arXiv subjects

Beatriz Martín-García

Publications and source records attributed to Beatriz Martín-García.

At least 37 records · Page 2Linked to original sources

arXiv2024

Unveiling intrinsic bulk photovoltaic effect in atomically thin ReS2

The bulk photovoltaic effect (BPVE) offers a promising avenue to surpass the efficiency limitations of current solar cell technology. However, disentangling intrinsic and extrinsic contributions to photocurrent remains a significant challenge. Here, we fabricate high-quality, lateral devices based on atomically thin ReS2 with minimal contact resistance, providing an optimal platform for distinguishing intrinsic bulk photovoltaic signals from other extrinsic photocurrent contributions originating from interfacial effects. Our devices exhibit large bulk photovoltaic performance with intrinsic responsivities of 1 mA/W in the visible range, without the need for external tuning knobs such as strain engineering. Our experimental findings are supported by theoretical calculations. Furthermore, our approach can be extrapolated to investigate the intrinsic BPVE in other non-centrosymmetric van der Waals materials, paving the way for a new generation of efficient light-harvesting devices.

cond-mat.mes-hall↗

arXiv2024

Gate-tunable spin Hall effect in trilayer graphene/group-IV monochalcogenide van der Waals heterostructures

Spintronic devices require materials that facilitate effective spin transport, generation, and detection. In this regard, graphene emerges as an ideal candidate for long-distance spin transport owing to its minimal spin-orbit coupling, which, however, limits its capacity for effective spin manipulation. This problem can be overcome by putting spin-orbit coupling materials in close contact to graphene leading to spin-orbit proximity and, consequently, efficient spin-to-charge conversion through mechanisms such as the spin Hall effect. Here, we report and quantify the gate-dependent spin Hall effect in trilayer graphene proximitized with tin sulfide (SnS), a group-IV monochalcogenide which has recently been predicted to be a viable alternative to transition-metal dichalcogenides for inducing strong spin-orbit coupling in graphene. The spin Hall angle exhibits a maximum around the charge neutrality point of graphene up to room temperature. Our findings expand the library of materials that induce spin-orbit coupling in graphene to a new class, group-IV monochalcogenides, thereby highlighting the potential of two-dimensional materials to pave the way for the development of innovative spin-based devices and future technological applications.

cond-mat.mes-hall↗

arXiv2024

A seamless graphene spin valve based on proximity to van der Waals magnet Cr$_2$Ge$_2$Te$_6$

Pristine graphene is potentially an ideal medium to transport spin information. Proximity effects, where a neighbouring material is used to alter the properties of a material in adjacent (or proximitized) regions, can also be used in graphene to generate and detect spins by acquiring spin-orbit coupling or magnetic exchange coupling. However, the development of seamless spintronic devices that are based uniquely on proximity effects remains challenging. Here, we report a two-dimensional graphene spin valve that is enabled by proximity to the van der Waals magnet Cr$_2$Ge$_2$Te$_6$. Spin precession measurements show that graphene acquires both spin-orbit coupling and magnetic exchange coupling when interfaced with the Cr$_2$Ge$_2$Te$_6$. This leads to spin generation by both electrical spin injection and the spin Hall effect, while retaining long-distance spin transport. The simultaneous presence of spin-orbit coupling and magnetic exchange coupling also leads to a sizeable anomalous Hall effect.

cond-mat.mes-hall↗

arXiv2024

Control of charge-spin interconversion in van der Waals heterostructures with chiral charge density waves

A charge density wave (CDW) represents an exotic state in which electrons are arranged in a long range ordered pattern in low-dimensional materials. Although our understanding of the fundamental character of CDW has been enriched after extensive studies, its relationship with functional phenomena remains relatively limited. Here, we show an unprecedented demonstration of a tunable charge-spin interconversion (CSI) in graphene/1T-TaS$_2$ van der Waals heterostructures by manipulating the distinct CDW phases in 1T-TaS$_2$. Whereas CSI from spins polarized in all three directions are observed in the heterostructure when the CDW phase does not show commensurability, the output of one of the components disappears and the other two are enhanced when the CDW phase becomes commensurate. The experimental observation is supported by first-principles calculations, which evidence that chiral CDW multidomains are at the origin of the switching of CSI. Our results uncover a new approach for on-demand CSI in low-dimensional systems, paving the way for advanced spin-orbitronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Tailoring Photoluminescence by Strain-Engineering in Layered Perovskite Flakes

Strain is an effective strategy to modulate the optoelectronic properties of 2D materials, but it has been almost unexplored in layered hybrid organic-inorganic metal halide perovskites (HOIPs) due to their complex band structure and mechanical properties. Here, we investigate the temperature-dependent microphotoluminescence (PL) of 2D $(C_6H_5CH_2CH_2NH_3)_2Cs_3Pb_4Br_{13}$ HOIP subject to biaxial strain induced by a $SiO_2$ ring platform on which flakes are placed by viscoelastic stamping. At 80 K, we found that a strain of <1% can change the PL emission from a single peak (unstrained) to three well-resolved peaks. Supported by micro-Raman spectroscopy, we show that the thermomechanically generated strain modulates the bandgap due to changes in the octahedral tilting and lattice expansion. Mechanical simulations demonstrate the coexistence of tensile and compressive strain along the flake. The observed PL peaks add an interesting feature to the rich phenomenology of photoluminescence in 2D HOIPs, which can be exploited in tailored sensing and optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Magnetic properties of layered hybrid organic-inorganic metal-halide perovskites: transition metal, organic cation and perovskite phase effects

Understanding the structural and magnetic properties in layered hybrid organic-inorganic metal halide perovskites (HOIPs) is key for their design and integration in spin-electronic devices. Here, we have conducted a systematic study on ten compounds to understand the effect of the transition metal (Cu$^{2+}$, Mn$^{2+}$, Co$^{2+}$), organic spacer (alkyl- and aryl-ammonium) and perovskite phase (Ruddlesden-Popper and Dion-Jacobson) on the properties of these materials. Temperature-dependent Raman measurements show that the crystals' structural phase transitions are triggered by the motional freedom of the organic cations as well as by the flexibility of the inorganic metal-halide lattice. In the case of Cu$^{2+}$ HOIPs, an increase of the in-plane anisotropy and a reduction of the octahedra interlayer distance is found to change the behavior of the HOIP from that of a 2D ferromagnet to that of a quasi-3D antiferromagnet. Mn$^{2+}$ HOIPs show inherent antiferromagnetic octahedra intralayer interactions and a phenomenologically rich magnetism, presenting spin-canting, spin-flop transitions and metamagnetism controlled by the crystal anisotropy. Co$^{2+}$ crystals with non-linked tetrahedra show a dominant paramagnetic behavior irrespective of the organic spacer and the perovskite phase. This work demonstrates that the chemical flexibility of HOIPs can be exploited to develop novel layered magnetic materials with tailored magnetic properties.

cond-mat.mtrl-sci↗

arXiv2024

Odd non-linear conductivity under spatial inversion in chiral Tellurium

Electrical transport in non-centrosymmetric materials departs from the well-established phenomenological Ohm's law. Instead of a linear relation between current and electric field, a non-linear conductivity emerges along specific crystallographic directions. This non-linear transport is fundamentally related to the lack of spatial inversion symmetry. However, the experimental implications of an inversion symmetry operation on the non-linear conductivity remain to be explored. Here, we report on a large, non-linear conductivity in chiral Tellurium. By measuring samples with opposite handedness, we demonstrate that the non-linear transport is odd under spatial inversion. Furthermore, by applying an electrostatic gate, we modulate the non-linear output by a factor of 300, reaching the highest reported value excluding engineered heterostructures. Our results establish chiral Te as an ideal compound not just to study the fundamental interplay between crystal structure, symmetry operations and non-linear transport, but also to develop wireless rectifiers and energy-harvesting chiral devices.

cond-mat.mes-hall↗

arXiv2023

Twist-angle tunable spin texture in WSe$_2$/graphene van der Waals heterostructures

Angle-twisting engineering has emerged as a powerful tool for modulating electronic properties in van der Waals heterostructures. Recent theoretical works have predicted the modulation of spin texture in graphene-based heterostructures by twist angle, although an experimental verification is missing. Here, we demonstrate the tunability of the spin texture and associated spin-charge interconversion with twist angle in WSe$_2$/graphene heterostructures by using spin precession experiments. For specific twist angles, we experimentally detect a spin component radial with the electron's momentum, in addition to the standard orthogonal component. Our results show that the helicity of the spin texture can be reversed by angle twisting, highlighting its critical role on the spin-orbit properties of WSe$_2$/graphene heterostructures and paving the way for the development of novel spin-twistronic devices.

cond-mat.mes-hall↗

arXiv2023

Exchange bias in molecule/Fe3GeTe2 van der Waals heterostructures via spinterface effects

The exfoliation of layered magnetic materials generates atomically thin flakes characterized by an ultrahigh surface sensitivity, which makes their magnetic properties tunable via external stimuli, such as electrostatic gating and proximity effects. Another powerful approach to tailor magnetic materials is molecular functionalization, which leads to hybrid interface states with peculiar magnetic properties, called spinterfaces. However, spinterface effects have not yet been explored on layered magnetic materials. Here, we demonstrate the emergence of spinterface effects at the interface between flakes of the prototypical layered magnetic metal Fe3GeTe2 and thin films of paramagnetic Co-phthalocyanine. Magnetotransport measurements show that the molecular layer induces a magnetic exchange bias in Fe3GeTe2, indicating that the unpaired spins in Co-phthalocyanine develop antiferromagnetic ordering by proximity and pin the magnetization reversal of Fe3GeTe2. The effect is strongest for a Fe3GeTe2 thickness of 20 nm, for which the exchange bias field reaches -840 Oe and is measurable up to approximately 110 K. This value compares very favorably with previous exchange bias fields reported for Fe3GeTe2 in all-inorganic van der Waals heterostructures, demonstrating the potential of molecular functionalization to tailor the magnetism of van der Waals layered materials.

cond-mat.mtrl-sci↗

arXiv2022

Gate-tuneable and chirality-dependent charge-to-spin conversion in Tellurium nanowires

Chiral materials are the ideal playground for exploring the relation between symmetry, relativistic effects, and electronic transport. For instance, chiral organic molecules have been intensively studied to electrically generate spin-polarized currents in the last decade, but their poor electronic conductivity limits their potential for applications. Conversely, chiral inorganic materials such as Tellurium are excellent electrical transport materials, but have not been explored to enable the electrical control of spin polarization in devices. Here, we demonstrate the all-electrical generation, manipulation, and detection of spin polarization in chiral single-crystalline Tellurium nanowires. By recording a large (up to 7%) and chirality-dependent unidirectional magnetoresistance, we show that the orientation of the electrically generated spin polarization is determined by the nanowire handedness and uniquely follows the current direction, while its magnitude can be manipulated by an electrostatic gate. Our results pave the way for the development of magnet-free chirality-based spintronic devices.

cond-mat.mes-hall↗

arXiv2020

Scalable spray-coated graphene-based electrodes for high-power electrochemical double-layer capacitors operating over a wide range of temperature

Advancements in electrochemical double-layer capacitor (EDLC) technology require the concomitant use of novel efficient electrode materials and viable electrode manufacturing methods. Cost-effectiveness, scalability and sustainability are key-drivers for fulfilling product development chain accepted by worldwide legislations. Herein, we report a scalable and sprayable "green" electrode material-based ink based on activated carbon and single-/few-layer graphene (SLG/FLG) flakes. We show that, contrary to commercial reduced graphene oxide, defect-free and flat SLG/FLG flakes reduce the friction of ions over the electrode films, while spray coating deposition of our ink maximises the electrolyte accessibility to the electrode surface area. Sprayed SLG/FLG flakes-based EDLCs display superior rate capability performance (e.g., specific energies of 31.5, 23.7 and 12.5 Wh kg-1 at specific powers of 150, 7500 and 30000 W kg-1, respectively) compared to both SLG/FLG flakes-free devices and commercial-like EDLCs produced by slurry-coating method. The use of SLG/FLG flakes enables our sprayed EDLCs to operate in a wide range of temperature (-40/+100°C) compatible with ionic liquid/organic solvent-based electrolytes, overcoming the specific power limits of AC-based EDLCs. A prototype EDLCs stack consisting of multiple large-area EDLCs, each one displaying a capacitance of 25 F, demonstrates the industrial potential of our technology.

physics.app-ph↗

arXiv2020

Giant-Shell CdSe/CdS Nanocrystals: Exciton Coupling to Shell Phonons Investigated by Resonant Raman Spectroscopy

The interaction between excitons and phonons in semiconductor nanocrystals plays a crucial role in the exciton energy spectrum and dynamics, and thus in their optical properties. We investigate the exciton2 phonon coupling in giant-shell CdSe/CdS core-shell nanocrystals via resonant Raman spectroscopy. The Huang-Rhys parameter is evaluated by the intensity ratio of the longitudinal-optical (LO) phonon of CdS with its first multiscattering (2LO) replica. We used four different excitation wavelengths in the range from the onset of the CdS shell absorption to well above the CdS shell band edge to get insight into resonance effects of the CdS LO phonon with high energy excitonic transitions. The isotropic spherical giant-shell nanocrystals show consistently stronger exciton-phonon coupling as compared to the anisotropic rod-shaped dot-in-rod (DiR) architecture, and the 2LO/LO intensity ratio decreases for excitation wavelengths approaching the CdS band edge. The strong exciton-phonon coupling in the spherical giant-shell nanocrystals can be related to the delocalization of the electronic wave functions. Furthermore, we observe the radial breathing modes of the GS nanocrystals and their overtones by ultralow frequency Raman spectroscopy with nonresonant excitation, using laser energies well below the band gap of the heteronanocrystals, and highlight the differences between higher order

physics.chem-ph↗

arXiv2020

Solution-processed silver sulphide nanocrystal film for resistive switching memories

Resistive switching memories allow electrical control of the conductivity of a material, by inducing a high resistance (OFF) or a low resistance (ON) state, using electrochemical and ion transport processes. As alternative to high temperature and vacuum-based physical sulphurization methods of silver (Ag), here we propose, as resistive switching medium, a layer built from colloidal Ag$_{2-x}$S nanocrystals -compatible with solution-processed approaches. The effect of the electrode size (from macro- to micro-scale), composition (Ag, Ti and Pt) and geometry on the device performance together with the electrochemical mechanisms involved are evaluated. We achieved an optimized Ag/Ti bowtie proof-of-concept configuration by e-beam lithography, which fulfils the general requirements for ReRAM devices in terms of low power consumption and reliable $I_{ON}/I_{OFF}$ ratio. This configuration demonstrates reproducible switching between ON and OFF states with data endurance of at least 20 cycles; and an $I_{ON}/I_{OFF}$ ratio up to 10$^3$ at low power consumption (0.1V readout), which outperforms previous results in literature for devices with resistive layers fabricated from silver chalcogenide nanoparticles.

physics.app-ph↗

arXiv2020

Solution-processed GaSe nanoflake-based films for photoelectrochemical water splitting and photoelectrochemical-type photodetectors

Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudo-direct optical gap. Theoretical studies predicted that its two-dimensional (2D) form is a potential photocatalyst for water splitting reactions. Herein, we first report the photoelectrochemical (PEC) characterization of GaSe nanoflakes (single-/few-layer flakes), produced via liquid phase exfoliation, for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both acidic and alkaline media. In 0.5 M H2SO4, the GaSe photoelectrodes display the best PEC performance, i.e. a ratiometric power-saved metric for HER (Φsaved,HER) of 0.09% and a ratiometric power-saved metric for OER (Φsaved,OER) of 0.25%. When used as PEC-type photodetectors, GaSe photoelectrodes show a responsivity of ~0.16 A W-1 upon 455 nm illumination at light intensity of 63.5 uW cm-2 and applied potential of -0.3 V vs. reversible hydrogen electrode (RHE). The stability analysis of the GaSe photodetectors evidences a durable operation over tens of cathodic linear sweep voltammetry scans in 0.5 M H2SO4 for HER. Viceversa, degradation effects have been observed in both alkaline and anodic operation due to highly oxidizing environment and O2-induced (photo-)oxidation effects. Our results provide new insight into PEC properties of GaSe nanoflakes for their exploitation in photoelectrocatalysis, PEC-type photodetectors and (bio)sensors.

physics.app-ph↗

arXiv2020

Planar Aperiodic Arrays as Metasurfaces for Optical Near-Field Patterning

Plasmonic metasurfaces have spawned the field of flat optics using nanostructured planar metallic or dielectric surfaces that can replace bulky optical elements and enhance the capabilities of traditional far-field optics. Furthermore, the potential of flat optics can go far beyond far-field modulation, and can be exploited for functionality in the near-field itself. Here, we design metasurfaces based on aperiodic arrays of plasmonic Au nanostructures for tailoring the optical near-field in the visible and near-infrared spectral range. The basic element of the arrays is a rhomboid that is modulated in size, orientation and position to achieve the desired functionality of the micron-size metasurface structure. Using two-photon-photoluminescence as a tool to probethe near-field profiles in the plane of the metasurfaces, we demonstrate the molding of light into different near-field intensity patterns and active pattern control via the far-field illumination. Finite element method simulations reveal that the near-field modulation occurs via a combination of the plasmonic resonances of the rhomboids and field enhancement in the nanoscale gaps in between the elements. This approach enables optical elements that can switch the near-field distribution across the metasurface via wavelength and polarization of the incident far-field light, and provides pathways for light matter interaction in integrated devices.

physics.app-ph↗

arXiv2020

Composition, Size, and Surface Functionalization dependent Optical Properties of Lead Bromide Perovskite Nanocrystals

The photoluminescence (PL), color purity, and stability of lead halide perovskite nanocrystals depend critically on the surface passivation. We present a study on the temperature dependent PL and PL decay dynamics of lead bromide perovskite nanocrystals characterized by different types of A cations, surface ligands, and nanocrystal sizes. Throughout, we observe a single emission peak from cryogenic to ambient temperature. The PL decay dynamics are dominated by the surface passivation, and a post-synthesis ligand exchange with a quaternary ammonium bromide (QAB) results in a more stable passivation over a larger temperature range. The PL intensity is highest from 50K-250K, which indicates that the ligand binding competes with the thermal energy at ambient temperature. Despite the favorable PL dynamics of nanocrystals passivated with QAB ligands (monoexponential PL decay over a large temperature range, increased PL intensity and stability), the surface passivation still needs improvement toward increased emission intensity in nanocrystal films.

physics.chem-ph↗

arXiv2020

Octapod-shaped CdSe nanocrystals hosting Pt with high-mass activity for the hydrogen evolution reaction

The design of efficient electrocatalysts for electrochemical water splitting with minimal amount of precious metal is crucial to attain renewable and sustainable energy conversion. Here, we report the use of a network of CdSe branched colloidal nanocrystals, made of a CdSe core and eight CdSe pods (so-called octapods), able to host on their pods Pt particles, and thus catalyzing water splitting reactions. Thanks to the octapod shape, the resulting Pt-hosting network is mechanically trapped onto carbon nanotube buckypaper, providing mechanically flexible and binder-free electrodes. We found that such hierarchical configuration maximizes the mass activity and the utilization efficiency of Pt for the hydrogen evolution reaction (HER). At a potential of -0.15 V vs. reversible hydrogen electrode, the Pt/octapod network-based electrodes display a Pt mass activity on the HER of 166 A mg-1 and 42 A mg-1 in acidic and alkaline media, respectively. These values correspond to turnover frequencies of 168 s-1 and 42 s-1, respectively, which are in that order 14 and 21 times higher compared to commercially available Pt/C benchmarks. The strong chemical and mechanical interactions between the Pt and the octapod surface, along with pod-aided adhesion of the Pt/octapod network to the buckypaper, result in a long-term durability (>20 h) of the HER-activity in both media. These results experimentally prove that the exploitation of our network of branched nanocrystals hosting Pt particles can circumvent the durability issues of the catalysts while adopting either ultralow Pt loadings or benchmarking carbon-supported Pt nanocrystals. Our work opens up prospects for using porous networks made by branched nanocrystals as catalysts with ultralow amount of noble metals and controlled catalytic properties.

physics.chem-ph↗

arXiv2020

Niobium disulphide (NbS$_2$)-based (heterogeneous) electrocatalysts for an efficient hydrogen evolution reaction

The design of efficient and cost-effective catalysts for the hydrogen evolution reaction (HER) is the key for molecular hydrogen (H2) production from electrochemical water splitting. Transition metal dichalcogenides (MX2), most notably group-6 MX2 (e.g., MoS2 and WS2), are appealing catalysts for the HER alternative to the best, but highly expensive, Pt-group elements. However, their HER activity is typically restricted to their edge sites rather than their basal plane. Furthermore, their semiconducting properties hinder an efficient electron transfer to the catalytic sites, which impedes a high rate of H2 production. Herein, we exploit liquid-phase exfoliation-produced metallic (1H, 2H and 3R) NbS2 nanoflakes, belonging to the class of metallic layered group-5 MX2, to overcome the abovementioned limitations. Both chemical treatment with hygroscopic Li salt and electrochemical in operando self-nanostructuring are exploited to improve the NbS2 nanoflake HER activity. The combination of NbS2 with other MX2, in our case MoSe2, also provides heterogeneous catalysts accelerating the HER kinetics of the individual counterparts. The designed NbS2-based catalysts exhibit an overpotential at a cathodic current of 10 mA cm-2 (n10) as low as 0.10 and 0.22 V vs. RHE in 0.5 M H2SO4 and 1 M KOH, respectively. In 0.5 M H2SO4, the HER activity of the NbS2-based catalysts is also superior to those of the Pt/C benchmark at current densities higher than 80 mA cm-2. Our work provides general guidelines for a scalable and cost-effective exploitation of NbS2, as well as the entire MX2 portfolio, for attaining a viable H2 production through electrochemical routes.

physics.chem-ph↗