transfer agents while preserving the tube $π$-conjugation. The charge transfer agents were synthesized through the stepwise nucleophilic substitution of either one (monosubstituted series) or two chlorine (disubstituted series) atoms of cyanuric chloride by aniline derivatives containing one, two or three methoxy groups in the para and meta positions. Variation in the number and position of methoxy as an electron transferring group help us to manipulate the electronic and optical properties of the molecular probes and their charge transfer to the SWNTs systematically. The correlation between the optical properties of these molecular probes and their functionality was investigated by experiments and quantum chemical calculations. While the optoelectronic properties of the conjugated charge transfer agents were dominated by the aniline segments, the triazine warrants the ability to nondestructively attach to the surface of SWNTs. This study is one step ahead towards the production of SWNTs with desired optical and electrical properties by covalent $π$-preserving functionalization.

cond-mat.mes-hall

Electronic structure and magnetic properties of the graphene/Ni3Mn/Ni(111) trilayer

Experimental and theoretical studies of manganese deposition on graphene/Ni(111) shows that a thin ferromagnetic Ni3Mn layer, which is protected by the graphene overlayer, is formed upon Mn intercalation. The electronic bands of graphene are affected by Ni3Mn interlayer formation through a slight reduction of n-type doping compared to graphene/Ni(111) and a suppression of the interface states characteristic of graphene/Ni(111). Our DFT-based theoretical analysis of interface geometric, electronic, and magnetic structure gives strong support to our interpretation of the experimental scanning tunneling microscopy, low energy electron diffraction, and photoemission results, and shows that the magnetic structure of graphene is strongly influenced by Ni3Mn formation.

cond-mat.mtrl-sci

Quantification of electron correlation effects - Quantum Information Theory versus Method of Increments

Understanding electron correlation is crucial for developing new concepts in electronic structure theory, especially for strongly correlated electrons. We compare and apply two different approaches to quantify correlation contributions of orbitals: Quantum Information Theory (QIT) based on a Density Matrix Renormalization Group (DMRG) calculation and the Method of Increments (MoI). Although both approaches define very different correlation measures, we show that they exhibit very similar patterns when being applied to a polyacetelene model system. These results suggest one may deduce from one to the other, allowing the MoI to leverage from QIT results by screening correlation contributions with a cheap ("sloppy") DMRG with a reduced number of block states. Or the other way around, one may select the active space in DMRG from cheap one-body MoI calculations.

physics.chem-ph

The graphene/n-Ge(110) interface: structure, doping, and electronic properties

The implementation of graphene in semiconducting technology requires the precise knowledge about the graphene-semiconductor interface. In our work the structure and electronic properties of the graphene/$n$-Ge(110) interface are investigated on the local (nm) and macro (from $μ\mathrm{m}$ to mm) scales via a combination of different microscopic and spectroscopic surface science techniques accompanied by density functional theory calculations. The electronic structure of freestanding graphene remains almost completely intact in this system, with only a moderate $n$-doping indicating weak interaction between graphene and the Ge substrate. With regard to the optimization of graphene growth it is found that the substrate temperature is a crucial factor, which determines the graphene layer alignment on the Ge(110) substrate during its growth from the atomic carbon source. Moreover, our results demonstrate that the preparation routine for graphene on the doped semiconducting material ($n$-Ge) leads to the effective segregation of dopants at the interface between graphene and Ge(110). Furthermore, it is shown that these dopant atoms might form regular structures at the graphene/Ge interface and induce the doping of graphene. Our findings help to understand the interface properties of the graphene-semiconductor interfaces and the effect of dopants on the electronic structure of graphene in such systems.

cond-mat.mtrl-sci

Analysis of Electron Correlation Effects in Strongly Correlated Systems ($\rm N_2$ and $\rm N_2^+$) by applying DMRG and Quantum Information Theory

The dissociation of $\rm N_2$ and $\rm N_2^+$ has been studied by using the \emph{ab initio} Density Matrix Renormalization Group (DMRG) method. Accurate Potential Energy Surfaces (PES) have been obtained for the electronic ground states of $\rm N_2$ ($\rm X^1Σ_g^+$) and $\rm N_2^+$ ($\rm X^2Σ_g^+$) as well as for the $\rm N_2^+$ excited state $\rm B^2Σ_u^+$. Inherently to the DMRG approach, the eigenvalues of the reduced density matrix ($ρ$) and their correlation functions are at hand. Thus we can apply Quantum Information Theory (QIT) directly, and investigate how the wave function changes along the PES and depict differences between the different states. Moreover by characterizing quantum entanglement between different pairs of orbitals and analyzing the reduced density matrix, we achieved a better understanding of the multi-reference character featured by these systems.

physics.chem-ph

Cyanographone and Isocyanographone $-$ two asymmetrically functionalized graphene pseudohalides and their potential use in chemical sensing

Graphene pseudohalides are natural candidates for use in molecular sensing due to their greater chemical activity as compared to both graphene halides and pristine graphene. Though their study is still in its infancy, being hindered until recently by the unavailability of both selective and efficient procedures for their synthesis, they promise to considerably widen the application potential of chemically modified graphenes. Herein, we employ vdW-DFT to study the structural and electronic properties of two selected graphene pseudohalides namely cyanographone and isocyanographone and investigate the potential use of the latter as a chemical sensor via electron transport calculations.

cond-mat.mtrl-sci

Gap control in phosphorene/BN structures from first principles calculations

Using both DFT as well as $G_0W_0$ calculations, we investigate static and dynamic effects on the phosphorene band gap upon deposition and encapsulation on/in BN multilayers. We demonstrate how competing long- and short-range effects cause the phosphorene band gap to increase at low P - BN interlayer spacings, while the band gap is found to drop below that of isolated phosphorene in the BN/P bilayer at intermediate distances around 4 Å. Subsequent stacking of BN layers, i.e. BN/BN/P and BN/BN/BN/P is found to have a negligible effect at the DFT level while at the $G_0W_0$ increased screening lowers the band gap as compared to the BN/P bilayer. Encapsulation between two BN layer is found to increase the phosphorene band gap by a value approximately twice that observed when going from freestanding phosphorene to BN/P. We further investigate the use of the $\rm{GLLB-SC}$ functional as a starting point for $G_0W_0$ calculations showing it to, in the case of phosphorene, yield results close to those obtained from $GW_0@\rm{PBE}$ calculations.

cond-mat.mtrl-sci

Strong 1D localization and highly anisotropic electron-hole masses in heavy-halogen functionalized graphenes

While halogenation of graphene presents a fascinating avenue to the construction of a chemically and physically diverse class of systems, their application in photovoltaics has been hindered by often prohibitively large optical gaps. Herein we study the effects of partial bromination and chlorination on the structure and optoelectronic properties of both graphane and fluorographene. We find brominated and chlorinated fluorographene derivatives to be as stable as graphane making them likely to be durable even at elevated temperatures. A detailed investigation of the systems band structure reveals significant 1D localization of the charge carriers as well as strongly electron-hole asymmetric effective masses. Lastly using $G_0W_0$ and BSE, we investigate the optical adsorption spectra of the aforementioned materials whose first adsorption peak is shown to lie close to the optimal peak position for photovoltaic applications ($\approx 1.5$ eV).

cond-mat.mtrl-sci

Curvature-dependent adsorption of water inside and outside armchair carbon nanotubes

The curvature dependence of the physisorption properties of a water molecule inside and outside an armchair carbon nanotube (CNTs) is investigated by an incremental density-fitting local coupled cluster treatment with single and double excitations and perturbative triples (DF-LCCSD(T)) study. Our results show that a water molecule outside and inside (n, n) CNTs (n=4, 5, 6, 7, 8, 10) is stabilized by electron correlation. The adsorption energy of water inside CNTs decreases quickly with the decrease of curvature (increase of radius) and the configuration with the oxygen pointing towards the CNT wall is the most stable one. However, when the water molecule is adsorbed outside the CNT, the adsorption energy varies only slightly with the curvature and the configuration with hydrogens pointing towards the CNT wall is the most stable one. We also use the DF-LCCSD(T) results to parametrize Lennard-Jones (LJ) force fields for the interaction of water both with the inner and outer sides of CNTs and with graphene representing the zero curvature limit. It is not possible to reproduce all DF-LCCSD(T) results for water inside and outside CNTs of different curvature by a single set of LJ parameters, but two sets have to be used instead. Each of the two resulting sets can reproduce three out of four minima of the effective potential curves reasonably well. These LJ models are then used to calculate the water adsorption energies of larger CNTs, approaching the graphene limit, thus bridging the gap between CNTs of increasing radius and flat graphene sheets.

physics.chem-ph

ORBKIT - A Modular Python Toolbox for Cross-Platform Post-Processing of Quantum Chemical Wavefunction Data

ORBKIT is a toolbox for post-processing electronic structure calculations based on a highly modular and portable Python architecture. The program allows computing a multitude of electronic properties of molecular systems on arbitrary spatial grids from the basis set representation of its electronic wavefunction, as well as several grid-independent properties. The required data can be extracted directly from the standard output of a large number of quantum chemical programs. ORBKIT can be used as a standalone program to determine standard quantities, for example, the electron density, molecular orbitals, and derivatives thereof. The cornerstone of ORBKIT is its modular structure. The existing basic functions can be arranged in an individual way and can be easily extended by user-written modules to determine any other desired quantities. ORBKIT offers multiple output formats that can be processed by common visualization tools (VMD, Molden, etc.). Additionally, ORBKIT possesses routines to order molecular orbitals computed at different nuclear configurations according to their electronic character and to interpolate the wavefunction between these configurations. The program is open-source under GNU-LGPLv3 license and freely available at http://sourceforge.net/projects/orbkit/. This article provides an overview of ORBKIT with particular focus on its capabilities and applicability, and includes several example calculations.

physics.chem-ph

On the calculation of complete dissociation curves of closed-shell pseudo-onedimensional systems through the multireference method of increments

The Method of Increments (MoI) has been employed using a multireference approach to calculate the dissociation curve of beryllium ring-shaped clusters Be$_n$ of different sizes. Benchmarks obtained through different single and multireference methods including the ab initio Density Matrix Renormalization Group (DMRG) were used to verify the validity of the MoI truncation which showed a reliable behavior for the whole dissociation curve. Moreover we investigated the size dependence of the correlation energy at different distances in order to extrapolate the values for the periodic chain and to discuss the transition from a metal-like to a insulating-like behavior of the wave function through quantum chemical considerations.

cond-mat.mtrl-sci

First multi-reference correlation treatment of bulk metals

Existence of the sp-d hybridization of the valence band states of the fcc Ca and Sr in the vicinity of the Fermi level indicates that their electronic wave function can have a multi-reference (MR) character. We performed a wave function-based correlation treatment for these materials by means of the method of increments. As oppose to the single-reference correlation treatment (here: coupled cluster), which fails to describe cohesive properties in both cases, employing the MR averaged coupled pair functional one can achieve almost 100 % of the experimental correlation energy.

cond-mat.mtrl-sci

On the physisorption of water on graphene: a CCSD(T) study

The electronic structure of the zero-gap two-dimensional graphene has a charge neutrality point exactly at the Fermi level that limits the practical application of this material. There are several ways to modify the Fermi-level-region of graphene, e.g. adsorption of graphene on different substrates or different molecules on its surface. In all cases the so-called dispersion or van der Waals interactions can play a crucial role in the mechanism, which describes the modification of electronic structure of graphene. The adsorption of water on graphene is not very accurately reproduced in the standard density functional theory (DFT) calculations and highly-accurate quantum-chemical treatments are required. A possibility to apply wavefunction-based methods to extended systems is the use of local correlation schemes. The adsorption energies obtained in the present work by means of CCSD(T) are much higher in magnitude than the values calculated with standard DFT functional although they agree that physisorption is observed. The obtained results are compared with the values available in literature for binding of water on the graphene-like substrates.

cond-mat.mtrl-sci

Hydrogen bonding in infinite hydrogen fluoride and hydrogen chloride chains

Hydrogen bonding in infinite HF and HCl bent (zigzag) chains is studied using the ab initio coupled-cluster singles and doubles (CCSD) correlation method. The correlation contribution to the binding energy is decomposed in terms of nonadditive many-body interactions between the monomers in the chains, the so-called energy increments. Van der Waals constants for the two-body dispersion interaction between distant monomers in the infinite chains are extracted from this decomposition. They allow a partitioning of the correlation contribution to the binding energy into short- and long-range terms. This finding affords a significant reduction in the computational effort of ab initio calculations for solids as only the short-range part requires a sophisticated treatment whereas the long-range part can be summed immediately to infinite distances.

cond-mat.mtrl-sci

Basis set convergence in extended systems: infinite hydrogen fluoride and hydrogen chloride chains

Basis set convergence of the Hartree-Fock and the correlation energy is examined for the hydrogen bonded infinite bent chains (HF)_infinity and (HCl)_infinity. We employ series of correlation consistent basis sets up to quintuple zeta quality together with a coupled cluster method (CCSD) to describe electron correlation on ab initio level. The Hartree-Fock energy converges rapidly with increasing basis set quality whereas the correlation energy is found to be slowly convergent for the same series of basis sets. We study basis set extrapolation for (HF)_infinity and (HCl)_infinity and show that it substantially enhances the accuracy of both the Hartree-Fock and the correlation energy in extended systems.

cond-mat.other